Used Kuper Fwj 920 for sale (59)

Condition: new, functionality: fully functional, For efficient and clean joining of smaller quantities of veneer. A special KUPER glue thread is applied to the joint in a zigzag line. Easy and simple to handle, ready for use quickly, and features low power consumption. Gbodpfoxdxbfjx Ad Isp All the advantages of the KUPER glue thread. An ideal device for assembling smaller quantities of veneer. The device is supplied fully equipped (ready to connect) with a 2.75 m connection cable (for 230V mains voltage). Net weight: 1.9 kg Gross weight: 2.4 kg Standard accessories: 1 test spool of original KUPER glue thread type K 12, 10 threaders Glue thread available on request! Item no. 0121383

Condition: new, functionality: fully functional, Standard equipment: - Pneumatic clamping via 2 external clamping cylinders - Saw carriage guided by 2 high-precision linear guides - Extraction device for connection to a dust extraction system, connection diameter 100 mm - 1 carbide-tipped saw blade, diameter 200 mm Gbodpfx Adoxd Sf Re Iep - Front support, 250 mm wide, fixed installation, manually adjustable with planing unit - Maintenance unit Opening height: 57 mm Veneer pack cutting height: 32 mm Three-phase motor: 2.2 kW Operating voltage: 230/400 V Item no. 0174200

Condition: used, used manufactured by Kuper type Mini 420 range 420 mm thread heating system electrical - new desk model required space ca. l x w x h mm 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck - without guarantee and guarantee Gedpfsvwf Dwox Ad Iobp

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, total length: 3,950 mm, total width: 1,220 mm, total height: 1,610 mm, overall weight: 1,900 kg, Fully automatic large-format edge polishing machine with CNC control and pivoting milling/polishing unit for finishing sawn or pre-milled surfaces. The machine is suitable for transparent, technical, or decorative plastics (PMMA, PC, PETG, etc.) as well as for the processing of composite materials (PMMA with paper or aluminum). The required process parameters can be conveniently retrieved via the integrated material library, based on the material to be processed and the desired surface finish. A tool recommendation and the corresponding setup for the specific operation are also displayed. The high precision of the polishing table significantly reduces the formation of streaks during processing. Additional mounting points for side stops or further guiding aids allow for flexible adaptation to any product. Specific features: - CNC control with material library - Machine body and front stop - Milling/polishing unit - Working area - Multifunctional table - Tools Technical data*: Material thickness (0°/45°/60°): 2 - 120/85/60 mm Material length: 20 - 3,050 mm Godpfxsxd Si As Ad Iobp (with turnover) up to 6,100 mm Table width: 525 mm Pivot range: 0° - +63° Milling depth (0°/45°/60°): 0.05 - 1.5/3/3 mm Spindle speed: 6,000 - 12,000 rpm Feed speed: 0.1 - 5 m/min Return speed: 50 m/min Number of clamping cylinders: 6 (optionally up to 20) Number of side stops: 1 (optionally up to 8) Extraction port Ø: 100 mm Machine length: 3,950 mm Machine width: 1,220 mm Machine height: 1,610 mm Working height: 926 mm Compressed air supply: 6 bar Operating voltage: 400 V, 50 Hz, +PE +N Milling motor power: 4.5 kW Drive motor power: 1.2 kW Total power: 7.5 kW Weight: 1,900 kg Tool type: EURACRYL ES with quick-change system Vacuum table: Included Remote maintenance: Included Tool holder: Included (1x tool holder for 4 inserts) Tool: Not included *Subject to material tests, depending on material type, tool equipment, and surface finish Scope of delivery: - 1 operating manual Item no. 0175200

Condition: new, functionality: fully functional, For repairing and cross-gluing veneers. Damaged or torn veneers are reliably repaired with the simplest handling. Combined veneer strips achieve optimum tear resistance thanks to end cross-gluing. The perfect design fully utilizes the advantages of the KUPER glue thread. The practical construction of the device allows immediate use without extensive training. After an approximate preheating period of 5 minutes using the temperature controller (sold separately), the KHL 1 is always ready for operation. Light pressure is sufficient to efficiently apply the glue thread to the veneer sheet. Smooth operation is ensured by maintenance-free use. Net weight: 1.2 kg including 1 spool of glue thread 1.8 kg with temperature controller Gross weight: 2.5 kg Standard accessories Gedoxdxk Hopfx Ad Iobp 1 test spool of original KUPER glue thread type K 3, 10 threaders, 1 operating manual, item no. 51204 Item No. 0132771

Condition: new, input voltage: 400 V, input frequency: 50 Hz, For joining veneers with thicknesses ranging from approximately 0.3 to 3.0 mm. The machine uses a special glue thread, which is applied in a zigzag line over the joint. High adhesion and tensile strength ensure tight joints even with wavy veneers. During subsequent pressing, the glue thread is embedded internally, thus eliminating the need for sanding the adhesive medium. Specific features: Gbjdpfx Aexdxcced Ijp * Torsion-resistant C-frame design made of steel * Stainless steel worktable * Standard heating system * SP control system * Pneumatically regulated adhesive pressure * Disc wheel system with tolerance compensation for various veneer thicknesses * Adjustable heating performance for both idle and processing modes * Tool-free adjustment of the adhesive pressure roller * Fully automatic start/stop function via photoelectric sensor Technical data: Throat depth: 1250 mm Feed: 4 speeds, approx. 15, 30, 45, 60 m/min Veneer thickness: approx. 0.3 – 3.0 mm Operating voltage: 400 V, 50 Hz, 3 phase Compressed air connection: R 1/4'' Compressed air consumption: approx. 7 NL/min Total connected load: approx. 3.1 kVA Standard accessories: 1 test spool of original KUPER glue thread type 1220 10 threaders 103071 1 kg release agent 105661 1 set of tools, 1 operating manual Glue thread offers available upon request! Art. No. 0149650

Condition: new, functionality: fully functional, - Device for unrolling and moistening joint paper; including operating manual - for use with joint paper up to 20 mm wide Required joint paper available on request! Gedpfxjxd Sldo Ad Ijbp

Condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, OUR BESTSELLER – 1000 mm Throat Depth Godpoxdxktjfx Ad Ijbp Veneer splicing machine for gluing veneer strips including glue application unit with nearly horizontal glue application disc. Perfect in combination with glue cooling system (optional). NEW INDUSTRY 4.0 All essential machine and performance parameters are recorded, transmitted and made available centrally for analysis (optional). Additional modules for monitoring power and compressed air consumption available (optional). SPECIFIC FEATURES - Innovative veneer feeding system with disc wheels and tolerance compensation mechanism for jointing without offset - Low-maintenance, energy-saving, and veneer-friendly high-performance plastic chains (excellent sliding properties, minimal heat conduction, and no discoloration) - 12 mm slim, chrome-plated heating rails ensure minimal stress on veneer due to shrinking, and significantly reduced energy consumption - Intelligent automatic energy management for standby and operating mode - Intuitive control panel with all key functions at a glance, parameter memory TECHNICAL DATA* Throat depth: 1,000 mm Veneer thickness: approx. 0.35 – 2.5 mm, optionally from approx. 0.25 mm, optionally up to approx. 5.0 mm Veneer lengths: from approx. 300 mm Veneer width: from approx. 35 mm Feed speed: steplessly adjustable from 12 – 55 m/min Operating voltage: 400 V, 50 Hz, 3 Ph + N + PE Total connected load: 4.1 kVA Air consumption: approx. 5 NL/min at 6 bar *Subject to material testing, depending on wood species and micro or thick veneer package (option) only without micro and thick veneer package (option) GLUES Suitable for urea resin adhesive Glue offer available on request! Item No. 0164700

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 2,400 mm, space requirement length: 9,000 mm, working width: 1,600 mm, Crosswise Veneer Splicing Machine / Cross Splicing Machine Manufacturer: Kuper Model: ACR CrossRunner 1600 Year of manufacture: 2007 Narrow cross splicing machines for pre-glued veneer strips with a small working width. The machine operates significantly faster in cross-feed mode compared to longitudinal machines and is thus an economical alternative, for example, for cross-veneered interior doors or smaller furniture parts. Working width: 1600 mm (along the grain) Veneer strip width: from approx. 60 mm Gbedpfjyayumox Ad Isp Veneer thickness: approx. 0.3 - 2.5 mm Feed speed: approx. 30 m/min Suitable glues: PVAc or urea glue With automatic stacking Control: Siemens Simatic with touch display Voltage: 400 V, 50 Hz, 3 Ph Rated current: 16 A Overall dimensions (W x L): approx. 2400 x 9000 mm