Internal threading machine

Easy Tap ETH 24

Condition: new, Hydraulic thread cutting machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread: M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Dodpfxjkhmgio Akvjkr Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic thread cutting machine Incl. machine base with clamping plate Mobile Hydraulic pressure gauge Stepless speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts: M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 750 mm, turning diameter: 590 mm, spindle bore: 78 mm, spindle speed (max.): 3,000 rpm, Equipment: documentation/manual, Centre distance: 750 mm Swing: 590 mm over bed / 375 mm over slides Spindle speeds: 25 - 3.000 rpm Spindle bore: 78 mm Revolver: 10 Platze Controller: Siemens 810D Shopmill Dkedpjxmvzuofx Akvor Featured with: - Double footpedals - Chipconveyor - Machine manuals Country of origin: Z. Korea Motor power: 25 kW Machine weight: 6.000 kg Machine LxWxH: 300 x 180 x 190 cm

Condition: good (used), Parts shown by hand not come. Dkodswb Eptepfx Akver Technical details shown on picture. Tools in wooden box will come with machine.

Condition: used, Year of construction: 1988, Technical details: turning diameter over bed: 360 mm Dsdpfeu Rqabox Akvekr turning dia. over face-slide: 160 mm turning length: 800 mm longitudinal traverse (z-axis): 810 mm facing movement (x-axis): 205 mm control: TX-8 spindle passage: 60 mm revolution per minute: 63 - 3150 / 2 step U/min feed:: 10.000 mm/min. tool turret - number of stations: 8 operating hours - idle run: 8834 h tailstock taper ISO: SK30 DIN 2080 tailstock quill stroke: 105 mm operating pressure: 40 bar total power requirement: 38 kW Weight approx.: 3,1 t dimension machine xH: 1,8 x 3,3 x 1,8 m dimensions of hydaulic: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Accessories Fine adjustment device for tool set-up *

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw Dkjdpfjqwlmqox Akver mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: ready for operation (used), Year of construction: 2017, operating hours: 24,140 h, overall weight: 10,000 kg, controller manufacturer: FANUC, controller model: 31i-NT-SmartX, number of axes: 9, This 9-axis Nakamura NTJ100 turn-mill centre was manufactured in 2017, featuring a bar capacity up to 65 mm and dual spindles with maximum speeds of 4500 and 5000 rpm respectively. It includes a Samsys bar loader, Absolent extraction system, and a variety of automated features such as coolant supply through the spindle, parts catcher, and automatic tool setting devices. Consider the opportunity to buy this Nakamura NTJ100 turn-mill centre. Contact us for more information about this machine. • Increased bar capacity: 65 mm left, 51 mm right • Workpiece measurement: han-bei measuring probe for automatic workpiece measurement (infrared or radio type) for left and right spindle • Left + right, with auto swing-in type and 2x 4 measuring directions for quick and precise tool setting via the nc function. • Operating time 43399h Dkjdpfxsx D Iuzs Akvjr • Coolant system: coolant through spindle (CTS); coolant float switch for machine stop on low level; additional coolant flushing via the spindle (left and right) • Bar capacity: Ø 51 mm • Parts catcher type A with collecting tray, max. Ø 65 x 150 mm, 3.0 kg, spindle side, left, with plastic lining • Chuck blow-out device for left spindle • Automatic power shut-off • Preparation for oil mist extraction system with connection nozzle Ø 150 mm • Robot/automation prep: pneumatic flap for robot handling on top of the door, opening approx. 400 x 400 mm • Handwheel for manual tracking of defined contours • Data server with 1 GB ATA memory card • Interface for KNOLL system • Triple signal lightSamsys bar loader with a 1.5 m bar loading capacity has the following dimensions: Length: 225 cm + 43 cm intermediate guide Width: 120 cm (including loading ramp and control panel) Height: 145 cm or 180 cm with the flap openThe machine was mainly used to process aluminium (95%). Additional equipment • Samsys bar loader, including extension • Absolent extraction system • Slat-belt chip conveyor with interface, time-interval control, and alarm evaluation

Condition: new, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 24 mm, Model RE16 to M16, model RE24 to M24 - ball bearing mounted wear-free parallel arm with radii of 1270 or 1800mm - Connection 230V / 1Ph - Infinitely variable speed adjustment - Digital speed display Djdpfxorb Akme Akvskr - digital depth control with memory for 5 programs - quick-change holder according to DIN standard Options: Micro spray system for model 1800 Cast iron table Wheels for cast iron table Multifunctional head for cutting at any angle

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 17004A, bar diameter (max.): 20 mm, For sale: two fully operational Tsugami HS20M 5-axis machines. Everything is in working condition, recently serviced and technically inspected. Included: various tool holders, full technical documentation. These machines were primarily used for manufacturing dental implants and were sourced from Sweden. If interested, please contact me for further details, photos, pricing, or to arrange an inspection. Dksdoyghcrspfx Akvsr

Condition: good (used), Parts shown by hand not come. Technical data shown on picture. Tools in wooden box will come with machine. Dkodpowb Em Ssfx Akvor

Condition: ready for operation (used), Year of construction: 1991, machine/vehicle number: MS 25E19111, Number of spindles: 6 Spindle bore: 27 mm Turning length: 59 mm Hexagonal material: 24 mm Square material: 18 mm Cross slide travel: 36 mm Longitudinal slide travel: 85 mm Spindle speeds: 366 - 5020 rpm Torque: 95 Nm Control: INDEX Total power requirement: 20 kW - 6 cross slides Djdev Raatepfx Akvjkr - 6 longitudinal slides - Multi-edge device - Thread cutting device - Hydraulic pick-up device - Workpiece conveyor belt - Bar loading magazine, IEMCA, type PRA 40/35/P