Used Internal Threading Machine for sale (70,399)

Condition: good (used), Made in Germany - min. bore: 6 mm - max. bore: 50 mm - max. grinding length: 80 mm - max. clamping diameter: 235 mm - distance spindle / table center: 145 mm Lodpfoda A Eiex Ad Nohb - spindle speed: 640 und 1000 rpm - swivel angle from spindle to one side: 10° - max. table speed, hydraulic adjustable:: 12 m/min. - max. distance spindle / grinding device: 550 mm - power consumption: ca. 8 kW - weight: 2000 kg

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Lhodpsxf Ikfefx Ad Nsb

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm Lhodpfxewmnhpj Ad Nsb - Weight approx. 100 kg

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Technical data: - Tapping capacity M 3 - M 24 Ljdpfx Adert Unwo Njhb - Working range (swivel radius) 1800 mm - Infinitely variable speed adjustment up to 475 rpm - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Year of construction: 2014, condition: good (used), machine/vehicle number: 2014-1313, Offer 22651 Technical data: - mobile version with motorized forward - reverse drive + steering - mot. grinding stroke forward - backward with speed control - grinding stroke longitudinal forward + backward - mot. contact pressure - grinding pressure regulation - grinding belt dimension approx. 2000 x 50 mm - contact wheel B 60 / D 300 mm - pneumatic connection 6 bar Ledpfxsi Apb Ns Ad Nehb - drive 400 V / 2880 rpm / 7 kW - space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

Condition: used, internal diameter 340/440 mm grinding depth 99999 mm grinding diameter 250,350,450 mm grinding length 600 mm centre height 125,175,225 mm bore 127 mm MK5 work piece spindle speed 20-400 U/min grinding head swivelling 360 ° grinding spindle head - swivable 180 + - ° grinding spindle speed 1500,1700,2200 U/min 0,001-0,030 mm/Ø 0-0,95 mm/Ø ±10 ° longitudinal feed of the table 900 mm table speeds 0,02-6 m/min 130 kg 130 inkl. Spannugkg kg 70 mm total power requirement 6,5 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your metrical overhauled and repainted with: -Neuem CE konformem Schaltschrank. -Neuem Werkstückspindelmotor und Regler in Drehstromtechnik. -Digitalanzeige in 2 Achsen. Auflösung x-Achse 0,5my Optionen: -Drehgeber mit digitaler Anzeige im Werkstückspindelstock -Drehgeber mit digitaler Anzeige im Schleifspindelstock (keine Höhenverstellung mit Spindel möglich) -Neue stabile Innenschleifvorrichtung Durchmesser 80mm oder 100mm mit Höhenjustierung. -Erhöhung der Spitzenhöhe auf max. 225mm -Drehzahlregelung für die Schleifspindel Inklusive: -Bedienwerkzeug -Spannrohr für Futter weiteres Zubehör auf Anfrage. Lhsdpfxed Ih Dxs Ad Nsb Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, honing diameter 99999 mm stroke 99999 mm throat 99999 mm Used panel of a NAGEL MSU2 Lhodpfx Adov Twgie Nsb No warranty

Condition: used, honing diameter 99999 mm stroke 99999 mm Ledpfev Tqqhex Ad Nohb throat 99999 mm Used Treiber from a Nagel MSU2 control No warranty

Condition: used, honing diameter 99999 mm stroke 99999 mm Lodpfx Adov Tqquo Njhb throat 99999 mm Used without warranty

Condition: used, Year of construction: 2000, honing diameter 45 mm Lodpfx Ajxddq Eed Nohb stroke 1000 mm 4 spindle honing machine for guns Honing area according to the manufacturer: Diameter 5-45mm Maximum Honing Length 750mm Accessories: Honing tools for diameter: -10mm -12,3mm -13,3mm -21,1mm

Condition: used, Year of construction: 2010, honing diameter 54 mm stroke 99999 mm centre height 9999 mm Control FANUC CNC Ball and spherical honing machine Lhedpevk Nkuofx Ad Nob

Condition: ready for operation (used), Year of construction: 2005, functionality: limited functionality, spindle speed (min.): 31,000 rpm, Equipment: rotational speed infinitely variable, We are offering for sale, due to a trade-in, a TOS BDU 250 A internal cylindrical grinding machine with the following specifications: Grinding diameter: 250 mm Maximum longitudinal table travel: 600 mm Maximum internal diameter: 250 mm Smallest diameter: 10 mm Workpiece spindle speed: 25; 45; 80; 140; 250; 450 rpm Internal grinding spindle mount: Currently Ø 100 mm Lodpfx Ajw Rllxjd Njhb Maximum diameter without chuck guard: 470 mm Adjustment of grinding headstock: 15° and 90°, mounted on an oscillating longitudinal table. Equipment: - Coolant tank - Hydraulic unit - Used internal grinding spindle - Machine lamp - Documentation and operating manual Machine information: Machine fault (transformer faulty, automatic operation possible only without dressing device).

Condition: used, Year of construction: 2001, functionality: fully functional, Thread sewing machine equipped with a 4D sheet feeder: 4 openings above, 4 openings below, and LAP system for section opening with claw. Monitor, electronic programming of the openings, automatic pre-setup, thread cutter. Lhsdpfx Ajxdmxlod Njb

Condition: new, Year of construction: 2025, OSTERBERGER RB+G1300K Lhjdpoxc Uvcofx Ad Nob Brand new conventional radial arm drilling and tapping machine Drill spindle radius 1,300 mm – Working area 2,200 mm x 1,600 mm Pneumatic radial arm clamping Maximum workpiece height 600 mm Drill spindle speeds 10 to 500 rpm – Drill spindle torque 72 Nm Max. drilling capacity in steel – with twist drill Ø16 mm / with hole saw Ø35 mm Tapping capacity – from M3 to M18 in steel Drill spindle stroke – 135 mm Work table size 1,800 x 1,000 mm with 7 T-slots and integrated tool cabinet Height adjustment range of the boom arm (on the drill column) 750 mm Dimensions approx. 1.9 x 1.4 m Weight approx. 950 kg Features: - Coolant system - Depth sensor for blind hole drilling - Quick-change tool holder

Condition: good (used), Year of construction: 1985, Grinding depth 300 mm Height of centers 300 mm Cross movement of the grinding wheel head 150 mm Min. grinding diameter 20 mm Max. grinding diameter 300 mm Spindle head (U axis) 300 mm Workpiece spindle head (B-Axis) +/- 32° (-23°) +2° Max. table longitudinal movement 650 mm Lhsdpfx Adjwrzzms Nob Machine weight approx. 7.5 t

Condition: good (used), Year of construction: 2011, CNC 235 BUDERUS HARD TURNING/GRINDING CENTER, 2011 Equipped with: Main Spindle 2-I.D. Grinding Spindles 8 Position Turret Lhjdpfxjrtryys Ad Nob Siemens 840D Control Hydraulic Chucking Rotary Dresser Chip Conveyor Gantry Loader Marposs E9066M Hydraulic System Chip Bucket Fire Suspension Sysem Chiller Specifications: Number of Main Spindles: 1 Maximum Work Part Diameter: 200 mm Maximum Part Length: 150 mm Maximum Number Machining Station: 4 Rapid Feed/Speed X/Z: 90/30 m/min

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Lhjdpfxjh A S Hto Ad Njb Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Ledpfeuz If Nex Ad Njhb Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00049781, workpiece diameter (max.): 50 mm, spindle diameter: 69 mm, spindle speed (max.): 5,000 rpm, stroke length: 130 mm, roll spacing: 255 mm, TECHNICAL DETAILS Contact surface: 180 mm Workpiece diameter: 4 - 50 mm Rolling pressure (infinitely variable): 0-200 kN Feed (infinitely variable): 0-50 mm/s Rolling cycles per minute: 0-86 Rolling spindles Rolling spindle diameter: 69.85 mm Distance between rolling spindles: 125 - 255 mm Spindle mounting length: 160 mm Traverse of the rolling spindle slide: 130 mm Rolling spindle speed: 3000-5000 rpm Rolling tool diameter: 130 - 200 mm Machine bed height: 800 mm Lhsdpfoxbfwzjx Ad Nob Height of rolling spindle above machine bed: 160 mm MACHINE DETAILS Control system: SIEMENS SIMATIC C7 Voltage: 400 V, 50 Hz Dimensions & Weight Machine height: 1,600 mm Weight: 2,400 kg

Condition: ready for operation (used), Ridgid 1224 Threading Machine, Thread Cutter, Used Machine Overall dimensions: Length: 1140 mm Width: 720 mm Height: 1110 mm Capabilities: Pipe threading: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) with 161 geared threading attachment. Bolt threading: 1⁄4″ – 2″ (6 – 52 mm). Features: Threads 1⁄4″ – 2″ pipe at 36 RPM and 2½″ – 4″ pipe at 12 RPM. Lodpfxewwgvyj Ad Nshb Model 1224 is suitable for threading various types of pipes including black, galvanized, plastic-coated pipes, as well as stainless steel, IMC, and heavy-wall pipe and rod up to 30 Rockwell C hardness. Induction motor ensures noise levels remain within regulatory limits. Special capacitor start/capacitor run motor allows full-range threading even under voltage drop conditions. Uses a 1⁄4″ – 2″ universal die head and a 2½″ – 4″ adjustable die head to cut tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpieces via head-through oiling. Technical specifications: Motor: 1.1 kW, single-phase, 50 Hz, induction type. Switches: Reverse / Off / Forward heavy-duty rotary switch and integrated foot pedal. Spindle speed: 36/12 RPM. Gearbox: Two-speed transmission with 3:1 ratio. Chuck: Hammer-type with replaceable inserts. Rear centering device: Cam-operated. Pipe cutter: Model 764, fully self-adjusting and self-centering, with 1⁄4″ – 4″ F-229 cutting wheel. Reamer: Model 744, bladed type, 1⁄4″ – 4″. Lubrication: Through the die head. Pump: Self-priming, gear-type, automatic reversing, with constant flow.

Condition: used, Year of construction: 1973, min./max. hole to grind 8 / 10 mm max. grinding depth by internal grinding 150 mm swing dia. 450 mm workpiece spindle bore 35 mm max. swivability 30 ° min/max. table longitudinal travel 5 / 150 mm/min Internal Grinding Machine | D14 - 1973 The machine is in a well-maintained condition. Please refer to further technical details in the attachement of the offer. Lhedpfxst Rlgus Ad Njb - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: D-14 | D 14

Year of construction: 1998, condition: excellent (used), Technical detils : - Capacity - 500 nails/ min. - Power - 7 kw - Wire range - 1,0 - 4,2 mm - Nails lenght - 30 - 150 mm Lhjdpfx Adjh Hp H Se Neb - Year - 1998

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 847/0021, center height: 1,180 mm, spindle speed (max.): 12,000 rpm, workpiece spindle speed (max.): 1,100 rpm, feed length X-axis: 350 mm, feed length Z-axis: 530 mm, Especially suitable for grinding operations, drilling, and flat surfaces for custom parts (e.g., various bevel gears) TECHNICAL DETAILS Center height: 1,180 mm Max. grinding flat surface: Ø 200 mm Max. grinding depth: 70 mm Closable bore: max. Ø 250 mm Max. distance front edge of workpiece spindle – grinding wheel mount: 250 mm Max. workpiece weight + clamping devices: 150 kg X-axis: 350 mm Z1-axis: 530 mm Controller: CNC Sinumerik 840 D Spindle Speeds Main spindle (stepless): up to 12,000 rpm Workpiece Spindle Speeds Workpiece spindle (stepless): up to 1,100 rpm Grinding Spindle Type: 170 EGV 12-20 T Tool mount: Ø 170 mm Screw thread: M36 x 2 Swivel range: 3° fixed position Workpiece Spindle Spindle head: similar to DIN 55026 / Z7 Type: A6 Spindle bore (without chuck): Ø 46 mm Cylinder correction: ± 5 min Axis Drives X1-axis (Siemens 1 FT6 062): 5.0 kW / 3.4 A / 3,000 rpm / IP 65 protection Z1-axis (Siemens 1 FT6 064): 7.9 kW / 5.2 A / 3,000 rpm / IP 65 protection S1-axis workpiece spindle (Siemens 1 FT6 084): 16.2 Nm / 11.3 A / 3,000 rpm / IP 65 protection Feed Rates X1-axis: 9,000 mm/min Z1-axis: 18,000 mm/min MACHINE DETAILS Space requirement: 7,800 x 5,200 x 3,400 mm Machine weight: 5,000 kg Drive Total connected load: 45 kVA Total power demand: 45 kVA Supply voltage: 400 V Frequency: 50 Hz Coolant requirements Coolant quantity (process cooling): 100 l/min Pressure: 2.0 bar Noise Level Sound level: 75 dB(A) Lsdpfowm H H Rox Ad Nehb EQUIPMENT - Linear portal (Felsomat) - Oval cycle buffer (EWAB) - Hydraulic unit according to DIN - Special chuck (Röhm) - Turbo dressing spindle (EFESIS) - Air cleaner D2000 (IFS)

Condition: refurbished (used), Year of construction: 2025, Studer S30 Center height: 125 mm center width: 650 mm Workpiece weight: 80 kg Other freely selectable options: - Completely new control cabinet with SPS-Basic and panel - Conversion to ball screw incl. SPS-Pro (cycle controlled) - "Workpiece memory"-SPS-PRO for 10/15/30/50 workpieces - Glass scale in X- and Z-axis - Swiveling internal grinding device - Motor spindle for internal grinding device - Frequency converter external grinding spindle - Frequency converter for internal grinding spindle - Grinding sensor system - Contact protection on external grinding spindle Lodpfx Ajd Hdxwed Nohb - Safety door - manually operated - Grinding wheel flange - LED spot with flex arm - suitable coolant system

Year of construction: 1999, condition: used, pulling force - max. 6,0 t Lsdpfx Aod Il A Ned Njhb max. ram stroke 1250 mm dimensions of the machine ca. 1,20 x 1,20 x 3,25 m