Used Halls for sale (522)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Kdedpfx Abozizkysnjr Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: good (used), Year of construction: 2014, Warehouse offices, room-in-room system, approx. 39 m² – used: Price ex works: €5,950 (net), disassembled, packed and loaded! Item no. 9: Kdodpfx Aezqzxtsbnor Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, probably 2014 Walkable roof with a maximum load capacity of 100 kg Element width: approx. 1.03 m Length: approx. 9.30 m (9 elements) Depth approx.: 4.25 m (4 elements) Height: approx. 2.96 m 1x door All offices are closed on three sides and are therefore positioned with one side against the hall wall Includes lighting, etc., as available Without flooring Sale without furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), Year of construction: 2014, Warehouse offices, room-in-room system, approx. 19 m2 – used: Price ex-location: €2,950.00 (net), dismantled, packed, and loaded! Item 10: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Walkable roof with a maximum load capacity of 100 kg Kodpfx Abozqzw Aensdr Element width: approx. 1.03 m Length: approx. 5.24 m (5 elements) Depth approx.: 3.64 m (3 elements and 1 narrow element) Height: approx. 2.96 m 1 door All offices are enclosed on three sides and are therefore positioned with one side against the hall wall. Includes lighting, etc., as available. Without flooring. Sale without furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: good (used), functionality: fully functional, Total width: 86,400 mm. Trusses: 9x 9,600 mm. Total length: 87,000 mm. Sections: 29x 3,000 mm. Total area: 7,517 m². Leg height: from 3,700 to 4,550 mm. Roof: screen installation, pull-push system. Façades: screen installation, twin-roll system. Located in Germany, Lake Constance region, built according to German standards. Details: Legs: box section 120x60 mm. Kdjdpfx Aey Ir Hljbner Truss length: 9,480 mm. Upper box section: 60x30 mm. Lower box section: 60x30 mm. Diagonal: round 25 mm. Included: Complete steel structure. Screen drive mechanism. Façade installation. All small materials that can be saved for reuse during dismantling. Excluded: The screens themselves, not reusable. Wiring for the installation, not reusable. Screws, bolts, and nuts that cannot be salvaged.

Condition: excellent (used), Used steel hall, 36.5 x 13.5m, eaves height approximately 9.8m from finished floor level, gable roof with 3° pitch, top of rail for mounting bridge cranes approximately 8.5m above finished floor level. Originally, the existing hall had 2 x 10t cranes installed. Steel structure including roof and wall purlins, crane runway, 2 x 10t cranes – without wall panels, windows, and doors. As can be inspected on site. Base plates must be newly constructed by the buyer. Kdodpfepqx I Hex Abnor Price is for the hall as it stands at the location: 56759 Kaisersesch.

Condition: used, Year of construction: 2006, functionality: fully functional, We offer for sale a prefabricated warehouse hall located on the premises of our company in Žatec. The hall will be available for sale due to the construction of a new operational hall. Technical specifications: Dimensions: 68.5 x 12 m Area: approximately 822 m² Height: approximately 5.55 m Steel structure Trapezoidal cladding Gable roof Gate Windows The hall is particularly suitable as: Ksdpfezmttnjx Abnodr Warehouse Production hall Agricultural hall Service center Workshop Logistics center An advantage is the high-quality steel structure and the possibility of reassembly. The building does not contain asbestos. Viewings are possible by appointment. Dismantling and removal by agreement. Price negotiable.

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Auction of a fully demountable, multifunctional commercial hall! TECHNICAL DETAILS Dimensions Hall 1: Width: 22 m Length: 70 m Height: 6 m Dimensions Hall 2: Width: 23 m Length: 20 m Height: 6 m Roof insulation: EPS approx. 100 mm FEATURES 3 doors & gates Walls: Interior chambered sections filled with insulation bags, cladded with steel trapezoidal profile sheets Steel deck profile sheet roof Secondary steel structure: steel frames and columns Purlins Wind bracing for structural rigidity Kjdpex T Dgzefx Abnodr Note: Approximately 4 trucks are required for transport. The roof sections have a transport length of around 10–15 meters. For the longest components, a truck with an 18-meter loading length will likely be needed.

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: CR-16/994882, Demag EPKE-O bridge crane, hall crane, crane, crane gantry, crane runway Load capacity / lifting capacity 3.2 - 3200 kg Gauge approx. 17000 mm, overall dimension approx. 17200 mm Demag DR-COM wire rope hoist 3200 kg (EKDMR 3) Lifting height 10 m with floor control and fine positioning Overall height from top of crane to hook approx. 1100 mm Head beam length with buffer approx. 2.8 m Crane is dismantled and available immediately Very good, used condition Column-mounted swivel cranes and wall-mounted swivel cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Kodpozh Uylefx Abnodr Shipping via freight forwarder is possible, please inquire with your postal code Collection is preferred

Condition: excellent (used), Year of construction: 2020, operating hours: 19,409 h, functionality: fully functional, number of ink cartridges: 8, color channels: CMYK + Primer + Clear + White + White, number of print heads: 2, resolution (max.): 1,200 dpi, paper width (max.): 2,500 mm, paper height (max.): 1,300 mm, total length: 4,400 mm, total width: 2,450 mm, total height: 1,250 mm, counter reading (black): 3,023, year of last overhaul: 2026, type of input current: three-phase, input current: 16 A, input voltage: 400 V, Mimaki JFX200-2513 UV-LED Flatbed Printer (Model 2020) Ksdpjzt Dmrefx Abnsdr Professional UV-LED flatbed printer from a single owner – in top condition & serviced annually by a specialist company. For sale is a well-maintained Mimaki JFX200-2513 UV-LED flatbed printer from 2020. The machine comes from a single owner and has only been used in a professional environment. It was exclusively used to print on glass using printing stencils. To guarantee maximum operational reliability and perfect print quality, the system has been serviced annually by the renowned specialist company ESC. All print heads are in good condition (see nozzle test). The last check, including the replacement of wear parts, was carried out by a specialist company in July. Technical data & operating hours (values read from the interface): Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Operating hours (Use Time): 19,409 h Printed length: Print Length: Only 3,023 m, Print Area is currently only 5142m² UV lamps (LED): 2 UV-LED lamps (Note: Extremely long-lasting UV-LED technology) Printing area: 2,500 mm x 1,300 mm (up to 50 mm media height) Ink configuration & special features: Ink type: Mimaki LUS-120 (Excellent adhesion and flexibility on rigid and flexible media) Color configuration: CMYK + Primer + Clear (Varnish) + White + White Your advantage: The double white configuration provides extremely high opacity and speed when printing undercoat or overcoat. The integrated primer and clear varnish enable smart finishing options (spot varnish/textures) and printing on demanding materials such as glass, metal, or acrylic. Accessories & highlights included in the scope of supply: Including a powerful suction fan (vacuum add-on): Keeps even uneven or lightweight sheet materials perfectly flat on the printing table. Transport securing device available: The original transport securing device for safe shipping is fully available. Location & removal: Easy logistics: The hall has a large roller shutter door, which makes the removal for a specialist shipping company or a service company easy and straightforward on the ground floor. Inspection and test print can be arranged at the location. Price is net, plus VAT. Errors and prior sale reserved. This offer is exclusively aimed at commercial businesses and freelancers.

Condition: good (used), Year of construction: 2012, Exposé for Hall Rental Production and assembly hall ready for occupancy Fully equipped - 850 m² - Compressor system available - 40.0 t overhead crane (2 x 20 t rotating cranes) - 10.0 t overhead crane Kodjygkinopfx Abnsdr - 5.0 t gantry crane - 20.0 t overhead crane - 12.5 t overhead crane - Millutensil MIL303 spotting press - Crane hook height: 7 m - Truck entrance gate height: 4.5 x 5 meters - Workshop trolley with tools and lifting gear available - Foreman’s office and meeting room with air conditioning - Ladies and gents restroom - Lathe and grinding machine available - Fiber optic connection available (contract with Telekom possible) Available for immediate rent Location: 35232 Dautphetal, Industriestr. 9 Viewings by appointment possible

Condition: ready for operation (used), For sale Steel warehouse, approximately 600 m2 Kdjdpfxszk Hwue Abnsr Triple Romney warehouse with office space. This versatile storage warehouse offers ample storage space and includes an internal office area, making it ideal for various business activities. The warehouse is equipped with large access doors, which facilitate loading and unloading. Entirely self-supporting steel structure. Depth: 20.1 m Width: 30.1 m Area: 600 m2 Three warehouses, connected to each other without intermediate walls. Height: 5.5 m Clear door height: over 4 m This warehouse will be dismantled before the end of July; all materials will be packaged and prepared for transport.

Condition: good (used), functionality: fully functional, Characteristics: * Length: 40 m Kedpfx Abswbtayenodr * Width: 20 m * Height (center): 10.2m * Height (side): 6 m * PVC roof: 850 gr/m2 Description: Aluminum profile building of 800 m² with PVC roof. The building is equipped with a control cabinet, 6 electric air heating units (with temperature control), lighting and several outlets 220/380. Furthermore, there are 2 electric overhead doors. The building is demountable and can be expanded if required.

Condition: excellent (used), Year of construction: 1999, machine/vehicle number: NOH603/47, Stahl P300 Olympia Stahlbau bridge crane, gantry crane, crane system, crane runway, hall crane Dimensions approximately 12 x 5.6 m Load capacity / lifting capacity 250 kg 1 bridge crane with 250 kg load capacity and chain hoist – gauge 5.33 m Technical data of the system: Total crane height approx. 4.42 m Kedpozdbrhsfx Abnsdr Top of rail to top of rail approx. 4.42 m Bottom of rail to bottom of rail approx. 4.18 m Bottom of bridge to bottom of bridge approx. 3.87 m Hook height approx. 3.25 m Gauge approx. 5.33 m Total width approx. 5.57 m External dimensions of the steel structure (space requirement) 12 x 6 m System is delivered complete: Steel structure / crane runway, free-standing, made of 140x140 mm square tubing + IPE240 runway rails + power supply 1 bridge crane, 250 kg load capacity incl. chain hoist Base plates 30x30 cm Crane is disassembled and immediately available, transport length 12 m!!!! Item location is 75053 Gondelsheim Inspection book with EC declaration is available Very good condition, see pictures Shipping via freight forwarder or collection by appointment only.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, PRICE REDUCED AGAIN!!!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, and also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft. This would certainly be of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is set up, except for the computer, which is a newer, smaller-form-factor HP model. Max. diameter: 350mm Max. test piece height: 500mm (higher measurements are possible, up to a maximum of 1000mm when measured in two halves...) Self-centering of the workpiece: +/- 5mm Max. weight of test piece: 40 kg The system has been used very little and has had only two owners. The first owner, from whom I purchased it, was an implant company in Hamburg. It was used in a "medically clean environment" and is extremely clean. It was never located in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password...). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. There is also a sample/sample lens (hemisphere) for calibration! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! The system will be shipped on two Euro pallets using a freight carrier. It is already securely fastened to the pallets. The Talyrond 265 and the desk will be well-protected with bubble wrap, etc., and secured with stretch film for transport. The system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is now recommended after a few years. Mistakes can be made during assembly and commissioning. For example, some locking screws are installed for transport; if you forget to remove them, the system could be damaged when it starts up. A truly well-maintained, very accurate system that will provide excellent service for many years to come!! Kjdpfezcqy Eox Abnodr

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, total width: 2,000 mm, total length: 3,690 mm, total height: 8,350 mm, For sale: A robust industrial steel platform staircase with four levels, suitable for use in production halls, factories, and technical installations. The structure consists of multiple landings with fixed stairs and is made of steel, equipped with safety railings (yellow) around the platforms. The staircase is designed for intensive industrial use and provides safe access to higher installations or machinery. The construction is freestanding, stable, and suitable for fixed installation on a concrete floor. Specifications: Type: Industrial platform staircase / work platform Material: Steel Number of levels: 4 Total height: approx. 8.35 meters Landing heights: 1st level: approx. 1.81 m 2nd level: approx. 3.60 m 3rd level: approx. 5.40 m 4th level: approx. 7.22 m Width: 200 cm Length: 396 cm Staircase length (diagonal): approx. 3.96 m Design: fixed stairs with intermediate landings Kdedpfx Asyf Un Sobnor Safety features: railings around the platforms

Condition: good (used), Year of construction: 2014, Set of 4 modular office units, room-in-room system, two-story, including staircase, approx. 139m2 – used: Price ex-works: €19,950 (net), disassembled, packed, and loaded! Item no. 11: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, likely 2014 Roof accessible, with a maximum load capacity of 100kg Element width: approx. 1.03m Length including staircase: total approx. 14.51m Width of “gap” for the staircase: approx. 1.27m Right block, top and bottom: Length: approx. 4.60m (4 elements and one narrow element) Left block, top and bottom: Length: approx. 8.64m (8 elements) Depth approx.: 5.28m (5 elements) Ground floor height: approx. 2.70m Total height approx. 5.40m 4 doors Kodpfx Abezqzuusnedr All offices are closed on three sides and therefore stand with one side against the hall wall Includes lighting, etc., as available Ground floor without flooring, upper floor with flooring Sale excludes furniture, etc. Condition: good Available: from approx. Q4 / 2026 Location: Hamburg

Condition: used, functionality: unexamined, Year of construction: 1978, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 400 mm, roller diameter: 622 mm, rotational speed (min.): 2 rpm, rotational speed (max.): 4 rpm, rotational speed (distance/time): 4,900 mm/min, pipe diameter (max.): 254 mm, tube wall thickness (max.): 10 mm, overall weight: 22,000 kg, total length: 3,900 mm, total width: 2,600 mm, total height: 3,300 mm, Equipment: emergency stop, BOLDRINI BSA 40 – Heavy-duty profile bending machine / roll for profiles For sale: a heavy-duty industrial profile bending machine, model BOLDRINI BSA 40, manufactured by BOLDRINI S.p.A., Italy. The machine is designed for bending and rolling metal profiles, tubes, angle profiles, rails, flanges, T-profiles, double T-profiles, and other structural elements with a large radius. It is suitable for the production of metal structures, halls, shipbuilding, tubular structures, tanks, flanges, and heavy industrial fabrication. Key data: Manufacturer: BOLDRINI S.p.A. Model: BSA 40 Year of manufacture: 1978 Serial number: 5936 Machine type: profile bending machine / angle bending roll / section bending machine Working system: 3 rollers Control: manual / electromechanical Drive: electric Weight: approximately 22,000 kg Kdodpezilzvjfx Abner Condition: used, stored outside of a production line Available tools: set of rollers, dies, segments, and additional attachments, as shown in the pictures Approximate capacity according to model BSA 40: Angle profile: up to approximately 203 x 203 x 25 mm Tubes: up to approximately Ø254 mm Suitable for: tubes, L-profiles, T-profiles, double T-profiles, rails, flanges, and profiles with a large radius Equipment and features: The machine has a robust, heavy-duty construction, large working rollers, and mechanical adjustment via screw spindles. Working rollers, profile dies, additional segments, and attachments for various types of profiles are available. The electrical panel is present and includes contactors, relays, fuses, a transformer, terminal blocks, and controls. The machine has not been tested under load at the moment. Visible surface corrosion is present on some of the rollers, tools, and housing due to outdoor storage. An on-site inspection and electrical/mechanical check are recommended before commissioning.

Condition: excellent (used), functionality: fully functional, Year of construction: 1983, machine/vehicle number: MBR 1000Kg, Demag ELKE overhead crane, bridge crane, industrial crane Kdsdpjzffmdofx Abnsr Crane available in duplicate!!! Year of manufacture 1983 + 1985 Load capacity / lifting capacity 1 ton - 1000 kg Gauge 6700 mm, overall dimensions approx. 6800 mm With floor control and fine positioning Demag PLV82NF wire rope hoist 1000 kg Lifting height 4.5 m Overall height from top of crane to hook approx. 650 mm Head beam length with buffer approx. 140 cm Crane is dismantled and immediately available Good used condition Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, machine/vehicle number: CR2340 89/221260, Demag ELKE bridge crane, overhead crane, crane, crane system, crane runway Kdjdpfszf Uphjx Abner Payload / lifting capacity: 3.2 - 3200 kg Track gauge: approx. 14,000 mm, overall width: approx. 14,200 mm With floor control and fine positioning Demag PLV168 wire rope hoist, 3200 kg Lifting height: 6 m Overall height from top of crane to hook: approx. 1100 mm Head beam length with buffer: approx. 220 cm Crane is dismantled and immediately available Good used condition We also have pillar-mounted jib cranes and wall-mounted jib cranes available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping via freight forwarder is possible, please inquire with your postal code. Pickup is preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD239, ABUS overhead crane runway bridge crane hall crane crane Load capacity / lifting capacity: 1t - 1000kg Track gauge: 6550mm, external dimension approx. 6700mm Year of manufacture: 1989 with floor control Lifting height: 6m Hoist: GM810 F6 Construction height from top edge of crane to hook approx. 610mm End carriage length with buffer approx. 220cm Includes: 10m HEB160 running rails and 10m conductor rail The crane is dismantled and immediately available. Very good condition, inspection book available. Kdedpfxsxmuu To Abnsr Pillar and wall-mounted slewing cranes are also available, as well as Demag KBK and Abus HB systems, in addition to Errikla, Hadef, Stahl KT 2000, etc. Shipping via carrier possible, please inquire with postal code Collection preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: CR2431 90-240381, Demag ELKE bridge crane, overhead crane, crane, crane gantry, crane runway Load capacity / lever load: 3.2 - 3200 kg Gauge: approx. 12,200 m, overall width: approx. 12,400 mm Kdodpfszf Upbex Abner with floor control and fine positioning Demag DH hoist 3200 kg Lifting height: 6 m Overall height from top of crane to hook: approx. 1050 mm Head beam length with buffer: approx. 220 cm Crane is disassembled and immediately available. Good used condition. Column-mounted swivel cranes and wall-mounted swivel cranes are also available. Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by freight forwarder is possible, please inquire with your postal code. Collection preferred.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: CR2344, ABUS crane system, overhead crane, gantry crane, workshop crane Load capacity / lifting capacity: 2t - 2000 kg Track gauge: approx. 14,000 mm, overall dimensions: approx. 14,200 mm Year of manufacture: 2008 (rebuilt with new chain hoist, floor control, cable track and drive units) Abus GM chain hoist, 2000 kg lifting capacity, 6 m lifting height Overall height from top of crane to hook: approx. 950 mm Head beam length with buffer: approx. 220 cm Crane is disassembled and available immediately Very good condition, inspection certificate is available We also have pillar-mounted swivel cranes and wall-mounted swivel cranes available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Kjdpozgbypsfx Abnjdr Shipping via freight forwarder is possible; please inquire using your postal code. Collection is preferred.

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, approx. 150 m2, several rooms – used: Price ex location: €19,500 (net), disassembled, packaged, and loaded! Item 8: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Roof accessible for personnel, max. load 100 kg Element width: approx. 1.03 m Kjdpfx Aezqzyqebnsdr Length: approx. 21.40 m Depth: approx. 7.60 m, or 8.10 m (6-7 elements) Height: approx. 2.96 m Several doors All offices are enclosed on three sides and are therefore positioned with one side against the hall wall. Includes lighting, etc., as available. Without flooring. Sale excludes furniture, etc. Condition: good Available: from approx. Q4/2026 Location: Hamburg

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: K118, Demag / Cranetool Stahlbau Gantry Crane Crane Sky Crane Runway Dimensions approx. 20.3 x 5.2/7.55m with bridge crane Width with 2 protruding posts + 150 + 80cm Payload/lifting capacity 2500 KG Technical data of the system: Crane track/steel construction consisting of HEA240 HEB220/260 HEM240 - beam Upper bridge 6.45m UK bridge 6.1m Top rails 6.06m UK rails 5.84m Hook height 5.45m Track width 4.96 m Kdsdpfomkfulox Abnor Total width outer edge 5.2m / 7.55m Inner edge of steel construction 4.96m Base plate steel construction 43x35 + 60x60cm Support spacing 9.5+10m The system is delivered complete: Steel construction with power supply 1 bridge with 2500 kg Demag DC-Com chain hoist BJ 2017 !!! Documents are available, more pictures on request. Crane is dismantled and available immediately The location of the article is 75053 Gondelsheim Very good condition, see pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: good (used), Year of construction: 2014, Storage offices, room-in-room system, approx. 26m2 – used: Price ex works: €3,950 (net), disassembled, packaged, and loaded! Item 2: Manufacturer: Kleusberg Type: Systemraum Trendline Year of manufacture: unknown, presumably 2014 Roof is walkable with a maximum load capacity of 100 kg Element width: approx. 1.03m Length: approx. 6.31m (6 elements) Depth: approx. 4.24m (4 elements) Kedpfx Abezqz A Ejnjdr Ground floor height: approx. 2.96m 1x door All offices are enclosed on three sides and therefore stand with one side against the hall wall. Without flooring Condition: good Available: from approx. Q4 / 2026 Location: Hamburg