Used Halls for sale (325)

Condition: refurbished (used), Year of construction: 2020, operating hours: 740 h, functionality: fully functional, fuel type: electric, Stolzenberg Ride-On Sweeper Twin Top TT 1100 / E, Year of manufacture: 2020, approx. 740 operating hours, new batteries, New side and main sweeping brushes, Brush width: 700 mm, total sweeping width: 1100 mm, Tandem roller system (TWS), turning radius: 1.2 m, Drive: forward & reverse, rear-wheel differential drive, Debris container capacity: 90 L, battery charger included, Filter cleaning: electric Cleaning area: up to 12,000 m² Sweeping performance: 6,600 m²/h, climbing ability: 20 % Operating time: 4.5 h, drive power: 1,320 W, 4x 6V 180 Ah battery Dust extraction airflow: 900 m³/h Impact-resistant plastic, PE housing, easy to service The sweeper is suitable for indoor & outdoor use, ideal for sand, fine dust, and general applications. Very well-maintained and overhauled condition! Machine location: Storage facility D-46514 Schermbeck. Dcedpfx Abox Ak R Ao Tjr ✅ Features & Benefits: - NEW maintenance-free batteries – ready for immediate use - NEW side and main sweeping brushes - Tandem roller system (TWS) for effective debris collection - Suitable for both indoor and outdoor areas - Reliably collects sand, fine dust, leaves & coarse debris - Excellent extraction – ideal for dusty environments - Compact & maneuverable – excellent front visibility - Reliable performance in narrow aisles & delicate flooring - Ultra-quiet operation – also suitable for noise-sensitive areas _____ Ride-On Sweeper Stolzenberg Twin Top | Battery-Powered Sweeper | 1100 mm Sweeping Width Sweeper | Used TwinTop TT 1100 E Sweeper | Industrial Electric Sweeper | Used Hall Sweeper | 2020 Ride-On Sweeper | Sweeper with New Batteries | Buy Stolzenberg Sweeper | Warehouse Cleaning | Electric Area Cleaning | Industrial Indoor Sweeper

Year of construction: 2015, condition: used, Technical details: suction capacity: 1600 m³/h filter: siehe Foto weight of the machine approx.: 85 kg connected load: 0,75 kW dimensions L x W x H: ca. 1,0 x 0,6 x 0,7 m Dsdowhu Thjpfx Ab Tocr Oil mist separator - Dry separator Mechanical air filter for oil and emulsion mist Application: Extraction and filtering of oil and emulsion mist as well as smoke and aerosols Space requirement: kThe IF-Vario can be installed at the extraction point for ceiling extraction, as well as on the hall ceiling, on the walls with wall racks or on single-column bases in the hall for recirculating air operation. Protection class IP 54 *

Condition: like new (used), functionality: fully functional, operating hours: 2 h, IR tunnel dryer (electric dryer) with quartz tube, width: 90 cm, heated section 240 cm, max. temperature 200° C, 32 A plug. The unit is in like-new condition, only used 1-2 times for demonstration purposes. The original price is €10,500 net. The dryer is located at our company hall in Bruchweiler-Bärenbach and can be inspected and tested at any time. Dcedpfx Absw N Rw Ds Tsr

Condition: used, Used warehouse - Dimensions: L 10,000 mm x W 5,000 mm x H 4,500 mm - Steel/cold hall - Clad with steel sheeting - Gable end with double-leaf door - Without structural calculations For self-dismantling or dismantling service can be offered. Dcedpfxjxrpiio Ab Tsr

Condition: excellent (used), For sale: Professional TEMPEST DD21 positive pressure blower, commonly used by fire departments, industrial facilities, paint shops, warehouses, for emergency ventilation, and anywhere extremely high air flow capacity and reliability are required. The unit is fully operational, powerful, and ready for work. The motor and control panel are EX (explosion-proof / ATEX) rated—this is a premium device rarely available on the secondary market. ————— Technical data: • Brand / Model: TEMPEST Power Blower – DD21 Dcedpfxexyugpo Ab Tjr • Manufactured in: Germany • Year: 1998 • Power supply: 380V / 3-phase (400V) • Controller: CEAG GHG 635 0510  – Ui: 690V  – In: 4.0–6.3 A  – EX version • Motor: VEM motors GmbH – Made in Germany – ATEX  – Power: approx. 2.5–3 kW  – EX class: EEx e II T3  – Speed: 2850 rpm • Certification:  – AMCA CERTIFIED (certified air performance)  – ATEX / EX (explosion-proof) • Robust steel frame with transport rollers • Large metal impeller with very high efficiency ————— General condition: The unit is well-maintained, fully functional, and from a professional facility. Typical signs of use, but technically and structurally in very good condition. ————— Applications: • Fire departments – positive pressure ventilation • Warehouses, industrial halls, paint shops • Extraction of smoke, dust, fumes • Machine and process cooling • Air purging during service work

Condition: used, functionality: fully functional, Year of construction: 2025, Characteristics of the gantry crane: An overhead crane with a lifting capacity of up to 1 ton is a versatile device that can be used in various areas, such as unloading, loading, repairs, warehouse work, assembly and many others. It is an extremely useful tool in halls, workshops and warehouses where effective moving and lifting of heavy objects is needed. The device has been specially designed to work on horizontal and flat floors, allowing easy movement along straight lines. Thanks to four return rollers, the crane ensures smooth movement around the working space, and parking brakes ensure safe stopping in appropriate places. Adjusting the unloaded height of the crane is simple and safe thanks to a lever and two safety screws on each bracket. Additionally, the stability and durability of the crane are ensured by a solid structure and additional transverse struts that ensure torsion resistance. An additional advantage of an overhead crane with a lifting capacity of up to 1 ton is the possibility of installing a trolley with a manual drive, which allows for even greater flexibility and freedom of movement on tracks or guides. Advantages of the gantry crane: Djdsxzr Rzopfx Ab Tocr Designed for loading and unloading, assembly, repair or storage work in workshops and halls on horizontal and smooth floors Easy to move and install using four return rollers with parking brakes Easy and safe height adjustment when unloaded via a lever and two securing screws per bracket Stable and durable, torsion-resistant structure thanks to additional transverse struts Possibility to install a trolley with a manual drive Technical parameters of the crane: Load capacity 1000 kg Height 2500 mm – 3600 mm Width 2300 mm Double T carrier 76 x 140 mm Total width (base) 2400 mm Upper beam width 2550 mm Total height 2520 mm / 3720 mm Working width for winch 1750 mm Support frame tensioners 4 pcs Transverse reinforcements of the supporting beam 2 pcs Weight 142 kg The overhead crane can be retrofitted with rope or chain winches after using a block or trolley. Overhead crane without a winch visible in the photos ATTENTION!! The machine is a return, without packaging, without zip.

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD268, ABUS overhead travelling crane, crane runway, bridge crane, hall crane, crane Load capacity / lifting capacity: 2 t - 2000 kg Span: 5550 mm, external dimension approx. 5700 mm Year of manufacture: 1989 with pendant control Lifting height: 6 m Hoist: GM820 F6 Overall height (top of crane to hook): approx. 610 mm Dcodpfx Absxmuvqj Tsr End carriage length with buffer: approx. 220 cm Including 7 m HEB200 running rails and 7 m conductor rail The crane is dismantled and immediately available Very good condition, inspection book available Column slewing cranes and wall-mounted slewing cranes are also available Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight carrier is possible—please inquire with your postal code Collection preferred

Condition: used, Year of construction: 2018, operating hours: 6,700 h, type of input current: three-phase, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, Oil mist extraction for workshops – Plug & Play filtration tower for extracting oil mist during the emission of cooling lubricants. IVAT Ölnebel-T5K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapors. Industrial hall ventilation and filtration: numerous manufacturing processes, especially in metalworking, generate substantial oil mist. Very often, extractor systems for coolant recovery integrated into machines are either insufficiently effective or simply not installed. Machine retooling, frequent opening of enclosures, or lack of guarding around machining heads leads to the release of oil mist into working areas, exposing personnel to harmful vapors and mists. Installing a ventilation tower significantly improves air quality at workstations and is the ideal filtration supplement for workshop halls where comprehensive oil mist separation via coolant recovery units is difficult or impossible to achieve. Features automatic air and temperature monitoring in the room. An innovative PLC control system compares input data, detects threshold exceedances in the working area and heat buildup directly under the ceiling, and automatically regulates air quality and temperature. Performance: up to 5,000 m³/h Dodpfxsxxh Tae Ab Tjcr Negative pressure: up to 3,100 Pa Filtration surface: 9 m² Fan power: 3 kW Year of manufacture: 2018 Operating hours: 6,700 Several units of this device available.

Condition: as good as new (ex-display), total width: 1,060 mm, total height: 1,540 mm, Remark: - This is a II. Wahl product, new and unused. II. Choice means there may be dust deposits, minimal scratches or soiling may be present Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: approx. 1,056 mm Number of bays per shelf row: 01 pcs. á 994 mm Number of shelves: 06 pcs. The scope of delivery includes: 02x shelf uprights, second choice (new) Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm Dodpfsp T T Daox Ab Tscr incl. bulkhead stays and base plates The uprights are unassembled 1,540 mm high 300 mm deep Remark: We are happy to pre-assemble the shelf uprights for you. Surcharge: 8.50 € | pc. plus 19% VAT. 06x Shelves, second choice (new) Article: ZB 4313 L Material color: grey Dimensions: 994 x 300 x 30 mm Weight / pc.: approx. 2,640 kg Max. load per shelf 100 kg with evenly distributed load 01x cross bracing, II. choice (new) Material color: sendzimir galvanized 24x open fronted storage box, II. choice (new) Manufacturer: SSI Schäfer Type: LF 322 Color: yellow Design: Recessed grip on the back Material: Polypropylene External dimensions (LxWxH): approx. 434 x 209 x 200 mm Internal dimensions (LxW): approx. 291 x 181 mm Usable height in stack: approx. 185 mm Capacity: 10.4 liters Stackable: yes Weight per unit: 0.780 kg Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), functionality: fully functional, 8 large, high-power DEMAG travel drives complete with gearbox and travel wheel / DRS wheel block for crane bridge Dcjdpjv T Tf Uefx Ab Tsr From large DEMAG spare parts stock, see also my other offers Low hours, very good condition, offered due to dismantling of factory hall Motor: ZBF100 A4 B050 Gearbox: ADK70 QD Wheel: DRS 315 (manufacturer's new price approx. €3,000.00 net per unit) Price: €4,490.00 each, complete For purchase of 8 units: €3,490.00 each net Info: We have over 20,000 DEMAG items in stock! Check my other offers from stock as well!

Condition: excellent (used), Year of construction: 2004, operating hours: 292 h, overall weight: 160 kg, I am selling a Stolzenberg TTE 1000 sweeper. Stolzenberg TT E 1000 is a self-propelled sweeper with electric drive (batteries) designed for daily sweeping of large indoor areas (up to 8000m²), such as parking lots, small production halls and showrooms, etc. The suction system used allows removing dust and fine dirt also from textile surfaces (carpets, rugs). The sweeper does the work with two disc (side) brushes and cylindrical brushes, made of abrasion-resistant polyamide. TRS high-performance sweeping system Djdpoud A Hkjfx Ab Tscr Main brush drive Front/rear drive - to the rear axle through a differential mechanism Separate drive for each rear wheel Robust laser-welded frame construction, extremely impact resistant Rotating guards made of polyethylene Ergonomically positioned buttons Collects sand and fine dust Easy to operate Exceptionally large surface area of the filter and debris container Quick change mechanism of rollers and side brushes Very maneuverable (turning radius - 1 m) Quiet operation Electric filter cleaning system Extremely easy access for service work Trouble-free chain transmission Very powerful motor Ability to clean textile surfaces (carpets, rugs, etc.) Approximately 50% larger cleaning area compared to a manually operated sweeper having the same sweeping width Categories: STOLZENBERG, Sweeping machines Electric drive - 24 V, 900 W TWS sweeping method - two brushes Sweeping width - main brush (mm) 600 Width with 1 side brush (mm) 800 Width with 2 side brushes (mm) 1000 Chain transmission Brush drive yes Extraction yes Air flow rate (m³/h) 600 Trash container (l) 70 Filter surface area (m²) 3 Filter cleaning system electric Theoretical efficiency (m²/h) 6000 Practical output (approx. m²/h) approx. 70% of theoretical output = 4,200 Max. speed (km/h) 6 Max. surface slope (%) 20 Dimensions - L x B x H (mm) 1190 x 790 x 1089 Weight (kg) 160 ID: 905240967

Condition: new, functionality: fully functional, Year of construction: 2025, Product characteristics: Dcederidh Nspfx Ab Ter The Cormak 2-ton gantry crane is a specialized industrial machine designed for moving heavy loads in industrial halls. It consists of many elements, including a supporting frame, a trolley and other components that enable easy, safe and precise movement of loads horizontally and lifting and lowering them using hooks. The model is distinguished primarily by its durability and stable construction, thanks to which it can be used in difficult industrial conditions. This crane is also resistant to torsion, which is ensured by additional reinforcements used in the structure. One of the most important features of the crane are four return rollers that ensure easy movement of heavy loads. These rollers are extremely durable and abrasion-resistant, which guarantees their long service life. Another important element are the built-in parking brakes, which ensure safe stopping of the crane in any place. Height adjustment on the device is easy and safe when the lever is not loaded and with the help of two screws securing each bracket. The crane's structure is durable and stable, and its ease of use makes it an ideal solution for companies that need an efficient and reliable machine for moving heavy loads. Moreover, the multitude of retrofitting options allows it to meet even more applications and tasks in various industrial sectors. Thanks to its efficiency and precision, the overhead crane is a versatile work tool that can be additionally equipped with rope or chain winches. After using a block, an overhead crane with a winch or chain allows for even more precise and effective movement of heavy loads. As a result, it is used in many industrial sectors, such as construction, metallurgy and the chemical industry. Using a gantry crane, you can carry out warehouse, assembly, loading and unloading works, as well as repairs. All these activities are performed with high precision and safety, which in turn translates into higher quality of work. Technical parameters: Load capacity: 2000 kg Double T-carrier: 100 x 180 mm Height: 2400 mm – 3600 mm Width: 2360 mm Weight: 168 kg Overhead crane without a winch visible in the photos

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: ROD239, ABUS overhead crane runway bridge crane hall crane crane Load capacity / lifting capacity: 1t - 1000kg Track gauge: 6550mm, external dimension approx. 6700mm Year of manufacture: 1989 with floor control Lifting height: 6m Hoist: GM810 F6 Construction height from top edge of crane to hook approx. 610mm End carriage length with buffer approx. 220cm Includes: 10m HEB160 running rails and 10m conductor rail The crane is dismantled and immediately available. Dodpfx Aexmuu Tjb Tecr Very good condition, inspection book available. Pillar and wall-mounted slewing cranes are also available, as well as Demag KBK and Abus HB systems, in addition to Errikla, Hadef, Stahl KT 2000, etc. Shipping via carrier possible, please inquire with postal code Collection preferred.

Condition: used, Year of construction: 2017, operating hours: 22,300 h, type of input current: three-phase, overall weight: 1,600 kg, total width: 2,100 mm, total length: 1,800 mm, total height: 3,700 mm, filter area: 222 m², suction capacity: 20,000 m³/h, Novus AirTower FT0120018 EC Filter Ventilation Tower - 20,000 m³/h Djdpfx Ajxxhwreb Tjcr Industrial Hall Filter Ventilation for Welding Shops — suited for various technological processes in production plants, predominantly during metalworking operations. Ultra-low energy consumption thanks to the implementation of innovative fan technology. Utilizes an EC (Electronically Commutated) fan instead of a standard unit, delivering SIGNIFICANT savings by minimizing power usage. The EC fan, equipped with an integrated inverter, allows variable speed control and enables adjustment of energy consumption/performance within the 60%, 80%, and 100% operating ranges. Air is drawn in from above and gently discharged near floor level directly at workstations, avoiding unpleasant drafts. Based on the principle of stratified filter ventilation, the unit does not require ductwork installation. Equipped with self-cleaning cartridge filter elements, using compressed air pulses during operation. Filter cleaning is managed by differential pressure control, preventing compressed air wastage. Stratified ventilation principle: contaminated air is drawn from above, filtered, and then released at floor level as clean, respirable air without creating drafts, at speeds below 1.2 m/s—precisely where operators work. Covers a wide 270-degree area. The AirTower operates according to the stratified ventilation guidelines recommended by trade associations, considered the most effective method of air recirculation. Year of manufacture: 2017 Operating hours: 22,300 Specifications: - 4 EC fans, each 3.9 kW - Airflow: 20,000 m³/h - Filter area: 222 m² - 6 cartridge filter elements - High-efficiency final filter - Fire safety package - EC Blue energy package - Hall dust sensor: dust level sensor with LED indicators, transmitting air quality data to the AirTower for automatic power adjustment Energy savings depending on the current dust concentration in the hall. Exceptionally quiet operation Stock no.: 1067

Year of construction: 2020, condition: as good as new (ex-display), Here we offer you a resistance welding machine. The equipment is designed for automated resistance welding of the following connections: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The equipment is loaded and unloaded manually by one operator. Any use of the system other than the one described above is not in accordance with the intended use and is therefore not permissible! Layout of the unit Welding unit Sledge unit Cleaning unit weding electrode Dcjdpeht U Snefx Ab Ter Base Linear unit Analysis unit DMC Dimensions (lxw) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Techn. availability % ≥ 95 Operator piece 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Back-up fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of construction 2020 Components of the plant -control cabinet -Protective enclosure -Linear unit Toothed belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Transmission ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 -Slide unit Balluff BES M08EC-PSC15B-S49G -evaluation unit DMC: Keyence SR-1000 -welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Welding gun Crede PSZ-K Control unit : ST-T13V2.0 Power unit : LT- [...]

Condition: used, functionality: fully functional, Year of construction: 2016, Silo System I Consists of 12 hopper silos with access doors, sight glasses, and ventilation hoods. Arranged in two separate rows of six (on the left and right side of the bucket elevator) along the hall wall. Total storage capacity approx. 348 tons (29 tons per silo). Dimensions per silo: 3.10 m x 3.10 m, height 5.40 m, capacity approx. 26.3 tons. _____ Silo System II Comprising three single-cell hopper silos with raised outlets, including access doors and aeration cone: - Silo 1: 2.10 m x 3.10 m / height 5.23 m (approx. 15 tons) - Silo 2: 3.10 m x 3.10 m / height 5.23 m (approx. 23 tons) - Silo 3: 2.10 m x 3.10 m / height 5.23 m (approx. 15 tons) _____ 2 x trough chain conveyors RTF 20 S (beneath the silo group), galvanized version. Total length: 19 m (conveying length 18 m + bend). Capacity: approx. 20 t/h, equipped with reinforced roller chain. _____ Trough chain conveyor RTF 20 S, total length: 5.0 m (conveying length 4 m + bend). Capacity: approx. 20 t/h, equipped with reinforced roller chain. _____ ABC conveyor belt system, belt width 500 mm, capacity approx. 40 t/h. The belt conveyors are designed as trough belt conveyors made of aluminum. All are supplied with oil-resistant belts, spindle tension devices, infeed and discharge hoppers, as well as internal and external belt scrapers. A-conveyor: length 9.00 m, with 2.2 kW drum motor Dcodpexyqbpofx Ab Tor B-conveyor: length 22.00 m, with 3.0 kW drum motor C-conveyor: length 10.00 m, with 2.2 kW drum motor Including control panel, cables, cable trolley, and C-rails for the cables; radio control unit for mobile operation. _____ Mobile intake auger with hopper. Adjustable incline from 15° to 25° via universal joint. Length of inclined auger: 2.42 m. Discharge height: 0.92 m. Intake hopper (L x W x H): 1.49 m x 1.00 m x 0.44 m. Raised intake hopper: 2.95 m x 1.41 m x 0.61 m. _____ Bucket elevator Type EB 20 A for outdoor installation, length: 7.0 m, capacity approx. 20 t/h _____ Control cabinet for operating the conveyor units and belt system, constructed of painted sheet steel. - Siemens ISOBUS / Display, touch-screen Pricing: Ex works, loaded. Disassembly by purchaser. Sale of individual components is possible.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For sale: steel hall structure 1. Location: Braniewo, Poland 2. Dimensions (axes): 21.9 x 27.4 + 12.4 x 21.9 (W x L) [m], usable height = 4.50–5.1 [m] 3. Steel structure is new, never assembled, painted, stored outdoors since 2019, bolted assembly 4. Offer includes: - Main supporting structure (columns, beams, bracing), without Z-purlins and connecting bolts - Roof skylight 2x16 m 5. Drawings: 5.1. Sections: 2 pcs 5.2. Roof structure plan: 1 pc 5.3. Design requirements: 1 page 5.4. Photos: 2 pcs 6. Price: €69,000 net, ex works 14-500 Braniewo, Poland Dodexyid Nopfx Ab Tscr 7. Note: possibility of extending/modifying the structure by our company 8. Possibility to purchase part of the offered hall structure 8.1. Option to provide Z-purlins and connecting bolts for an extra charge 9. Free loading We are a manufacturer of steel halls and also offer tailor-made solutions – halls built to customer specifications, including delivery and assembly. Contact us for more information, a quotation, or a non-binding consultation.

Condition: new, Year of construction: 2025, Basic advantages of the scissor platform trolley The scissor platform trolley with a capacity of 800 kg and a lifting capacity of 1500 mm is a versatile and reliable device that is used in various industries and work environments. This robust scissor trolley has been designed to facilitate the movement of heavy loads and to enable lifting heights of 1,500 mm. Thanks to its load capacity of 800 kg, the scissor platform trolley is able to handle a wide range of materials, such as boxes, pallets, machines, and other heavy objects. It has a durable structure that guarantees stability and safety during load manipulation. Lifting loads with a scissor platform trolley The lifting height of 1500 mm is a feature that allows access to hard-to-reach places. The ability to raise the platform to such a height allows work to be performed at different levels, which increases the efficiency and flexibility in the applications of this scissor lift truck. The scissor platform trolley is easy to operate and maneuver. It is equipped with ergonomic handles and intuitive controls that enable the operator to smoothly control the truck and precisely position the load. Additionally, it is equipped with brakes, which ensures safe stopping of the scissor trolley at the desired place. Product for transporting electric batteries with a capacity of 800 kg The scissor platform trolley is an excellent tool for efficiently transporting electric batteries and car batteries. Its solid construction and stability allow for the safe transportation of even heavy and delicate elements, such as heavy batteries. Thanks to the scissor lifting mechanism, the trolley allows easy loading and unloading of batteries, which is important both in the production process and in the area of warehouse logistics. The flexibility and precision of movement of the scissor platform trolley make it an irreplaceable tool in the industry dealing with the storage and movement of electrical components, contributing to increasing the efficiency and safety of processes related to the handling of electric batteries and car batteries. Summary of the advantages of a scissor lift truck This particular version of the scissor platform trolley is characterized not only by high load capacity and lifting capacity, but also by solid construction, durability and ease of operation. It is an irreplaceable tool for warehouses, production halls, logistics centers and other places where it is necessary to effectively move and lift heavy loads to heights. Attractive prices of platform trolleys and fast delivery of orders in our store will enable effective support for your business. Djdpfx Ajric Iteb Tscr Technical parameters MAXIMUM LOAD 800 kg LIFTING HEIGHTS 480-1500 mm PLATFORM DIMENSION 1220x610 mm TOTAL DIMENSIONS 1520x700x1000 WHEEL DIAMETER 150 mm WEIGHT 172 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, working width: 550 mm, area performance: 3,300 m²/h, overall weight: 235 kg, water tank capacity: 50 l, battery voltage: 24 V, The Kärcher B50 W Bp Pack 115Ah R55+Dose+Rinse+Autofill is a compact yet powerful scrubber-dryer equipped with numerous innovative features. It offers a stepless drive system, a detergent dosing system, automatic shut-off of the fresh water supply while filling, and a dirty water tank cleaning system. Additionally, the machine can be configured via app, and maintenance or support information can be accessed through it. Dedpfjxb A U Rsx Ab Tscr The Kärcher B50 W features a robust roller brush deck, which provides the advantage of sweeping coarse debris, such as wood splinters, into a separate coarse dirt container. This ensures that suction performance is not compromised. It is suitable for daily cleaning of workshops, schools, sports halls, and similar facilities. Technical data: Working width: 550 mm Tank capacity: 50 litres / 50 litres (fresh/dirty water) Runtime: max. 2.5 hours Area coverage: 3,300 m²/h

Condition: used, Year of construction: 2017, operating hours: 20,700 h, type of input current: three-phase, overall weight: 1,600 kg, total width: 2,100 mm, total length: 1,800 mm, total height: 3,700 mm, suction capacity: 20,000 m³/h, Novus AirTower FT0120018 EC filter ventilation tower - 20,000 m³/h Industrial hall filter ventilation for welding halls — suitable for numerous technological processes in manufacturing facilities, mainly those involving metalworking. Extremely low energy consumption thanks to innovative fans. Features energy-saving EC fans instead of standard fans, providing SIGNIFICANT savings by minimizing electricity usage. The EC fan with integrated inverter enables precise control of fan speed, energy consumption, and device efficiency. Adjustable operating range: 60%, 80%, or 100%. Air intake from the top with draft-free air discharge at floor level — precisely at workstations. Layered filter ventilation system; no need for pipeline installation. Self-cleaning cartridge filter elements — cleaned automatically by compressed air pulses during operation. Filter cleaning is based on differential pressure, ensuring no compressed air losses. Layered ventilation principle: contaminated air is drawn in from above, filtered, and then released at floor level as clean, breathable air with no drafts, at a velocity below 1.2 m/s — directly where employees breathe, covering a broad 270-degree area. The AirTower operates in accordance with the layered ventilation method recommended by professional associations, considered the optimal form of air circulation. Year of manufacture: 2017 Operating hours: 20,700 Specifications: - 4 EC fans, each with 3.9 kW power - Airflow rate: 20,000 m³/h - Filter surface area: 222 m² - 6 cartridge filter elements - High-efficiency final filter - Fire protection package - EC Blue Energy Package - Hall dust sensor — LED-indicated, transmits dust concentration data to the AirTower to adjust device output automatically. Dcodpexxalnefx Ab Ter Enables energy savings based on current dust levels in the hall. Very quiet operation Stock no.: 1066

Condition: excellent (used), Year of construction: 1994, High-performance crank guillotine shears Fab. Fasti Typ. 507 - 1040 x 4mm year 1994 Technical data Make FASTI Type 507 - 10/4 Year of construction 1994 Sheet width 1040 mm Sheet thickness 4.00 mm (aluminum 6mm, VA 2mm) Cutting angle: 1.5° Stroke rate 50 strokes/min Table height: 800 mm Drive power 400 V / 7.5 kW Space requirement: approx. 1.8 x 2.4 x 1.5 m Weight: approx. 2000kg Dcedetuv N Njpfx Ab Tsr Equipment - Controlled back gauge 10 - 600 mm - Angle fence with scale 750mm - 1 additional support arm - Manual cutting gap adjustment !!! - Pneumatic sheet holding device - documentation All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: good (used), Reznor UDSA gas hot air generator UDSA gas hot air generator - efficient right up to the peaks The best-known device from REZNOR is the UDSA gas hot air generator, which ensures even air distribution in industrial halls. The easy-to-install air circulation unit is available in 14 output sizes from 7 to 97 kW and consists of a heat exchanger, gas burner and an exhaust fan. The combustion air can be taken either from outside or from the showroom as standard. The UDSA hot air generator from REZNOR ensures even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer and ensures an efficiency of over 92 percent. UDSA: compact, revolutionary and trend-setting. With this generation of appliances, halls can be heated directly in a particularly economical way - i.e. without central heating - with decentrally arranged, modulating gas hot air heaters. REZNOR UDSA Gas hot air heaters. The advantages: Efficiency of more than 92% Device is also suitable for vertical installation Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Djdowb Amispfx Ab Tscr Vertical and horizontal air guide vanes as standard Modulation of the heat output to up to 50% EC technology ErP Ready These appliances are directly heated gas WLEs with fan-assisted atmospheric multi-gas burners. The installation of the gas WLE and the gas and exhaust gas connections may only be carried out by an approved installation company. The gas WLEs are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation 1-stage or 2-stage* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day/night/week program Exhaust gas discharge via roof, version B or C ° Exhaust gas discharge through the outside wall, version C ° Gas WLE type: UDSA064-4E Gas appliance type: BSP-C12-C32-C52-C62 Destination: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.90 mbar Max. Nominal heat load (Hs) QN: 77.69 kW Max. Nominal heat load (Hi) QN: 70.00 kW Min. nominal heat load (Hs) QN: Min. nominal heat load (Hi) QN: Max. nominal heat output: 64.40 kW Nominal heat output: 64.40 kW Min. nominal heat output: Supply voltage: 230V 1N ,50Hz Air flow rate: 6810 m3/h Protection class: IP20 Pin no. 0461BN0677 You can find more items - new and used - in our store! International shipping costs on request!

Condition: new, functionality: fully functional, power: 150 kW (203.94 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 150" heat cannon is a high-performance heater suitable for use in halls, workshops, marquees, materials, greenhouses, and more. Currently, 3 units are in stock for immediate delivery. Condition: New / unused from warehouse clearance / insolvency Scope of delivery: - 1 Remko CLK 150 heater with oil burner - 1 Roth mobile heating oil tank, 1000 L - 1 Room thermostat with connecting cable Nominal heat load: 150 kW Air output: 9710 m³/h Fuel: EL heating oil Maximum fuel consumption: 14.8 L/h Flue gas losses: max. 9% Flue gas connection: Ø 200 mm Air outlet: Ø 500 mm Connection voltage: 230 V Dimensions (H/W/D): Approx. 1350 x 920 x 2100 mm Weight: approx. 312 kg The machine can be inspected on site by appointment. All information provided without guarantee. Subject to prior sale. Dsdpoxli I Sofx Ab Tecr

Condition: good (used), Year of construction: 2018, operating hours: 14,014 h, load capacity: 1,400 kg, lifting height: 8,560 mm, fuel type: electric, mast type: triplex, Linde R14 electric forklift truck - used. The R14 series of reach trucks are ideal for indoor and outdoor use, i.e. for transporting goods under changing environmental conditions (e.g. loading and unloading vans). Extra-large and flexible wheels, a cushioned drive unit, higher ground clearance under the forklift and an operator station to which vibrations are not transmitted ensure high driving comfort and safety. As a result, the R14 multi-purpose reach trucks enable both jolt-free travel on uneven terrain and efficient load handling in the narrow aisles of warehouse halls. The machines can be adapted to individual operator comfort requirements. The R14 trolleys have powerful engines and numerous safety features. Trolley specifications: LINDE brand Model R14 Product condition Used Article number MTP004523 Year of manufacture 2018 Fuel type Electric Dcedpfxer Hn A Ds Ab Ter Number of operating hours 14,014 Load capacity (kg) 1400 Lifting height (cm) 856 Triplex mast Free-stroke Yes 48V battery Net price : 6299 euro net * Transport throughout Europe possible. * The aforementioned offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland

Condition: refurbished (used), Year of construction: 2019, operating hours: 189 h, functionality: fully functional, working width: 900 mm, area performance: 5,700 m²/h, overall weight: 957 kg, water tank capacity: 150 l, battery voltage: 36 V, The Kärcher B150R D90 Dose was manufactured in 2019 and has only 189 operating hours. We have completely overhauled the machine; every component has been cleaned and tested for proper functionality. The suction bar, base plate, and bumper have been sandblasted and newly powder-coated in our workshop. New squeegee blades on the suction bar ensure perfect water pick-up performance. The machine is fitted with six new maintenance-free gel batteries, which can be conveniently charged using the integrated charger. Additionally, the Kärcher B150 R features a cleaning agent dosing system that precisely meters and introduces detergent during the cleaning process. The Kärcher B150 R is ideal for medium to large areas such as logistics halls, workshops, or underground car parks. Technical data: Working width: 90 cm Fresh water tank: 150 liters Suction width: 118 cm Dcjdpfx Abexx S Dce Ter Weight: 957 kg