Used Felder Bf6-26 for sale (157)

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Lrodpoxlt Shsfx Ahksr Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Lredpfoyzdnbjx Ahksr Workpiece hold-down Chuck up to 16 mm

Condition: used, Year of construction: 2020, Sled length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 120 mm Scoring saw: yes Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Crosscut fence adjustment: manual Lodpjzq Dcuofx Ahkerr Saw blade angle indicator: scale Cutting height indicator: - Rip fence indicator: scale Crosscut fence indicator: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, actuation type: electric, table length: 205 mm, Equipment: CE marking, rotational speed infinitely variable, We are selling a professional and immediately ready-to-use workshop set from the Austrian premium manufacturer Felder. The set consists of the precise panel saw K 700 (year of manufacture 2010) and the matching mobile dust extraction unit AF 14. Both machines are in a well-maintained, fully functional condition and have operated flawlessly in a professional workshop environment until recently. Perfect for carpentry shops, interior design, or ambitious woodworkers who are looking for a complete solution. 1. Felder K 700 panel saw: Motor power: 5.5 kW (powerful S6-40% version) Voltage / Frequency: 400 V / 50 Hz (three-phase) Features: Smooth-running aluminum sliding table, large extension table with retractable guide rail and folding stop, solid parallel fence on round bar guide with fine adjustment, workpiece clamping device (eccentric clamp). 2. Felder AF 14 mobile dust extraction unit (included): Model: Felder AF 14 (movable on rollers) Power: Powerful motor with robust steel fan wheel Lsdpfxjzrl A Ee Ahkjrr Airflow: Max. 2,350 m³/h for excellent chip extraction Convenience: Practical quick-change system for chip bags Accessories: Includes flexible extraction hose (as shown) for direct connection to the panel saw. The system is completely coordinated – connect it and start working dust-free immediately! The machines can be viewed on-site and tested while powered up after prior arrangement.

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, barely used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with a sliding table, jointer and thickness planer, as well as a mortising machine. 5 motors, 360 V. The machine is available for sale immediately and is located in a ground-level basement in 23858 Reinfeld. Lrodpfx Ahozn I Aaoker Transportation is the responsibility of the buyer.

Condition: used, Year of construction: 2021, functionality: fully functional, Format panel saw / table saw Format4 Kappa 550 by Felder, purchased on May 26, 2021, for precise longitudinal, transverse, and miter cuts in wood and panel materials. Professional saw for carpentry, interior design, and workshop use. Key technical data: Lredpfozuywisx Ahksr - Machine type: Format panel saw / table saw - Saw blade diameter: 250–550 mm - Max. cutting height: approx. 202 mm at 90° / approx. 140 mm at 45° - Swivel range of saw unit: 0°–46° - Cutting width: approx. 1000 / 1250 / 1600 mm, depending on the model - Cutting length: approx. 2200–3700 mm, depending on the model - Speeds: 3000 / 4000 / 5000 rpm, optionally continuously variable 2000–6000 rpm - Motor power: approx. 7.5 kW, optionally higher depending on the configuration - Precise format table for repeatable, accurate cuts - Suitable for solid wood, panel materials, and dimensionally accurate furniture / interior design work - Core machine for professional woodworking shops, carpentry shops, training workshops, and makerspaces No warranty

Condition: as good as new (ex-display), Code: 0470 Brand: HAMMER - FELDER - AUSTRIA Model: A 2 - 26 - CE Standard 2-Works combined machine (surface planer /thickness planer ) – CE Standard Single-phase motor Planer table width 260 mm Thickness height 184 mm Tilting planer guide Lrsdpszqrvcsfx Ahkor Max chip removal 3 mm Wheels on the base

Condition: used, Year of construction: 2021, Format4 Kappa V60 vertical panel saw by Felder, purchased on May 26, 2021, for precise cutting of panel material in the wood workshop. Suitable for large-format wood, wood-based materials, and coated panels with minimal space requirements. Key technical data: - Cutting depth: Maximum 60 mm - Cutting height: 2200 mm vertically, or approx. 2080 mm horizontally Lredpozulpqsfx Ahker - Cutting length: standard 3200 mm or 4200 mm, optionally extendable to 5300 mm or 6080 mm - Motor power: 4.0 kW / 5.5 hp - Saw blade: Ø 250 mm at 5300 rpm, optionally with stepless speed control 2000–6000 rpm - Dust extraction: 2x 100 mm connections - Weight: approx. 910 kg, depending on the model - Vertical design for space-saving cutting of large panels - Precise horizontal and vertical cuts for panel materials - Particularly interesting for carpentry shops, makerspaces, training workshops, and companies with regular panel cutting requirements No warranty.

Condition: good (used), Year of construction: 2019, functionality: fully functional, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, Very well-maintained and regularly serviced. TECHNICAL DETAILS Workpiece height: max. 60 mm Workpiece width: max. 60 mm Workpiece length: max. 150 mm Edge thickness: max. 3 mm Processable edge materials: ABS, PVC, veneer strip, solid edge strips Feed and Operation Feed rate X-axis: 18 m/min Height adjustment: mechanical Type of operation: electric MACHINE DETAILS Data recorded as of March 20, 2026 Main switch – total operating time: 9,720 h 57 min 06 s Chain drive – total operating time: 1,216 h 19 min 51 s Total number of workpieces: 91,356 pieces Total workpiece length: 63,904.7 m Overall height: 1,468 mm Overall length: 4,412 mm Overall width: 1,511 mm EQUIPMENT Ljdpfx Aszv Rcrshkerr - Smartouch touchscreen control - Program settings with memory function - Release agent - Pre-milling unit - Radius cutter, top and bottom - Corner rounding unit - Radius trimming unit - Flat trimming unit - Adhesive remover - Polishing unit - Automatic feed

Condition: used, Year of construction: 2021, functionality: fully functional, Felder FB 510 vertical band saw, purchased on May 26, 2021, for cutting curves, making longitudinal cuts, and performing shaped cuts in wood and wood-based materials. A robust workshop machine for cutting, model making, furniture construction, and training purposes. Key technical data: - Machine type: Vertical band saw - Model: Felder FB 510 - Cutting height: approx. 410 mm - Cutting width / throat depth: approx. 480 mm - Roller diameter: approx. 500 mm - Table size: approx. 500 x 640 mm - Table tilt: approx. -10° to +45° - Saw band length: approx. 4318 mm - Saw band width: approx. 6–25 mm - Cutting speed: approx. 1100 m/min or 1450 m/min, depending on the model - Motor power: approx. 3.0 kW / 4.0 hp - Dust extraction: 2 dust extraction connections, approx. 120 mm each, depending on the model - Weight: approx. 250 kg - Versatile machine for curved cuts, contour cuts, ripping, and general cutting - Suitable for solid wood and wood-based materials - Ideal for woodworking shops, model making, training facilities, and makerspaces Ljdpfx Aozun Szehkerr No guarantee.

Condition: used, Year of construction: 2021, Dust extraction system Manufacturer: Felder Type: RL 300 Year of manufacture: 2021 - Like new, never used - Technical data - Airflow rate: max. 6000 m3/h - Rated airflow rate at 20 m/s: 5090 m3/h - Negative pressure at the total connection at 20 m/s: 2680 Pa - Dust extraction connection (can be mounted on the left or right): 300 mm - Filter area: 50 m2 - Sound pressure: 75 dB Lrjdpfx Ajzv Tmmjhker - Chip collection container (liters): 2 x 250 l Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, functionality: fully functional, Extraction ducting, purchased on March 24, 2021, for the wood workshop extraction system. Piping/ducting system for connecting multiple woodworking machines to a central or decentralized extraction system. Total length of ducting (approximate dimensions): 300 mm pipe diameter → approx. 20 m 250 mm pipe diameter → 1.5 m + approx. 7 m hose 200 mm pipe diameter → approx. 2 m 160 mm pipe diameter → approx. 18 m 140 mm pipe diameter → approx. 1.5 m 120 mm pipe diameter → approx. 5 m 100 mm pipe diameter → approx. 6 m Extraction flaps: 300 mm → 1x 250 mm → 1x 160 mm → 4x 140 mm → 1x 120 mm → 2x 100 mm → 2x Key technical data: - Machine type: Extraction ducting / piping system for chip and dust extraction - Application area: Connection of woodworking machines, extraction points, and extraction system - Function: Collection and removal of wood chips and dust from the workshop - System components: Pipes, elbows, branches, dampers, brackets, and connecting pieces - Material / design: Workshop ducting for stationary extraction technology - Use: Connection of multiple machines such as saws, planers, milling machines, and sanding machines Ledpfszuyz Iox Ahkorr - Advantage: supports a clean, safe, and efficient workshop operation - Particularly interesting in combination with an extraction system or for workshops under construction/renovation - Relevant accessory package for multiple stationary machines - Useful addition for woodworking shops, carpentry shops, training workshops, and makerspaces No warranty

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 31.07.109.22, functionality: fully functional, operating hours: 1,200 h, power: 3 kW (4.08 HP), input voltage: 230 V, input current: 20 A, input frequency: 50 Hz, type of input current: DC, volume flow: 1,450 m³/h, intake vacuum (max.): 2,400 mbar, suction capacity: 3,200 m³/h, intake manifold diameter: 160 mm, filter area: 20 m², noise level: 70 dB, actuation type: pneumatic, total height: 2,005 mm, total length: 1,775 mm, total width: 898 mm, overall weight: 370 kg, year of last overhaul: 2022, Equipment: CE marking, documentation/manual, PRICING & CURRENCY NOTICE FOR UK BUYERS: Headline price is €5,000 due to platform limits. Actual price is fixed at £4,250 GBP. UK Buyers: Fixed at £4,250 GBP via BACS bank transfer. No conversions. Overseas Buyers: Must clear into our UK bank as exactly £4,250 GBP net of all fees. 📌 COLLECTION LOCATION NOTICE: The machine is NOT at our registered account/billing address. Location: Private workshop just outside West Calder (rural area), West Lothian, Scotland. Access: Ample space and suitable access for vans, flatbeds, and collection couriers. Full Address: Provided directly to the buyer upon formal agreement of sale. Overview & Provenance: For sale due to a complete workshop closure. This premium Felder RL 160 clean-air dust extractor was purchased brand new directly from an official Felder dealership. One private owner from new. Meticulously maintained and looked after in a clean workshop environment. Clear Title & Ownership: Originally financed through Novuna over a 4-year term. All payments are fully complete as of August 2026. The machine is sold with 100% clear title, free from any financial encumbrances or liens. Official settlement confirmation can be shown upon request. Rare Single-Phase Configuration: Factory-built single-phase (230V) machine. Maximum operational current draw of 19.7A (requires a 25A backup fuse circuit, typically running on a 16-amp industrial socket). Ultimate plug-and-play setup for high-end home workshops or sites without 3-phase power. Premium Factory Upgrades & Accessories: • Pneumatic Filter Cleaning: Factory-fitted Jet-Pulse automatic compressed-air cleaning system. Blasts dust from inside filters to ensure maximum, constant suction and extend filter life. • Integrated Mobile Chassis: Factory heavy-duty caster wheel kit for effortless movement. • Dry-Air Protection Kit: Inline moisture filter and integrated pressure gauge. Ensures air supply is clean, dry, and regulated, fully protecting filters from moisture damage. • Pneumatic Pipework: Extra lengths of plastic compressed-air piping included alongside currently fitted pipework for immediate setup. Technical Specifications: • Certification: H3 Certified (Residual dust < 0.1 mg/m³ for clean indoor workspace air). • Max Airflow: 3,200 m³/h • Intake Vacuum / Negative Pressure: 2,400 Pa • Extraction Port: 160 mm • Filters: Original Felder filters, used but in perfectly fine, clean operational condition. • Noise Level: Exceptionally quiet 70 dB operational sound pressure level. Transaction & Returns Terms: • Price: £4,250 (No VAT to add / Private Sale). Ledpfx Ahszvh Dyokorr • Payment: Strictly via secure Direct Bank Wire Transfer (BACS / IBAN / SWIFT). No PayPal, cheques, or cash-on-delivery couriers. • Shipping: Buyer must independently arrange, insure, and pay for all transport logistics. Machine released only once funds fully clear. • Returns: Private sale. Sold as described with no returns. Viewing and testing under power at the workshop is highly welcomed and encouraged.

Condition: used, Year of construction: 2021, functionality: fully functional, Format4 Dual 51 planer and thicknesser from Felder, purchased on April 29, 2021, for precise planing and thicknessing of solid wood. Powerful combination machine for professional woodworking shops. Key technical data: Ledpozulhtofx Ahkjrr - Machine type: Planer and thicknesser - Model: Format4 Dual 51 - Planing width: approx. 510 mm - Thicknessing width: approx. 504 mm - Thicknessing height: approx. 3–254 mm - Planing table length: approx. 2250 mm - Max. chip removal: approx. 8 mm - Feed rate: Vario-Feed approx. 4–16 m/min - Cutterhead: approx. 120 mm diameter, Silent-Power spiral cutterhead also possible depending on the configuration - Motor power: approx. 5.5 kW, optionally higher depending on the configuration - Combined design saves space compared to two separate machines - Central base machine for solid wood processing, furniture making and interior design - Attractive for carpentry shops, workshops and training companies No guarantee

Condition: used, Year of construction: 2018, machine/vehicle number: 432.10.507.19, type of input current: three-phase, overall weight: 340 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 3 A, power: 1.5 kW (2.04 HP), We offer this used Felder FD 21 pro dowel drilling machine, manufactured in 2018. Ljdpezuwguofx Ahkjrr Type: FD 21 pro Serial number: 432.10.507.19 Code: 7502 Voltage: 400.0 V Number of phases: 3 Frequency: 50 Hz Current: 3.35 A Power: 1.5 kW Year of manufacture: 2018 Country of manufacture: Austria If you have any questions or require additional information, please send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,800 h, power: 19 kW (25.83 HP), input voltage: 400 V, input current: 40 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 250 mm, workpiece length (max.): 3,300 mm, workpiece width (max.): 1,280 mm, workpiece height (max.): 150 mm, number of axes: 4, number of slots in tool magazine: 41, controller manufacturer: Tpa Srl – Tecnologie e Prodotti per l'Automazione, actuation type: electric, Equipment: USB port, documentation/manual, PRICE INCLUDES TRANSPORT We offer this very good FORMAT4 PROFIT H200 13.33 machining center. The machine is equipped with 4th axis spindle and max-version drilling head. It only worked about 1800 hours and has some small marks from usage. In the bundle we will provide everything that came with the machine as well as additional suction cups. Milling tools and holders are not a part of the deal FOR NOW. Machine is working daily and is an excellent choice for any woodworking company. Lredoy Dcvvopfx Ahker Type designation: PROFIT H200 13.33 Serial number: 302.07.040.20 Code: 0491 Supply voltage: 400.0 V Phase: 3P+N Frequency: 50/60 Hz Current: 40.0 A Power: 19.0 kW Year of construction: 2020 year Control voltage: 24 VDC Minimum fuse: 47 A Maximum fuse: 64 A Minimum compressed air pressure: 8 bar Air consumption: 350 Nl/min If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale is a Format4 c-express 920 classic CNC drilling and dowel processing center from Felder. This machine is ideally suited for efficient processing of carcass and furniture components. It enables precise drilling, milling, and dowel processing and is particularly designed for carpentry shops, joineries, and furniture manufacturing. Thanks to its compact design and powerful CNC control, the processing center is ideal for economical single-piece and series production. The machine is in a well-maintained, used condition and can be inspected and tested under power by appointment. Technical data: Manufacturer: Format4 (Felder Group) Type: c-express 920 classic with additional front and rear support roller tables Operating hours: approx. 800 Year of manufacture: 2016 LxWxH: 2100x1605x1950mm Weight: 850kg Motor power drilling head: 1.5kW Drilling head speed: 3600 rpm Circular saw unit speed: 9000 rpm Horizontal spindles (max.): 2+2, 1+1 Vertical spindle (max.): 9 Distance between horizontal spindles: 32mm Distance between vertical spindles: 32mm Diameter horizontal spindles max.: 15mm Diameter vertical spindles max.: 8 x 15 mm, 1 x 35 mm Diameter circular saw blade max.: 100mm Max. drilling depth: Horizontal 30mm, Vertical 55mm Voltage: 400 V 3 phases Frequency: 50 Hz Connected load: 7.0 kW Operating mode: S6 40 % CNC-controlled processing center Automatic workpiece feed Operating PC with screen, keyboard, and mouse Foot switch Dust extraction connection Drilling and dowel processing Workpiece support table with rollers Safety enclosure Application areas: Furniture manufacturing Carcass production Dowel processing Drilling patterns Row drilling Hardware drilling Interior construction Carpentry Joinery The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! Ledjzrwmispfx Ahkorr The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2020, includes accessories Lrodpezn N Iqofx Ahkor Working width 950 mm 4-position tool changer, side-mounted Location: Nattheim

Condition: used, Year of construction: 2017, operating hours: 9,370 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X-axis working area: 3000 mm - Y-axis working area: 1550 mm - Z-axis clearance: 150 mm Main Spindle - 5-axis electric spindle - 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Speed range: 1,000 - 24,000 rpm - Ceramic bearings - Liquid-cooled spindle - Clockwise/counterclockwise rotation - Integrated tool changer interface - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System Linear Tool Changer - 12-position - Interface for tool holders - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm Disc Tool Changer - 18-position - Mounted on the traversing portal - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Ljdpfjzuw H Isx Ahkerr Circular Saw Blade Changer - Maximum saw blade diameter: 350 mm Drilling Unit DH18 6H 2S Drilling Head - 12 vertical spindles: 7 in the X-direction, 5 in the Y-direction - 6 horizontal spindles: 4 in the X-direction, 2 in the Y-direction - Drilling stroke: 70 mm - Maximum drill length: 70 mm - Tool holder diameter: 10 mm - Individual drive for each spindle Dadoing Saws - 2 dado saw blades: 1 in the X-axis, 1 in the Y-axis - Maximum saw blade diameter: 120 mm - Maximum saw blade thickness: 5 mm - Speed adjustable up to 6,000 rpm Vacuum and Clamping System Console Table - 6 consoles - Front and rear programmable stops - Wireless dual-circuit vacuum system - Height of vacuum suction cups: 100 mm - Pneumatic console locking - 4 adjustable side stops - Additional support arms Vacuum Pump Flow Rate: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz Additional Vacuum Equipment - Vacuum connection for template machining (left side) - Additional vacuum connection for template milling (right side) - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air control for all consoles WoodFlash Software Package Control Panel - Complete machine control - Loading and execution of programs - Tool and machining management - Sensor monitoring - Manual machine commands Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB port Handheld Control for Feedrate Control - Feedrate override - Emergency stop button - Manual feedrate adjustment during machining Safety Devices - CE safety system - Light curtain safety system - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Vacuum and compressed air sensors - Additional safety mat system Operating Hours: 9370 hours

Condition: used, Year of construction: 2021, Brief description for sale: Felder Format4 Profit H200 CNC wood router, purchased on May 14, 2021, including a vacuum clamping table. Professional CNC machine for the precise machining of larger wood and panel workpieces, suitable for demanding workshop and production applications. Key technical data - Machine type: CNC machining center / CNC wood router - Model: Format4 Profit H200 R 13.33 - Working area X: approx. 3300 mm Lrjdpfx Aozupcbshksr - Working area Y: approx. 1280 mm - Working area Z: approx. 250 mm - Main spindle: approx. 13.2 kW - Max. speed: up to approx. 24,000 rpm - Tool holder: HSK-F63 - Tool changer: depending on the configuration, up to approx. 16 positions or 10 + 18 positions - Vacuum system: including vacuum clamping table / vacuum clamping - A very attractive key asset for carpentry shops, interior design, prototyping, and small-series production - Suitable for milling, drilling, grooving, contouring, and panel processing - Vacuum clamping table as an important selling point for efficient clamping of panel materials No warranty

Condition: used, Year of construction: 2018, operating hours: 6,442 h, Technical Data Working Area Axis Travel - X-axis: 4000 mm - Y-axis: 1970 mm - Z-axis: 455 mm Machining Area - X working area: 3000 mm - Y working area: 1550 mm - Z clearance: 250 mm Axis Systems - X-axis: Helical rack and pinion drive - Y-axis: Precision ball screw drive - Z-axis: Precision ball screw drive - Linear guides on all axes - Automatic central lubrication Main Spindle - 5-axis electro spindle - Type: 5-axis spindle with universal joint - Power: 12 kW (S6 operation) - Tool holder: HSK F63 - Maximum speed: 24,000 rpm - Ceramic bearings with air cooling - Full power available at approximately 12,000 rpm - Speed range: 1,000 - 24,000 rpm - Clockwise rotation - Integrated tool changer interface - Liquid-cooled spindle - Electrically controlled extraction hood - Maximum tool weight: 6 kg - Maximum saw blade diameter: 350 mm Tool Changer System 12-position linear tool magazine - Mounted on the left side of the machine frame - Separate station for tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 240 mm 18-position disc tool magazine - Mounted on the gantry - Suitable for drilling tools and tool changers - Maximum tool diameter: 250 mm - Maximum tool length: 280 mm Drilling Aggregated Head DH18 6H 1S drilling head - 12 vertical spindles: 7 spindles in the X direction, 5 spindles in the Y direction - 4 horizontal spindles in the X direction - 2 horizontal spindles in the Y direction - Drilling stroke: 70 mm - Maximum drilling depth: 70 mm Ljdpfx Aozuw E Rehkjrr - Tool holder: 10 mm - Individual control of the spindles - Integrated slotting saw - Saw blade diameter: 120 mm - Maximum slotting saw blade thickness: 5 mm - Speed up to 7,500 rpm Vacuum and Clamping System Console Table - 6 consoles with front and rear stops - Wireless two-circuit vacuum system - Height of vacuum cups: 100 mm - Pneumatic console locking - Programmable pneumatic stops - 4 adjustable side stops - Reinforced support arms - Load-bearing capacity of the support arms: 40 kg each Vacuum Pump Capacity: - 90 m³/h at 50 Hz - 108 m³/h at 60 Hz - Additional vacuum connection for template machining - Controlled compressed air connections for frame clamps - Separate vacuum and compressed air switching for all consoles WoodFlash Software Package Control Panel - Complete machine operation via the CNC panel - Program creation and editing - Tool and workpiece management - Manual machine commands - Monitoring of vacuum, compressed air and safety systems Mobile Control Panel - 24" LED monitor - Keyboard and mouse - USB connection Operator Device for Feed Rate - Manual feed override potentiometer - Variable feed rate adjustment during machining Safety Devices - CE safety system - Safety mats instead of light curtains - Emergency stop system - Protective fence on the left side - Safety monitoring of the doors - Sensors to monitor vacuum and compressed air Optional Equipment - External release switch - Protected energy chain system - Additional locking for A and C axes - Saw blade changing station on the gantry - Operating hours: 6442 hrs.

Condition: used, Year of construction: 2021, - Cutting width: 1250 mm - Cutting length: 2800 mm Panel saw Manufacturer: Felder Format4 Type: Kappa 550 Year of manufacture: 2021 Technical data - Saw blade: 250 - 550 mm Lsdpfxszuy A Ej Ahkjrr - Cutting height: 202 mm (90°), 140 mm (45°) - 3 speeds: 3000/4000/5000 RPM - Cutting width: 1250 mm - Cutting length: 2800 mm - Control system: Kappa 550 e-motion - Surface area of the extension table: 1250 x 650 mm - Telescopic fence allows for crosscuts up to 3200 mm - The crosscut fence can be swivelled from 90° to 45° - Circular saw extension of 1200 mm behind the saw blade axis - The positioning of the parallel fence is done electronically via a ball screw integrated dust-free into the circular saw table Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2021, functionality: fully functional, Felder table router F 500 M, purchased on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Lrodpfjztxt Hjx Ahker Key technical data: - Machine type: Table router / Spindle router - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: approx. 3.0 kW, for F 500 MS approx. 4.0 kW, or depending on the configuration - Working height: approx. 916 mm - Weight: approx. 300–320 kg, depending on the version - Dust extraction connection: approx. 120 mm at the router fence No warranty

Condition: used, Year of construction: 2019, CNC Machining Center FELDER FORMAT4 Profit H200 13.33 Year of manufacture: 2019 New machine (used only for demonstration purposes in a school) Number of axes: 4 X-axis travel: 4000 mm Y-axis travel: 1670 mm Z-axis travel: 500 mm Technical specifications Spindle power: 12 kW Spindle speed: 24,000 RPM Additional information Working area (maximum panel size) X: 3300 mm Y: 1280 mm Z-distance: 250 mm Spindle: Tool interface: HSK F63 Rated power at: approx. 12,000 RPM Cooling: Air-cooled Rotation: CW / CCW Tool magazine Linear tool magazine (mounted on the side): 12 positions Additional linear magazine on the gantry: 4 positions Max. tool diameter: 250 mm Max. tool length: 300 mm Drilling unit Model: DH 24 6H 2S Vertical spindles: 18 (12 in X, 6 in Y) Horizontal spindles: 6 (4 in X, 2 in Y) Max. drill length: 70 mm Max. tool diameter: 10 mm Dadoing machines: 2 (X and Y) Max. saw blade diameter: 120 mm Max. speed: 6,000 RPM Vacuum table 6 supports (instead of 4) Ledpfezuxi Rjx Ahkjrr Two-circuit vacuum system Height of vacuum cups: 100 mm Pneumatic support locking Adjustable side stops (Y-axis) Axis system X-axis: Rack and pinion drive Y/Z-axis: Ball screw drive Linear guides in all axes Automatic central lubrication Control and software CNC control with CAD/CAM software 3D simulation preview DXF import capability Parametric programming Remote maintenance package (internet-enabled)

Condition: used, Year of construction: 2021, functionality: fully functional, power: 14 kW (19.03 HP), input voltage: 400 V, input current: 36 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 80 mm, cutting width (max.): 3,200 mm, overall weight: 4,200 kg, Equipment: documentation/manual, rotational speed infinitely variable, saw blade guard, scorer, We offer this used Felder kappa automatic 80 sliding table saw. Machine can be very fast in production if presented with an equally fast operator. The cuts are perfect, 90 degree angle is easy to adjust (and should be done regularly). We also offer all of the saw blades as well as undercutters we have to it. Model: kappa automatic 80 Voltage: 400 V Lrodpoy Dda Asfx Ahksr Phases: 3 Frequency: 50 Hz Current: 36 A Power: 14.0 kW Year of construction: 2021 year Weight: 4200 kg If you have any questions or need more information, feel free to send us a message or give us a call.