Used Felder Kfs 36 for sale (103)

Condition: good (used), Year of construction: 2017, operating hours: 130 h, functionality: fully functional, input voltage: 400 V, power: 6.5 kW (8.84 HP), input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Djdpfx Aeyfvhaec Njun Workpiece height: 10–45 mm Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: excellent (used), Year of construction: 2018, Edgebander Manufacturer: Felder Model: G360 Year of manufacture: 2018 Operating hours: approx. 813 h Edge thickness: 0.4 - 3 mm Workpiece thickness: 10 - 45 mm Duedpfxox Niuvo Ac Nen Feed speed: 8 m/min Total power: 5.5 kW Overall length: approx. 3,200 mm Pre-milling unit: Yes End trimming unit: Yes Flush trimming unit: Yes Radius scraper: Yes Surface scraper: Yes

Condition: used, Year of construction: 1993, functionality: fully functional, Panel saw, spindle moulder, combination machine, table saw, circular saw, carpenter’s saw, panel dividing saw, table router, tilting spindle moulder FELDER Model: KFS37 FL Year: 1993 Sliding table length: 245 cm Manual height adjustment of the saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment, up to approx. 75 cm Outrigger table with extendable crosscut fence Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the tilting spindle Manual tilting of the moulder spindle up to 45° to the rear Spindle diameter: 30 mm 3 spindle speeds, adjustable via belt Spindle can be lowered below table level and removed Duodpexycy Rjfx Ac Njn Spindle moulder motor power: 3 kW Cutter fence with fine adjustment and parallel guidance—Felder multi-adjustment system Fold-away support for power feeder Eccentric workpiece clamp Prior inspection is expressly recommended; please leave your telephone number by email and I will contact you to arrange a viewing appointment. Subject to prior sale. All information provided without guarantee. Machines can be collected in person or shipped by freight at the buyer’s expense. Loading and packaging can be organised by us. The quoted shipping costs are indicative; actual costs may vary depending on location and unloading facilities, please enquire. The item is offered under differential taxation. The displayed sales price is the gross final price. An invoice showing VAT separately will not be issued. Basis of warranty: Due to age and wear, sale is exclusively to commercial buyers with no warranty, guarantee, or return the claim. All information is without guarantee. By placing a bid, the buyer acknowledges this. For used items, warranty is 12 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, all warranties are excluded. For new items, warranty is 24 months if the buyer is a consumer within the meaning of §13 BGB. If the buyer is an entrepreneur within the meaning of §14 BGB, the warranty is 12 months.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,250 mm, travel distance Y-axis: 1,265 mm, travel distance Z-axis: 120 mm, saw blade diameter: 120 mm, Equipment: CE marking, Dismantling and loading can be handled by the seller! TECHNICAL DETAILS Working area X: 3,250 mm Working area Y: 1,265 mm Working area Z: 120 mm Tool holder: HSK-F63 Tool changer: 10 positions, mounted on the milling head Drilling and sawing units Vertical drilling spindles: 12 Horizontal drilling spindles X-axis: 4 Horizontal drilling spindles Y-axis: 2 Groove milling unit X-direction: 1 Saw blade diameter: 120 mm Table system Pod and rail table: available Consoles: 6 MACHINE DETAILS Drive data Main motor power: 9.2 kW Total connected load: 15 kW Vacuum pump capacity: 100 m³/h EQUIPMENT Positioning aid Safety mat Digital LED display on the consoles Auxiliary device for tool change Duedpfxsyddqmo Ac Non Two rows of stops Workpiece supports Handheld control device Pendulum processing CE marking

Condition: new, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 0711ST0619, feed rate X-axis: 13 m/min, rotational speed (max.): 12,000 rpm, Dismantling and loading can be handled by the seller! Auction of an unused Format 4 Felder Perfect 40! TECHNICAL DETAILS Feed rate: 13 m/min Maximum material thickness: 3 mm Main trim saw motor power: 0.5 kW Main trim saw motor speed: 12,000 rpm Trimming and profile unit motor power: 0.68 kW Duedpfx Asyddmnjc Njn Trimming and profile unit motor speed: 12,000 rpm Polishing unit motor speed: 1,400 rpm MACHINE DETAILS Electrical data Voltage: 400 V Phases: 3N Frequency: 50 Hz Power: 8 kW EQUIPMENT Guillotine for edging material up to 3 mm Teflon-coated glue pot for 3 kg EVA granulate Audio generator Glue roller with quick-change system Pneumatic pressure unit, 1 driven and 2 conical pressure rollers End trim saws with carbide-tipped blades Z = 24, d-100 x 20 x 3.2 mm Trimming and profiling unit with foldable option up to 15° Edge scraper for R = 2 mm Polishing unit with 2 motors

Condition: new, Year of construction: 2008, functionality: fully functional, feed rate X-axis: 9 m/min, workpiece height (max.): 60 mm, overall weight: 750 kg, rotational speed (max.): 12,000 rpm, Dismantling and loading can be handled by the seller! Auction of an unused Felder G 500! TECHNICAL DETAILS Edge thickness: 0.4-5 mm Workpiece height: 8-60 mm Feed speed: 9 m/min Spindle speed of milling unit: 12,000 rpm Minimum workpiece width: 70 mm Minimum workpiece length: 140 mm Radius scraper unit: R = 2 mm Djdeyddgzopfx Ac Njun Polishing unit: 2 motors at 1,400 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 3,200 x 1,100 x 1,550 mm Weight: 750 kg FEATURES High-performance chain feed Support for coiled edge material Guillotine blades for cutting coiled edges up to 3 mm Glue roller for EVA granulate from the Teflon-coated glue pot Spring-loaded pressure unit with 1 rubber pressure roller and 2 drive rollers Milling unit 0.27 kW, 100-tooth 24-tooth saw blade

Condition: new, functionality: fully functional, total length: 2,100 mm, total width: 900 mm, edge thickness (max.): 2 mm, total height: 1,250 mm, plate height: 45 mm, Dismantling and loading can be handled by the seller! Djdpfeydc Uwsx Ac Neun Auction of an unused Felder G 200! TECHNICAL DETAILS Edge thickness: 0.4 - 2.0 mm Panel height: 10 - 45 mm Feed speed: 5 m/min MACHINE DETAILS Dimensions (L x W x H): 2,100 x 900 x 1,250 mm Required compressed air: 6 bar EQUIPMENT Pneumatic end-cutting guillotine Flush and radius trimming module (a = 15°, R = 2 mm) Teflon glue pot Electric temperature control (20 - 250 °C)

Condition: like new (used), Year of construction: 2024, For sale: Felder RL-160 clean air extraction unit with a maximum air volume flow of 3,200 m³/h. The extraction unit is currently in use as a demonstration model in our showroom and is therefore in as-new condition. Technical data: - Max. air volume flow: 3,200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Manual filter cleaning - H3 dust-tested - Year of manufacture: 2024 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Duodpeyh Ai Hjfx Ac Njn Reference: R-A0117

Condition: new, Year of construction: 2018, Working width: 410 mm Cutterhead: reversible knives Number of knives: 4 Jointer table length: 2000 mm Dujdpfx Acoyhgh No Njn Jointer fence angle adjustable: yes Jointer tables fold up: manual Maximum thicknessing capacity: 240 mm Thicknessing table height adjustment: handwheel Display for planing thickness: mechanical counter Feed speed: 6/12 m/min Infeed roller: steel Outfeed roller: steel Table rollers: no Motor power: 3 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 450 kg

Condition: used, Year of construction: 2018, functionality: fully functional, cutting width (max.): 1,250 mm, cutting width at rip fence: 1,250 mm, cutting height (max.): 104 mm, cutting height with scoring (max.): 104 mm, saw blade diameter: 315 mm, table length: 3,200 mm, main saw diameter: 315 mm, height adjustment type: mechanical, overall weight: 750 kg, extraction nozzle diameter: 120 mm, trimming length: 3,200 mm, type of input current: three-phase, input voltage: 400 V, extraction connection diameter: 80 mm, – Austrian manufacture – year of production: 2018 – X-Roll carriage guiding system – User manual DTR and CE certificates TECHNICAL PARAMETERS: – carriage length: 3200 mm Dujdpfx Acoyhdu Te Non – cutting width on the right: 1250 mm – saw blade diameter, max.: 315 mm – scoring blade diameter: 100 mm – main motor: 5.5 kW – scoring motor: 0.75 kW – brake – X-Roll carriage guiding system – cutting height adjustment – manual angle adjustment: 0° - 45° – max. cutting height: 104 mm – option for mounting cutter: thickness: 6 - 20 mm – max. cutter diameter: 228 mm – two detents – movable guard – extraction port diameter: 80 & 120 mm – dimensions (L/W/H): 340 / 210 / 170 cm – weight: approx. 750 kg

Condition: used, Year of construction: 2008, functionality: fully functional, cutting length (max.): 3,000 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height with scoring (max.): 40 mm, saw blade diameter: 315 mm, height adjustment type: mechanical, trimming length: 2,500 mm, – Austrian manufacture – Year of manufacture: 2008 – Saw blade guard – With scoring unit TECHNICAL SPECIFICATIONS: – Sliding table length: 2500 mm – Max. main blade diameter (without scorer): 315 mm – Max. main blade diameter (with scorer): 250 mm – Blade bore diameter: 30 mm – Max. cutting height with 250 mm blade: 40 mm – Spindle lock – Main blade adjustable up/down and tiltable – Blade guard – Incl. sliding table – Cutting width at rip fence: 1300 mm – Main motor: 4 kW – Fence with ratchet: 1700 mm – Scoring unit – Max. scorer blade diameter: 80 mm – Scorer spindle diameter: 20 mm – Scoring motor: 0.65 kW – Extraction port diameter: 50, 100 mm Dedpjxm Rm Sefx Ac Nsun – Transport dimensions (L/W/H): 250 / 170 / 110 cm – Weight: 454 kg

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut Dodew I H Rkspfx Ac Neun With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: excellent (used), Year of construction: 2003, For sale is a used Felder planer-thicknesser AD7-31 with a planing height of up to 230 mm. The machine is in very good condition and has been refurbished and inspected by our professional staff (fully functional). Technical data: - Planing/thicknessing width: 310 mm - 4-knife cutterblock (reversible knife system) - Tiltable planer fence - Thicknessing height: 4–230 mm with handwheel and digital readout - Dual foldable planing tables - 2 feed speeds: 6 and 12 m/min Duedpfoygg Rhjx Ac Nsn - 5.5 HP (4 kW) motor, 400 Volt The planer-thicknesser is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: planer-thicknesser, thickness planer, Felder Reference: R-R00BE

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Duedpfx Acsxg Igie Non

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Location: Supplier Duodpfjxta Dyjx Ac Nen

Condition: used, Year of construction: 2016, Sliding table 2800 mm, cutting width 1250 mm, controlled parallel fence, kappa 400 X, tilting saw unit 45°, saw blade diameter: 250 - 400 mm, max. cutting height: 133 mm, electric height adjustment, motor 5.5 kW, 3 speeds: 3500/4500/7500 rpm. X Motion screen control (touch function) at eye level, additional scoring function, easy-lock quick-change system for main saw blade. Location: Supplier Dsdpfxoxta Dme Ac Njun

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618 Djdpfx Acswp Ri Ue Noun

Condition: like new (used), Year of construction: 2017, For sale is a Felder RL-300 clean air dust extraction unit with a maximum airflow of 6,000 m³/h. The extraction unit is in like-new condition and has been inspected and reconditioned by our professional staff. Technical data: - Extraction capacity: 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm (right) - Chip container volume: 2 x 210 liters - JET filter cleaning - Fire extinguishing system with water connection - 11 HP (8.2 kW) motor / 400 Volt 32A - Automatic star-delta starter Dedpfx Ajyffbvsc Njun The clean air unit is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-N4529

Condition: excellent (used), Year of construction: 2015, For sale is a used Felder KF 700 SP panel saw and spindle moulder with a cutting width of 800 mm. The machine is in excellent condition and has been serviced and inspected by our qualified technicians. (Fully functional) Technical data: - Tilting saw and spindle moulder 90-45° - Sliding table 2800 mm - Extension table with mitre fence - Scoring unit with 1 HP motor - Cutting width 800 mm - Spindle fence 240 mm with multi-adjust system - 4 spindle speeds - 2 motors, each 4 kW (5.5 HP) The machine is located at A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Djdpfxoyd Rdyo Ac Noun Related terms: saw, panel saw, spindle moulder, combined machine, combination machine, milling machine Reference: R-Z1580

Condition: excellent (used), Year of construction: 2018, Surface Planer FELDER / HAMMER Planing width: 410 mm Motor power: 4.0 kW, 400 V, 50 Hz Silent-POWER spiral cutter block Number of knives: 62 Max. cutting depth: 4 mm Adjustment lever for planing depth Planing table length: 1800 mm Duedpfx Aceydnpts Njn Tiltable fence 90°–45°, anodized Fence size: 150 x 1100 mm Extraction port diameter: 120 mm Emergency stop Ready to plug in with phase inverter CE compliant Approx. dimensions (L x W x H): 1900 x 800 x 1000 mm Approx. weight: 340 kg Note on used machines: • Technical details are subject to error and prior sale. • Listed prices are pick-up prices ex location – free loading! • The machine has been cleaned and function tested. • All machines are sold as seen without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Condition: as good as new (ex-display), Exhibition Machine For sale is our Felder RL-200 clean air extraction unit from our showroom, with a maximum air flow of 4,000 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical Data: - H3 dust-tested - Extraction connection diameter: 200 mm - Extraction possible on both right and left sides - Automatic chip shaker - Steel impeller - Max. air flow 4,000 m³/h - Minimal space requirement: 1,775 x 898 x 2,005 mm (L x W x H) Dedpexdkzqjfx Ac Nsun - Year of manufacture: 2022 - Machine No.: 31.04.114.22 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-L0CE0

Condition: used, Year of construction: 2012, functionality: fully functional, milling spindle length: 130 mm, height adjustment type: mechanical, table length: 2,070 mm, type of input current: three-phase, spindle diameter: 30 mm, spindle speed (max.): 10,000 rpm, extraction connection diameter: 100 mm, input voltage: 400 V, rotational speed (min.): 3,500 rpm, rotational speed (max.): 10,000 rpm, working length of spindle: 130 mm, Equipment: motor brake, – Year of manufacture: 2012 – Austrian production – Spindle adjustable from 0° to 45° – Sliding table for tenoning operations – CE marking TECHNICAL SPECIFICATIONS: – Spindle diameter: 30 mm – Spindle height: 130 mm – Maximum tool diameter (allows use of large milling tools): 230 mm – Maximum tool diameter at 45°: 125 mm – 4 spindle speeds: 3500 / 6500 / 8000 / 10000 rpm – Main motor power: 5.5 kW – Electric motor with brake – Table dimensions (L x W): 780 x 970 mm – Sliding table dimensions (L x W): 2070 x 350 mm – "x-Roll" sliding table – Manual height adjustment Dsdpjycqiysfx Ac Neun – Manual angle adjustment: 0° - 45° – Quick-change spindle system – Fence on carriage – Additional table on carriage – Right/left rotation – Extraction port diameters: 100 and 80 mm – Transport dimensions (L/W/H): 220 x 90 x 150 cm – Weight: approx. 350 kg

Condition: used, Year of construction: 2022, 0,4 - 5 mm Dsdpfxsxpn Ufs Ac Nsun Workingpiece thickness from to 10 - 45 mm Feed speed 8 m/min.

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Duodjyf I T Uopfx Ac Nen Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Scraper knife

Condition: like new (used), For sale is a used Felder AF-12 extraction unit with a maximum air flow rate of 1,350 m³/h. The machine is in like-new condition and has been inspected and serviced by our qualified staff. Djdpfx Aceycdqwo Nsun Technical specifications: - Extraction capacity: 1,350 m³/h - Maximum negative pressure: 1,800 Pa - Chip collection volume: 100 liters - Extraction connection diameter: 120 mm - Motor power: 1.5 kW / 2 HP - Year of manufacture: 2025, like new The extraction unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction unit, dust extraction Reference: R-H705E