Used Internal Threading Machine for sale (70,457)

Condition: used, Bench Drilling and Tapping Machine FLOTT Type TBZ 15 GL Serial No. 32177027 Year of manufacture: 1986 Drilling capacity: 15 mm Spindle taper: MT2 Throat depth: 195 mm Quill stroke: 80 mm Table size: 275 x 200 mm Kwsdpfx Aedzp S Nof Tst Column diameter: 70 mm Spindle speed: 80 - 4500 rpm, 18 steps Motor power: 0.55 + 0.75 kW Power supply: 380 Volt, 50 Hz - Spindle speed adjustable via 2 motor speeds, 6 belt stages from the motor and 2 belt stages to the spindle - Drill head height adjustment by hand crank with rack on the column - Emergency stop - 3 guide bushings: 0.7 mm + 0.8 mm and 28G included - 1 drill chuck Ø 1.5 to 13 mm - Original metal base Space required L x W x H: 700 x 350 x 1850 mm Weight: 165 kg Good condition

Condition: excellent (used), Tapping attachment Efem No.1 Kodpotqlq Eofx Af Tswt for internal thread Mounting MK 2 Tapping head Adjustable slip clutch Thread M3 - M10 Mechanical condition very good optically there are traces of storage

Year of construction: 2026, condition: as good as new (ex-display), JT3150 Electronic Threading Machine Kjdpfjhpqadjx Af Towt easy operation via display directly on the motor, Blind hole depth programmable, Technical details: -Brushless motor 750 watts 220V -Multifunctional head -3-fold articulated arm system -Tapping capacity in steel M3-M16 -Outreach up to 1900mm -Spindle GR2 Accessories: -Positioning magnet size 2 -quick change adapter size 2 -M3-M4-M5-M6-M8-M10-M12-M14-M16 -control on motor -drill chuck (1-13mm)

Condition: good (used), Hagen & Goebel HC 22 E / Thread Cutting Machine - Speed range: 56 - 355 rpm - Table dimensions: 600x500 mm - Year of manufacture: 1988 Dimensions: LxWxH 1.1x0.7x2 meters / Weight 900 kg Subject to errors and input mistakes. Kodpfox Edbmox Af Towt

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm Kedpfx Afoupbf Do Tswt throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 throat depth 250 mm Kwodpfx Ashgnd Asf Tst Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: good (used), functionality: fully functional, Thread cutting capacity in ST 60 M 22 Thread cutting capacity in cast iron M 27 8 speeds 180 - 1120 rpm Kjdpoxx Ridsfx Af Tswt Console version with height-adjustable head . with - or - without ROMAI multi-spindle .

Condition: good (used), Hagen & Goebel - HG 22 EB / Thread Cutting Machine - Model HG 22 EB - Speed range: 180-1120 rpm - Table dimensions: 600x500 mm - Foot switch Kjdoxvig Njpfx Af Tjwt Dimensions: LxWxH 1.1x0.7x2 meters / Weight 900 kg Subject to errors and omissions.

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 24 mm, Model RE16 to M16, model RE24 to M24 - ball bearing mounted wear-free parallel arm with radii of 1270 or 1800mm - Connection 230V / 1Ph - Infinitely variable speed adjustment - Digital speed display Kedorb Akmepfx Af Tswt - digital depth control with memory for 5 programs - quick-change holder according to DIN standard Options: Micro spray system for model 1800 Cast iron table Wheels for cast iron table Multifunctional head for cutting at any angle

Condition: new, Hydraulic tapping machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread M 5 - M 24 Working range 2050 Rmax. Kwodpfx Afotbawke Tst Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic tapping machine Incl. machine base with clamping disk Mobile Hydr. pressure gauge Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: good (used), Year of construction: 1974, internal diameter 25 - 300 mm grinding depth 250 mm swing diameter 50 mm centre height 300 mm internal grinding diameter 25 - 300 mm spindle bore 70 mm Kwedpfx Afeyb S Rve Tst spindle speeds 45 - 450 mm inclination 30 ° table movement in milling step automatic 600 mm/min table speed - backwards 0 - 10 m/min spindle turning speed range 3000 - 18000 U/min spindle diameter 120 mm total power requirement 12 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 4,0 x 1,9 x 1,8 m

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min Kjdpfjyb S Riox Af Towt relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories.

Condition: excellent (used), thread dia. 10 - 150 mm grinding length 900 mm thread pitch max. 3 mm workpiece diameter max. 260 / 340 mm threading length max. 50 mm centre distance 1200 mm centre height 1100 mm grinding wheel diameter 275 - 400 mm grinding wheel width 14/20/30/40/50 grinding head-swivable, cross 4 re / 1 li ° max. stroke of grinding wheel 140 mm peripheral speed max. 35 m/sec total power requirement 14 kW Kjdsyb S N Sopfx Af Tswt weight of the machine ca. 5,8 t dimensions of the machine ca. 5,0 x 2,0 x 2,1 m

Condition: used, Threading machine, pipe threader, Ridgid 300, used machine Manufacturer: Ridgid Type: 300 Kwedpoybbamjfx Af Tjt Overall dimensions: Width: 1180 mm Depth: 1250 mm Height: 1500 mm Electrical data: 230V Functions: Thread cutting, cutting to length, deburring

Condition: good (used), Thread cutting machine, pipe thread cutter Kwsdpfxox I Agps Af Tet -Manufacturer: Rothenberger, Thread cutting machine type Supertronic 2SE without thread cutting head -Pipe size: 1/2 to 2 inches -Spindle bore: Ø 68 mm -Operating voltage: 230 volts -Speed: 40 rpm -Foot switch: with emergency stop function -Equipment: Pipe cutter, internal deburrer -Dimensions: 500/480/H370 mm -Weight: 46.6 kg

Condition: excellent (used), Year of construction: 2015, Roll pressure infinitely adjustable from 240 kN feeds - fine adjustment 0,5-45 mm/min turning speeds 0-80 U/min Swivel angle of the roller heads 11 ° Diameter of the roller spindles 69,85 mm Stroke - Roller screw slide 0-150 mm min. dist. - roller screws 138 mm max. dist. - roller screws 285 mm min. diameter - Rolling tools 230 mm max. diameter - Rolling tools 135 mm min. dia. 2 mm Kwsdpfexukrqsx Af Tjt max. diameter 55 mm thread length at plunge operation 200 mm thread length at continiuous operation 2000 mm maximum thread pitch 4 mm total power requirement 14 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 2,0 x 2,5 x 1,9 m Rolling time continuously adjustable from: 0.1s Pause time continuously adjustable from: 0.1s Rolling spindle length: 200mm Machine bed height: 810mm Rolling spindle height above machine bed: 200 mm Height of support bearings: 115 mm Largest pitch for serrated teeth: 2.5 mm (up to 70 kg/mm2 Strength of the material)

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1700 Electric Tapping Machine – Advanced Threading for Industrial and Workshop Applications The CORMAK RGE36PWx1700 electric tapping machine is an advanced threading solution that performs exceptionally well in both large production plants and smaller workshops. Design and Technology of the CORMAK RGE36PWx1700 Tapping Machine The CORMAK RGE36PWx1700 features a robust construction that enables efficient and precise threading in a wide range of industrial environments. It is powered by a servo drive, ensuring reliable operation and precise control of tapping parameters. Thanks to the tapping arm and rotating motor assembly, the machine can cut threads in various materials such as steel, stainless steel, aluminum, and non-ferrous metals. The tapping arm is equipped with a quick-change chuck, allowing fast and easy installation of taps. Adjustable overload clutches integrated into the tap holders provide additional protection against tool damage during operation. This system also allows precise torque adjustment, ensuring high threading accuracy. Precision and Work Efficiency of the CORMAK RGE36PWx1700 The performance of the CORMAK RGE36PWx1700 is the result of modern technology combined with a heavy-duty design, ensuring long-term, reliable operation. The servo drive and rotating arm deliver high precision while maintaining fast threading cycles. Adjustable rotational speed and thread depth make the machine ideal for cutting threads with varying specifications. The threading process is further supported by a micro-spray system that effectively cools the tools, improving efficiency and extending tool life. Standard Equipment – CORMAK RGE36PWx1700 Touchscreen control panel – easy programming of tapping parameters such as rotational speed, tapping direction, and thread depth Rotating tapping arm – enables thread cutting at any angle Kwodpfjycdhpsx Af Tot Tap holders with adjustable overload clutches – protect the machine from excessive load and ensure long service life Micro-spray lubrication system – continuous tool cooling with minimal coolant consumption Chip blower – effective chip removal and improved visibility during tapping Technical Specifications – CORMAK RGE36PWx1700 Power: 2 kW Power supply: 230 V Weight: 56 kg Maximum arm reach: 1700 mm Maximum rotational speed: 125 rpm Included in the set: Tap holders for tap sizes from M5 to M36 *The machine is sold without a worktable, vise, and taps.

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1200 Electric Tapping Machine – Advanced Precision for Industrial Applications The CORMAK RGE36PWx1200 electric tapping machine is an advanced tool designed for efficient and highly precise threading in industrial environments. Design and Technology of the CORMAK RGE36PWx1200 Tapping Machine The CORMAK RGE36PWx1200 has been engineered for intensive use in demanding industrial conditions. Its construction is characterized by high wear resistance and long service life. Driven by a servo motor, the tapping mechanism operates smoothly and without interruption. The tapping arm allows precise tool positioning, while the rotating motor assembly enables threading at various angles, increasing the machine’s versatility. Key design features of the CORMAK RGE36PWx1200 include: Tapping arm with quick-change chuck, enabling fast and secure mounting of taps Adjustable overload clutches, providing protection against excessive load Kjdpfxsycdcgo Af Tewt Heavy-duty machine construction with micro-spray system, ensuring effective tool cooling, reduced lubricant loss, and extended tool life Efficient chip blower, ensuring optimal visibility during threading operations Precision and Work Efficiency of the CORMAK RGE36PWx1200 The CORMAK RGE36PWx1200 tapping machine delivers exceptional precision through the use of a modern servo drive and a rotating tapping arm. These advanced technologies allow quick and accurate setting of parameters such as rotational speed, thread depth, and tapping direction. The machine not only guarantees precise threading but also significantly faster operation compared to traditional manual methods. Work efficiency is further enhanced by integrated cooling systems that effectively prevent tool overheating and reduce wear. Thanks to these solutions, the machine can operate continuously, ensuring long-term productivity and consistent thread quality. The adjustable tapping arm enables precise machine positioning, which is crucial when threading large batches of components. Standard Equipment – CORMAK RGE36PWx1200 Touchscreen control panel – easy programming of tapping parameters such as rotational speed, tapping direction, and thread depth Rotating tapping arm – allows thread cutting at any angle Tap holders with overload clutches – protect the machine from excessive load and ensure long service life Micro-spray lubrication system – continuous tool cooling with minimal coolant consumption Chip blower – effective chip removal and improved visibility during tapping Technical Specifications – CORMAK RGE36PWx1200 Power: 2 kW Power supply: 230 V Weight: 56 kg Maximum arm reach: 1200 mm Maximum rotational speed: 125 rpm Included in the set: Tap holders for tap sizes from M5 to M36 *The machine is sold without a worktable, vise, and taps.

Condition: new, Year of construction: 2026, CORMAK RGE30PW Electric Tapping Machine – Innovation, Precision, and Industrial Performance The CORMAK RGE30PW electric tapping machine is an innovative industrial tool that will revolutionize the way you cut threads in a wide range of materials. Design and Technology Kwjdpfx Ajycdaljf Tot The CORMAK RGE30PW electric tapping machine has been designed with efficiency, precision, and durability in mind. Its robust construction ensures long-term, trouble-free operation even under intensive use. Key components, such as the tapping arm, are engineered to provide exceptional stability and high accuracy during threading operations. A servo drive is the core element of the machine’s drive system, delivering high torque and ensuring smooth, accurate tapping. Thanks to the integrated cooling and chip removal systems, the CORMAK RGE30PW can operate continuously without the risk of overheating or contamination of the workpieces. The integrated micro-spray system and chip blower enhance operator comfort and machining efficiency by ensuring optimal tool cooling and clear visibility of the working area. Precision and Work Efficiency The CORMAK RGE30PW electric tapping machine offers outstanding precision through the use of advanced servo drive technology and a modern control system. The rotating tapping arm with a wide range of motion allows threading at any angle, significantly increasing the versatility of the machine. Adjustable rotational speed and thread depth provide full control over operating parameters, ensuring excellent thread quality in various materials. Standard Equipment – CORMAK RGE30PW Tapping Machine Touchscreen control panel – allows easy programming of tapping parameters such as rotational speed, threading direction, and thread depth Rotating tapping arm – enables thread cutting at any angle Tap holders with overload clutches – protect the machine from excessive load, ensuring long service life Micro-spray lubrication system – continuous tool cooling with minimal coolant consumption Chip blower – enables effective chip removal and improves visibility during tapping Technical Specifications – CORMAK RGE30PW Power: 1.2 kW Power supply: 230 V Weight: 50 kg Maximum arm reach: 1200 mm Maximum rotational speed: 200 rpm Included in the set: Tap holders for tap sizes from M5 to M30 *The machine is sold without a worktable, vise, and taps.

Condition: new, Year of construction: 2025, CORMAK RGE16PW Electric Tapping Machine – Precision and Performance for Industrial and Workshop Use The CORMAK RGE16PW electric tapping machine is an advanced device designed for cutting threads in a wide range of materials. It is suitable for both industrial applications and craft workshops. Design and Technology The CORMAK RGE16PW tapping machine has been engineered for intensive operation in demanding industrial environments. Its design is based on robust, precision-made components that ensure long-term reliability and consistent performance. The central element of the machine is the tapping arm equipped with a quick-change chuck, allowing fast and easy replacement of taps. This enables quick switching between different tap sizes, significantly improving work efficiency. The tapping arm is connected to a high-torque servo drive, enabling precise thread cutting. The use of a rotating arm provides excellent flexibility, allowing tapping at any angle, which makes the machine a versatile tool across various industries. In addition, the tap holders are equipped with adjustable overload clutches that protect the machine from damage in the event of excessive load. The entire structure of the CORMAK RGE16PW is designed for ease of use and durability. The drive mechanism is resistant to heavy-duty operation, while the cooling system ensures stable performance during long tapping cycles. Precision and Work Efficiency Kwedpfxoycc S Ts Af Tst The tapping process using the CORMAK RGE16PW electric tapping machine delivers exceptional precision thanks to servo drive technology, which controls every movement of the tapping arm with high accuracy. The control system allows programming of key operating parameters, such as: Rotational speed – adjustment of the tap speed ensures optimal conditions for different materials, resulting in high-quality threads. Tapping direction – the ability to select the threading direction provides flexibility for various applications. Thread depth – precise setting of tapping depth, essential for threads with specific technical requirements. Standard Equipment of the CORMAK RGE16PW Tapping Machine Touchscreen control panel – enables easy programming of tapping parameters such as rotational speed, threading direction, and thread depth Rotating tapping arm – allows thread cutting at any angle Tap holders with overload clutches – protect the machine from excessive load, ensuring long service life Micro-spray lubrication system – continuous tool cooling with minimal coolant consumption Chip blower – facilitates chip removal, improving visibility during tapping Technical Specifications – CORMAK RGE16PW Power: 0.6 kW Power supply: 230 V Weight: 30 kg Maximum arm reach: 1080 mm Maximum rotational speed: 375 rpm Included in the set: Tap holders for M3, M4, M5, M6–8, M10, M12, M13, M16 *The machine is sold without a worktable, vise, and taps.

Condition: good (used), Year of construction: 1995, functionality: fully functional, Technical details internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Kwedpfx Aex Ux T Eof Tst Machine documentation

Condition: used, Powerflex IV Thread Cutting Machine, Thread Cutter M8 - M27 75 rpm - 900 rpm Reach: max. 1200mm radius Year of manufacture: 2008 You are welcome to schedule an inspection appointment. Kodsq U Sfpepfx Af Tswt We can also arrange affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT number is supplied. Subject to prior sale. Visit our shop and check out our other offers as well. The specified company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are reserved.

Condition: used, Year of construction: 1989, centre height 250 mm centre distance 600 mm Dimensions (L/W/H) 3600 x 1900 x 2100 mm Kwjdpfoxzuzcsx Af Tet weight of the machine ca. 2,25 t

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: MT1212_38, warranty duration: 36 months, Multitapper 1212 automatic threading machine CoastOne - Made in Finland New machine Working area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optional 4) 2x thread cutting; 1x countersink drilling station Micro lubrication for every spindle / tool station Kodjxd U R Nopfx Af Tjwt Control: TC15 touchscreen Numerical entry, import of punches - NC files

Condition: excellent (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, machine/vehicle number: MT1212_2025_28, working range: 1,250 mm, overall weight: 1,400 kg, compressed air connection: 6 bar, total height: 1,610 mm, total length: 2,550 mm, type of input current: AC, warranty duration: 36 months, workpiece weight (max.): 80 kg, table width: 1,250 mm, air pressure: 6 bar, input current: 16 A, table length: 1,250 mm, space requirement height: 1,610 mm, space requirement length: 2,550 mm, space requirement width: 1,770 mm, Equipment: documentation/manual, rotational speed infinitely variable, Multitapper 1212 Automatic Threading Machine CoastOne - Made in Finland Demonstration Machine Ksdpfx Ajxx R H Aof Towt Machining area: 1250 x 1250 mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) 2 thread cutting and forming stations; 1 countersinking and drilling station Micro-lubrication for each spindle/tool station Control: TC15 touchscreen Numeric input, import of punch and NC files Warranty: 36 months after installation Immediately available; subject to prior sale Viewing under power is possible at any time by appointment