Used Halls for sale (325)

Condition: new, Electrostatic air filter for air-handling systems - central exhaust ELBARON - RON 15 S oGk – 15.000 m³/h – 230 V – without fan Max. Air flow rate: 15,000 m³/h Total power consumption*: 3 x 0.02 kW Operating voltage*: 230 V, 50/60 Hz, 1PH + N + PE Dimensions L/W/H in mm: L 701 / W 1020 / H 1945 Colour: RAL 7035* Weight: 445 kg Manufacturer: ISI Industrieprodukte GmbH *Special voltage or special colour on request The application: The ELBARON duct air filter series were designed for central air filtration in production halls as well as for plant and building technology. Your advantages: - 15 unit variants available - Direct from the manufacturer - High filtration efficiency - Modularly expandable - Easy maintenance - Low follow-up costs due to reusable filter media Bedpfx Aeh Rfccjb Tjdk - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Also available as mirror-image version - Robust construction - Quality Made in Germany Based on our filter technology, which has been tried and tested for years, this filter unit can be used as a central air filter unit in ventilation ducts. ELBARON technology reliably filters aerosols, oil mist, emulsion mist and smoke from the air. This way, the air in your production hall is cleaned effortlessly. Our air filter can also be easily integrated into central systems for machine extraction. ELBARON filter units protect downstream heat exchangers or air conditioning units from premature contamination. ELBARON filter technology is based on environmentally friendly electrostatic particle ionisation. This makes our filter units the ideal solution for large production plants due to their high separation efficiency, large capacity and easy maintenance. Take advantage of the enormous potential of ELBARON duct air filters with low maintenance costs. All our electrostatic filter cells and filter media are effortless to clean and reuse.

Condition: new, Year of construction: 2025, functionality: fully functional, Our SAPI Blasting Halls SAPI sandblasting halls and systems with 50 years of tradition and proven quality. Sandblasting halls are designed for industrial and commercial use, providing a safe environment for all types of blasting work. They include a blasting room, an abrasive recovery system with a filter and dust extraction system, lighting, and safety features to ensure the safety of the operator. Recovery System Our recovery system collects, separates, and reuses the abrasive material, which reduces costs and environmental impact. Ventilation and filtration systems ensure that the air in the hall remains clean. Adequate lighting ensures optimal visibility for the operator. Key Components of Our SAPI Sandblasting Halls: ✅ Blasting Room: The central area where the actual sandblasting takes place. 🌬️ Ventilation and Filtration Systems: Reduce dust levels and ensure optimal visibility. 🔄 SAPI Recovery System: Recycles the abrasive material and reduces costs and environmental impact. 💡 Lighting: Ensures optimal visibility for safe operation. 🦺 Safety Features: Emergency shutdown, fire protection, and protective gear like helmets, overalls, and gloves. ⚙️ Control Panel: The control center that integrates all electrical components. 🗑️ Dust Collection Container: Collects fine abrasive material for easy disposal. 🛠️ Compressor: Powerful compressor for the compressed air supply. 💪 Mammut Sandblasting System: Designed for tough industrial use. Reasons to Choose Our Sandblasting Halls: ✅ High Efficiency: Increases productivity and reduces operating costs. 🛡️ Safe and Clean Environment: Minimizes environmental impact and ensures a safe working environment. ⚙️ Customizable Solutions: Tailored solutions for optimal performance. 🔧 High-Quality Components: Durable components that reduce maintenance needs. 🛠️ Support and Service: Expert support for quick problem-solving. 🌱 Environmental Responsibility: Reduces waste and environmental impact. The SAPI Flat Conveyor System: The abrasive material is processed by our efficient abrasive cleaner, which separates contaminants. The system is low-maintenance, operates without interruption, and consumes very little energy. It is easy to retrofit and can be installed on existing hall floors with minimal foundation work. Advantages of Our Flat Conveyor System: ✅ Low installation depth, retrofit-compatible with existing blasting rooms 🔇 Low noise and friction Bodpjun R N Asfx Ab Tjdk ⚡ Very low energy consumption 🏗️ Very low wear, as only rubber is used 🚧 Very low installation height

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: WIL190, Demag EEPOS Gis Hall Crane Portal Crane Bridge Crane incl. Steel Structure + Floor Control Steel structure approx. 15.35 x 7.2 m with EEPOS ALU crane runway, equipped with two bridges, each with a payload of 350 kg Payload/lifting capacity of the crane: 2 x 350 kg Incl. 1 x Gis chain hoist 500 kg + 1 Demag DC chain hoist NL 250 kg, year 2023! Technical details of the system: - Crane runway/steel construction made from HEA180 beams - Length, outer edge of steel structure: approx. 15.35 m - Total width, outer edge (steel structure): 7.2 m - Inner edge of steel structure: 6.83 m - Total height of steel structure/crane: approx. 5.03 m - Column height: approx. 5.03 m with base plate - Bottom edge of purlin: 4.83 m - Top edge of bridge: approx. 4.32 m - Bottom edge of bridge: approx. 4.02 m - Hook height: approx. 3.65 m - Track gauge: approx. 5.5 m - Rail length: approx. 17 + 19 m - Bridge length: approx. 6.4 m Column spacing: see drawing (6.85 m + 8.5 m) System is delivered complete: - Complete steel structure with columns - EEPOS aluminium crane runway incl. 2 chain hoists (profile type XL+V) Bsdpfexcg Dlex Ab Tjdk Crane is dismantled and immediately available Location: 75053 Gondelsheim Very good condition, see photos Shipping via freight forwarder or collection only by appointment

Condition: good (used), Year of construction: 2016, operating hours: 6,041 h, suction capacity: 4,000 m³/h, negative pressure: 3,000 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: TEKA Model: Filtercube 2H Year of manufacture: 2016 Operating hours: 6041 Filter cleaned with a microprocessor controller with compressed air pulses during operation, which ensures high efficiency of the device. Low demand for compressed air thanks to the "Power-Spray" system Bedpfx Ajtpvcysb Todk The central Filtercube filter ventilation device equipped with cartridge filters is an ideal solution for almost all problems in the area of fume and dust filtration. Fan on the clean side, which reduces the risk of explosion to a minimum. Application: central exhaust system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general filter ventilation of the hall (push-pull system, displacement system) extraction system in combination with an exhaust table extraction system for grinding non-explosive materials Parameters: Fan in a sound-absorbing enclosure with a power of 3 kW. Capacity 4000 m3/h Negative pressure 3000 Pa Inlet diameter: 315 mm Filtration surface: 50 m2 control cabinet technical documentation Possibility to order new filter inserts tailored to the customer's needs.

Year of construction: 2016, condition: as good as new (ex-display), Round industrial tent, brand SUIHE, new, model: XL-308515R, year of manufacture 2016 Dimensions: width 9.15 m x length 26 m x height 4.57 m Structure: galvanized steel structure, Φ60*1.8mm and Φ40*1.5mm, made of Q215 steel tubes, according to GB/T700-2006 standard. Tarpaulins: PVC material thickness 300g PE, double fabric covered with PVC, factory colors: green or white. Access door type: simple mechanical door Door dimensions: 3.5 m x 3.5 m Snow resistance: 2.28 kpa (Compressive stress at a deformation) Wind resistance: 80km/h Standard duration of use: more than 15 years. Uses: industry, agriculture, material storage, car storage, hangar, Increased resistance, easy to assemble and disassemble, large capacity, excellent stability. Bedpfxji Hc Dre Ab Tjdk The tent material is green with white. Model dimensions in meters: XL-308515R 9.15*26*4.59 (W*L*H (m)) 300g PE Metal box packaging Transport metal box dimensions 2.95m*0.75m*1.18m Tent weight: 1300kg Use of SUIHE industrial tents: 1. Agriculture: shelter for animals and storage space for hay. 2. Aviation: hangar for planes 3. Space for storing machines, industrial equipment, temporary hall 4. Navy: ship storage, containers 5. Garage for vehicles etc. PRICE 8.500 Euro + VAT, negotiable, FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2025, 3000 kg Platform Scale – A Professional Warehouse Scale for Large and Heavy Loads The 3000 kg platform scale is a robust and precise device designed for use in demanding warehouse, production, and logistics environments. With a large steel platform measuring 120 x 120 cm and a load capacity of up to 3 tons, it allows for weighing both standard pallets and large industrial components, containers, or heavy machine parts. It’s an indispensable tool for daily operations, enabling fast, accurate, and repeatable weight measurements of various types of cargo. Bdedpexay Hbefx Ab Tjk Durable Construction and Reliability for Everyday Use The platform is made from high-quality steel, ensuring long-lasting durability and resistance to heavy use. Its anti-slip, ribbed surface enhances safety—keeping loads stable even under maximum weight. The low profile design (10 cm height) allows for easy loading using a pallet jack or forklift, while adjustable feet ensure perfect leveling on any surface. This makes the scale suitable for modern warehouses with flat floors as well as production halls where minor floor unevenness may occur. Technical Specifications: Platform dimensions: 120 x 120 cm Structure height: 10 cm (adjustable by approx. 4–5 cm) Maximum load capacity: 3000 kg (3 tons) Readability/accuracy: 0.5 kg (500 g) Sturdy steel platform with anti-slip surface Precision and Ease of Use The platform scale is equipped with high-precision load cells that ensure reliable readings, even under full load. With a readability of 0.5 kg, the scale is suitable not only for heavy-duty weighing but also for quality control processes where precise weight measurements are crucial. The electronic display with an intuitive control panel allows for quick result reading, significantly improving operator efficiency and reducing the risk of errors. Applications in Logistics and Industry: This 3000 kg warehouse scale has a wide range of applications across multiple sectors. It’s ideal for: Incoming and outgoing shipment checks Weighing pallets before transport Inventory management in warehouses Quality control and production monitoring Handling in distribution centers and wholesale facilities This device enhances work efficiency, saves time, and ensures accurate weight measurements essential in logistics, trade, and heavy industry. Why Choose the 3000 kg Platform Scale? By investing in a professional electronic scale for pallets and loads, you’re getting equipment that will serve you reliably for years. Its durable steel construction, high load capacity, and precise load sensors make it suitable for even the most demanding working conditions. Thanks to the universal platform dimensions and stable design, the scale is practical, easy to operate, and simple to maintain. NOTE: Pallet not included in the set.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, power: 650 kW (883.75 HP), Woodchips fueled air heater. For grain kilns or industrial halls. Fully automatic with ignition. Have wery low hours- used only 2 seasons. Last 11 years stayd in dry room. Hydraulically driven grates for best burning process. Has hydraulically driven storage, fan and all includings. Automatical ash conveying. Bedpfxewxq D Rj Ab Todk

Condition: used, Year of construction: 2010, mileage: 1,081 km, power: 15 kW (20.39 HP), first registration: 04/2010, overall weight: 1,787 kg, fuel type: electric, color: red, axle configuration: 4x2, maximum load weight: 1,080 kg, empty load weight: 707 kg, brakes: other, driver cabin: other, gearing type: other, emission class: none, number of seats: 1, * German vehicle * Condition see photos * Ideal for large halls, parking garages etc... * Original only 1081 operating hours * Ideal for operation in large halls, logistics and parking garages as no exhaust fumes due to electric drive * Compact high-performance scrubber-drier for wet scrubbing and dry vacuuming in one operation * Combination machine with additional sweeping system, with dust extraction. * Hako B1100 sweeping and scrubbing machine * Area performance max. theoretically up to 7,000 m2 /h * Wet cleaning unit * Working width of brush head 102 cm * Brush diameter (2 brushes) 53 cm * Brush speed 210 rpm * Brush motor (2 pieces) 2 x 700 W * Brush contact pressure up to 540 N * Suction foot (working width) 126 cm * Fresh/dirty water 185/185 liters * Sweeping suction device: * Working width 138 cm * Electrical equipment * Rated voltage 36 V * Drive battery 36 V/640 Ah5 PzS * Drive motor 2000 W * Travel speed up to 8.0 km/h * Sweeping suction ? Fine and coarse dirt are picked up cleanly in the dry area in front of the scrubbing unit. * Wet scrubbing ? Even the toughest incrustations are removed cleanly by the rotating disk brushes * Dry vacuuming ? The pendulum-suspended, parabolically shaped squeegee leaves the floor immediately dry and ready to walk and drive on * Large tank capacity ? Long working times and short set-up times thanks to the flexible wall between the fresh and dirty water areas. * Dirt/water treatment system for multiple use of the water used for cleaning. ? Consistent cleaning quality in conjunction with the detergent dosing system. ? Enormous reduction in set-up times and water consumption. ? Optional use of fresh water or treated waste water. The fresh water tank always remains clean If new TÜV approval is required, we will be happy to provide you with a quote from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. Bdedpfx Aevhqiysb Tsk You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Year of construction: 1996, condition: excellent (used), machine/vehicle number: MBMA101, Abus / Hert - year of manufacture 1996 / conversion 2014 1-girder suspension crane, bridge crane, crane track, hall crane, gantry crane Payload 1000KG Crane is available 2x: Chassis can be adjusted to the carrier size up to approx. 10-16cm. Incl. complete control, floor operation using a control bottle Bdsdsqqhf Dopfx Ab Tek 2 lifting speeds, 2 strands All cranes can be moved completely electrically in all 3 axes Lifting height/hook travel approx. 6m Connection to 400V 16A, built in 1996 Very good used condition Shipping by courier, collection preferred Location 75053 Gondelsheim Please inquire about shipping prices according to zip code, we will make you an immediate, non-binding offer!

Condition: ready for operation (used), Year of construction: 2016, Support profile: IPE 180, upright load per upright side: 4.8t, cantilever arm load: 1.03t, arm length: 600mm. For the storage of heavy, bulky materials and goods, universally applicable in halls, for manual or automatic operation, stationary or mobile installation possible, single-sided or double-sided racks, bolted cantilever arms, robust design, bolted upright construction, bolting system: support profiles are bolted with longitudinal ties to form rack rows and braced with cross ties in every 4th rack bay. An on-site inspection is possible, the rack has already been dismantled. Bodpfx Abjw U Uags Tjdk

Year of construction: 2022, condition: as good as new (ex-display), Air handler with EC technology for hall air conditioning or heating, cooling capacity in combination with a chiller unit: 150 kW at 7/12°C, heating capacity 300 kW, airflow 20,000 m³/h, 4x500 mm air outlets, compact design. Bdjdpfx Aofzrgysb Tsk

Condition: good (used), Electric cart mover Power Attack MTC 30 CC Device in very good condition. Ideal for transporting heavy goods, machines, boats, etc. After inspection, brand new batteries 2 pcs, new tires, charger, hook, fastening element with transport rollers included. Manufacturer’s description: Thanks to our compact electric towing tractors, you can efficiently transport heavy loads weighing up to 25 tons. These efficient transport devices are characterized primarily by the fact that they are emission-free, quiet, compact and efficient. Therefore, they are particularly suitable for internal use in warehouses and production halls. Product features: Pulling force 30 t Bdedpjwunl Dofx Ab Tek Length: 1650 mm / double telescopic Roller width: 380 mm Weight: 70 kg

Year of construction: 1999, condition: good (used), COMPLETE DAIRY - in full production function We offer for sale a complete dairy for the production of consumable, pasteurized milk, yogurt, kefir, cream and cheese (fresh and sliced cheese) Capacity: 15 – 20,000 L of milk/day Milk is packed in PVC bags of 1.0 L - capacity 2,400 pcs/h Yogurt is filled in: - large glasses 410 gr - capacity 3,000 pcs/h - small cups 180 gr - capacity 3,000 pcs/h - PET bottles 0.5 and 1.0 L - capacity 1,000 pcs/h Kefir is filled in PET bottles 05 and 1.0 L, capacity 1,000 pcs/h The cream is filled in: -bowls 1000 gr - capacity 3,000 pcs/h - large glasses 410 gr - capacity 3,000 pcs/h - small cups 180 gr - capacity 3,000 pcs/h Cheese is filled in: - buckets of 5 and 10 kg - fresh cheese -vacuum foil - fresh and white cheese slices 500-1,000 gr Equipment specification - manufacturers from Italy - Slovenia and Serbia Reception line Digital meter with foam remover, 2014 Tank horizontal (lactofreeze) 3,200 L cooling on freon - 3 pcs Tank vertical 3,000 L – 2 pcs Pasteurization line Pasteur (flow-through) with retainers 2,000 L Separator (self-cleaning) 2,000 L Homogenizer 2,000 L The equipment is adapted to the capacity and made to order Manufacturer Scremac Italy 2000 years. Bdjdek I T Siepfx Ab Tek Fermentation line Duplicator 2,000 L – double wall insulated with planetary mixer 2010. Duplicator 1,000 L – double wall insulated with planetary mixer 2010. Filling lines Two-row automatic filling machine for filling cream into bowls Automatic filling machine for filling cream and yogurt per 410g, 2014. Automatic filler for filling yogurt and cream 180gr, year 2008. Filler - capper - dater - automatic packing tunnel Fills 1.0 L and 0.5 L bottles, 2016 Filling machine for milk and yogurt in PVC bags 2400 pcs/h. Original French manufacturer, older year. Videojet - automatic date marker, - 2 pcs Cheese tub insulated with HARFO 1,600 L, 2008. Triblender 500 L for the reconstruction of powdered milk, 2015. Vacuum cleaner for fresh and white cheese slices Ice water pool (STAINLESS STEEL VESSEL) 10,000 L, FREON cooling, manufactured by KOTA-Slovenia, year 2000. A new compressor has just been put on it. Chip for washing 3 x 2,000 L, automatic, year 2010. Semi-automatic PET bottle blower 1.0 and 0.5 L with Boge compressor, year 2010. Complete cooling system for cooling the warehouse of finished products, and the same is programmed for heating and cooling the fermetal chamber, year 2010. manufacturer KOTA-Slovenia, with 3 engines Mini (drive laboratory) Solid fuel boiler (wood) 250 kW Mono-pump All equipment is connected by pipe fittings and pumps for operation. The start of the dairy: 1999 The equipment is in full production function and can be seen in operation It is regularly serviced and maintained - the last service was performed 6 months ago Installed power 50 kW Solid fuel - wood - is used as energy Required hall size: 500 m2, height 4 m 16 workers work in the dairy The complete dairy is for sale, not in parts.

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, operating hours: 1,430 h, load capacity: 1,600 kg, lifting height: 5,200 mm, free lift: 1,800 mm, construction height: 2,350 mm, battery capacity: 465 Ah, battery voltage: 24 V, fork length: 1,150 mm, Stöcklin EFI 1600 Sit-down pallet stacker with initial lift. Perfect condition. Lifts 1600 kg. "2-in-1 machine" It can be used for daily handling of pallets up to 2000 kg, which can be lifted on the first lift. And in addition, it can be used as a stacker when you need pallets in racks or similar. Load capacity on forks: 1600 kg. With the initial lift, you can drive over uneven surfaces, e.g. level difference between 2 halls, door opening with drop, etc. In addition, you can drive with 2 pallets at the same time. Bodpsu T Ecasfx Ab Todk Very easy to maneuver, nice ergonomic driving position and easy to get on and off. The machine is in perfect condition. Lifting height: 520 cm. Building height: 235 cm. (With lowered undercarriage) Year: 2001 Opening hours: 1430 Large battery: 24V 465Ah Battery year: 2021. measured remaining battery capacity: 96% Charger included. Transportation can be arranged.

Condition: used, machine/vehicle number: 0940, without hall piping Bodpfx Aborz Iq Ho Tjdk

Condition: good (used), Reznor UDSA gas air heater UDSA gas warm air heater - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. Bdsdpfx Aswb A Hijb Tok UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation with CE system certification, version B or C Compact design for easy installation even heat distribution Vertical and horizontal air guide fins as standard Modulation of the heat output up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may carry out the installation of the gas WLE and the gas and flue gas connections. The gas WLEs are suitable for : - Natural gas or liquid gas operation - Recirculated air operation - Intake temperatures below 5°C with stainless steel heat exchanger * - 1-stage or 2-stage heating operation* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outer wall, version C ° Gas WLE type: UDSA055-4E Gas appliance type: B22P-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 natural gas Connection pressure: 20 mbar Nozzle pressure: 8.40 mbar Max. Nominal heat load (Hs) QN: 66.04 kW Max. Nominal heat load (Hi) QN: 59.50 kW Min. nominal heat load (Hs) QN: 33.02 kW Min. nominal heat load (Hi) QN: 29.75 kW Max. Nominal heat output: 54.74 kW Min. nominal heat output: 26.92 kW Supply voltage: 230V 1N ,50Hz Air flow rate: 5830 m3/h Protection class: IP20 Pin no. 0461BN0677 Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: like new (used), Year of construction: 2021, functionality: fully functional, due to conversion of the machine hall or chip disposal, as good as new Mayfran chip conveyor system from 2021, suitable for Mazak HCN 500 horizontalBaz or possibly similar machines. the new price was well over 20,000. here now due to lack of space for 5999.- Bdedpfx Abetkui Ts Tjk

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 10,000 mm, total length: 9,000 mm, total height: 4,500 mm, Equipment: roof tent, NEW EQUIPMENT Our various sizes – please let us know which one you require: 6m Widths → 6.1m x 6.1m x 3.66m → from €2,599 → 6.1m x 9.15m x 3.66m → from €2,999 → 6.1m x 12m x 3.66m → from €4,499 → 6.1m x 18m x 3.66m → from €4,520 9m Widths (Arch Spacing 1m or 2m) → 9.15m x 10m x 4.5m → from €3,600 → 9.15m x 12m x 4.5m → from €4,149 → 9.15m x 16m x 4.5m → from €4,999 → 9.15m x 20m x 4.5m → from €6,799 → 9.15m x 26m x 4.5m → from €8,399 12m Widths (Arch Spacing 1.5m or 3m) → 12.2m x 12m x 6.1m → from €12,399 → 12.2m x 21m x 6.1m → from €17,999 15m Widths (Arch Spacing 1.5m or 3m) → 15.25m x 12m x 6.1m → from €14,899 → 15.25m x 21m x 6.1m → from €22,199 ☆ FINANCING OR LEASING AVAILABLE from €69.89 per month ☆ CERTIFIED PRODUCTS ☆ TRANSPARENT OFFERS ☆ INCLUDES GERMAN STRUCTURAL ANALYSIS ☆ INSTALLATION AVAILABLE ☆ OPTIONAL FIRE OR STORM INSURANCE ☑️ Genuine 750 g/m² PVC tarpaulin → more durable than standard products on the market ☑️ Extra sturdy and tear-resistant thanks to fabric reinforcement ☑️ High UV resistance ☑️ 100% waterproof ☑️ Extra strong, galvanized tubing for maximum stability ☑️ Suitable for year-round use ☑️ German customer service and support during purchase and assembly ☑️ Snow load: up to 130kg/m² (arch spacing 1m) and 70kg/m² (2m) ☑️ Wind load: up to wind zone 4 (1m) and up to wind zone 2 (2m) ☑️ Includes ground anchors, concrete anchors and all other small parts ☑️ Spare parts guaranteed ☑️ 5-year warranty on properly installed PVC tarpaulin ☑️ 10-year warranty against corrosion of steel frame ► Most models available for immediate delivery ► Colours: green or white ► Includes German structural analysis ► Gates at both gable ends ☏ Call us! We are happy to provide you with a non-binding offer with best price guarantee. THE IDEAL ALTERNATIVE TO TRADITIONAL CONSTRUCTIONS Optimal protection against wind, sun, rain, hail, and snow! ☑️ Mostly permit-free (unlike wooden, steel or sheet metal buildings) ☑️ No foundations required ☑️ High stability and safety (certified by German engineering office) ☑️ Decades of use: high quality, warranty, and spare part availability ☑️ Robust, corrosion-free framework ☑️ Various shapes, colours, and sizes VERSATILE APPLICATIONS ☑️ For agriculture, forestry, industry, commercial, and private use ☑️ Storage space for goods, materials, or machinery ☑️ Garage / carport for trucks, motorhomes, boats or yachts ☑️ Workshop within the lightweight hall ☑️ Construction site roofing ☑️ Shelter or stable for livestock ☑️ Barn for straw, hay, and wood Bdodpfoudwfnox Ab Tek ☑️ Greenhouse for plants ! Prices include structural analysis ! Delivery and installation available *Images similar • Prices & colours may vary • All prices subject to change • Please request a non-binding quote for an exact price • Available while stocks last • Non-binding offer

Year of construction: 2018, condition: excellent (used), AGGREGATE for a refrigerator with evaporators and condensers - Bedpfxsttq E Ee Ab Tsdk currently installed in a hall with an area of ​ 5,000 m2, with a cooling temperature regime of 4 to 8 °C, intended for the storage of fruits and vegetables. Please contact us for full technical specification. Thank you!

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,174 h, load capacity: 1,600 kg, lifting height: 3,400 mm, free lift: 1,800 mm, load center: 600 mm, construction height: 2,300 mm, battery capacity: 270 Ah, battery voltage: 24 V, fork length: 1,150 mm, Stöcklin EHI 1600-P Pallet stacker with base plate, initial lift and power steering. Perfect condition. Lifts 1600 kg. "2-in-1 machine" It can be used for daily handling of pallets up to 2000 kg, which can be lifted on the first lift. And in addition, it can be used as a stacker when you need pallets in racks or similar. Load capacity on forks: 1600 kg. With the initial lift, you can drive over uneven surfaces, e.g. level difference between 2 halls, door opening with drop, etc. In addition, you can drive with 2 pallets at the same time. Very easy to maneuver, nice ergonomic driving position. The machine is in perfect condition. Bdodpfx Abou T Edqo Tok Lifting height: 340 cm. Building height: 230 cm. (With lowered undercarriage) Year: 2006 Hours: 2174 Battery: 270 Ah with 58 % remaining capacity. incl. charger. Transportation can be arranged.

Condition: new, Year of construction: 2025, A mast trolley with an electric drive, a load capacity of 1,500 kg and a lifting height of 3,500 mm, is an ideal warehouse device for transporting heavy loads. Solid steel construction ensures stability when lifting. Polyurethane rollers facilitate movement on uneven surfaces. Thanks to this, the mast trolley allows you to quickly and safely move loads at various levels and in various conditions. Introduction to electric mast pallet trucks The CORMAK Q15E35 electric mast lift truck is a versatile and efficient solution for material handling and lifting to a height of 3.5 m. Thanks to its innovative design and advanced technology, this trolley is ideal for use in warehouses, production halls and distribution centers. Key advantages of a pallet lift truck with a capacity of 1,500 kg The technical specifications of this model include the ability to lift to an impressive height of 3,500 mm, which enables efficient manipulation of loads at various levels. The trolley's load capacity is 1,500 kg, which makes it an excellent tool for handling medium and heavier loads. Machine features A solid structure made of high-quality steel ensures greater stiffness and stability when lifting. Thanks to the use of a special system, the handle of the pallet truck allows the steering to be transferred directly to the wheel. Built-in rectifier. Lifting the forks to the maximum height without load - only 25 seconds! Maintenance-free motor with brushless technology. Battery charge indicator on the control box. Safety switch. Built-in controller protects the battery against discharge or damage. Sealed, maintenance-free AGM battery. WE DO NOT REQUIRE inspections during the warranty period. Technical parameters MAX LIFTING HEIGHT 3500mm CAPACITY 1500 kg CENTER OF GRAVITY 600mm FORK LENGTH 1150mm OUTER FORK WIDTH 570mm HEIGHT WITH FORKS LOWER 2330 mm HEIGHT OF RAISED MAST 4000mm HEIGHT OF LOWER FORKS 85mm TOTAL WIDTH 810mm TOTAL LENGTH 1745mm Bedpfxorh E D Us Ab Todk CLEARANCE 30mm TURNING RADIUS 1390mm TRAVEL SPEED WITH / WITHOUT LOAD 3.5/4 km/h LIFTING SPEED WITH/UNLOAD 140/200 mm/s LOWERING SPEED WITH/UNLOAD 120/100 mm/s HILL CLIMBING ABILITY WITH/UNLOAD 5/7% WORK BRAKE TYPE electromagnetic DRIVE ENGINE POWER 0.75 kW LIFTING ENGINE POWER 2 kW BATTERY VOLTAGE/CAPACITY 12V 75 I 120 Ah WHEEL MATERIAL Polyurethane LIBRA 586 kg

Condition: good (used), Reznor UDSA Gas Hot Air Generator Gas WLE Type: UDSA050-4E Bsdewb Axrjpfx Ab Tjdk Gas appliance Type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 58.60 kW Max. Nominal heat load (Hi) QN: 52.80 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 48.58 kW Nominal heat output: 48.58 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 5180 m3/h Protection class: IP20 Pin no. 0461BN0677 UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Vertical and horizontal air guide vanes as standard Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. Only an approved installation company may install the gas WLE and connect the gas and flue gas side. The gas WLEs are suitable for: - natural gas or LPG operation - recirculation operation - intake temperatures below 5°C with stainless steel heat exchanger * - heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° You can find more items - new and used - in our store! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 2016, A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in between. The entire line has been dismantled and stored. Videos on request. Bedpfx Abowzx Tfo Tsdk

Condition: new, functionality: fully functional, Year of construction: 2025, working width: 6,400 mm, bending angle (max.): 150 °, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 3 mm, overall weight: 17,750 kg, total length: 8,000 mm, total width: 1,800 mm, total height: 1,875 mm, warranty duration: 12 months, Equipment: documentation/manual, safety light barrier, EVOBEND D-Series: Flexibility and speed at the highest level Maximum flexibility and precision The EVOBEND D-Series, equipped with the SmartBend principle, offers unparalleled versatility. Complex profiles that could previously be finalized manually or not made at all can now be produced fully automatically. The innovative bending technology ensures fast and precise results thanks to minimal, simultaneous movements. Highest speed As the fastest long folding machine, the EVOBEND D series works with maximum efficiency regardless of the machine size. Each axis can be controlled individually to optimize the entire bending process. This allows the speed to be adapted to specific work steps and material requirements. Compact design The sophisticated design of the EVOBEND D series saves valuable space in your production hall. With an insertion depth of 1250 mm and a working length of 6400 mm, the D600 machine requires significantly less space than comparable models. This optimizes the production flow and facilitates integration into existing workflows. Safety and efficiency Our machines are fully enclosed, which not only protects the operator but also the machine from external influences. Retractable safety fences and integrated light barriers ensure maximum work safety. The risk of injury is further minimized by dispensing with swing-out bending beams. Bjdpofrlpuofx Ab Tjdk Robustness and low maintenance Thanks to the use of high-quality components such as precision-manufactured parts and an all-electric drive system, the EVOBEND D series is extremely durable and requires minimal maintenance. The absence of hydraulic components reduces the risk of breakdowns and significantly reduces maintenance costs. Sustainability and low noise With up to 90 % lower energy consumption compared to conventional machines, the EVOBEND D series is both economically and ecologically advantageous. The quiet, electric drive technology also ensures a pleasant working environment and reduces noise pollution. Material-friendly bending technology The innovative bending principle reduces marks and damage to the workpiece to a minimum. The electric clamping beam drive adapts flexibly to different material types and thicknesses, enabling the gentlest possible processing. Top standard as standard Every EVOBEND D-Series machine is equipped with the highest quality components and functions as standard. From the dual-track gripper system to automatic adaptation to material type and thickness - EVOBEND offers uncompromising quality for demanding bending tasks.

Condition: new, Year of construction: 2025, The electric forklift is an innovative combination of modern technology, efficiency and ergonomics that meets the highest standards in the logistics and warehousing industry. Equipped with an electric drive, it provides quiet, emission-free operation, making it the perfect solution for working inside warehouses, production halls and wherever ecology and comfort are important. The absence of exhaust emissions eliminates the need for additional ventilation, and the low noise level improves the working environment for the operator and the entire team. A high-capacity battery and charger are included as standard! The electric motor is highly efficient and energy-saving, resulting in long operation on a single charge and lower operating costs compared to combustion trucks. AGM batteries are also characterised by a longer service life, high resistance to deep discharges and fast charging times, which minimises downtime and increases operating efficiency. This solution translates into lower operating costs and greater reliability in daily use. A maximum lifting capacity of 1,600 kg enables the smooth transport of a wide range of loads, from palletised to customised goods requiring solid support and stability. The lift height of 4,500 mm makes optimum use of warehouse space, enabling goods to be stored in high racks and orders to be picked efficiently. The compact and slim design makes the forklift ideal for use in tight storage spaces, narrow aisles and between racks, ensuring precise manoeuvring even in restricted conditions. I The forklift is equipped with side shift and fork tilt, which significantly increases its versatility and precision when handling loads. The lateral shift function allows the forks to be precisely positioned without having to move the entire vehicle, which improves loading and unloading operations, especially in confined spaces. The fork tilt function allows goods to be lifted and deposited in a stable and safe manner, minimising the risk of goods slipping or being damaged. Thanks to the use of durable materials and robust construction, the trolley is resistant to intensive use and changing working conditions. High quality workmanship and attention to detail translate into reliability and minimal service requirements. Every component is designed to maximise operational efficiency, eliminating unnecessary downtime and increasing the speed of operation in a dynamic warehouse environment. Bdodpfowayubox Ab Tek Included: - built-in batteries - charger Technical specifications Payload 1600 kg Height of raised forks 4500 mm Height of lowered forks 80 mm Length of forks 1070 mm Lateral shift Yes Mast tilt Yes Turning radius 1495 mm Wheel diameter 305/145 and 250/120 mm Battery voltage/capacity 24V 320Ah Continuous operating time on a charged battery up to 10 h Charging time 10 h Drive motor power 2, 2 kW Lifting motor power 3.3 kW Electromagnetic brake Travel speed with/without load 6.4 / 7.2 km/h Rubber wheels type Weight 2600 kg