Used Halls for sale (325)

Condition: used, Year of construction: 1998, operating hours: 4,500 h, Used Filling Machine Elopak PURE PAK PS 20 Capacity: 2.000 briks/h Year of production: 1998 Cartons: 0,25 – 0,5 – 1,0 without cap ( no applicator) Working hours: 4.500 Shelf life of milk 3 days, yogurt 15-20 days The equipment is correct, disconected 4 years ago It is located in the production hall, but is not connected to the pipeline It is for sale as-is Bsdjvguzqspfx Ab Todk Technical documentation in English

Condition: good (used), Year of construction: 1987, Motorized folding machine Fab. FASTI Typ. 213-20-10 year 1987 Technical data Make: Fasti Type: 213-20-10 Year of construction: 1987 Effective length: 2040 mm Sheet thickness: 10 mm Stroke upper beam: 500 mm Bedpfx Aoum Ttzob Tjdk Lower beam stroke: 80 mm Dimensions: approx. L 4.40 x W 2.00 x H 2.40 m Weight: approx. 8 tons Equipment - Central lubrication - Bending beam drive on both sides - Potentiometer with digi-display for bending angle - Bending rail 35 mm - Focusing rail 45° All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: new, weight max. in kg 250 kg arm length 4000 mm height 3425 Unterkante Ausleger total column height 4.025 mm swivelling range 270 Grad Total weight, approx. 375 kg Description: - Load capacity 250 kg - projection 4000 mm - Construction height 4025 mm - Crane lacquer in color RAL 1007 daffodil yellow - Calculation basis DIN 15018 - Crane classification H2 / B2 - Operating location hall operation - Size / bracket profile LS36 / FormC 110x90 - Height of the lower edge of the boom 3425 mm - Operating voltage 3 / PE ~ 50 Hz 400 V - Direct control type of control - Degree of protection IP55 - Swivel range, nominally 270 ° - Panning by hand including: Bedpfxoxak D Rs Ab Tsdk - Anchor rods size LS 36 - Consists of 8 pieces M24 mm x 800 mm, with 1 steel template (420/8) for - Fastening to the foundation, including accessories Electric chain hoist: - Chain hoist type GM 2 250.6-1, 1-leg - painted in color RAL 5017 - traffic blue - Load capacity 250 kg - hook path 4000 mm - highest hook position 3034 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.5 / 6 m / min - Lifting power 0.09 / 0.35 kW - duty cycle 60% ED Fig. Shows a similar crane system

Condition: refurbished (used), Year of construction: 2007, operating hours: 400 h, functionality: limited functionality, machine/vehicle number: 256777, saw blade diameter: 370 mm, cutting height (max.): 120 mm, feed rate X-axis: 250 m/min, total length: 10,800 mm, total height: 1,600 mm, total width: 2,700 mm, overall weight: 4,000 kg, type of input current: three-phase, input voltage: 400 V, cutting length (max.): 3,050 mm, High-performance circular saw - PEDRAZZOLI brand Year 2022: FULLY REFURBISHED by ORIGINAL PEDRAZZOLI New bearings, hydraulics, covers, 100% precision Bsdpfxsxd T T As Ab Tsdk Approximately 400 machine hours since refurbishment. For tubes and profiles with diameter: 12 - 122 mm Profiles: 12 - 95 mm Length: 25 mm - 3050 mm Bundle loader 6.5 m / max. 4 tons Machine can be powered up again (for inspection) Assistance available for loading outside the hall and onto truck. We are NOT machinery dealers.

Condition: used, Year of construction: 2021, machine/vehicle number: HB 2022-A-073, Portal straightening press with 300 T capacity a) idle and pressing speed up to 17 mm/sec. b) opening speed up to 55 mm/sec c) table size 2500x1600mm d) open height 700 mm e) total size approx. LBH 4500 x 2300 x 3700 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) table in grid construction,with T grooves according to customer's request, otherwise 22mm i) operation on swivel arm, mounted on the bridge j) pressure adjustment from 50 T to 300 T via MONITOR k) bridge moves by two gear motors, via racks l) Cylinder moves to the left and to the right via toothed racks m) Machine body double painted n) Cylinder induction hardened Type of construction Press design PORTAL PRESS Thermally neutral 80 - 120 °C Number of operating sides 3 side Forces Pressing force max. 3,000 kN Free ripping force max. 500 kN Pressure build-up time Closed die Steel to steel Max. 3 sec. Dimensions Max. Opening width 700 mm Stroke and min. opening 700 mm/ 0 mm Table height above floor approx. 9ß0 mm Height above floor (headroom) approx. 3700 mm Hall height min. 5.000 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.8 mm/m Weight Total weight of press without operating materials and table plate approx. 22 T Speeds Fast closing with 17 mm sec. Pressing speed 8 mm sec. Bdedpfx Abeh Agnuj Tek Opening 55 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel after max. 78 db(A) DIN 45635-T16-KL3 Hydraulics Number of pressing cylinders 1 pc. Operating pressure max. 350 bar Pressing pressure build-up time 02. mz sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH approx. 93 L/min Oil volume approx. HLPD 46 MW 900 liters Ambient temperature max. 45 °C Oil temperature max. 55 °C Electrical system Main supply 400 V AC Control voltage 24 V DC Frequency 50 Hz Hydraulic connection Main motor IE3 22 kW Total connection Approx. 30 kW

Condition: new, Year of construction: 2025, Product characteristics The plasma burner or oxygen-gas CNC1 burner is a mobile device designed for cutting shapes out of a metal sheet. The machine does not require anchoring, thus reducing the assembly time considerably. Additionally, it enables for placing the machine in any location within the hall without any new expenses. The machine is equipped with an excellent quality wheel system that together with the low weight portal makes the plotter one of the fastest machines available on the market. The machine can be used for manual and automatic cutting. It is equipped with a digital controller that enables cutting out complicated shapes. The machine proves itself very well in the shipbuilding, machine-building and power industry. CNC1 has been equipped with a precise system of X/Y axes guides. The burner is controlled by Sino-USA electronic production system that is characterized by a high precision and elimination of the errors occurring during operation. The machine is very easy to configure. A manual configuration is possible for simple shapes and automatic configuration is possible for more complicated figures. The cutting pattern and the burner motion are shown on a display. An original FastCAM software is attached to the machine for easy configuration. The software is in English which makes the work easier. FastCAM is a technological CAD/CAM program, which is intended for designing and defining cutting paths of the elements cut out by CNC burning machines. The program shall be installed on an office PC or on a portable computer. After defining the way of cutting the operator receives a ready control code, which should be transferred to the control system of the machine. FastCAM program is a standard element of our machines. BASIC INFORMATION User-friendly interface – easy operation, even for people without prior experience of working with such programs as FastCAM Import of drawings in the *.txt format from any programs similar to e.g. AutoCAD, SolidWorks etc. MAKRO – a library containing standard shapes enables creating figures without the necessity of drawing them in CAD system. The program provides 2D figures NESTING – an optimal usage of sheet metal thanks to the automatic arrangement of elements on a sheet DEMO – shows a working path without having to turn on the plasma source or oxygen VOLTAGE HEIGHT CONTROLLER The machine is equipped with THC (a voltage control of the plasma burner blowtorch height). A precise control (+/- 0.1 mm) of the plasma blowtorch distance from a sheet metal during cutting. Higher accuracy and absence of defects which capacitive sensors and roller disks have. The parameters of the controller are collected automatically from the Automatic Cutting Parameters Selection table. Technical data Power supply 230 V LCD 7" color Code format G-Code Working dimensions Bdodpfovxhwvjx Ab Tjk 1500×3000 mm Cutting speed 50–3000 mm/min Illustrations are preview only, the device is sold without the table. Manufacturer: Cormak

Condition: used, mileage: 1,001 km, power: 131 kW (178.11 HP), first registration: 11/1964, overall weight: 15,600 kg, fuel type: diesel, color: green, axle configuration: 6x6, maximum load weight: 6,200 kg, empty load weight: 9,400 kg, tire size: 12.00R20 16PR, wheelbase: 3,800 mm, driver cabin: other, gearing type: mechanical, suspension: steel, total length: 2,500 mm, total width: 3,100 mm, number of seats: 3, Equipment: all wheel drive, cable winch, crane, differential lock, Vehicle location: Bovenden. Double passenger bench, 6-speed manual transmission, differential lock, rotating beacon, leaf suspension, rear-mounted crane, 1x hydraulic extension, four hydraulic extensions, winch. Wheelbase: 3,800 mm Body: Classic vehicle, Wilhag Autocrane TW931 A, 5.5t lifting capacity (August Bilstein), Magirus Jupiter 178 D 15 A 6x6 (5.5t 6x6 cross-country vehicle, type TW 931 A) First registration: 30.11.1964 Bedow I S Inopfx Ab Tjdk 8-cylinder multi-fuel engine 178 HP 12,677 cm³ displacement Unladen weight: 9,400 kg Permissible total weight: 15,600 kg 5.5t Wilhag recovery crane 8t front-mounted winch Non-synchronized gearbox Approx. 2,088 crane operating hours The vehicle was always stored indoors in a dry hall and, after being deregistered and changing owners in 2021, was regularly driven with temporary red license plates. Engine and transmission both run perfectly. Winch (as new) and crane are fully functional and were also regularly used on our company premises. Aside from some rust on the rear left of the cab (driver’s side) and signs of aging on several tires, the Jupiter is in good condition overall. All TDVs are available (operating manuals, repair instructions, spare parts lists, maintenance/inspection booklets, etc.). The crane and towing accessories are complete. ACCESSORY DETAILS WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: excellent (used), Year of construction: 1998, pressing force: 125 t, Hydraulic press brake Fab. EHT Typ. VARIOPRESS 125-3550 Year 1998 Technical data Make: EHT Type: Variopress 125-3550 Year of construction: 1998 Capacity: 125 t Effective length: 3550 mm Machine column: 2550 mm Bdodpfx Aber Epr Uo Tjk Projection: 300 mm Stroke: 240 mm Installation height: 640 mm Oil volume 250 L Dimensions: approx. L 3.90 x W 1.80 x H 3.00 m Weight: approx. 12 t Equipment - Control system: Cybelec DNC 80 2D graphics - Automatic upper tool clamping - Lower tool clamping 90mm and 13mm - controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 - motorized crowning - 6 x V block die length 3,500, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° - Punch straight, H 350mm / approx. 70°, length 3060 mm, segmented All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Bdjdpoxdantjfx Ab Tek

Condition: excellent (used), Offered is a used steel hall: steel, hot-dip galvanized, monopitch roof, trapezoidal sheet and doors. Dimensions: 25.55 m (length) x 5.56 m (width). Height at front: 3.43 m, height at rear: 3.13 m. Roof overhang at rear: 1.30 m. Door dimensions: 3.04 m x 2.49 m. Very good condition. The hall is assembled. Sale without dismantling. Bdsdpfjxcwtqox Ab Tjk

Condition: as good as new (ex-display), Year of construction: 2020, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm Bdsdpfog Iihwjx Ab Tok g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: new, Year of construction: 2025, Our lever up to 3000 kg is an irreplaceable tool in every warehouse, workshop or production hall, where solidity and reliability are important. The lever is made of the highest quality steel, which guarantees its durability and resistance to mechanical damage. The solid frame ensures stability when lifting, minimizing the risk of accidents and damage to the items being moved. The lifting height of the bar is 90 mm. The transport lever with a capacity of 3,000 kg is the ideal solution for carrying a variety of loads in various work environments. It is perfect for both small workshops and large warehouses or production plants. Maximum load capacity of 3000 kg, durable steel construction, transport wheels for easy movement, ergonomic and comfortable handle and versatile use make our lever an irreplaceable tool for lifting and moving heavy loads. If you are looking for a reliable tool for lifting and moving heavy loads, our transport lever with a capacity of 3,000 kg will meet your expectations. Choose a proven solution that will increase the efficiency of your work and ensure safe use. Please contact us and purchase our transport lever. We guarantee the highest quality and satisfaction with the use of our product. Product characteristics: Total length: 1400 mm Pipe diameter: 38x3 mm Bedpfx Aevxq Nhob Tedk Nose plate thickness: 11 mm, tapers at the end Nose plate width: 65 mm Load capacity: 3000 kg Total weight: approximately 8 kg. Manufacturer: Cormak

Condition: good (used), Year of construction: 2012, functionality: fully functional, BRIQUETTING and PELLETING technology: Machine type: BS70 Briquetting equipment The BS70 type BRIQUETTING PRESS equipment can be versatilely used for the processing of naturally renewable raw materials for the production of new, processed commercial goods. The equipment is used for processing and pressing materials such as straw, legumes, hay, paper, wood and other natural materials and their mixtures. Bodpfx Aboubb Ube Tedk The manufacturer designs the equipment according to the product to be processed. The moisture content of the raw materials to be processed is max. 10-12% and must not contain foreign matter (metal, gravel, sand, etc.). Pressing takes place without the addition of any additives or binders, only as a result of pressing, during which (depending on the base material) a density of over 1 kg/dm3 can be achieved. The resulting end product is automatically placed in the storage bags without manual handling, suitable for continuous operation. This can be ensured with 4 briquette presses (briquette diameter 70 mm) and 1 pelletizing machine (pellet diameter 6 mm), which can be installed in a 15x20x6.3 meter hall. The equipment is suitable for 16 hours of work per day, with 2 x 7 hours of continuous operation within that. The system consists of the following units: KSD900 Straw Grinder (2 Pcs): AVSZ70 Automatic control for material preparation (2 Pcs): Screw conveyors (3Pcs): Trough screw conveyor (2Pcs): CSV70 Pipeline (2Pcs): PFK70 Dust selection and dust filter (1 Pc): PF70 Dust filter (1Pc): ST70 Silo tank (6 m³) (2 Pcs): BS70 Briquette press (4 Pcs): The press piston presses the material into a conical tube, which creates a continuous rod with a diameter of 70 mm. The pressure is adjustable and the feed of the conveyor screw can be controlled in the same way. The exchangeability of the press tools enables the control of the quality and density of the manufactured briquettes. As an option for the various raw materials, we deliver various press scopes, which undergo testing before delivery, if the customer provides a raw material sample. By changing the press tool, the machine is also suitable for the production of litter and loose briquetting of feed, or even for making a mixture as an option. The material is pressed without binders or chemical additives. Depending on the density of the processed material, we obtain different products, the specific gravity of which can exceed 1 kg/dm3. The performance of the pelletizing and briquetting system is 1.5 tons/hour based on wheat straw. The performance of the production and the quality of the product are determined by the adjustable speed of the screw and the adjustable press pressure depending on the quality of the raw material. Electricity Demand 37+10 kW. Press pipe (4Pcs): Ribbed conveyor belt (1Pc) HF70 Cooling-heating operating temperature controller (4Pc): AVP70 Control (4Pcs): PELLETING technology for biomass: The manufactured finished product is a 6 mm pellet, 10-40 mm long. Raw material to be processed: hay, straws. Moisture content: max. 10%. To produce the pellets, the technology incl.:pre-shredding (drying), grinding, dosing unit ,moistening, pelletizing equipment, cooling system, screen, filter and a pellet bagger (manual) The type of the machine: MiniPell (1Pc) machine performance: 50-120 kg/hour press engine: 10 kW dosing unit: 0,37 kW weight: 750 kg Grinder (1Pc): Control grid and Manual bagger (1Pc)

Year of construction: 1992, condition: excellent (used), Hydraulic press brake Fab. DARLEY Type. EHP 150 - 43/37 Very good condition, year 1992 Technical data Make: DARLEY Type: EHP 150 - 43/37 Year of manufacture: 1992 working length: 4300 mm power: 150 t distance machine column: 3700 mm ram stroke: 175 mm Engine power: 11 kW Dimensions: approx. L 4.7 x W 1.6 x H 3.1 m (transport height 2.85 m) Weight: approx. 16 t Equipment: - Control Delem DA 58 - Block die: V14, V60, V40, V24, V12, V30, V22, V10 - Punch straight height 195 mm, segmented - 2. punch cranked height 195 mm, segmented, length 4.000mm - controlled axes: Y1, Y2, X, R, Z - motorized crowning - 2 support arms - operating instructions + test books All data without guarantee. The machine is in a very good condition. A demonstration under power is possible at any time in our exhibition hall. Bdsdsh U A Ibopfx Ab Tok

Condition: excellent (used), Complete planing line from intake to stacker with a Waco 3000 planer and surrounding equipment from System Hall Bdodpfx Abjm Uykne Tsk

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 95 kg, Equipment: documentation/manual, type plate available, Extraction capacity of filter unit at spigot*: 2200 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 1623 / W 508 /H 545 Colour: RAL 7035 Weight: 95 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Filter equipment*: - 40 mm aluminium mesh pre-filter (optional/retrofittable: PrePac pre-filter package) Bedpfx Ajum Uzasb Tjdk - 1 piece electrostatic filter cell - 20 mm knitted aluminium post-filter (optional: 40 mm post-filter range) OPTIONAL: Several pre-filter packages possible The application: Horizontal, electrostatic air cleaner with EC centrifugal fan for separating oil mist, emulsion mist and smoke from the hall air in recirculation mode. Vertical raw air capture via intake manifold with suction nozzle. Clean air recirculation via adjustable diffusion grille. Your advantages of the ELBARON series: - 6 appliance variants available - Directly from the manufacturer - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large programme of mounting and connection accessories - Quality made in Germany We have developed the hall extraction system as a cost-effective alternative to expensive centralised extraction systems or complex individual machine extraction systems. This allows you to protect the health of your employees and maintain your factory building without major investment. We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter devices on the market and are in use worldwide.

Condition: as good as new (ex-display), Year of construction: 2020, Double column press 20 T capacity, a) Closing speed up to 10 mm/sec b) opening speed up to 30 mm/sec c) table size between columns 1400x1100 mm d) ram size between columns 1400x1100 mm e) Manual lubrication (via grease nipple) f) UKF pump-cooling-filtration ( electrical cooling ) g) Pressure adjustment from 4 T to 20 T ( adjustable via rotary control ) h) Travel adjustable via slide control Type of construction Press design Double column press ,hydraulic Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 200 kN Free ripping force max. 20 kN Pressure build-up time Closed tool Steel on steel Max. 4 sec. Dimensions Max. Opening width 500 mm Stroke 300 mm Table height above floor, approx. 900 mm Height above floor (headroom) approx. 2800 mm Hall height min. 3,500 mm Parallel deviation at 20°C #ERROR! mm Deflection Determined at max. clamping force with 2/3 occupancy < = 0.4 mm/m Weight Total weight of the press without operating materials approx. 3 to Table cut-out Size 1100x850 mm Speeds Fast closing with 9 mm sec. Pressing speed 9 mm sec. Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of press/driving cylinders 2 pcs. Operating pressure max. 280 bar Pressing pressure build-up time 3-5 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH/PARKER approx. 35 L/min Oil volume approx. HLP 46 D 150 litres Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Circulation pump for cooling ACS approx. 6.5 L/min Electrical system Main supply 400 V AC Bedpfx Ajhmbhqjb Tjdk Control voltage 24 V Frequency 50 Hz Hydraulic connection Main motor 3 kW Total connection Approx. 5 kW

Condition: new, Year of construction: 2025, Machine characteristics Our electric pallet truck with a capacity of 1,500 kg is an irreplaceable solution that allows you to easily and effectively move heavy pallets and loads in warehouses, production halls and other logistics places. Thanks to advanced electrical technology, both lifting and driving are easy and convenient. The electric lifting system allows loads to be lifted smoothly to the appropriate height, ensuring precision and safety. However, electric driving eliminates the need for physical effort and allows efficient and quiet operation. A pallet truck with a capacity of 1,500 kg is not only efficient, but also reliable. Solid construction and high-quality materials guarantee long-lasting and reliable operation, even in difficult conditions. Thanks to this, you can be sure that the stroller will cope with even the most demanding tasks. Our solution has many advantages, including an ergonomic design that ensures comfort and convenience for the operator. The intuitive control panel allows you to easily maneuver and adjust the driving speed to your needs. The built-in speed control potentiometer is an innovative feature that allows the operator to adjust the travel speed to specific needs. This allows you to precisely control the pace of the trolley's movement, increasing safety and eliminating the risk of collision or damage. Regardless of the size of the warehouse or how crowded it is, our electric pallet truck ensures smooth and precise maneuvering. Operators can easily maneuver around curves, avoid obstacles and precisely place loads where they are needed. This increases work efficiency and saves valuable time. Safety is our priority. Our electric pallet truck is equipped with safety systems such as electromagnetic brakes, a belly switch, horn and protective features that minimize the risk of accidents and damage. One of the key features of our pallet truck is the use of an easily replaceable battery. This way, when the battery runs out, you can easily pull it out and connect it to the charger. This saves time and allows you to work continuously without having to wait for the truck to be fully charged. Practicality and mobility are key in a dynamic warehouse environment. Bdsdporicvdofx Ab Tjk The flap protecting the battery against weather conditions is another innovative feature of our pallet truck. It protects the battery against moisture, dust and other external factors, which increases its durability and reliability. You can rest assured that your battery is properly protected, even in difficult operating conditions. Technical parameters Load capacity 1500 kg Turning radius 1300 mm Height of raised forks 190 mm Height of lowered forks 85 mm Fork length 1150 mm Fork width 550 mm Wheel diameter 80/210 mm Battery voltage/rated capacity 24/20V/Ah Li-ion Operating time on a charged battery up to 3 hours Charging time 2.5 hours Drive motor power 0.75 kW Lifting motor power 0.8 kW Electromechanical brake Travel speed with/without load 3.5 / 4.5 km/h Weight 130 kg Dimensions 1700x550x1300 mm

Condition: excellent (used), Year of construction: 2005, pressing force: 50 t, Hydraulic press brake Fab. AMADA Typ. HFP 50-20 Year 2005 Technical data Make: AMADA Type: HFP 50-20 Year of construction: 2005 Effective length: 2090 mm Capacity: 50 t Bdedpfx Abjtzcxpj Tok Passage upright: 1,665 mm Stroke: 200 mm Projection: 400 mm Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Weight: approx. 4.8 t Equipment - Controlled axles: Y1, Y2, X, R, Z1, Z2 - FIESSLER light barrier at the front - Amada upper tool clamping - CNC control 3D AMNC graphics - Rear safety guard (hinged mesh doors) - Swivel operation - front left - Tools: o Upper tool straight, R 0.8mm, H 117mm, length 2,000 mm o Bottom tool V10/88°, length 2,000 mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2021, functionality: fully functional, pressing force: 500 t, Hydraulic 500 T Gantry Straightening Press with tool clamping device and parallel support for the bending blade a) Idle and pressing speed up to 17 mm/sec b) Opening speed up to 44 mm/sec c) Table size 2000 x 850 mm d) Open height 1500 mm e) Overall size approx. LWH 1500 x 3000 x 4300 mm f) Oil temperature indicator on the tank g) Lubrication via grease nipple h) Table with grid design i) Remote control j) Pressure adjustment from 80 T to 500 T via rotary dial k) Table moves hydraulically outward 700 mm for loading l) Cylinder moves left and right via racks m) Machine body powder-coated or double-coated n) T-slots according to customer requirements o) Cylinder induction-hardened p) Assembly, commissioning, and instruction are charged separately. Press type: GANTRY PRESS Thermally neutral 80 – 120 °C Number of operating sides: 3 Forces Max. press force: 5,000 kN Max. free tear-off force: 800 kN Pressure build-up time: Closed tool, steel on steel: Max. 3 seconds Dimensions Max. opening width: 1,500 mm Stroke and min. opening: 1,300 mm/200 mm Bsdpfjwgakvex Ab Tedk Table height above floor: approx. 850 mm Height above floor (overhead height): approx. 4,300 mm Hall height: min. 5,000 mm Deflection Determined at max. closing force with 70% occupancy: < = 1.2 mm/m Weight Total weight of the press without operating materials and table top: approx. 25 t Speeds Quick closing with 17 mm sec. Pressing speed at F max.

Condition: new, Year of construction: 2025, The scissor trolley with a capacity of 150 kg is a compact device ideal for working in tight spaces and ensuring stable load lifting. It has a wheel lock and a security system, which translates into safety while working. The trolley is used in many industries, including warehouses and production halls. Machine description The scissor platform trolley with a capacity of 150 kg is a unique tool that is perfect for various warehouse, production and logistics applications. Thanks to its solid construction and innovative technical solutions, this trolley is an invaluable partner in the area of ​​lifting and moving heavy loads. Its main characteristic feature is the scissor lifting mechanism, which enables smooth and precise lifting of loads weighing up to 150 kg to the appropriate height. This makes this stroller irreplaceable in situations where it is necessary to ergonomically raise and lower objects while ensuring the user's safety. The scissor platform trolley has been designed with ease of use and maneuverability in mind. Equipped with solid wheels, it allows smooth movement even in difficult terrain conditions. Additionally, the compact design allows for efficient movement even in tight warehouse spaces. The safety of use of the scissor platform trolley with a capacity of 150 kg is guaranteed by the use of high-quality materials and safeguards that prevent the load from falling accidentally. Intuitive control allows you to precisely adjust the lifting level, which in turn translates into precise operation and optimized use of the truck in various tasks. In short, a scissor platform trolley with a capacity of 150 kg is a reliable tool that combines durability, functionality and safety, making working with heavy loads much more effective and comfortable. Technical parameters MAXIMUM CAPACITY 150 kg LIFTING HEIGHTS 225-745mm PLATFORM DIMENSION 740 x 450 x 35 mm PLATFORM HANDLE HEIGHT 825mm WEIGHT 42 kg Standard equipment: Reinforced polyurethane wheels Ergonomic handle Sealed hydraulic foot pump Bdedsv Aiinspfx Ab Tjk Adjusting the descent speed of the platform Lock on the road wheels Manufacturer: Cormak

Condition: good (used), Year of construction: 1992, Motorized Swing Bending Machine Make: Stückmann & Hillen Model: 23111 3050x2mm Very good condition, year of manufacture: 1992 Technical Data Manufacturer: Stückmann & Hillen Model: 23111 Year of manufacture: 1992 Working length: 3050 mm Stroke: 250 mm Adjustable bending beam: 80 mm Sheet thickness: 2 mm Dimensions: approx. L 4.35 x W 2.50 x H 1.60 m Weight: approx. 5 t Equipment: • CNC-controlled backgauge 1000 mm Bjdjwtgnhspfx Ab Tedk • NC control Midomat 2000 • Bending rail: 20 mm • Sharp rail 45° All details without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 2,400 mm, total width: 1,500 mm, total length: 2,400 mm, pressing force: 20 t, overall weight: 2,000 kg, type of input current: three-phase, control cabinet width: 80 mm, input voltage: 400 V, control cabinet length: 60 mm, power: 22 kW (29.91 HP), input current: 32 A, ambient temperature (min.): 10 °C, ambient temperature (max.): 40 °C, height adjustment type: hydraulic, Equipment: documentation/manual, If the press does not exactly match your requirements profile, please click here to request a customized offer tailored to your needs: Contact us for a customized quote HIDROBRASIL manufactures presses to your exact specifications at surprisingly competitive prices! ##### 20 T tablet press, single column press, C-press, manual insertion press Machine type: Hydraulic single-column press Year of manufacture: 2023 Location: Gelsenkirchen, Germany Technical specifications: - Pressing force: max. 20 tons (at 250 bar) - Free tearing force: max. 20 kN - Pressure build-up time: max. 2 seconds (closed tool steel on steel) - Maximum opening width: 500 mm - Stroke and minimum opening: 400/100 mm - Table height above floor: 800 mm - Total height: approx. 2400 mm - Hall height: at least 3,500 mm - Parallel deviation: +/- 0.1 mm at 20 °C - Deflection: 0.3 mm/m (at max. clamping force with 70 % occupancy) - Total weight: approx. 2 tons - Travel speeds: Fast closing 120 mm/s, pressing speed 10 - 5 mm/s - Sound pressure level: max. 78 dB(A) measured at a height of 15 m at the control panel in accordance with DIN 45635-T16-KL3 - Hydraulics: - Number of pressing cylinders: 1 pc. - Operating pressure: max. 250 bar - Pressure accuracy during the pressing stroke: +/- 5 bar - Main pump: Gear pump approx. 10 l/min - Oil volume: approx. 150 liters (HLP 46 MW) - Ambient temperature: max. 40°C - Oil temperature: max. 55°C - Electrical system: - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor: 22 kW - Total connection: approx. 6 kW - Switch cabinet: - Protection class: IP 54 - Reserve space: approx. 20% - Cooling: no - Interior lighting: no - Operating mode switch: lockable Features: - Light barrier: SICK/PILZ/SCHMERSAL - Position adjustment: via adjustable sensors - Pressure setting: 5 T to 20 T, adjustable via rotary control - Two-hand operation: standard, optional foot operation available - Table top: as a tray with 50 mm high edge and side drain - Control cabinet: on the right of the press, IP 54 protection class Function and operation: - Activation: via main switch - Pressure setting: via rotary control - Cycle activation: via two-hand operation or optional foot pedal - Safety features: in accordance with EU standards and UVV regulations Special features: - Crimping tool components: Upper tool with 8 pressing pistons, 3-part lower tool - Pressing cycle: can produce 8-12 pressed parts per minute - Hydraulic unit: can be completely dismantled for maintenance work Service and warranty: - Monitoring and testing: in accordance with DIN ISO 16092-3-2018 Bdodstv Ewdopfx Ab Tek - Customer service: from Waibstadt or Gelsenkirchen - Documentation: in accordance with CE standards --- Are you looking for a customized machine? Contact us for a customized offer.

Condition: new, Year of construction: 2025, If you run a warehouse or need to move heavy items, a mast pallet jack may be the perfect tool for you. A mast trolley is a type of lift truck that will allow you to lift and move pallets in a warehouse. Our offer includes trolleys that can lift loads up to 3,500 mm. Introduction to mast hand pallet trucks Mast hand trucks used mainly for warehouse work and production halls for loading and unloading goods. Thanks to its basic features such as versatility, solid construction and lifting height, it has many applications and offers many benefits for operators. What is a mast pallet truck? A mast pallet truck is a type of lift truck that is equipped with a mast with high lifting capacity. The mast is usually made of a solid material, such as steel, and can lift a load to a certain height. Thanks to this, the mast pallet truck allows you to move heavy goods to different levels in the warehouse. Application of mast lift trucks These are reliable transport devices that are widely used in various industries. They are essential in warehouses, where they enable easy operation of pallet racks and loading and unloading pallets from trucks. In addition, they are also popular in production halls, where they enable the transfer of materials to various workstations. This universal model of pallet truck is an ideal solution to increase efficiency in warehouses, production halls and other places where it is necessary to move heavy pallets. Thanks to its advanced functions, the WRHS 1610 pallet truck with a capacity of 1,000 kg and a lifting capacity of 1,600 mm is an irreplaceable tool in the field of logistics and warehousing. They are perfect for unloading and loading cars. Technical parameters Load capacity 1000 kg Lifting height 1600 mm Fork dimensions (LxW) 1150 x 145 mm External fork width 550 mm Width between forks 230 mm Bsdpfjricgajx Ab Tjdk Height with lowered forks 1970 mm Height with raised forks 1970 mm Minimum fork height 90 mm Total length 1630 mm Total width 740 mm Turning radius 1400 mm Swivel wheels 180 x 50 mm Fork rollers 74 x 70 mm Weight 181 kg

Condition: excellent (used), Year of construction: 1994, Hydraulic guillotine shear Fab. HACO Typ. HSLX 3000x6/8mm Bedpfolp Nrbjx Ab Tedk Year 1994 Technical data Make: HACO Type: HSLX 3006 / 8 Year of manufacture: 1994 sheet width: 3050 mm sheet thickness: 6 mm / 8 mm on 1000 mm sheet length cutting angle: 0.5 - 3 number of strokes: 9/17 drive motor: 11 kW number of hold-downs: 18 pcs. space requirement: approx. 3,7 x 1,7 /additional lay-on arms) x 1,6 mm Machine weight: approx. 6 t Equipment - autom. cutting angle adjustment - Automatic cutting gap adjustment - Cutting line illumination - Support arms - Knife with 4 cutting edges - Cutting length limitation - CNC backgauge 705mm adjustment range 705 mm - angular stop - Instruction manual All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.