Used Felder Bf 6 26 for sale (131)

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm Hfjdsxlt Shepfx Ag Ijg

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Hfsdpfjyzdnbsx Ag Ijg Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: used, Year of construction: 1991, machine/vehicle number: 78-08/093-91, functionality: fully functional, planing width: 400 mm, Combined Planer Thicknesser Felder AD 6-41 Year of manufacture: 1991 S/N 78-08/093-91 In good condition Planing specifications Planing width: 410 mm Thicknessing width: 404 mm Thicknessing height: approx. 4 – 220 mm Maximum chip removal: 5 mm Cutter block / cutting data Cutter block diameter: approx. 86 mm Number of knives: 2 Cutter block speed: approx. 4,700 rpm Table / Construction Total length of planing tables (standard): approx. 1,680 mm Feed Feed speed: stepless, approx. 6.5 m/min with digital height adjustment Electrical data Hfedsywfbuspfx Ag Ieg Motor power: 4.0 kW (5.5 HP) Voltage: 400 V three-phase (typical for this series) Extraction connection approx. 120 mm Weight approx. 800 kg

Condition: used, FORMAT 4 Kappa V60 Panel Saw - used - Welded frame with extremely high rigidity, automatically retracting support slats, stable locking of the saw carriage at top and bottom, control panel at eye level, digital readout on the longitudinal stop, digital display for horizontal cuts, strip cutting device, lift-roller transport system, edgable support surface, dust extraction unit TRK, dust-tested ----- Technical Data ----- Hodpjy Sazrjfx Ag Isfg Cutting length: 4,300 mm, Cutting height: 2,200 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Motor: 3 kW, Extraction port Ø: 2x 100 mm, Space requirement (LxWxH): 5,600 x 1,700 x 3,000 mm

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Hsdpfx Agoxg Igis Isfg

Condition: ready for operation (used), Year of construction: 2019, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, For sale: A Felder Format4 Tempora F600 edge banding machine in very good condition. The machine comes from a professional interior construction workshop and has always been properly maintained and carefully used. The Tempora F600 is renowned as a highly reliable industrial edge bander with a high processing speed (10/18m) and excellent finishing quality. The machine is functioning perfectly and can be put straight into operation. Specifications: Brand: Felder Model: Format4 Tempora F600 Year of manufacture: 2019 Features include: - Smartouch touchscreen control - Program settings with memory function - Anti-adhesive glue application unit - Pre-milling unit - For panels up to 60mm thick - Top and bottom radius trimming unit - Corner rounding unit Hfodpfx Ajy R I Rfsg Isg - Radius scraper unit - Flat scraper unit - Glue residue cleaning unit - Buffing unit - Automatic infeed Suitable for processing: - ABS edge banding - PVC edge banding - Veneer edging - Solid wood edge strips Condition: Machine is in excellent technical and visual condition, has always been regularly serviced and cleaned in a professional workshop. Delivery: Machine can be collected as shown in the photos. Inspection: Viewing possible by appointment in Rijnsburg. Transport: To be arranged by the buyer. Available from mid-July. Asking price: € 32,490 excl. VAT.

Condition: excellent (used), For sale is a used Felder KFS-36 circular saw and milling machine with 3 milling speeds. The machine is in very good condition and has been refurbished and inspected by our specialized staff. (Fully operational) Technical specifications: - Tiltable circular saw and milling spindle 90-45° - Cast iron sliding table with mitre fence - Outrigger table - 3 milling speeds: 3800/6100/7800 rpm - Boring support - 3 motors, each 2.2 kW / 3 HP The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Hfsdpjy Nmq Iefx Ag Isg Related terms: saw, circular saw, spindle moulder, combination machine, combi machine, milling machine Reference: R-C0723

Condition: used, Year of construction: 2014, functionality: fully functional, Technical data of the Felder G 560: Edge thickness: 0.4–5 mm (coil and strip material) Workpiece height: 8–60 mm Workpiece width: min. approx. 70 mm Feed speed: approx. 12 m/min Glue pot: interchangeable glue pot for EVA and PUR adhesives (hot-melt adhesive) Units: Jointing unit with diamond-tipped spiral cutters End trimming unit Combination milling unit (flush/radius/chamfer) Surface scraper Operation: Felder Quick-Set system Weight: approx. 790 kg Hfsdpfx Aey R Afwog Iog

Condition: used, Year of construction: 2011, total height: 1,600 mm, total length: 3,250 mm, total width: 1,000 mm, Colour: Grey Weight: 1.250 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 7 - └ 1st unit type: - - Tools available: Yes - └ 3rd unit type: - - Tools available: Yes - └ 4th unit type: - - Tools available: Yes - └ 5th unit type: Hjdjyu Thcopfx Ag Iofg - - Tools available: Yes - └ 6th unit type: - - Tools available: Yes - └ 7th unit type: - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 18.6 - Fuse [A]: 25 - Power [kW]: 7.2 - Transport dimensions: 3250mm x 1000mm x 1600mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Felder TEMPORA F600 edge bander with glue box Liquids Pre-milling cutters, Glue application with roller, Interchangeable glue tank Second tank included Features glue box, enabling edge banding with PUR glue Pneumatic pre-cut guillotine Liquids End-trimming sawblades Top/bottom trimming unit Corner rounding unit, Profile scraper Cleaning fluids Flat scraper Polishing unit The machine has NC control Max workpiece height: 60mm Hfedpfx Agoy N Sdys Iog Max edge banding thickness (roll): 3mm Feed rate: 10 m/min Original working distance: 30,000 meters, in my opinion the technical condition is very good Year: 2023 Possibility to inspect and test on site

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Edge banding machine Tempora F 60.06 - Year of manufacture: 2018 - Exchangeable glue pot - Units for pre-milling, end trimming, flush cutting, milling, radius scrapers, surface scrapers, buffing wheel - With separation agent and cleaning agent application - Spray device - Edge thickness: 0.4-6 mm Hfedpfjx Ha I Ujx Ag Isg - Installation length: 3220 mm - Saw trimming Transport possible at extra cost!

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. • Control system: x-motion PLUS • Chain feed • Feed speed: 10 m/min • Drive motor: 0.75 kW (S6) – 1.1 kW (S6) • Minimum workpiece length: 140 mm • Minimum workpiece width: 70 mm • Note: Minimum width varies depending on workpiece length, height, and surface finish. • Turntable edge magazine (rolled edge material) • Turntable diameter: 750 mm • Edge thickness: 0.4 – 3 mm • Extendable frame • Workpiece support extendable up to 450 mm • Upper pressure bar • Manually adjustable workpiece height: 8 – 60 mm • Edge feed • For rolls and rigid material • Joining unit • Power: 2.2 kW (2 × 1.1 kW) • Diamond cutter Z2 • Speed: 12,000 rpm • Gluing unit • Teflon-coated for 1.5 kg EVA or PUR granulate • Ready after approx. 10 min heating time • Tool-free quick-change system • Pressure unit • Pneumatically controlled • 1 driven and 2 conical pressure rollers • Shear • For roll edge material thickness: 0.4 – 3 mm • Cutting unit Hodpfxex D D R Se Ag Ijfg • Two high-frequency motors, each 0.35 kW, 12,000 rpm • Pneumatically swiveling 0° – 10° • Multifunctional milling unit (x-motion PLUS) • Flush and radius milling • One HF motor top and bottom, each 0.75 kW, 12,000 rpm • Each with 4 interchangeable blades • Corner processing unit • For soft and postforming workpieces • Front edge processing • Edge thickness: 0.4 – 3.0 mm • Workpiece height: 10 – 60 mm • Radius scraper unit • 2-axis motor-driven, position-controlled • Pneumatic release function • Polishing unit • Top and bottom

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Edgebanding machine with jointer and corner rounding unit Hfedpfx Aeyx Ew Esg Isg Very well-equipped and hardly used edgebanding machine in robust construction, ideal for precise and efficient edge processing in woodworking trades. Equipment: • Jointer unit with 2 counter-rotating diamond cutters • Edge feed for coil and strip material • Glue unit with glue roller • Pre-end trimming unit (roller) • Pressure unit for optimal pressing • End trimming unit with pulling trimming cut • Flush and radius milling unit • Corner rounding unit for end edges • Radius scraper unit • Surface scraper • Polishing unit • Manual unit adjustment • Control panel with LCD display and keypad • Extendable workpiece support Technical data: • Edge thickness: 0.4 – 5 mm • Workpiece height: 8 – 60 mm • Min. workpiece width: 70 mm • Min. workpiece length: 140 mm • Feed speed: 11 m/min • Extraction port: 120 + 2 × 80 mm • Weight: approx. 990 kg • Approx. dimensions (L × W × H): 4550 × 1550 × 1100 mm

Condition: like new (used), Year of construction: 2023, Felder FST 160 Sanding Table Technical Data Dimensions [mm]: 1660 x 1020 Working height [mm]: 726–1026 Extraction port diameter [mm]: 140 Year of manufacture: 2023 Price: 1100.- Hfodjy Agp Djpfx Ag Isg

Condition: like new (used), Pre-milling unit Glue station for granulate 2 pressure rollers End trimming unit with two saw blades Radius milling unit Pull-out support from the table Year of manufacture: 2019 Hodpfx Agsyzqhho Iofg Machine length: 2.7 m 400V 7 kW CE marking

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 45 mm, edge thickness (max.): 3 mm, feed rate X-axis: 7 m/min, The used FELDER G 460 is a compact and powerful edge banding machine designed for professional applications in crafts and small-scale industry. It enables precise edging and post-processing of edge materials, impressing with reliable technology, user-friendly operation, and high-quality workmanship results. Hsdpfx Aeyyk Sqjg Isfg Machine features: - Glue unit for hot-melt adhesive - End trimming unit (front/rear) - Flush milling unit - Fine milling/radius unit - Combined radius and surface scraper unit - Sturdy machine construction Further technical data: - Edge thickness: approx. 0.4 – 3 mm - Workpiece height: approx. 10 – 45 mm

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 200.04.007.13, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, TECHNICAL DETAILS Workpiece height min.: 8 mm Workpiece height max.: 60 mm MACHINE DETAILS Power: 11 kW Line voltage: 400 V Hodpjyux Egefx Ag Iefg Current: 28 A Phases: 3 Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,800 x 900 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Multifunction milling unit Pre-milling unit Profile milling unit Gluing unit

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20 h, working width: 650 mm, Belt sander manufactured in 2013. This FELDER FW 650 features a working width of 650 mm and a powerful 7.5 kW motor. It includes a variable feed speed ranging from 3.7 to 16 m/min and an automatic belt centering system. The machine comes with interchangeable sanding pads and a rubber contact roller. If you are looking to get high-quality sanding capabilities, consider the FELDER FW 650 machine we have for sale. Contact us for further details. • Sanding belt dimension: 670 × 1900 mm • Motor power: 7.5 kW (upgraded from 5.5 kW) • Voltage: 3 × 400 V • Duty type: S1 • Variable feed speed: 3.7–16 m/min • 1 combination aggregate • Interchangeable sanding pad • Rubber contact roller: 85 Shore • Electropneumatic sanding shoe • 2nd feed speed • Automatic belt centering • Automatic star-delta start (SD start) • Extraction connection: 120 mm • Control: Conventional (non-CNC) • Minimum transport height: 2370 mm • Minimum transport width: 2200 mm Additional equipment • Double-sided roller table extension Hfodpfx Aeyli H Aog Ijg • Abrasive belts included: • 670 × 1900 mm K80 (12 pcs) • 670 × 1900 mm K120 (12 pcs)

Condition: used, Felder G680 edge bander, pre-milling cutters, glue application by roller, pneumatic pre-cut guillotine, pressure rollers, finish-trimming saws, top-bottom milling unit R1 – R2, corner rounding unit, profile scraper, flat scraper, polisher. Edge thickness 0.4–3 mm, max panel height 50 mm, total power requirement 7.22 kW, machine length 405 cm. The corner rounding unit requires inspection as it is not functioning properly. Hfodpfx Ageyufawj Isg

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Extraction connection: 2 x 120 mm Feed speed: infinitely adjustable 2.5 - 10 m/min Standard equipment - Maintenance interval control Hfedpow Axi Aofx Ag Iog - Plain text error messages - Constant infeed height – fixed table, 900 mm - Electric height adjustment incl. fine adjustment from the control panel - Feed speed steplessly adjustable from 2.5 to 10 m/min via inverter at the control panel - Endless belt conveyor - Automatic feed mat centering - 1st brush unit with selectable steel brush, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - Dimensions: 1455 x 1070 x 1250 mm - Required air pressure: 6 bar Optional equipment 022 7.5 HP (5.5 kW) motor power, 1st unit 024 7.5 HP (5.5 kW) motor power, 2nd unit 027 Oscillation control for 1st and 2nd brush units 028 Opening height 250 mm instead of 200 mm

Condition: like new (used), Year of construction: 2024, For sale: Felder RL-160 clean air extraction unit with a maximum air volume flow of 3,200 m³/h. The extraction unit is currently in use as a demonstration model in our showroom and is therefore in as-new condition. Hodpfx Aoyh Ai Heg Isfg Technical data: - Max. air volume flow: 3,200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Manual filter cleaning - H3 dust-tested - Year of manufacture: 2024 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: excellent (used), Thickness planer Felder D963 Hjdpfxjxdmu Te Ag Isfg Max. planing width: 630 mm, Max. planing height: 300 mm, Spiral cutterhead, two rows, Electric height adjustment with readout, Feed with adjustable speed, 7.3 kW motor, Machine in very good condition.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a Felder RL-160 clean air extraction unit with a maximum air flow rate of 3,200 m³/h. The extraction unit is in excellent condition and has been inspected and serviced by our specialists. (Fully functional) Technical data: - Max. air flow rate: 3,200 m³/h - Filter surface: 10 m² - Extraction connection Ø: 160 mm - Manual filter cleaning - H3 dust tested - Year of manufacture: 2020 Hodpjwp Rgmofx Ag Iefg The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 130 h, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Hjdsyfvhajpfx Ag Ijfg Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Technical data: - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter - H3 dust tested - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Hfsdpfx Agsxnxm Nj Ieg Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Reference: R-A0117