Used Fkd 60 for sale (21,493)

Condition: good (used), Year of construction: 2014, functionality: unexamined, machine/vehicle number: 68235-1411-265, overall weight: 1,600 kg, total height: 2,850 mm, total length: 1,415 mm, total width: 1,415 mm, space requirement height: 3,200 mm, type of input current: AC, Equipment: type plate available, We are offering this used Lang Technik Eco Tower 60 automation system, manufactured in 2014. Year of manufacture: 11.2014 Serial number: 68235-1411-265 Type: Eco Tower 60 Article number: 68235 in good used condition, consisting of: Itsdpfszvc Rhox Abnok 1 ECO FEED component placement machine, manufactured in 2014 1 ECO TOWER 60 component placement tower, manufactured in 2014 40 Eco Grip vises, size 77, base body made of steel 20 Eco Grip vises, size 77, base body made of aluminum 4 Eco Grip vises, size 125 1 Vise carriage 1 LANG Quick-Point clamping tower 1 Pneumatic interface between handling system and clamping tower 1 Operating manual and installation guide The automation system is available immediately! Inspection is possible at any time! If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2004, operating hours: 28,082 h, travel distance X-axis: 800 mm, travel distance Y-axis: 620 mm, travel distance Z-axis: 520 mm, controller model: Siemens 840 D, spindle speed (max.): 13,000 rpm, The control system (PCU 50) was replaced in March 2024! The machine spindle was replaced after approximately 5,500 operating hours! Tools are included in the offer! TECHNICAL DETAILS Itjdpfx Ajzvl Tfjbnjk Travel range X-axis: 800 mm Travel range Y-axis: 620 mm Travel range Z-axis: 520 mm Spindle speed: 13,000 RPM Number of tool positions in the tool magazine: 30 MACHINE DETAILS Control system: Siemens 840 D Operating hours Control system operating hours: 60,150 h Machine operating hours: 56,860 h Spindle operating hours: 28,082 h Spindle replacement at: 5,500 h EQUIPMENT Tools 4th axis Hofmann RW/NC160 Oil mist extraction system Belt filter system with internal cooling at 20 bar with a dual-stage filter Documentation Hedelius + Siemens Sinumerik Infrared probe Renishaw

Condition: excellent (used), Year of construction: 2014, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 530 HSC, overall weight: 10,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,000 h, coolant supply: 40 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, 5-axis universal machining center DMG Deckel Maho DMU 60 EVO Year of manufacture: 2014 Control system: Heidenhain TNC 530 HSC Operating hours: 16,000 h Itjdpszut Inefx Abnok Spindle hours: approx. 3,000 h – spindle was replaced in 2025 Technical data: Spindle speed: 10 - 18,000 rpm Drive power: Spindle torque: Tool holder: HSK 63 Number of magazine positions: 60 Coolant through-spindle – internal coolant system: 40 bar Travel ranges: X-axis: 600 mm Y-axis: 500 mm Z-axis: 500 mm A-axis: -10 / +110° B-axis: 0.001° Accessories: - Knoll coolant system 40 bar with paper band filter - Spindle oil cooler - Chip conveyor - 3D probe - Blum laser

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 500 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, Tool changer with 60 positions Spindle speed 12,000 rpm Iedpozva Uwsfx Abnotk Heidenhain iTNC 530 control unit Internal coolant supply (ICS) Chip conveyor 3D quickset

Condition: new, Face plate: diameter 3000mm, max. Weight of the workpiece 12 tons, length adjustment 2000 mm, rapid traverse 10000 mm / min., Stepless feed 0 - 5000 mm / min., Max. Torque on the face plate 50000 Nm, speed - continuously adjustable 0 - 80 U / min. Milling unit: diameter of the milling cutter 4600mm, depth of the milling groove 1300 mm, axial adjustment of the milling machine 320mm, axial positioning speed for milling machine spindle 0,5-140 mm/min., Milling cutter positioning 0,1 degrees; Speed ​​infinitely adjustable 0,0 - 10 U/min., Itedpswy Rxkefx Abnok Max. Torque on the cutter 315000 Nm. Made in the EU.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, turning length: 1,040 mm, turning diameter: 580 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 1,040 mm, TECHNICAL DETAILS Turning diameter: 580 mm Turning length: 1,040 mm Spindle speed: 3,500 rpm Travel range X-axis: 2,500 mm Travel range Z-axis: 1,040 mm Iedpfx Abozu Rzrjnjtk Tailstock diameter: 85 mm MACHINE DETAILS CNC control: Fanuc 18T-C Dimensions & Weight Dimensions (L × W × H): 4,650 × 2,320 × 2,060 mm Machine weight approx.: 7,200 kg EQUIPMENT VDI turret with 12 driven tool stations Chip conveyor Machine without tailstock Foot switch Chuck Turning chuck

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 SD Year of manufacture: 2012 Pressing force: 60 tons Voltage: 400 Max. bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2400 kg Itedpozuxrxofx Abnjk Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Dimensions of the feed opening: 115 cm wide x 80 cm deep x 55 cm high The DIXI 60 SD features simple operation, an automatic start function, and automatic bale ejection. Thanks to its compact, low-profile design, this machine is ideal for spaces with limited height.

Condition: good (used), Year of construction: 2025, Universal machining center Machine type: DMG Mori DMX 60 U Control: Siemens Sinumerik One mit Celos X Year: 2025 Ijdpfx Aszu R D Tsbnjtk SPECIFICATIONS X-Axis: 600 mm Y-Axis: 600 mm Z-Axis: 510 mm B-Axes: -15°/+110° C-Axis: 360° Rapid motion: (X/Y/Z): 42 m/min. Spindle speeds: 20 -15.000 rpm Spindle power: 20 / 14,5 kW Torque: 121 Nm Tool: SK 40 Tool capacity: 60 NC-panning and rotary Table Table size: 630 x 500 mm Equipment Chip conveyor Production Package Internal cooling: 40 bar Cooling tank: 600 l paper band filter Electronical handwheel Direct linear scales Preparation for Hydraulic and Pneumatic Connections Air blow Oil mist separator Caliper: Renishaw PP40 3D-Touch probe: 3d quickSET Working mode: 4

Condition: used, Year of construction: 2013, number of controlled axis 6 STK Ijdpfx Aezupmgebnetk workpiece weight 60 kg throat 820 mm weight of the machine ca. 0,665 t dimensions of the machine ca. 30 m³ The KR 60-3 industrial robot is a front-runner in its class thanks to its high flexibility and long reach with optimum load capacity. KUKA robot type: KR 60-3 Installation position: Floor Number of axes: 6 Maximum load of the robot: 60 kg Maximum reach: 2230 mm Repeatability: ± 0.06 mm Control system: KR C4 Weight approx. 665 kg Robot movement speed Axis 1: 128 °/s Axis 2: 102 °/s Axis 3: 128 °/s Axis 4: 260 °/s Axis 5: 245 °/s Axis 6: 322 °/s Axis range (in º) Axis 1: ±185 ° Axis 2: -135 ° / 35 ° Axis 3: -120 ° / 158 ° Axis 4: ±350 ° Axis 5: ±119 ° Axis 6: ±350 °

Condition: excellent (used), Year of construction: 2022, Available immediately. Behringer LPS 60 TA, manufactured in 2022, in excellent condition. This is a very special band saw; it operates fully automatically! - Auto feed control with cut monitoring - Saw band drive 5.5 KW - 10-120 M/min - 54 mm band - Clamping device for saw sections - Line laser Advantages of the LPS-TA table band saw Unsurpassed precision and cutting performance High cutting accuracy, smooth running, and long band life are due to the special, torsion-resistant design of the saw frame. Unique feature: the force transmission of the saw feed is located directly below the cutting point. Advantages in material procurement By producing flat materials from large sheets, efficiency gains can be achieved in both storage and the purchase of raw materials. Clamping device for layered cuts (option) For sawing larger batch sizes, sheets can be stacked in layers and securely held in place using the optional vertical additional clamping device. Chip conveyor as standard Below the saw unit, directly in the direction of chip flow, there is a large-sized chip conveyor with an integrated coolant tank. Chips and coolant are collected and separated in this tank. For cleaning and maintenance work, the conveyor can be extended out of the machine frame. Powered duplex chip brushes effectively clean the saw band, thereby increasing tool life. The brushes are automatically adjusted to the saw band and ensure consistent cleaning performance. Automatic feed device Through the combination of an NC-controlled feed device and intelligent control, sheets can be separated into strips fully automatically. Servo feed system The use of the Behringer servo feed system creates a constant chip removal rate and utilizes the performance of modern saw bands more effectively. The rapid response of the servo feed system to the sensors of the cutting pressure control consistently prevents overloading and premature wear of the saw bands. Quick saw band change ensures the shortest possible setup times. In just two to three steps, the saw band can be moved to the change position. Band-guiding parts made of gray cast iron are made by Behringer and ensure vibration damping directly at the cutting point, thereby increasing tool life. Iedozubxhepfx Abnstk Compact Due to its compact dimensions, the table band saw can be installed even in confined spaces. Movable material support table For easy loading and unloading by crane, the material table can be extended out from under the saw unit.

Condition: refurbished (used), functionality: fully functional, inspected and tested Ijdpfx Aszvfarsbnstk

Condition: used, Year of construction: 2016, operating hours: 1,171 h, functionality: fully functional, load capacity: 60 kg, arm reach: 2,050 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, teach pendant model: FlexPendant, ABB IRB 4600-60/2.05 – 6-axis industrial robot with IRC5 controller and FlexPendant The ABB IRB 4600-60/2.05 industrial robot is designed for demanding production applications and process automation. Its 60 kg payload capacity and 2050 mm reach provide high dynamic performance, high rigidity, and excellent positioning accuracy. The offered set comes from the research and development (R&D) department and includes a complete system ready for integration. The robot is ideal for applications such as: - CNC machine tending, - transferring and manipulating parts, - assembly, - packaging, - palletizing, - vision systems, - grinding and surface finishing, - R&D workstations. The set includes: - ABB IRB 4600-60/2.05 robot, - ABB IRC5 controller, - ABB FlexPendant operator panel, - complete set of robot cables. Itodpfozkbpfex Abnek The robot has the following licenses: Advanced Robot Motion, Absolute Accuracy, PROFINET Controller/Device, World Zones, Independent Axis, Path Recovery, Path Offset, Collision Detection, PC Interface, FlexPendant Interface, Multitasking, Sensor Interface, UDPUC Driver, Externally Guided Motion (EGM). Technical condition The robot starts up correctly and communicates with the IRC5 controller. The operator panel displays message 38200 – Battery backup lost. This indicates a loss of power to the battery that supports the encoders (SMB Battery). This is a typical message after the battery has been discharged or disconnected and does not indicate a defect in the robot. After replacing the battery, a calibration/axis synchronization procedure will be necessary. Duty Time Counter: 1171 h Specification Manufacturer: ABB Model: IRB 4600-60/2.05 Year of manufacture: 2016 Payload: 60 kg Reach: 2050 mm Number of axes: 6 Controller: IRC5 Operator panel: ABB FlexPendant RobotWare: 6.08.00.01 Condition: used We provide a start-up guarantee.

Condition: excellent (used), Year of construction: 2024, operating hours: 3 h, functionality: fully functional, Single-shaft shredder Vespa 40/60 VGA, manufactured in 2024, 3 operating hours for test run, 16 blades on the shaft, hole size 15 mm, shaft length 590 mm, power 15 kW, weight 1620 kg, serial number 990. Itodpfxszqtdno Abnjk

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, DOOR PRODUCTION LINE CMS PRO EVOLUTION TWIN 60 Year 2011 This machine has a very low number of working hours, wrong investment by client . The machine is connected and can be inspected in Poland at any time after agreement. For all technical information please click below on included PDF document . Iedezr H Tfepfx Abnetk

Condition: refurbished (used), functionality: fully functional, warranty duration: 12 months, overall weight: 1,300 kg, input voltage: 380 V, input frequency: 50 Hz, Cutter Laska – type: K 60 Itjdezunxbepfx Abnok Capacity: 60 liters with 2 speeds; Dimensions: 1400 mm x 1400 mm x 1600 mm.

Condition: used, Year of construction: 2008, operating hours: 6,848 h, functionality: fully functional, machine/vehicle number: 11580008023, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: Heidenhain iTNC 530, total height: 2,260 mm, total length: 22,950 mm, total width: 2,100 mm, table width: 600 mm, table length: 1,000 mm, table load: 200 kg, rotary table diameter: 600 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 24, tool length: 315 mm, tool diameter: 130 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Deckel Maho DMU 60 is a universal 5-axis CNC machining center designed for precise milling and complete machining of complex components. This machine is part of the renowned DMU series by DMG Mori (formerly Deckel Maho) and is widely used in toolmaking, mechanical engineering, mold making, as well as the aerospace industry. Thanks to the swiveling milling head (B-axis) and NC rotary table (C-axis), workpieces can be machined on five axes, enabling the production of complex geometries in a single setup. Itodpfx Abeyt Ibnsnok Previous application conditions: General machine/tool parts in steel, aluminum, cast iron, etc. Heidenhain iTNC 530 control HSK-A 63 tool holder The stated price is exclusive of dismantling, packaging, and shipping. Sale is from location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Condition: good (used), Year of construction: 2001, screw diameter: 30 mm, clearance between the columns: 420 mm, injection pressure: 1,995 bar, injection weight: 96 g, mold height (min.): 200 mm, General information: Year of manufacture: 2001 Control system: NC4 Weight: 3950 kg Dimensions (length × width × height): 4.2 × 1.4 × 2.0 m Injection unit: Type: … / 200 Screw diameter: 30 mm Screw L/D ratio: 20 Specific injection pressure: 1995 bar Injection volume: 106 cm³ Injection shot weight: 94 g Clamping unit: Type: 60 / … Itsdpfezt Ivdsx Abnsk Clamping force: 60 t Platen dimensions: 600 × 600 mm Distance between tie bars: 420 × 420 mm Mold height: 200 mm Opening stroke: 550 mm Maximum platen distance: 750 mm

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, pressing force: 60 t, bale length: 1,100 mm, bale width: 800 mm, bale height: 1,200 mm, bale weight: 450 kg, total width: 2,100 mm, total height: 2,150 mm, total length: 4,870 mm, overall weight: 5,000 kg, power: 11 kW (14.96 HP), DIXI SLS 60, working condition, little bit modified, added full wall for pushing the bale out, detailed information in attachment, last two pictures is from 07.2026 Itodpfx Ajzi A Iyjbnek

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Itsdsy Iwlajpfx Abnsk Inspection under power possible at any time! Technical specifications as per the pictures! Machine is immediately available!

Condition: used, Year of construction: 2017, FAST, COMPACT AND VERSATILE INDUSTRIAL ROBOT Itjdpfxozrl Axj Abnok IRB 4400 is an extremely fast, compact robot for medium to heavy handling. It has exceptional all-round capabilities which makes it suitable for a variety of manufacturing applications. The load capacity of 60 kg at very high speeds usually permits handling of two parts at a time.

Condition: excellent (used), Year of construction: 2016, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 565697, type of input current: three-phase, input voltage: 400 V, belt width: 600 mm, conveyor belt width: 600 mm, The Wagner non-ferrous metal separator (NE separator), model 0429 from Wagner Magnete, is one of the manufacturer’s high-performance eddy current separators. Working width: 600 mm. • Throughput: depends on the material and grain size. • Rotor speed: up to 3,000 revolutions per minute. Itsdpfezl Rfxex Abnek • Belt speed: 0.5 to 2.0 m/s. • Weight: 1.2 tons. • Rotor system: Eccentrically mounted with a high pole-changing frequency. • Rotor drive: 4 kW; belt drive: 1.5 kW. The machine and the associated control panel are included in the delivery. The machine was in operation at an R&D center in Israel. As the company now operates a production facility in Europe, the R&D center will be closed. The machines will be transported to Europe at the owner’s expense and can be delivered EXW at a port or in the production facility. The details for optimal transport need to be clarified. The machine price is quoted without packaging on a pallet.

Condition: excellent (used), Year of construction: 2002, Consisting of: - 2 pieces hardening furnaces 10 Cg gross weight 400 kg Itodpfx Aezvfluebnok - 1 piece of nitriding oven 8 Cg gross weight 400 kg - 1 piece spray washing machine - 2 pieces tempering furnaces - 1 piece of oil quench bath 5000 liters - 1 piece manipulator All technical data for the individual systems can be found in the attached pictures.

Condition: used, Year of construction: 2004, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, feed length X-axis: 600 mm, feed length Y-axis: 560 mm, feed length Z-axis: 500 mm, controller manufacturer: Siemens, spindle nose: DIN 40, number of slots in tool magazine: 180, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMC 60 H – 4-Axis Horizontal Machining Centre – 2004 Siemens CNC – 6 pallets – 180 tools – 20,000 hours A company in the aerospace sector is selling a DECKEL MAHO DMC 60 H 4-axis horizontal machining centre, year 2004, currently available for inspection under power and in production. Specifications: • CNC control: Siemens • Travels: X 600 / Y 560 / Z 500 mm • Tool magazine: 180 tools • Taper: DIN 40 • 6 pallets • Through-spindle coolant • Tool probe • Workpiece probe • Chip conveyor • Complete documentation • Low hours: only 20,000 hours • Visible under power and in production Itodpfx Abjy D A Rgjnsk • Currently machining aerospace components • Test possible by appointment If you have any questions or need further information, please feel free to send us a message or call.

Condition: used, Year of construction: 1975, functionality: fully functional, power: 33.1 kW (45.00 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 60 t, stroke length: 140 mm, throat depth: 280 mm, We are offering this used Osterholt EXPA 60 eccentric press, manufactured in 1975, for sale. Machine number: 873368 Type: EXPA 60 Pressing capacity: 60,000 kg Stroke length: 280 mm Minimum ram height: 100 mm Adjustable ram: 60 mm Adjustable stroke: 10–140 mm Motor power: 45 hp Mains voltage: 380 V Iodpfx Abjzlgz Nonjtk If you have any questions or would like more information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2011, functionality: fully functional, Discover the used 5-axis machining center DECKEL MAHO DMU 60 eVo, manufactured in 2011. This machine is equipped with a Siemens control system and, thanks to features such as internal cooling, a measuring probe, and laser measuring, offers the highest precision for complex manufacturing tasks. A very well-maintained and immediately ready-for-use machining center for demanding users. Technical data of the Deckel Maho DMU 60 eVo: Travel in X-axis (mm) 650 Travel in Y-axis (mm) 500 Travel in Z-axis (mm) 500 Travel in B-axis -5/+110 C-axis nx360 Number of axes 5 Spindle speed (rpm) 14000 Spindle power (kW) 18.9 Tool interface SK40 Weight (kg) 10000 Machine hours (h) 15995 Year of manufacture 2011 Control system Siemens 840D SL Iedpezq Eghjfx Abnetk Control type CNC Total power requirement (kW) 50 kVA Weight (kg) 10000 kg Location Baden-Württemberg Delivery September 2026 Equipment and accessories: -Internal cooling -Chip conveyor -Laser measuring -Measuring probe -3D-quickSET for checking and correcting the 4- and 5-axis kinematics -Band filter -Used tool holders -Coolant gun