Used Kf 20 L Super for sale (78,324)

Condition: ready for operation (used), Year of construction: 2018, operating hours: 550 h, functionality: fully functional, power: 16.92 kW (23.00 HP), fuel type: gasoline, We offer you: Chipper – Garden Chipper Eliet Super Prof Max on wheeled chassis Year of manufacture: 2018 520 operating hours Equipped with a powerful 23 HP Vanguard EFI engine Hydraulic wheel drive Hydraulic feed roller with forward & reverse Up to 13 cm branch diameter Folding discharge chute, swivels 280 degrees Electromagnetic engagement of knives 24 knives distributed over 6 discs Feed opening: 500 x 700 mm Fpodpfx Aoy D I I Rsh Eep Approx. 6.5 m³ of chips per hour Noise level: 116 dB(A) Weight: 441 kg The machine is also available for rent.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: Nr.2012/15, functionality: fully functional, power: 14 kW (19.03 HP), input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, total width: 2,000 mm, total length: 9,085 mm, total height: 2,713 mm, overall weight: 1,400 kg, 1. Technical Specifications Parameter Specification / Value - Manufacturer / Brand Schraml Glastechnik GmbH (LiSEC / LiTROS Group) - Model / Type topCLEAR TC 20 Super-4 - Serial Number 2012/15 Fodsz A D Rtopfx Ah Ejpp - Year of Manufacture 2015 - Direction of Operation From right to left (R → L) - Working / Operating Height 580 mm - Maximum Washing Height 2,000 mm - Glass Thickness 3 – 20 mm - Minimum Glass Dimensions 300 mm x 50 mm - Number of Washing Brushes 4 pieces (2 pairs for double-sided intensive cleaning) - Transport Speed Adjustable, 1 – 5 m/min - Total Weight 1,400 kg - Dimensions: L: 9085 mm H: 2700 mm W: 2000 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: E 3907, turning length: 200 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,300 kg, type of input current: three-phase, controller model: Mitsubishi Meldas, counter spindle speed (max.): 8,000 rpm, Long-turning lathe with FMB bar feeder! TECHNICAL DETAILS Turning diameter over bed: 20 mm Spindle bore: 24 mm Turning length: 200 mm Spindle speed: 20–10,000 rpm C-axis resolution: 0.001° Counter spindle / pick-off station Pick-off diameter: 20 mm Turning length: 80/600 mm Spindle speed: 200–8,000 rpm C-axis resolution: 0.001° Rapid traverse rates X/Y/Z: 32 m/min MACHINE DETAILS Control system: Mitsubishi Meldas Collet size: F25 (145E) Guide bushing: Neukomm T223 (22.001) Swivel angle of the tool block: 90° Driven tool positions: 3 Number of axes: 5 + 2 C-axes Total power requirement: 2.2/3.7 kW Dimensions & Weight Footprint: approx. 2.4 × 1.1 × 1.8 m plus loading magazine Machine weight: approx. 2.3 t Fodpfx Ahs Ah Du Ho Eepp EQUIPMENT CNC control system FMB 3-26 loading magazine Swiveling tool block with driven tools for radial and tangential machining Guide bushing by Neukomm Documentation On-board tools

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, turning length: 508 mm, turning diameter: 330 mm, spindle speed (max.): 3,400 rpm, center width: 610 mm, TECHNICAL DETAILS Swing diameter: 330 mm Turning length: 508 mm Swing diameter over bed: 585 mm Swing diameter over cross slide: 241 mm Spindle speed: 3,400 rpm Bar diameter: 63 mm Distance between centers: 610 mm Travel in X-axis: 214.6 mm Travel in Z-axis: 508 mm Tool holder: VDI 40 MACHINE DETAILS Total power requirement: 15 kW Dimensions & Weight Dimensions: 2,800 × 1,800 × 1,800 mm Machine weight: approx. 4,100 kg EQUIPMENT Bar feeder Servo Bar 300, 1.5 m 3-jaw chuck Collet chuck Tailstock Fodpfx Ahs Ah H Itj Eepp Various tool holders

Condition: refurbished (used), Year of construction: 2006, power: 5 kW (6.80 HP), Container press for SALE (like new)! Manufacturer: Ludden and Mennekes Type: LM20L Year of manufacture: 2006 Capacity: 20 m³ Engine power: 5.5 kW Press plate: refurbished Metal curtains: refurbished Hydraulic cylinders: refurbished Fodpfxj Afx Sks Ah Eepp New screws, new fingers Inspection and repair work completed In very good condition Ready for operation We have 3 units available.

Condition: excellent (used), functionality: fully functional, Westfalia Separator AG CIP System Westfalia Separator AG CIP System | Tank, Pump, Heat Exchanger System type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group A complete CIP (Cleaning In Place) installation from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of process lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, recirculation pumps, a GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the system: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs) Serial numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media. 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High efficiency heat transfer for CIP solution preparation. 8. Control cabinet Fsdpfx Ahsxtvb Ue Espp Dimensions: 670 × 220 × 800 mm Responsible for controlling and monitoring CIP system operation. 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separator AG CIP system is a comprehensive solution for cleaning process installations, providing: - high process hygiene, - monitoring of cleaning parameters (temperature, flow, time), - integration capability with dairy, food, or beverage production lines. The use of components from GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Condition: used, mileage: 68,000 km, power: 375 kW (509.86 HP), first registration: 03/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,450 mm, loading space volume: 14 m³, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Reference Number: #210 MAN TGS 28.510 6x2 BL Wiedemann Super 2000 8.0/5.0/1.0 MAN TGS 33.510 6x4 with powerful Wiedemann Super 2000 water recycling unit (8.0/5.0/1.0). This vehicle is purpose-built for professional sewer cleaning and jetting operations, combining high suction power, effective water recycling, and robust high-pressure technology in a durable, user-oriented configuration. With a 14,000 L tank capacity, 3,000 m³/h vacuum power, large-diameter DN150 suction line, and a high-performance Uraca high-pressure system, this recycler is ideally equipped for demanding municipal and industrial applications. Extensive operating, comfort, and safety features enable efficient workflows even during long periods of use. Body: * Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling unit * 14,000-liter tank capacity * 1,000-liter fresh water * 5,000-liter jetting water * 8,000-liter sludge compartment * Discharge by tilting tank up to 45° Vacuum System: * Wiedemann & Reichhardt KW 3000 * 3,000 m³/h * Galvanised DN150 pipework * Approx. 20 m suction hose DN150 High Pressure System: * Uraca P3-45 65 413 liters/min at 175 bar * Approx. 160 m HP hose DN32 * Hydraulic jetting hose reel with approx. 80 m DN13 Additional Fresh Water Unit: * Speck NP 25/50-150 with 50 l/min at 150 bar * Spring rewind hose reel with 15m pressure hose DN10 Special Features: * Sludge tank made of material 1.4301 (stainless steel) * Suction and HP booms * 5-liter heated hand wash * Stainless steel toolbox * Operator control cabinet with display * Engine start controllable from cabinet * NMV start controllable from cabinet * Radio remote control with display * Equipment cabinet with two doors – both sides accessible * Hose storage rack * Extended soundproofing for pump compartment * LED work lights * Central lubrication system Technical Data: * Unladen weight: 18,385 kg * GVW: 26,000 kg * Length: 10,100 mm * Height: 3,450 mm * Width: 2,550 mm Chassis: * MAN * TGS 28.510 * 6x2 * 375 kW / 510 HP * EURO 6 * Automatic transmission * Air conditioning * Self-propelled working machine — sewer cleaner Conclusion: An extremely powerful MAN TGS 28.510 6x2 equipped with Wiedemann Super 2000 water recycling body, advanced vacuum and high-pressure technology, and thoughtfully designed operator and comfort features. The ideal solution for professional sewer cleaning companies who place value on efficiency, performance reserves, and rugged technology. Fedpjydhh Nofx Ah Eepp For further details and/or pictures, please contact us directly. A wide range of additional vehicles for SALE or RENT can also be found at: Changes, prior sale and errors excepted. The purchaser is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively under our general terms and conditions and excludes any warranty.

Condition: used, mileage: 21,000 km, power: 346 kW (470.43 HP), first registration: 05/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal number: #129 MAN TGS 28.470 6x2-2 BL Wiedemann SUPER 2000 – available upon request Chassis * MAN * TGS 28.470 * 6x2-2 BL * 4 * 470 HP/346 kW * EURO 6 * Engine D2676LF52 * MAN Tronic transmission control MAN Comfort Shift ZF 16 S 252 OD * N-drive NMV 221 f=0.98 /drive flange 150 mm for NMV 8-hole * 3,900 + 1,350 mm wheelbase * Front suspension: parabolic 9.5t * Rear suspension: air for high center of gravity * 400-liter fuel tank + 60-liter AdBlue tank * 385/55 R 22.5 STEER-AXLE TL 160&K * 315/70 R 22.5 DRIVE-AXLE TL 154/150&K * 385/55 R 22.5 STEER-AXLE TL 160&K * Chassis color RAL 9011 graphite black * Cab color RAL 2004 deep orange * Halogen beacons * “M” cab 2,240 mm wide 1,880 mm long * Air conditioning * MAN Media Navigation Package / video function via USB/SD / 7” color display / MAN Camera View / AUX-in / USB / Comfort hands-free for 2 mobile phones Body * Wiedemann enviro tec * Super 2000 8.0/6.0 water recycling * 14,000-liter tank * 6,000 liters fresh water * 8,000 liters waste water * Discharge by tilting the tank 45° Vacuum System * Wiedemann & Reichhardt KW 3000 * 3,000cbm/h 80kW * Piping galvanized, DN 150 * Approx. 25m suction hose DN 125 * Suction pipe DN 125 with channel spatula * Silencer High-Pressure System * Uraca P3-45 65, 406 liters at 175 bar * Hydraulic high-pressure hose reel with approx. 180m HP hose DN 32 with automatic rewind * Hydraulic high-pressure hose reel with approx. 80m HP hose DN 13 with automatic rewind Additional fresh water system * Speck NP 25/50-150, 50 l/min at 150 bar * Spring-loaded reel with 15m pressure hose DN10 Special features * Sludge tank made of material 1.4301 * Suction and HP boom * 20-liter hand washing unit (heated) * Stainless steel toolbox * Control cabinet with display * Engine – start can be controlled from control cabinet * NMV – start can be controlled from control cabinet * Radio remote control with display * Equipment cabinet with two flaps – access on both sides * Hose tray * High sound insulation of pump compartment * LED worklights * Central lubrication system Technical data * Unladen weight 18,500 KG * Permissible GVW 28,000 KG * Length 10,400 mm Fsdpfsvh H Hhox Ah Ejpp * Height 3,650 mm * Width 2,550 mm For further detailed information and/or photos, please contact us directly. You will find a wide range of further vehicles available for PURCHASE or RENT on our website: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale exclusively according to our terms and conditions and under exclusion of any warranty.

Condition: used, mileage: 10,655 km, power: 375 kW (509.86 HP), first registration: 03/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, loading space volume: 14 m³, Year of construction: 2023, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Fpsdpfx Aovh H Ifeh Eop Internal number: #309 MAN TGS 26.470 6x4 BL Wiedemann Super 2000 8.0/5.0/1.0, Chassis: MAN * TGS 26.470 * 6x4 BL * 375 kW / 510 HP * EURO 6 * Automatic transmission * Air conditioning Body: Wiedemann enviro tec * Super 2000 8.0/5.0/1.0 water recycling unit * 14,000 litre tank capacity * 8,000 litre sludge volume * 5,000 litre wash water * 1,000 litre fresh water * Discharge by tilting the tank up to 45° Vacuum system: Wiedemann & Reichhardt KW 4000 * 4,000 cbm/h 106 kW * Galvanized pipeline in DN 150 * Approx. 25 m suction hose DN 125 * Suction pipe DN 125 with duct cleaner * Silencer High pressure system: Uraca P3-45 65 413 litres/min at 175 bar * Approx. 180 m HP hose DN 32 * Hydraulic hose reel with approx. 80 m DN 13 Additional fresh water system: Speck NP 25/50-150 with 50 l/min at 150 bar * Spring-loaded hose reel with 15 m pressure hose DN 10 Special features: Sludge and water tanks made of stainless steel 1.4301 * Suction and HP booms * 20-litre warm water hand washing unit * Stainless steel toolbox * Control cabinet with display * Engine start can be operated from the control cabinet * NMV start can be operated from the control cabinet * Radio remote control with display * Equipment cabinet with two doors – on both sides * Hose storage * Pump chamber noise insulation extended upwards * LED work lights * Central lubrication system Technical data: * Unladen weight approx. 19,120 kg * GVW approx. 26,000 kg * Length approx. 10,100 mm * Height approx. 3,650 mm * Width approx. 2,550 mm For further details and/or pictures, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is responsible for verifying the condition and equipment of the goods independently. Sale takes place exclusively under our Terms and Conditions and excludes all warranties.

Condition: used, Year of construction: 2014, power: 5 kW (6.80 HP), We are selling a container press! 1. Manufacturer – Ludden und Mennekes Type – LM20L Year of manufacture – 2014 Fodpjz Hbzqefx Ah Espp Capacity – 20 m³ Motor power – 5.5 kW 2. PRESKONTAINER LM20L, 2011, 5.5 kW Price on request!

Condition: used, Year of construction: 1980, Used machine Condition: various small defects without chains Fodow I U Nhjpfx Ah Eopp Equipment and technical data: Stroke left/right: 150 mm, Top/bottom stroke: 150 mm Motor: 1.5 kW Can be used as a spare parts carrier Availability: short term Location: Flörsheim

Condition: used, Year of construction: 2002, Double-sided softforming edge banding machine HOMAG type Power KF 20/34/QE/30, machine no. 0-202-25-8815, year 2002 Fsdpsyyxc Rsfx Ah Ejpp

Condition: used, functionality: fully functional, machine/vehicle number: 0181, Year of construction: 2021, operating hours: 5,280 h, load capacity: 2,000 kg, lifting height: 7,850 mm, fuel type: electric, mast type: simplex, construction height: 2,600 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift truck Chassis number: 0181 Load center: 600 Fpodpfjy Uptisx Ah Ejp ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Quattro Condition: As good as new Technical condition: Very good Front tires Type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Battery Volt: 48V Battery manufacturer: STILL Battery type: PzS Battery year of construction: 2021 Battery condition: 80 - 100% Sideshift, 3rd valve,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,674 h, load capacity: 2,000 kg, lifting height: 6,225 mm, free lift: 2,119 mm, fuel type: electric, mast type: triplex, construction height: 2,721 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Dual pedal Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 200 50 10 Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 140/55-9 Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 750Ah Fpedpfx Ahoz S Ruxe Eop Battery manufacturer: AIM Battery type: PzS Battery year of manufacture: 2018 Battery condition: 60 - 80% Description: Handover with new FEM.4004 inspection including inspection certificate. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other forklifts in stock. Visit our website for leasing and financing options, as well as for favorable delivery terms. We can also offer a trade-in for Linde equipment, even if you do not purchase a device from us. The indicated operating hours were recorded as of the date of the listing. Subject to prior sale, changes, and errors. Side shifter, fork positioner, integrated fork positioner with side thrust 3rd valve, 4th valve, rear work light, front work light, heater, load guard, full cabin, full free lift, safety light, seat heater, LED.

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Fpsdpfjwtpfpox Ah Eep Machine weight: approx. 19.5 t ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

Condition: used, used, good condition, hardly runmanufactured by Haffnertype KF 20stand machinechain set 40 x 150workpiece restlubricant unit1 x mechanical workpiece clampingrequired space ca. l x w x h mm600 x 800 x 2000total connected power 1,7 kWlocated in  97447 Gerolzhofensale in current condition as seen- free on truck - Fpjdovwgayjpfx Ah Esp

Condition: used, machine/vehicle number: K11739, Rotor diameter: 150 mm Rotor width: 200 mm Rotor blades: 3 rows Fpedsz N Iyajpfx Ah Esp Stator blades: 2 rows Inlet cross-section: approx. 300 x 200 mm Drive motor: 2.2 kW

Condition: good (used), machine/vehicle number: 17376, Year of construction: 2022, operating hours: 55 h, load capacity: 2,000 kg, lifting height: 4,476 mm, free lift: 1,560 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,065 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,646 kg, enginetype: Electric, manufacturer: Linde Fpsdpjz N Aiisfx Ah Ejp Serial Number: P21173L06436 Battery Details: 24V 3PzS 375Ah BJ: 2022

Year of construction: 2025, condition: new, The manually operated Genie® Superlift® Advantage material lifts offer various load handling options. The Genie® Superlift Advantage™ SLA™-20 is available with a versatile, adjustable pallet base that can handle wide loads as well as narrow doorways and can be loaded onto or into a vehicle in no time at all. Fpodpfx Ahsyt E Eqj Eep

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 15,079 h, load capacity: 2,000 kg, lifting height: 4,550 mm, free lift: 1,470 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, gearing type: other, battery capacity: 625 Ah, battery voltage: 48 V, fork length: 1,200 mm, front tire type: superelastic tires (black), front tire size: 200/50 - 10, rear tire type: superelastic tires (black), rear tire size: 15 x 4,5 - 8, overall weight: 3,644 kg, total height: 2,120 mm, total length: 2,050 mm, total width: 1,180 mm, fuel: electricity, Equipment: sideshift, LINDE E 20 L-02 – Electric 3-wheel forklift TECHNICAL DATA Lifting capacity: 2.000 kg Lifting height: 4.550 mm Closed height: 2.120 mm Free lift: 1.470 mm Mast: Triplex (3F455) Fork length: 1.200 mm Fork carriage: 2A Drive: Elektro Battery: 48 V 625 Ah v. 2017 Charger: ohne/without Transmission: Impuls Tyres: Superelastik 200/50 - 10 (0%) / 15 x 4,5 - 8 (0%) Service weight: 3.644 kg Length: 2.050 mm Width: 1.180 mm Year of manufacture: 2017 Operating hours: 15.079 h Condition: working condition EQUIPMENT 3rd valve, Front work lights, Pulse control ATTACHMENTS Sideshift Fsdpfoz Apuysx Ah Espp Internal no.: 1308611 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,060 h, load capacity: 2,000 kg, lifting height: 4,150 mm, free lift: 1,430 mm, fuel type: electric, mast type: triplex, construction height: 1,940 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Double pedal Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Front tire size: 200 50 10 Fpedpfxj Aatz Ns Ah Ejp Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 140/55-9 Rear tire condition: New Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: AIM Battery type: PzS Battery year of manufacture: 2017 Battery condition: 80 - 100% Description: Delivery with new FEM.4004 inspection including inspection certificate. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other material handling vehicles in stock. Visit our website for leasing and financing options. We will also be happy to provide you with a quote for delivery at favorable conditions. Trade-in of Linde equipment is also possible – even if you do not purchase equipment from us. The stated operating hours were recorded as of the date of the listing. Subject to prior sale, changes and errors. Side shifter, fork positioner, integrated side shifter, Kaup fork positioner pre-installed 3rd valve, 4th valve, rear work light, front work light, half cabin, load guard, full free lift, safety light, LED

Condition: excellent (used), CATALOGUE NUMBER 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3, manual adjustment up/down, left/right - spindle 2, manual adjustment left/right - spindle 2, electric adjustment up/down - spindles 2 and 3 are equipped with brakes from above: - 3 feed rollers, pulling, metal toothed - 1 double output roller, pulling, rubber from below: - feed pressure roller - ribbed table - pulling roller, metal, smooth - electric adjustment of planing thickness - stepless adjustment of feed speed 6-24m/min - feed motor 3kW - feed on Cardan shafts - length of the feed table 1970mm - automatic lubrication system for the table - diameter of the dust extraction outlet 1x150mm, 2x140mm - dimensions L/W/H 3070x2000x1800mm - weight 2000kg ADVANTAGES – German production – with 3 heads – for processing slats – ribbed table – heads included – unpainted – very good condition Fpedozxq I Hspfx Ah Eop – used planer Net price: 115900 PLN Net price: 26960 EUR Net price calculated at an exchange rate of 4.30 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Condition: good (used), Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting attachment -Manufacturer: Pittler, self-opening thread cutting head -Type: Model A 3 L 1018/20 -Cutting jaws: not included -Bore: Ø 31/24 mm -Hole: Ø 40 mm -Dimensions: 130/125/H170 mm Fedexc T Rlspfx Ah Ejpp -Weight: 3.6 kg

Condition: like new (used), Year of construction: 2018, operating hours: 6,472 h, load capacity: 2,000 kg, lifting height: 4,650 mm, fuel type: electric, mast type: triplex, construction height: 2,130 mm, Manufacturer + model: LINDE E 20 L - 386 / 02 evo * EX * Proplan 2GD / Zone 1-21-22 * Mast: 3F4650 ID: 26087.5731 Category: Used Mast: 3F4650 Lowered height: 2130 mm Lifting height: 4650 mm Capacity: 2000 kg Year: 2018 Hours: 6472 hours Capacity: Complete NEW * 48v / 625ah * Manufactured 02/2026 Options: * EX * Proplan !!!!! System / Certificate = INERIS 08 ATEX 3022 X Type = Cat 2G (permitted in ZONE 1 & 2) Gas group = IIB Temperature class = T4 Type = Cat 2D (permitted in ZONE 21 & 22 - Dust) Temperature class = T 135 *C - IP 6X Equipped with: - CONTAINER specifications!! - Joystick control for forward and reverse - Triplex FFL mast - Spotlights front and rear - Flashing light - Blue spot Fpsdpfxjzv R Hwj Ah Eop - LOW cabin < 2000 MM !!!

Condition: good (used), Manufacturer Thurm type B 20 R 100 L 4-2 HL H STR Engine number 12618430011409 power 3,7 / 4,4 kW speed 1.425 / 2.890 rpm Shaft length Shaft diameter Fpjdpfxomw Uncs Ah Ejp Weight 48 kg Dimensions Motor of milling machine Deckel FP3A CNC machine number 2206 - 0443