Used Injection Moulder for sale (2,515)

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Hjdpozt I Srjfx Ahgot Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Year of construction: 2012, input voltage: 400 V, conveyor belt width: 850 mm, total width: 1,650 mm, total length: 8,100 mm, total height: 2,050 mm, For sale: Very well-maintained Midrange Croissant machine from Rademaker Hsdpfx Ajxzt Rijhgot Brand: Rademaker Included: - Mould unit - V Moulder - Conveyor - Midrange Croissant machine Year of manufacture: 2012 Conveyor belts year: 2017 Documentation / electrical diagrams available Full pallet with spare parts Operating hours: 9,153 hours Capacity: approx. 7,200 pieces per hour Belt width: 850 mm It is possible to inspect the machine at our location. If you have any questions or comments, please feel free to contact us. Transport by arrangement. Kind regards, Leo Holland

Condition: good (used), Year of construction: 2000, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, Basic data Clamping force: 160 t Year of manufacture: 2000 Control system: Selogica Injection weight: 154.7 g Injection unit .../675 Hsdpfx Aozt Ikbehget Screw diameter: 35 mm Injection volume: 170 cm³ Injection weight: 154.7 g Mold clamping unit 160/... Clamping force: 160 t Mold plate dimensions: 728 × 728 mm Distance between columns: 520 × 520 mm Mold height: 250 mm Opening stroke: 650 mm Maximum mold plate distance: 900 mm Ejector force: 50 kN Ejector stroke: 175 mm

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Hedpfezt I Rnjx Ahgot Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector

Condition: used, Year of construction: 2018, clamping force: 500 kN, screw diameter: 27 mm, clearance between the columns: 360 mm, mold height (min.): 210 mm, ejector stroke: 70 mm, opening stroke: 600 mm, plate width: 500 mm, plate height: 470 mm, Equipment: documentation/manual, For sale is a used FANUC ROBOSHOT Alpha S50iA, manufactured in 2018. This compact injection molding machine is offered based on the current technical description and the attached machine photographs. Technical specifications: - Year of manufacture: 2018 - Clamping force: 500/650 kN - Screw diameter: 27 mm - Theoretical cylinder volume: 50 cm³ - Column spacing horizontal/vertical: 360 x 320 mm - Platen size: 500 x 470 mm - Mold height: 210 to 460 mm - Maximum opening stroke: 600 mm - Maximum ejector stroke: 70 mm - Core circle diameter: 125 mm - Hydraulic cores: 0 - Pneumatic circuits: 2 - Connected power: 30 kW Equipment and options: - Power transformer AC 400 V to AC 200 V - Air ejector, 3 circuits - Short shot detection - Euromap 67 - USB interface - Parallel tool movement / dosing - Parallel tool movement / ejector - Pre-injection function - Precision dosing function - Backflow measurement at the screw check valve - Nozzle with shut-off function, software - Hot runner valve control, 8 circuits (software) - Communication with temperature controllers (software) - Intelligent tool protection - Intelligent ejector protection - Tool set Hodozwhdiopfx Ahgst - Safety set - 21 freely programmable inputs/outputs - 2 analog inputs 0-10 V DC - Alarm column with audible signal - Czech operating manual Optional services available upon request: The following services can be offered upon request and are not included in the machine scope: - 1-day operator training at the customer's site - Commissioning - Automatic clamping force correction during operation Operating hours, control system, ejector force, injection speed, injection pressure, screw/cylinder design, and robot interface are not specified. The machine is offered used and in its current condition. Technical specifications and scope of supply are to be confirmed before the contract is concluded. The written confirmed scope of supply shall prevail. Inspection and further information are available upon request.

Condition: excellent (used), Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, clamping force: 3,200 kN, screw diameter: 65 mm, clearance between the columns: 680 mm, displacement volume: 929 cm³, injection pressure: 2,130 bar, injection weight: 845 g, ejector force: 62,000 N, ejector stroke: 160 mm, plate length: 680 mm, plate height: 680 mm, total length: 7,010 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 13,500 kg, type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, The Haitian Mars Series MA3200 (available in generations II and III, as well as an Eco variant) is a servo-hydraulic injection molding machine with a clamping force of 3200 kN (320 US tons). The machine was in operation at an R&D test center in Israel for quality control purposes. The machine operated without any issues until it was deactivated in June 2026. Hsdpfx Ahezww D Ssgot You can find an exact specification in the documents. Delivery terms: EXW Israel – Zeelim, unpacked on the ground, transport and packaging at the buyer's expense.

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 119291, planing height: 160 mm, planing width: 260 mm, We are offering this well-maintained Weinig Powermat 600 planing and rabbeting machine, manufactured in 2014. Hjdpfx Aszltp Tohgjt Manufacturer: Weinig Model: Powermat 600 Year of manufacture: 2014 Condition: good Machine type: Planing and rabbeting machine Zuani/Kanefusa tools for molding, window and door frame production (original price EUR 18,000) are included. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Hsdpfx Ahjzt Ih Toget Control: NC4

Condition: used, Year of construction: 2010, operating hours: 80,000 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 560 mm, displacement volume: 442 cm³, injection pressure: 1,946 bar, mold height (min.): 660 mm, ejector force: 69 N, ejector stroke: 180 mm, total length: 5,700 mm, total width: 1,700 mm, total height: 2,200 mm, overall weight: 10,950 kg, The machine is currently in production, but it will need to be relocated soon as it is being replaced. Hodezub Ntspfx Ahgjt

Condition: excellent (used), Year of construction: 2009, clamping force: 3,000 kN, screw diameter: 65 mm, clearance between the columns: 710 mm, injection pressure: 2,070 bar, injection weight: 981 g, mold height (min.): 225 mm, Clamping Unit • Clamping force: 3000 kN (300 t) • Distance between columns: 710 x 710 mm – special design, increased distance compared to the standard version • Mold height: min. 225 mm / max. 1125 mm • Opening stroke: 900 mm • Maximum distance between mounting plates: 1125 mm • Mounting plate size: 1030 x 1020 mm (920 mm) • Special hole pattern in the clamping plate and nozzle plate – made to order • Manual device for removing the upper column, with a removable cover in the front guard and a wrench for the column nut Injection Unit • Injection unit 2250 • Screw diameter: 65 mm, L/D ratio 22.0 • Shot volume: 1078 cm3 • Maximum injection weight (PS): 981 g • Specific injection pressure: 2070 bar • Equipment package: wear and corrosion-resistant plasticizing unit, adapted for processing PP and PPSU, diameter 65 mm • Hart-PVC package: without internal screw cooling, with external cylinder cooling instead of standard design • High-temperature heating bands for a working temperature of 450 °C • 8 standard open nozzles, plus: 4 for the PVC cylinder and 4 for the PP cylinder, through holes 4, 8, 10, and 12 mm • Wrench for screw tip for a 65 mm diameter UNILOG B6S Control System - Upgrade package • Controller with increased computing power • APS and cycle time analysis • Four freely configurable network connections • Userpage and notepad • Real-value graphics with 16 curves • Event log depth: 10,000 events • Quality table memory depth: 10,000 events • Four envelope curves, foil function keys • SPC evaluation and trend charts • Injection, holding, and back pressure controlled by a servo valve Hydraulics and Hydraulic Cores • Core movement and parallel ejection are performed by an additional DFEE pump, size 71, flow rate 95 l/min • 4 x hydraulic core for the clamping plate NW 10 (on/off valve), interfaces according to EUROMAP 13, with active ejector plate protection • Cores mounted on the upper side of the clamping plates, each with connections for two consumers • 2 x core junction box in a special design: 25 3-pole Amphenol plugs, mounted on the clamping plate on the operator side and the rear side, connected in series • 4 x core pressure relief upon emergency shutdown, engine stop, and after pressing the button in setting mode – relief occurs simultaneously for cores on the clamping side and the nozzle side • 4 x twin check valve for NW 10 core • 2 x pneumatic valve for controlling one closing nozzle in the mold or several in parallel (1000 l/min), mounted in the center console at the rear of the machine Mold Heating, Electrical System, and Connections Hsdpozxfg Rjfx Ahgst • 12 x temperature control circuit for hot runner or mold heating, power 2.3 kW, 10 A, interface according to HASCO standard (1 x HASCO 24-pole for max. 6 zones) • Mounting location for heating circuits: center console at the rear, near the control cabinet • 2 x Schuko 16 A socket: under the control system and on the clamping side from the rear, under a cover • 2 x CEE 16 A socket: on the injection side from the front and on the clamping side • Dual power supply: 1. power supply 3P+N, 400 V, rated current 140 A, preliminary protection gL-gG 160 A • 2. power supply 3P, 400 V, rated current 98 A, preliminary protection gL-gG 100 A

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 92805, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm Working height 8 - 120 mm 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 5,5 kW / left + right 5.5 kW / top 5.5 kW / bottom finishing 5.5 kW Spindle speed 6000 rpm Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min lubricant pump mechanical digital displays Year of manufacture 2001 Dimensions 3400 x 1800 x 1900 mm (L x W x H), weight 2500 kg Hedjynl N Sjpfx Ahgjt

Condition: excellent (used), Year of construction: 2010, ARBURG 370 U 600-290 injection molding machine Year of manufacture: 2010 Clamping unit Hedpfjzw Azvsx Ahgot Clamping force: 600 kN (60 tons) Distance between tie bars (H × V): 370 × 370 mm Dimensions of mounting platens (H × V): 510 × 510 mm Minimum mold height: 200 mm Maximum daylight opening: 600 mm Opening stroke: 400 mm Ejector stroke: 125 mm Ejector force: 30 kN Injection unit Screw diameter: 35 mm Injection volume: 144 cm³ Injection shot weight (PS): 132 g Maximum injection pressure: 2000 bar Screw L/D ratio: 20 Screw torque: 450 Nm Maximum injection speed (PS): 140 g/s Number of heating zones: 4 Nozzle stroke: 240 mm Dimensions and weight Machine dimensions (L × W × H): 3.80 × 1.45 × 2.12 m Total weight: approx. 3,500 kg

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 17659, total length: 11,000 mm, total width: 3,000 mm, total height: 2,600 mm, overall weight: 40,000 kg, Includes handling equipment, peripherals, and conveyor belt. A used machine is being sold as part of a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end. Hjdpfxszrd Slj Ahgot

Condition: used, Year of construction: 2005, Manufacturer: KRAUSS MAFFEI, Type: 1600-8100-1400MX, Year of manufacture: 2005, Serial No. 61007140, Control system: Krauss Maffei MC5, Clamping force: 1,600 t, 2 injection units, Minimum/maximum mold height: 700/1,600 mm, Platen spacing: 3,400 mm, Clear opening horizontal/vertical: 1,850/1,400 mm, 12 cascades, 48 hot runner nozzles, Core pulls hydr. 5 (DS) 5 (AS), Screw diameter: 105/60 mm, Injection weight: 4,100/600 g, Part removal robot, Manufacturer: Krauss Maffei, Belt conveyor, approx. 5,000 x 1,400 mm Hjdpozn Aqfjfx Ahget +++ Attention: Machine is part of an online auction! +++

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, clamping force: 27,000 kN, screw diameter: 60 mm, clearance between the columns: 630,570 mm, injection weight: 760 g, MACHINE IN PERFECT CONDITION, AVAILABLE FOR ANY INSPECTION. Hodpjzw D Eisfx Ahget

Condition: good (used), Year of construction: 2010, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, actuation type: electric, table length: 205 mm, Equipment: CE marking, rotational speed infinitely variable, We are selling a professional and immediately ready-to-use workshop set from the Austrian premium manufacturer Felder. The set consists of the precise panel saw K 700 (year of manufacture 2010) and the matching mobile dust extraction unit AF 14. Both machines are in a well-maintained, fully functional condition and have operated flawlessly in a professional workshop environment until recently. Perfect for carpentry shops, interior design, or ambitious woodworkers who are looking for a complete solution. 1. Felder K 700 panel saw: Motor power: 5.5 kW (powerful S6-40% version) Voltage / Frequency: 400 V / 50 Hz (three-phase) Features: Smooth-running aluminum sliding table, large extension table with retractable guide rail and folding stop, solid parallel fence on round bar guide with fine adjustment, workpiece clamping device (eccentric clamp). 2. Felder AF 14 mobile dust extraction unit (included): Model: Felder AF 14 (movable on rollers) Power: Powerful motor with robust steel fan wheel Airflow: Max. 2,350 m³/h for excellent chip extraction Convenience: Practical quick-change system for chip bags Accessories: Includes flexible extraction hose (as shown) for direct connection to the panel saw. The system is completely coordinated – connect it and start working dust-free immediately! The machines can be viewed on-site and tested while powered up after prior arrangement. Hedpszrl A Eofx Ahget

Condition: good (used), Year of construction: 1991, functionality: unexamined, machine/vehicle number: 226 500123, Weinig four-sided planer in good, used condition. Quattromat 22 – Year of manufacture 1991 Accessories: 4 planing heads The planing machine was used for many years in solid wood production. The machine is being sold as part of the liquidation of our carpentry business. Hodpfxsziu I Ej Ahgst Collection price – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: used, Year of construction: 1996, functionality: unexamined, ARBURG 221 M 250-55 injection molding machine. Clamping force: 250 kN. Year of manufacture: 1996. Complete with its two control cabinets (without display screen). It is sold in its current condition and is available for immediate removal, unless it is sold in the meantime. You are welcome to visit and inspect the machine at our warehouse. We are open from 9:00 AM to 4:30 PM every day from Monday to Friday. Address: 11/14 Avenue Marcelin Berthelot, 92390 Villeneuve-la-Garenne, France. Hedpfx Ahsztgpcegot Price: €1000, loaded onto your truck. Please feel free to call if you require further information.

Condition: used, Year of construction: 2016, Manufacturer: KRAUSS MAFFEI, Type: KM 850-6100/1400 MXZ Blue Power, Year of manufacture: 2016, Serial number: 61024868, Control system: Krauss Maffei MC5, Clamping force: 850 t, 2 injection units, Rotary table, Installation height min./max. 500/960 mm, Daylight opening 1,120 mm, 48 hot runner nozzles, hydraulic core pull systems 2 (DS) 3 (AS), Screw diameter 95/60 mm, Shot weight 3,200/500 g, Parts removal robot, Manufacturer: Krauss Maffei, Type LRX350, Year of manufacture: 2016, Serial number: 2114889, Conveyor belt, 3,000 x 800 mm 37,544 hours (25,846 net production hours) Hodpfxezn Ap Ie Ahget Note: Machine is part of an online auction!

Condition: not inspected (used), functionality: unexamined, workpiece height (max.): 160 mm, workpiece width (max.): 230 mm, Working width: 20 – 230 mm Working height: 8 – 160 mm 7-spindle configuration Feed rate infinitely adjustable: 6 – 36 m/min Spindle motors with 7.5 kW, 11 kW and 18.5 kW power Mechanical brakes on the motors Electrical adjustment options for spindles and feed rate Hardened table insert in front of the first lower spindle Pressure pads and guides for precise workpiece guidance High-quality ball bearings and robust industrial design Spindle arrangement: Lower horizontal spindle 7.5 kW Right vertical spindle 7.5 kW Left vertical spindle 11 kW Right vertical spindle 7.5 kW Hodpjzt Hf Dsfx Ahgot Upper horizontal spindle 18.5 kW Lower horizontal spindle 7.5 kW Universal spindle 7.5 kW

Condition: excellent (used), Year of construction: 2015, Weinig Powermat (Hydromat) 2400 moulder with 7 Spindles. (Year 2015) Working height: 10 - 160 mm . Working width: 20 - 230 mm. 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Hodpfxszwfwtj Ahget Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor, 60m/min. Heavy duty feed works. 10x top feed rollers. First top feed roller with clutch installed for use with mechanisation. 5x bottom feed rollers. Automatic lubrication system. Electric digital display memory system. CNC POSITIONING ON SPINDLES 3, 5 & 8 Possible to supply with Weinig moulder infeed and outfeed

Condition: excellent (used), Year of construction: 2015, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 820 mm, injection pressure: 1,212 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Clamping force: 420 t Year of manufacture: 2015 Injection shot volume: 1,100 g Injection unit: 2300 Screw diameter: 70 mm Specific injection pressure: 1877 bar Injection volume: 1212 cc Injection shot volume: 1,100 g Hodozwdzkspfx Ahgot Pump motor power: 51 kW Cylinder heater power: 27 kW Screw L/D ratio: 20 Clamping force: 420 t Tool plate dimensions: 1200 x 1200 mm Distance between tie bars: 820 x 820 mm Ejector force: 96 kN Tool height: 380 - 825 mm Opening stroke: 770 mm Maximum platen distance: 1595 mm Ejector stroke: 230 mm Oil tank capacity: 78 kW Weight: 21000 kg Dimensions (m) L x W x H: 8.02 x 2.21 x 2.57 m Year of manufacture: 2015 Control system: NC5 Equipment: - Hydraulic core pull: 4 (+ 2 additional connections on the fixed platen) - Hydraulic cascades: 4 - Hot runner adjustment points (zones): 40 - Servo-drive hydraulic pump activeDrive (energy-saving) - Adjustable p+v injection in a closed-loop system - Wear-resistant screw, bimetallic cylinder - Automatic mold height adjustment - Clamping force adjustment - activeProtect mold protection - Switchover to pressure-based clamping (WID) - PDE process data logging, 100% monitoring - 8-circuit cooling water regulator - EUROMAP 67 interface - World Connect - remote service - DR 832 CNC robot and safety fencing included

Condition: excellent (used), Year of construction: 2010, clamping force: 1,000 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, injection pressure: 1,580 bar, injection weight: 232 g, mold height (min.): 250 mm, Clamping unit • Clamping force 1000 kN (100 t) • Set of mounting plates, central mounting, 125 mm bore • Electromechanical ejector • Quick-release coupling for the ejector • Connection safeguard for the ejector plates • Programmable mold height adjustment from the operator panel • Top-open guard with a drop-down window for the parts removal device Injection unit • Complete 45 mm screw with high wear resistance Hsdezxg Txepfx Ahgst • Open nozzle 45 mm, nozzle tip with a 15 mm radius, heating band for open nozzle • Nozzle clamping force adjustable and programmable • AED - electromechanical dosing drive • aXw Control ScrewPilot Drive system - HIDRIVE hybrid • H series: hybrid concept combining electric drives with accumulator hydraulics • Drive unit with 11 kW motor, 21.4 l/min charging capacity • Technology level: accumulator drive – fast movements with low power consumption • Continuous oil cooling and filtration • Hydraulic accumulator tested during start-up Control system • Selogica direct with touchscreen • Complete set of six software packages: extended monitoring, extended movements, production control, optimization and operator assistance, quality assurance, documentation • Printer interface, serial USB • CompactFlash interface for saving data sets • Operator authorization via chip card according to EUROMAP 65 Hydraulic cores • Core 1 – simultaneous movement, P/Q regulation, programmable • Core 2 – simultaneous movement, P/Q regulation, programmable • Both circuits are fully integrated with the Selogica cycle sequence and controlled directly from the panel • Note regarding connections: the machine was delivered from the factory without standard quick-release couplings for the core circuits. Stäubli SBA 08.7103/JV/PA couplings/nipples with a G1/2 connection thread are required.

Condition: excellent (used), Catalogue number 7784 TECHNICAL DATA - Spindle diameter: 30 mm - Working height of spindle: 150 mm - Interchangeable spindle - Spindle locking - Adjustable up/down + angle - Original cast iron fence with full adjustment Hjdpfozwwd Eex Ahgst - 4 spindle speeds + left/right: 3000/5000/6000/10000 rpm - Table dimensions: 1120x800 mm - Motor: 3.7 kW - Dimensions (L/W/H): 1100x1400x1160 mm - Weight: 775 kg ADVANTAGES – German-made – Used milling machine – Very good condition Net price: 6,900 PLN Net price: 1,640 EUR Net price calculated at a rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Factory new – never installed! Weinig Hydromat 4300, high speed planer and moulder Feed speed 30-300 m/min Hjdozu Awropfx Ahgst Spindle 1 (Bottom) – Radial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 2 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer, fully automatic Spindle 3 (Right): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 4 (Left): – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic Spindle 5 (Top): – Radial and axial CNC-controlled adjustment – Hydro bearing with automatic locking – Straight jointer + profile jointer fully automatic Spindle 6 (Bottom): – Table tops with wood inserts, maximum cutting height of 65 mm with a flange of 100 mm – Rotaplan pressure plate above the bottom shaft – Radial and axial CNC-controlled adjustment – Straight jointer, fully automatic – Hydro bearing with automatic locking General: – Horizontal CNC-controlled pressure rollers – CNC-controlled positioning input – Marathon Powercoating Plus – Automatic waxilit pump – Weinig WMC with touchscreen – Kickback protection for sawing operations – Machine with spindle and feed brakes – Safety and sound insulation housing