Used Halls for sale (522)

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Kedpfoyw Rhmox Abnedr Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: new, Year of construction: 2025, Combustion chamber output: 510 kW Working output: 407 kW New, original packaging: Yes Smoke vent diameter: 250 mm Hot air supply ducts: 4 x 350 mm Combustion chamber length: 1900 mm Combustion chamber width: 900 mm Combustion chamber height: 900 mm Air supply: 26,000 m³/h Power consumption: 4500 W Kdjdpfx Ask Utrwebnsr Designed for room volume: 8000 m³ Area to be heated: 1800 m² Oven height without hot air supply ducts: 3000 mm Oven width: 1220 mm Oven length without flue gas fan: 2700 mm Weight: 1575 kg

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: GEA Happel, air heater heat exchanger -Type: 4124/403/441 -Power: kW -Nominal air output: approx. 2800 m³/h -Fan: Ziehl-Abegg -Operating pressure: max 13.7 bar -Number: 2x air heaters available -Price: per piece -Dimensions: 885/550/H600 mm -Weight: 90 kg/piece Kedju Tlhvopfx Abnsdr

Condition: used, functionality: fully functional, overall weight: 3,000 kg, loading space length: 8,000 mm, loading space width: 2,400 mm, total length: 10,000 mm, total width: 4,000 mm, total height: 600 mm, Year of construction: 2009, I am selling a very robustly built harbor trailer for ships up to 20 meters or 20 tons. It features axle swivel steering and is very wide, making it extremely stable. It has various adjustable supports and cradles for your boat/ship. It can be disassembled. Loading on-site is possible. No documents, no registration, no brakes, etc. Weight: approximately 3 tons Frame length: 8.6 m / Rear axle width: 3.6 m / Width between rear wheels: 2.4 m / Frame height: approx. 0.6 m / Frame width: 1.0 m / Tire diameter: 1.05 m I used to place my tugboat, weighing approximately 22 tons, on this trailer and maneuver it around the operating area. Kodpszu Szaefx Abnsdr I shortened the drawbar to approximately 1.3 meters, but it can be extended again. Inspection and/or pickup in 06188 Zwebendorf. Rüdiger Ruwolt Halle-Saale Shipping - Ship transport

Condition: ready for operation (used), functionality: fully functional, conveyor belt width: 600 mm, working width: 600 mm, Complete puff pastry line RIJKAART / RINC 600mm | Functional, Tested For sale: a complete, industrial-grade lamination line for the automatic production of puff pastry, semi-puff pastry, and Danish pastry from renowned Dutch brands, Machinefabriek C. Rijkaart bv / Rinc. FOR SALE: The line was purchased from a distributor and fully prepared for operation under a specific production contract. Due to circumstances beyond our control, the contract was not finalized. The machine has not been operated continuously and is 100% free of legal defects. Kdodpfx Ajzivw Usbnor TECHNICAL CONDITION AND SERVICE: The machine underwent a complete technical inspection after purchase. All components requiring attention have been replaced with new ones, including new main bearings and some conveyor belts. The line has been successfully connected and mechanically tested. I have an up-to-date video recording of the start-up tests (available immediately via WhatsApp). TECHNICAL PARAMETERS: Working width of the belt: 600 mm (Euro standard – ideal for baking trays) Estimated capacity: approx. 400 kg – 1000 kg of dough per hour (depending on the thickness of the sheet and the product) Construction: Stainless steel / acid-resistant steel with Rijkaart's legendary, robust mechanics (very easy to maintain, without unreliable PLC electronics). THE SET INCLUDES: Automatic dispenser / pump for margarine and fat (fat pump) Triple station with independent calibrating rollers (multiroller) for precise dough stretching Original, central Rinc electrical and control cabinet with a clear synoptic panel Two-level conveyor / roller feeder (inox roller bed) Complete set of 600 mm conveyor belts LOGISTICS AND COLLECTION: The main feeding section is located in the production hall; the remaining components are safely stored under a sealed industrial tent. Dismantling and transport are the responsibility of the buyer. We provide free assistance and loading with a forklift on site. TERMS OF SALE: Sale only to companies – we issue a full VAT invoice. Starting price: PLN 299,000 net (negotiable within reason).

Condition: used, Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil Kdodpfx Aovrdr Nobnor -Handover: in its current condition as inspected -Fan motor: missing -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 -Power: kW -Fan: missing -Operating pressure: max 10 bar -Dimensions: 800/710/H740 mm -Weight: 27 kg

Condition: good (used), An electric bi-parting sliding gate is being offered. Hot-dip galvanized. Year of manufacture: approx. 2005. Dimensions: Total length of both leaves: 16.60 m. Kdodpfex N Ta Njx Abnsr Gate opening: 12.00 m. Height: 1.20 m. Complete with drive units. Includes 4 fence panels: length 2.60 m x height 0.90 m.

Condition: new, Year of construction: 2026, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 10,000 mm, inner dimension height: 5,000 mm, filter area: 250 m², volume flow: 16 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Kodpfx Asu Ey Dlebnjdr Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, Year of construction: 2025, Combustion chamber output: 350 kW Working output: 279 kW Flue gas outlet diameter: 200 mm Hot air distribution ducts: 1 x 600 mm Kdodpfx Absyffyljnor Combustion chamber length: 1200 mm Combustion chamber width: 740 mm Combustion chamber height: 1040 mm Air delivery: 17,800 m³/h Hot air fan power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Area to be heated: 1,000 m² Oven height without hot air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We offer a HEINEN Spiral Freezer industrial spiral freezer with an original Control Cabinet, manufactured in 2017. This modern device is designed for rapid freezing of food products – ideal for meat, poultry, fish, and bakery plants, as well as ready-made meal producers. The spiral freezer allows for high efficiency with a small footprint, thanks to a multi-level spiral conveyor belt. The HEINEN Spiral Freezer operates at 3×400 V, 50 Hz, with a rated current of 63 A. The advanced Control Cabinet allows for precise setting of freezing parameters, control of temperatures, belt speed, and product dwell time in the spiral tunnel. This makes it easy to adapt the process to different product ranges – from individual portions of meat or poultry fillets, through burgers, nuggets and fish, to bread, cakes and ready meals. Kodpfx Abjyibfvenedr The HEINEN spiral freezer ensures fast, even freezing, which translates into better product structure, less weight loss, and higher quality after thawing. The stainless steel construction facilitates cleaning and meets the hygiene requirements of the food industry. Technical data: Manufacturer: HEINEN Model/name: Spiral Freezer Type: Control Cabinet Year of manufacture: 2017 Power supply: 3×400 V, 50 Hz Rated current: 63 A Application: rapid freezing of meat, poultry, fish, bread, desserts, ready meals Belt width: 400 mm Number of levels: 18 Product entry height: 2900 mm Product exit height: 700 mm Width between levels: 65 mm Advantages of the HEINEN spiral freezer: High efficiency with a small footprint – the spiral belt allows for long freezing times in a small hall area. Repeatable freezing parameters – the precise Control Cabinet from 2017 guarantees a stable process. Flexibility of use – suitable for freezing a wide range of food products. Better product quality – rapid freezing reduces juice leakage and preserves structure and taste. Stainless steel construction – easy to clean, high hygiene and long service life in industrial use.

Condition: used, Year of construction: 2014, operating hours: 3,085 h, load capacity: 800 kg, lifting height: 1,580 mm, fuel type: electric, construction height: 1,860 mm, gearing type: automatic, overall weight: 679 kg, empty load weight: 495 kg, total length: 1,777 mm, color: red, mileage: 3,085 km, first registration: 11/2014, suspension: other, number of seats: 1, driver cabin: other, emission class: none, fuel: electricity, The BT SWE 080L stands for a proven combination of efficiency, stability, and precise control in daily warehouse operations. This model is aimed at companies seeking to optimize their internal processes reliably and economically, without sacrificing performance. The electric drive enables quiet and emission-free operation, which is a key advantage, especially in enclosed halls and sensitive working environments. The automatic transmission ensures a particularly smooth driving experience and intuitive handling, allowing workflows to be carried out seamlessly without unnecessary interruptions. With a lift height of 1,580 mm, this stacker provides optimal conditions for efficiently moving goods on different levels and making the best use of warehouse space. This not only increases productivity but also leads to sustainable improvements in warehouse organization. Its compact design, with a width of only 726 mm, makes it a dependable partner even in narrow aisles and confined spaces. At the same time, the robust construction ensures stability and safety during every operation, even under heavy use. The 3,085 operating hours reflect solid, continuous use and show that this unit is built for everyday practical applications. With first registration in November 2014, this is a mature and field-tested model that has proven itself over many years. This stacker represents a well-considered investment for companies seeking durable technology, low operating costs, and reliable performance. With the BT SWE 080L, you are securing an industrial truck that will optimize your workflows and deliver tangible benefits in daily operations. Kdjdjymgvdepfx Abnjr Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors.

Condition: new, Year of construction: 2025, Firebox output: 175 kW Operating output: 140 kW Flue diameter: 200 mm Warm air duct: 1 x 500 mm Firebox length: 950 mm Firebox width: 600 mm Firebox height: 860 mm Air flow rate: 8900 m³/h Kdodpfji Hplrjx Abnsr Power consumption: 3500 W Designed for room volume: 3000 m³ Area to be heated: 500/600 m² Oven height without warm air ducts: 2200 mm Oven width: 930 mm Oven length without flue gas fan: 1700 mm Weight: 615 kg

Condition: excellent (used), LDS / CTS Vibration Testing System Type: V850-440 LPT 750C + CTS CV-70/1100-5 Manufacturer: LDS / CTS / IMV For sale is a complete electrodynamic vibration testing system consisting of an LDS shaker system, an LDS SPA30KCE power amplifier, an IMV K2+ vibration controller, and a CTS climate chamber. Suitable for combined vibration and climate testing in the automotive, aerospace, electronics testing, research & development, material testing, and industrial quality assurance fields. The blue hall crane / portal crane visible in the pictures is not included in the scope of supply. Shaker / Vibrator Manufacturer: Ling Dynamic Systems Ltd. (LDS) Type: V850-440 LPT 750C Air-cooled electrodynamic vibrator. Armature diameter: 440 mm Frequency range: DC – 3000 Hz Resonant frequency: approx. 2200 Hz Sine force: approx. 22.2 kN peak Random force: approx. 22.2 kN RMS Shock force: approx. 66.7 kN peak Max. velocity: 2.0 m/s Displacement: 50.8 mm pk-pk Internal load capacity: approx. 350 kg Compressed air supply required: Load support: approx. 5.5 bar Air isolation: approx. 6.9 bar Shaker weight: approx. 1,300 kg Power Amplifier Manufacturer: LDS Type: SPA30KCE Class-D high-performance switching amplifier. Supply voltage: 50 Hz: 380 / 400 / 415 / 440 V Kdodpfjy Sy Npsx Abnjr 60 Hz: 380 / 400 / 415 / 440 / 460 / 480 / 500 / 520 V Current setting: 400 V Max. input power: 38.14 kVA Max. output power: 21.0 kW Output voltage: 100 V RMS Amplifier weight: approx. 550 kg Controller IMV K2+ Vibration Control System Multi-channel vibration controller including Dell Precision PC system. Functions: Sine Resonance dwell Limit control Random Sine-on-random PSD limit control Shock Scheduler System monitor CTS Climate Chamber Manufacturer: CTS Clima Temperatur Systeme GmbH Type: CV-70/1100-5 Year of manufacture: 10/2019 Temperature range: -70 °C to +180 °C Humidity range: 10 % to 95 % RH Rated voltage: 400 V / 3/N / 50 Hz Power: 15.9 kW Refrigerant: R452A: 6.8 kg R23: 2.1 kg Equipment Combined climate and vibration testing Slip table / Fixturing table included Completely wired testing system Service and maintenance documentation available Slip table: Mounting area: approx. 760 x 850 mm Threaded insert spacing: approx. 100 mm Dimensions / Weight Large industrial system / heavy-duty system. Total system weight: approx. 6,000 – 7,000 kg Transport exclusively via a suitable heavy-duty transport company. Dimensions, weights and technical data are partially estimated or not completely known. Condition Used industrial system from industrial use. Optical condition, see pictures. Inspection and testing on site possible by arrangement. Scope of supply LDS V850-440 LPT 750C shaker system LDS SPA30KCE power amplifier IMV K2+ vibration controller Dell Precision PC system CTS climate chamber CV-70/1100-5 Slip table / Fixturing table Accessories and documentation as shown in the pictures Not included in the scope of supply: Blue hall crane / portal crane. Loading possible by arrangement. Commercial sale without warranty. Subject to changes, errors and prior sale.

Condition: used, mileage: 1,800 km, first registration: 04/2020, overall weight: 9,000 kg, axle configuration: 2 axles, These front-mounted sweepers can be operated via the front PTO shaft. Of course, we can also accommodate your specific requirements, special requests, and additional optional equipment. The brush rollers are equipped with alternating plastic and wire brush discs as standard to achieve the best possible sweeping result, even with heavy and stubborn dirt. * Dücker FKM 2400 * with municipal mounting plate receiver * Device plate size 3 and 5 * Very little use and always stored in a hall * Working width 0°. 2,400 mm * Working width 15° 2,300 mm * Working width 30° 2,075 mm * Sweeper roller diameter: 600 mm * Hydraulically raise/lower * Hydraulically swivel right/left * 2x water tank * Water spray system * Support wheels * Support Made from a sturdy, torsion-resistant housing with double-walled construction. The sweeper roller is suspended and can be adjusted in height, with stepless control, and consists of disc brushes in plastic-wire, 600 mm diameter, and heavy-duty wheels, 250 mm diameter, directly attached to the housing. Working width: 2.4 m Overall width: 2.65 m Sweeper roller diameter: 600 mm Lifting device for front quick-change system: Device plate size 3 or 5, including cylinder Hydraulic drive, minimum oil flow at 180 bar: 40 l/min Weight: 580 kg Additionally equipped with: Hydraulic tilting of the brush to the right/left Water spray device in front of the sweeper brush Boundary lights LED and warning flags Switching valve, electric Ksdpfx Aeziudmebnjdr Financing is possible through our partner banks; we are happy to assist you. We expressly reserve the right to sell the item in the meantime, as we also offer this item on other platforms. Information on accessories is provided without guarantee. Subject to change, prior sale, or errors. We strongly recommend and offer an inspection and examination so that no false impressions arise in the buyer regarding the condition and suitability. Inspections and examinations are possible at any time by prior arrangement and are expressly desired.

Condition: used, Year of construction: 2000, operating hours: 1,145 h, functionality: fully functional, working width: 1,145 mm, overall weight: 2,065 kg, tank capacity: 265 l, water tank capacity: 265 l, Brand: Tennant Model: 7400 Year of manufacture: 2000 Operating hours: 1145 Drive: Gas / internal combustion engine Type: Ride-on sweeper-scrubber Weight: approx. 2065 kg Ksdpfx Abjx Ib I Ssnodr Functions: - Sweeping coarse and fine debris - Scrubbing with water and detergent - Direct suction of dirty water - Suitable for warehouses, production halls, workshops, and parking garages. Condition: Used machine with normal signs of wear consistent with its age. Fully equipped. Wear parts such as squeegees and brushes may need to be replaced or adjusted over time, depending on intended use. Note: Sale in current condition. Viewing by appointment possible.

Condition: like new (used), Steel constructions – 2.50 PLN per kg Kdjdpfx Abey H Eu Tjnsr

Condition: excellent (used), Year of construction: 2001, Laser marking system Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Water connection Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Kedpjq Abnnjfx Abnsdr Water consumption dependent on inlet temperature Outlet temperature < = 35°C Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Ambient conditions for operation Temperature +10°C to +40°C Humidity < 70% Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: ready for operation (used), Year of construction: 2016, A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in between. The entire line has been dismantled and stored. Videos on request. Ksdpfxewzx Tfe Abnodr

Condition: new, Year of construction: 2025, Firebox output: 125 kW Kdsdpfxjk Utrhs Abnsr Working output: 99 kW Diameter of flue outlet: 180 mm Warm air supply pipes: 2 x 250 mm Firebox length: 750 mm Firebox width: 560 mm Firebox height: 700 mm Air supply: 6300 m³/h Power consumption: 1500 W Designed for room volume: 1500 m³ Area to be heated: 300/350 m² Oven height without warm air supply pipes: 1980 mm Oven width: 800 mm Oven length without flue gas blower: 1280 mm Weight: 415 kg

Condition: new, Year of construction: 2025, Firing chamber output: 350 kW Working output: 279 kW Exhaust duct diameter: 200 mm Warm air supply ducts: 3 x 300 mm Firing chamber length: 1200 mm Kjdpfx Ajk Utrtsbnsdr Firing chamber width: 740 mm Firing chamber height: 1040 mm Air supply: 17800 m³/h Power consumption of warm air blower: 3 kW Power consumption of flue gas blower: 600 W Designed for room volume: 5000 m³ Area to be heated: 1000 m² Oven height without warm air supply ducts: 2500 mm Oven width: 1100 mm Oven length without flue gas blower: 1900 mm Weight: 850 kg

Year of construction: 2015, condition: used, Fan heater, electric heater, heater, electric heater, electric fan heater, heat exchanger, air heater, air heater, duct air heater, duct air heater -Eltra item no.: 1BGL1CE04001 Kedpfx Absfixa Hsnjdr -Power: 30kW -Voltage: 467VAC -Dimensions: 460/350/H535 mm -Weight: 23kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: NOH366, ABUS ELV Crane Skyline Crane Runway Bridge Crane Hall Crane Crane There are 3 identical cranes available! Load capacity / Lifting capacity: 5t - 5000KG Span: 14,260mm, external dimension approx. 14,500mm Year of manufacture: 2003, with radio remote control and pendant control as backup Lifting height: 6m Overall height (top of crane to hook): approx. 900mm End carriage length with buffer: approx. 280cm Further data to follow Crane is dismantled and immediately available Very good condition, inspection book is available Kdodpjxtyvpjfx Abnor Column-mounted slewing cranes and wall-mounted slewing cranes also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight carrier possible, please enquire with postcode Collection preferred

Year of construction: 1989, condition: good (used), LEUSHUIS 5000L | Vertical process tank Kdsdpfx Abjy Umwfenor Manufacturer: Leushuis Apparatenbouw B.V. Number: A-32058-3005 H-4 Year of manufacture: 1989 Capacity: 5000 liters Hydrostatic test pressure: 0.9 bar Design temperature: 50 °C Weight of empty tank: 580 kg Overall dimensions: Ø 1800 mm x 4900 mm Tank is damaged. This 5000-liter vertical storage and process tank is a classic device designed for use in the food processing industry. Originally designed and certified for storing and internally transporting salad mayonnaise, it is also ideal for handling high-viscosity media such as cold sauces, ketchups, mustards, liquid fats, oils, and bases for ready-made dressings. The tank features a slender, vertical design (1800 mm diameter with a height of almost 5 meters), which allows for optimal utilization of usable space in machine rooms or production halls. Made of acid-resistant stainless steel, it guarantees chemical neutrality – it does not affect the taste, smell, or physicochemical properties of the stored food emulsions. The tank is designed to operate at elevated temperatures (up to 50 °C), which allows for receiving and maintaining products in a liquid state directly after thermal processes or pasteurization.

Condition: excellent (used), Year of construction: 2008, A KWB Powerfire TDS 150 is a premium Austrian, robust industrial biomass boiler designed for economical and reliable heating of larger buildings and facilities with continuous heat demand. The boiler's output can be adjusted between 45 and 150 kW to match the current heat demand, allowing it to operate efficiently even at partial can be used with both wood chips and pellets, providing a high degree of flexibility in fuel selection. Fully automatic operation The high degree of automation of the KWB Powerfire significantly reduces the need for continuous handling. The moving grate burner system, the lambda probe combustion control, and the cyclone combustion chamber ensure efficient, uniform combustion even when using fuels of varying quality. Main advantages of the system: Automatic output control Lambda probe combustion control Automatic ignition Moving grate, self-cleaning burner system Automatic heat exchanger cleaning Automatic ash removal KWB Comfort control Robust, industrial design Low operation and maintenance requirement Can be operated with both wood chips and pellets Ideal application areas: Industrial and production halls Agricultural sites Horticultures and greenhouses Hotels and guesthouses Condominiums and larger residential buildings Schools, sports facilities, and public institutions Kedpfozqnp Sjx Abnsdr Workshops and warehouses Smaller local district heating systems

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 12 months, workpiece weight (max.): 200 kg, temperature: 220 °C, heating capacity: 115 kW (156.36 HP), workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, Powder coating system, manual operation, with 3-zone pre-treatment & cross conveyor Turnkey powder coating system with stainless steel pre-treatment. Maximum flexibility for your production: Cascaded 3-zone pre-treatment including deionized water treatment, energy-efficient oven (gas or electric), and robust conveying system with cross movement. Complete with assembly & training – individually adaptable to your hall dimensions/product range and requirements! For sale: a well-conceived concept for a turnkey, manual powder coating system. The system combines a wet chemical pre-treatment in stainless steel design, a walk-in powder coating booth, an energy-efficient drying and curing oven, and a flexible conveying system with cross movement. All components are designed as a modular basic concept. The system components: 1. Chemical 3-zone spray pre-treatment (stainless steel) process: 1. Degreasing/phosphatization (electrically heated, 72 kW) 2. Rinse with city water 3. Rinse with deionized water Construction: - Robust walls and treatment tanks made of high-quality stainless steel AISI 304. Equipment: - Automatic cascade refill system to optimize water consumption, chemical-resistant and adjustable nozzles, oil skimmer to extend the service life of the degreasing bath, automatic dosing unit, and a powerful exhaust fan (5,000 m³/h). Water treatment: Kdodpfxozu Rpis Abnjr - Including integrated reverse osmosis system (300 l/h) with a 2,500-liter tank and PLC control for consistently high rinsing water quality. - Max. component dimensions: 3,000 x 800 x 1,500 mm (L x W x H). 2. Combined tack water dryer & curing oven (thermoblock): - Working area: 3,500 x 2,000 x 2,900 mm (L x W x H) per oven with a usable opening of 2,000 x 2,200 mm (W x H). - Heating system: combined via gas (Riello BS2 burner, 82 kW) and/or electric (82 kW). - Insulation & recirculation: 180 mm rock wool insulation on walls and roof (100 mm on the floor). Inverter-controlled recirculation with 7,500 m³/h guarantees uniform heat distribution up to max. 220 °C. 3. Walk-in powder coating booth - Dimensions: Generous booth dimensions of 5,000 x 3,000 x 3,200 mm (L x W x H). - Extraction & filtration: Effective extraction capacity of 8,000 m³/h (5.5 kW motor) with 4 cartridge filters incl. auto. pulse air cleaning. In addition, an absolute pocket filter on the roof. 4. Conveying system with cross movement - Load capacity: 200 kg load capacity per carrier or up to 600 kg total load in the trolley. - Layout: Approx. 127 m of rail network including 2 trolleys for the cross-movement trolley, crossbars (L = 3 m) and pneumatic locking and unlocking units for ergonomic material handling. 5. Central Siemens PLC control - Central Siemens 7" color touchscreen: all temperature profiles, rinsing cycles, conveying sequences and extraction systems can be intuitively monitored and controlled. Individual customization options: Since every B2B project is unique, the configuration shown can be customized in almost all parameters: Free scaling of all usable dimensions (L x W x H) of pre-treatment, ovens, and booth. Adjustment of the conveying system to your hall geometry and higher load capacities. Heating type (pure gas, pure electric, or hybrid) can be freely selected. Extension of the pre-treatment zones (e.g., passivation, demineralization).