Used Gasket for sale (142)

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Nkjdpfx Aox Nuf Tjhvjw Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Trailer—Type: CR 47 Nedpfxjx Nufms Ahvskw Chassis: Two fully automatically welded I-shaped longitudinal beams with welded cross members, chassis width 1,400 mm, 2" king pin, tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, 3x 9t SAF axle units with air suspension, axle spacing of 2 x 1310 mm, lift and lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Dura Bright aluminum rims, size 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO compressed air brake system with RSS, according to standard 98/12/CE – ECE R13/09, connected brake wear indicator Landing Gear: Mechanical landing legs with two speeds, 2x 20t support load with pivoting foot, rear without landing support Electrical System: All lights are LED, 24 V electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, required number of yellow side marker lights, rear position lights, front marker lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, two multifunction rear lights mounted at the pivot height in aluminum brackets according to standard 97/28/CE-2007/35/CE, one LED work light on the tank, yellow warning beacon at the rear, mounted at hose pipe height, 2x reverse lights in underrun protection, 2x reverse lights at landing leg height (each switchable on the power console) Tank Version: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, 47,000 liter capacity, tank warranty: 24 months from delivery. Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40° to +80°C Filling Options: 4 manholes DN 450 with swing and hinged dome covers. The dome covers are sealed pressure-tight with 4 wing nuts each, rubber supports on top for dome covers, drip rail closed at the front, open at the rear Material Discharge: 1 material discharge cone DN 800 made of stainless steel, folding with stainless steel agitator disc, material discharge cone can swing sideways, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: A 2.5'' stainless steel main air line mounted right side operations, one 4" stainless steel air distributor pipe mounted at the rear of the tank, air valves (shut-off flaps) in INOX, upper air hose and air connection hoses are in 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the pivot Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail, can be raised with a separate fold-out ladder section from below with parking brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank Delivery Hose Compartment: 4 hose tube containers 5 m long, DN 200, made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum, left side

Condition: good (used), In good technical condition and fully operational. Manufacturer: Bud Masz M. Stachlewski Steel thickness – 0.5-1 mm. Profile height: 40 mm. Entry width: 1250 mm. Overall width: 944 mm. Effective width: 915 mm. Min./max. length at a thickness of 0.5 lm/12 lm starting from a thickness of 0.75 mm Nodpfxex Tf Hco Ahvskw Accessories, auxiliaries: screws, sealing tapes, profiled gaskets, anti-condensation treatment, light-transmitting profiles

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhein, table length: 1,600 mm, table width: 1,000 mm, controller model: Heidenhein iTNC 530, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, rotational speed (max.): 7,500 rpm, rotational speed (min.): 7,500 rpm, spindle speed (min.): 7,500 rpm, We offer this used TYC FVP 50 CNC machining center, year of construction 2003. Nkodpfx Asyfh Npjhvsw One small need for repairment - gasket seal, otherwise completed and ready for use. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2002, condition: excellent (used), functionality: fully functional, machine/vehicle number: 661 1401, For sale is a Schüco gasket insertion machine, item no.: PR 280010. The machine has only been used sparingly due to limited space, which explains its like-new condition. The machine can be inspected at our facility. Njdpfxsyc Sn Do Ahvskw

Condition: used, Year of construction: 1998, Manufacturer: 3C France Year : 1998 Type : Process skid with 1 reactor / vacuum mixer and 1 melting tank Previous application: pharmaceutical (coating solution)   A – Reactor / Main vessel Total volume: 1142 litres Pressure: – 1 / 2.4 bars Temperature : 144 °C Jacketed volume: 98 litres Pressure: 2.5 bars Temperature : 142 °C Mixel agitation: 2 deflocculators Ø260 mm Motor : 11 KW (1500 rpm) Sample intake Washing ball Level probe Inspection hatch, porthole, light   B – Melter Total volume: 152 litres Pressure: – 1 / 2.1 bars Temperature : 114 °C Jacketed volume: 24 litres Pressure: 2.5 bars Temperature : 148 °C Agitation: 1 tank bottom deflocculator Ø125 mm Motor: 2.2 KW (3000 rpm) Washing ball Level probe Sample intake Inspection hatch, porthole, light   Additional accessories : – Dosing pumps – Circulation pump – Flow meters – Controllers – Electrical cabinet with PLC and speed drives Nkjdpfx Ahsx R Di Rovjw   Access footbridge Batch of spare parts available (gaskets, seals, etc.) Full documentation in digital format  

Condition: used, Year of construction: 1988, Manufacturer : Comber Model: Pharmadry PH 100 Year : 1988 Type : vacuum dryer   Maximum temperature: 99°C Material: 304 and 316 stainless steel (in contact with product). Classification: Atex EEx IIB T4   Main tank diameter : ø 500 mm Main tank depth: 700 mm Power: 4 HP Filter Pressurised receiver tank Tubular heat exchanger   Nkedpfx Ahsx R Avisvjw Gaskets: new Paint: new Mechanical seal: As is, good condition

Condition: used, Window rubber, cutting machine, gasket cutter, pneumatic lamellar cutter, blind cutting device Nodpfxjf Sgwno Ahvekw -Lamellar cutter: for PVC and aluminum blinds, pneumatic -Manufacturer of pneumatic components: Festo -Dimensions: 680/340/H470 mm -Weight: 55 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 15,000 h, functionality: fully functional, briquette diameter: 60 mm, overall weight: 3,300 kg, The cylinder head, gasket, and oil were changed in 2022. Njdpfx Aoycdq Dohvjkw

Year of construction: 1991, condition: used, Technical details: drive power: 0,16 kW feed pressure: 11 bar liter capacity: 250 l total power requirement: 2,8 kw Piston Compressor with Air Pressure Tank Condition: Cylinder head gasket and steel blade defective. The piston is ok. As a spare part donor! On sale as is! * Nkjdpju Nzxrjfx Ahvew

Condition: like new (used), Year of construction: 2023, functionality: fully functional, input voltage: 400 V, type of input current: AC, travel distance X-axis: 4,970 mm, travel distance Y-axis: 2,120 mm, travel distance Z-axis: 250 mm, number of slots in tool magazine: 24, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 30 m/min, spindle motor power: 12,000 W, mount diameter: 350 mm, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, spindle speed (max.): 20,000 rpm, spindle speed (min.): 600 rpm, tool weight: 8 g, Equipment: documentation/manual, Complete machine, with Coral filter system and SCM lifter for sale. The equipment has very little use. Numeric control machining centre, with mobile gantry and fixed worktable for the processing of solid wood and various types of materials: glued laminated timber, plywood, chipboard, MDF, Aluminium etc. Designed using the best three-dimensional solid modelling systems, the structure is composed of a machine bed and a mobile gantry made of electro-welded steel. Component's milling of machine bed are performed on high quality CNC machining centres, with one single positioning operation, in order to guarantee the very best planarity, perpendicularity and precise tolerances. The control unit is a numeric control interfaced with an industrial PC. The CNC solution with PC combines all of the qualities of numeric controls with the user-friendliness typical of personal computers. Nkjdpfewd Nrdsx Ahvow The PC allows to use the operator interface Maestro cnc, developed by SCM to make machine programming fast and simple even for the less skilled operator. Technical specifications: - drilled and tapped holes spaced 120x120 mm for vacuum connection of jigs and equipment fitting - groove scheme spaced 40 mm for suction cups or rubber gaskets - n. 2 working areas - max. dimension to work in Y direction = 2170 mm TELESOLVE teleservice via internet Mobile console with "eye-M PRO" integrated PC TECPAD - Remote machine control Mobile console with 7" touch-screen color monitor for control and management. PRISMA KT Machining Head The machining head with 5 interpolating axes, fixed directly to the mobile gantry, guarantees maximum strength during routing operations and provides top finishing quality also with high stock removal. Technical specifications: Routing unit with 5 interpolating axes − electro-spindle with HSK 63F quick release tool-holder − Rotation speed 600-20000 rpm − right and left rotation − max power (S1/S6) 11/12 kW (15/16.5 HP) from 9000 rpm − Inverter − C-axis rotation = 640° − B-axis rotation = 270° − C-axis equipped with TTS locking system (Total Torque System – SCM Patent) − "For Life" grease lubrication − liquid cooling with heat exchanger - Automatic dust extraction hood with four positions and ON-OFF by workpiece program. Two 250 (300) m3/h - 50 (60) Hz vacuum pumps Vacuum pump for each half-table. Independent vacuum circuit for each half-table. PRO-SPACE Safety system – full protection of the machining head with anti-ejection strips curtains and bumpers with emergency sensors - Emenency cable in the operator area - rear and side protection along the perimeter Enclosed cable-holder chain MAESTRO ACTIVE Human-Machine interface software (HMI) Maestro active is the new interface software (HMI) which has been unified across all SCM technologies. A single operator can easily and confidently run multiple SCM machines, reducing operator training times and facilitating entry into production. Windows 10 embedded 64 bit operating system Maestro cnc programming software MAESTRO CNC SOFTWARE SUITE – USER INTERFACE AND PROGRAMMING Advanced nesting free-form + Label module for Maestro cnc Rapid 24 - Rear Tool store Circular tool store anchored to the mobile gantry. Max load 96 kg

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Wheel offset: ET 120 Brake wear indicators (BVA) included The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. Nkedpoxplxzofx Ahvjw LIFT AXLE FUNCTION: Without lift axle. Including traction aid. TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminum spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 230 kg, hopper volume: 200 l, Food-grade sack emptying hopper Door with vertical upward opening Transparent plexiglass viewing window EPDM food-grade door gasket Round tube handles Removable grid – thickness 5 mm, mesh 20×20 mm Njdpfxsw Sddis Ahvekw 3 suction pipes Ø60 mm with reduction to Ø50 mm, suction capacity adjustable as specified Connection for level probe G1"1/2 (final third) Constructed entirely in AISI 304, total weight 230 kg, internal polishing

Condition: excellent (used), Used stainless steel barrel Last use: Pharmaceuticals Item number: 10747 Volume: 50 liters Type: Vertical Material (wetted parts): 14301 / AISI 304 Design: Single-walled Operating pressure according to type plate: 0.5 bar Tank dimensions: Outer diameter: 350mm Overall width: 350mm Total length: 350mm Cylindrical height: 380mm Opening: 200mm Total height: 780mm Nkjdpfordv R Aex Ahvew Materials: Interior: 14301 / AISI 304 External parts: 14301 / AISI 304 Equipment: Nameplate: no Side handles Gasket 2 x sight glasses 3 x nozzles

Condition: new, Year of construction: 2026, machine/vehicle number: SÇ 6000 S PVC FULL CNC KÖŞE TEMİZLEME MAKİNESİ, • Automatically cleans the burrs formed on the inner-outer corners and upper-lower surfaces due to melting during the corner welding process of PVC profile frames, with high precision and speed • CNC control system (2 axes) • Automatic profile recognition feature • Remote installation and support • Can be connected to four-head welding machines without requiring revision • Operates with G Code • Processing capacity of 160-200 frames per 8-hour shift • Equipped with a total of 10 cleaning tools • Cleaning of upper and lower surfaces for both white and colored profiles • Cleaning of upper and lower surfaces for coated profiles • Cleaning of inner and outer gasket grooves • Cleaning of both square and radius surfaces • Unlimited memory capacity and easy operation thanks to the 10" LCD HMI control panel Nedpfx Ahorbg Eusvskw • Long service life with automatic lubrication system (activated after every 60 frames) • Linear guide system • Unique software allows very simple operation and programming • Brushed support table system for easy rotation of profiles • Easy profile programming (handwheel) • Adjustable working speeds to desired levels

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 100 GOLD PLUS DÖRT KÖŞE KAYNAK MAKİNESİ, - Designed for joining four corners of PVC profile corners by welding them at the same time. - It is used to weld four corners of PVC profiles at the same time at an angle of 90 degrees. - 0.2 mm welding possibility for all profile types - Quick mold change system that prevents wasted time - High speed and precision welding thanks to axes controlled by servo motors and planetary gearboxes - With the PID system, heating degree and time parameters are adjusted independently of each other - Single corner welding capability - U (door without threshold) boiling system - 10.1" touch control panel - Boiling, cooling times and temperature settings are digitally adjusted according to the profile type - The Teflon surface can be changed quickly thanks to the roll-shaped Teflon PROFILE ; Nsdpercy Trsfx Ahvjkw - Max. weldable profile height 200 mm - Weldable Min. Profile Height 200 mm - Weldable Frame Minimum Width and length 410*495 mm, 520*520 mm (Gasket Printed) - Working angle range 90 degrees PRECISE MOVEMENT WITH SERVO MOTOR AND PLANETARY GEARBOX - Highly precise and error-free operation with axes controlled by high-speed and precise servo motors AND gearbox compatibility OPTION - Gasket pressing system

Condition: used, mileage: 290,000 km, power: 107 kW (145.48 HP), fuel type: diesel, gearing type: mechanical, overall weight: 7,490 kg, first registration: 06/2008, loading space length: 6,200 mm, loading space width: 2,200 mm, emission class: euro4, color: white, number of seats: 3, Year of construction: 2008, Equipment: ABS, air conditioning, central locking, had accident, navigation system, parking heater, soot filter, Chat now via WhatsApp: Engine damage!!! Probably cylinder head gasket, partly disassembled. Internal ID number: [ 626 ] ----Vehicle Highlights: 19% VAT deductible * German vehicle * Full service history * German vehicle * New engine installed 35,000 km ago with documentation (cost €11,000) * New tires * New brakes * New XXL sleeper cab for 2 persons * Air conditioning * Tow hitch on loading platform * Webasto auxiliary heater * Dragon winch, 9-ton pulling force with remote control * Aluminum platform, long version * Cruise control * Heated seats * Side storage boxes * and much more… * Gross weight = 7,490 kg * Payload = 3,800 kg ----Looking for leasing or financing? We offer attractive deals – even with zero down payment! Feel free to contact us. Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH, Rudolf-Diesel-Str. 2, 45711 Datteln, Germany Opening hours: Mon–Fri: 9:00 am–6:00 pm, Sat: 9:00 am–2:00 pm ----Note: All information on the internet is non-binding and intended only for general vehicle description. Errors, typos, and prior sale excepted. The binding condition of the vehicle derives exclusively from the purchase contract made on-site or through written confirmation. Nedoxffuuspfx Ahvskw Vehicles with a mileage of over 50,000 km or older than 3 years are primarily sold to our business customers.

Condition: excellent (used), Year of construction: 2011, year of last overhaul: 2025, Stürtz Production Line for Fully Automatic Manufacturing of PVC Window and Door Elements Four-Head Welding Machine SE-HSM-30/26 Compact + - Weld bead limitation 2.0mm (0.2mm possible) - Diagonal and parallel joining processes - Gasket limitation and holding stamp - Quick-change system for stamps - Welding parameters individually programmable - Min. welding dimension: 330 x 340mm - Max. welding dimension: 4000 x 2600mm (2600mm in feed direction) - Profile depth min.: 40mm - Profile depth max.: 120mm - Door welding with simultaneous threshold installation possible during the welding cycle - Screen dialog system - Windows operating system - PC with TFT monitor - USB ports - Keyboard and mouse - Data management via database Horizontal Buffer Station P-260-WST - For cooling section and transport - Working area: 3000 x 2300mm - Element size min.: 320 x 320mm - Element size max.: 3000 x 2600mm - Max. element weight: 80kg Corner Cleaning Machine 2MC; CNC Motion Control for processing 90° inner and outer corners on welded plastic windows - 2-axis drive 'Motion Control' - Freely programmable via screen-dialog control - Automatic profile recognition - Screen dialog system - PC with TFT monitor - USB ports - Keyboard and mouse - Data management via database Profile dimensions: - Profile depth 30 – 130mm - Visible width 30 – 130mm - Min. element size: 320 x 320mm (clear internal dimension 180mm) - Automatic compensating support, 60mm travel, for centering combined welded frames or sashes - Frame tip milling unit for trimming protruding frame corners and milling locking grooves - Corner hinge drilling unit for drilling the dowel holes and screw holes with 6-spindle drilling head - Drilling pattern: Winkhaus activ-pilot-concept Nkjdpfx Ahex Rpyujvow - Outer contour processing with saw blade - Milling disc for processing rounded sash overlaps, for Trocal 88+ Z-sash Top tool holder equipment - Gasket groove drilling and milling unit - Inner corner knife unit - Groove knife (visible side) Bottom tool holder equipment - Gasket groove drilling and milling unit - Inner corner knife unit - Groove knife (visible side) - Bevel punching unit bottom - Double spring-mounted, for removing welding beads from inner corners >15° - 1x for Elite (45°) - 1x for Knipping and Trocal 88+ (40°) - 1x for Inoutic NL profiles - Contour knife unit for radii - Disc milling unit for processing radii on foiled or acrylic-coated inner corners, spring-mounted - Chip conveyor belt with extraction device

Condition: used, This listing is for the J Engelsmann Jolting Volumeter STAV 11 with an Acoustic Hood The unit is in full working condition and is ready for immediate use Nodpfx Asxhdynehvekw Engelsmann Jolting Volumeter STAV 11) — a compact laboratory instrument used to assess the tamped density and volumes of bulk solids before and after compaction. The Jolting Volumeter STAV II, produced by J. Engelsmann AG, is a laboratory device engineered to measure the apparent (pre-compaction) and tapped (post-compaction) volumes of bulk materials—such as powders, granulates, and fibrous products—thus enabling calculation of tamped or tapped density Compliance with standards: Supports analysis in line with European Pharmacopoeia, DIN ISO 787 Part 11, ISO 3953, ISO 8967, and ASTM B 527-93 Adjustable tamping mechanism: Allows custom setting of the number of jolting strokes deviating from default programs Measurement cylinders: Compatible with a range from 10 ml to 1000 ml, with 250 ml typically standard; cylinders are interchangeable and secured via a strong retaining ring and gasket Ease of use and cleaning: Designed with a modern, rounded “soft design” that’s easy to clean and operate via a user-friendly display and control unit Optional accessories: Can be fitted with a sound-absorption hood for quieter operation

Condition: used, This listing is for the J Engelsmann Jolting Volumeter STAV 11 The unit is in full working condition and is ready for immediate use Engelsmann Jolting Volumeter STAV 11) — a compact laboratory instrument used to assess the tamped density and volumes of bulk solids before and after compaction. The Jolting Volumeter STAV II, produced by J. Engelsmann AG, is a laboratory device engineered to measure the apparent (pre-compaction) and tapped (post-compaction) volumes of bulk materials—such as powders, granulates, and fibrous products—thus enabling calculation of tamped or tapped density Compliance with standards: Supports analysis in line with European Pharmacopoeia, DIN ISO 787 Part 11, ISO 3953, ISO 8967, and ASTM B 527-93 Adjustable tamping mechanism: Allows custom setting of the number of jolting strokes deviating from default programs Measurement cylinders: Compatible with a range from 10 ml to 1000 ml, with 250 ml typically standard; cylinders are interchangeable and secured via a strong retaining ring and gasket Nkjdpfexhd E Rsx Ahvsw Ease of use and cleaning: Designed with a modern, rounded “soft design” that’s easy to clean and operate via a user-friendly display and control unit Optional accessories: Can be fitted with a sound-absorption hood for quieter operation

Condition: used, This listing is for the UXF300 Revco UXF Freezer The unit is in full working condition and is ready for immediate use Design & Build Robust upright footprint with high storage density: The UXF300 offers around 14.9 cu ft (421 L) of internal volume while maintaining a compact footprint—thanks to advanced insulation that increases vial capacity by up to 4.2%, translating to 76% more storage within the same space. Single outer door with multiple inner layers: The outer door integrates a heated 4×7 gasket (four touchpoints, seven protective zones) to prevent frost and temperature loss. Inside, five polystyrene-insulated inner doors further conserve cold when accessing samples. Controls & Monitoring Touch-screen control panel: The intuitive display allows adjustment of settings, user authority levels, and monitoring of freezer health around the clock. Extensive data logging: Built-in storage holds up to 15 years of temperature and event logs, which can be exported via USB. Remote integration: Supports 4–20 mA output or RS485 interfaces, making setup of external alarms and monitoring easy. Performance & Reliability Two performance modes: High‑performance mode provides tightest temperature uniformity and minimal fluctuation. Nkodpfxoxhd Hhe Ahvow Energy‑savings mode maintains acceptable control while saving up to 15% of energy

Condition: refurbished (used), Used storage tank made from steel in accordance with DIN 6616/2, double-walled with test certificate, above ground storage, with saddles, 1 manhole with PE-blind cover, gasket, screws and nuts (stainless steel). The tank has been cleaned professionally by us and equipped with an interior lining suitable for liquid fertilizer. Volume: 100.000 Liters Nkodpfx Ahshui D Esvjw Diameter: ca. 2.900 mm Length: ca. 15.750 mm Weight: ca. 18.800 kg At your request we can give the tank a new coat of paint and add a ladder with a platform. Optional equipment for the storage of liquid fertilizer: • Vacuum leak detector • Protective casing for the leak detector • Basic instruments for liquid fertilizer consisting of filler pipe, extraction pipe, ventilation pipe and sounding pipe • Liquid fertilizer pump made from Polyester 2" • Installation of the pump • Overfill protection • Anti-siphon valve and connecting pipes • Deadman switch • Additional connection for water admixture

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Nedpfjx Nugdex Ahvokw Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Semi-Trailer----Type: CR 47 Chassis: Two fully automatically welded I-beam longitudinal members with welded cross members, chassis width 1,400mm, 2" king pin, tilting cylinder: Hyva Axles and Suspension: Disc brakes 22.5” SAF axle assemblies 3x 9t with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, 1st axle liftable without tractor unit adaptation, 3rd axle liftable with Wabco Optiturn Rims and Tires: 6 wheels with tires size 385/65 R22.5, manufacturer’s choice on Alcoa Dura Bright aluminum rims in 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing Gear: Mechanical landing legs with two speeds, 2x 20t static load with swiveling foot, rear without support Electrical System: All lights in LED design, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis beam, yellow side marker lights in required quantity, rear position lights, front clearance lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lights installed at the level of the pivot bearing in aluminum consoles according to standard 97/28/CE-2007/35/CE, 1 LED work light on the vessel, yellow warning light at the rear mounted at the height of the hose pipes, 2x reverse lights in the underrun protection, 2x reverse lights at the height of the supports (each switchable at the power console) Tank Specification: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, capacity 47,000 liters, 24-month tank warranty from delivery. Operating parameters: Pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar - operating pressure 2.0 bar, operating temperature -40° to +80° Filling Options: 4 manholes DN 450 with swiveling and folding covers. Each cover is sealed under pressure with 4 wing nuts, rubber support for domed covers at the top for storage, rain strip closed at front, open at rear Material Discharge: 1 material discharge cone DN 800 made of INOX, foldable with INOX disc for material loosening, discharge cone swivels laterally, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: A 2.5” stainless steel air manifold pipe mounted on the right-hand operator side, a stainless steel air distribution pipe 4” mounted at the rear of the tank, air valves (shut-off flaps) in INOX, top air hose and air connection hoses feature 2” STORZ couplings, Micron filter, vacuum valve at the top of the tank, 1x vibrator 1m before the pivot bearing Njdpfx Ajx Nuftjhvjkw Access Ladder and Walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail with a separate foldable ladder section deployable from below with parking brake when open, 1 aluminum safety walkway along the upper left side of the tank, anti-slip coating on the tank Conveying Hose Storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum design

Year of construction: 2020, condition: new, Title Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate and Frame Filter Press – Year 2020 – NEW / Unused Short Description For sale: unused, factory-sealed plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in brand-new condition, have never been commissioned, and remain in their original packaging from the factory. Manufacturer Strassburger Filter GmbH + Co. KG (Germany) Model / Type SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Nksdpfx Aox Ihufohvjw Year of Manufacture 2020 Serial Number Among others: 032003303920 (additional serial numbers available) CE Marking Yes Condition Brand new / unused Factory-sealed Never installed, never used for production Stored in warehouse Quantity Available 4 identical units available New Price Original price €94,000 per unit (Total value for 4 machines: €376,000) Design / Material All stainless steel Plate and frame filter press Gasketed plates Pharma / biotech specification Hydraulic closure incl. hydraulic unit CE-compliant Technical Data Plate format: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Weight (filter frame): approx. 480 kg Weight (plate pack): approx. 120 kg Plate Pack 14 filter plates 13 filter frames 1 end frame 1 partition plate 28 filter layers per setup Hydraulics & Drive Hydraulic closure Hydraulic power unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Solenoid voltage: 24 V DC Compressed air requirement: 3.0 bar Connections Product inlets and outlets: DN25 Vent / drain: DN15 Connections according to DIN 11864-2 Drip tray included Areas of Application Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location Germany Inspection by appointment Immediately available