General condition used
Chyhgksb2i
tank volume 44.000 liters design standing form feet number of feet 6 pieces
Technical data / dimensions Diameter inside 3.000 mm Cylindrical height 5.950 mm Total height 7.750 mm
Equipment manhole / dome in cylinder Equipment disc tap, spray head, crane eyes Outlet DN50 DIN 11851 Remarks manhole approx. 350 x 450 mm last Intended use fruit juice
Material Condition Surface outside marbled Material product contact V2A 1.4301 (AISI304) Material feet...
140m3 stainless steel tank
Steel grade inside AISI321, steel grade outside AISI304 cone,
Bm2ni9yco
Wall thickness 5mm.
Dim. 4.15x 16.80.
The tanks are insulated with polyurethane foam 15 cm thick and covered with aluminum sheet.
We have 2 pcs.
The tanks were used in the production of beer.
We offer our transport to the customer.
Capacity: approx. 12000 litres
Standing, on feet
Dimensions:
Ø: approx. 1700 mm
Ground clearance: approx. 800 mm
Total height: approx. 6500 mm
Equipment:
- Residual drain butterfly valve DIN 100
Rguxz
- Round manhole, swivelling, NW 400, at the lowest point
- 2 tanks, equipped with "EUREKA" system
Tank size approx. 1500 x 1400 x 1200 mm high.
Stainless steel design, with propeller 1,1 kw, 350 UPM,
ceiling with inlet approx. 315 mm diameter and inspection opening
Etsw3bxg
We have 2 other identical components
Drip pan , Floor protection pan
Manufacturer Bauer Südlohn
TYPE BSW - 23
1900 mm x 1350 mm x 78 mm
Galvanized grating(load capacity 5000 kg/m²)
Wheel load 500 kg
Construction made of 3 mm steel plate
Qbdsz7
Weight. ca 238 kg
Contents. 172 liters
Accessible with pallet truck or forklift
Maximum number of barrels 60 liters: 21 pieces
Price 400 Eur net / piece
Used goods, see pictures
Delivery by arrangement and extra charge possible
General Location Bremen Condition used
Tank volume 46,000 liters Max. permissible operating temperature 50 °C Lower bottom Cone bottom Construction form hanging Stand form claws
Technical data / dimensions Diameter inside 3,000 mm Cylindrical height 6,000 mm Total height 9,200 mm Wall thickness bottoms 3 mm Wall thickness cylinder 3 mm Year of construction 2001
Equipment Technical documents Drawing Manhole / dome in top floor (DN 600) Nameplate Equipment Crane eyes Outlet available ...
96m3 stainless steel vertical tank with a side agitator.
Diam. 3.20 m + 50cm protruding agitator, height 12.70m.
Cbnpz3nolg
The tank is set on a flat bottom.
Capacity: approx. 9900 litres
Standing, on feet
Dimensions:
Cjfahfmg2w
Ø: approx. 1700 mm
Ground clearance: approx. 800 mm
Total height: approx. 5500 mm
Equipment:
- Residual drain butterfly valve DIN 100
- Round manhole, swivelling, NW 400, at the lowest point
- 4 tanks equipped with "EUREKA" system
General Location Westfalen Condition used
tank volume 54.168 liters construction standing form feet height adjustable
Technical data / dimensions Diameter inside 2.890 mm Cylindrical height 7.500 mm Total height 9.400 mm Wall thickness bottom 4.0 mm Wall thickness cylinder 2.5 mm Wall thickness top 3.0 mm
Equipment manhole / dome in the cylinder, in the top plate Type plate Equipment crane eyes Outlet present Remark slight adhesions Remarks 1 container with dents in the cylinder Last ...
60.000L Steel tank for urea and ammonium nitrate solution (UAN).
Bnwfhbb
Diameter 2,80m
Lenght 11.20 m
Equipped with platform and ladder
Painted with polyurethane paint from outside, and antycorrosive paint from inside.
We organize transport to other countries
Free loading
General Location Currently still installed in Switzerland (dismantling planned for Q4 2022 / Q1 2023) Condition used
Tank volume 50,000 liters Max. permissible operating temperature 50 °C Specific weight of the medium 1.2 (to/m³) Floors dished bottom Design standing form Feet Number of feet 3 pieces
C2bdu2to
Technical data / dimensions Diameter inside 4.000 mm Total height 5.900 mm Wall thickness bottoms 12 mm Wall thickness cylinder 10 mm
Equipment Technical documents Drawing, variou...
30m3 insulated stainless steel tank
Dim. 3.40x 6.80.
12 cm insulation, insulated with wool and metal sheet
Cxqxmq7
lower bottom insulated with polyurethane foam.
We offer transport with our own semi-trailer.
General Manufacturer ALFA-LAVAL Location outdoor storage Condition used
Tank volume 50.000 liters Construction standing
insulation insulation available insulation jacket hermetically welded material insulation jacket stainless steel
Equipment manhole / dome in the cylinder last Intended use dairy
Material Condition Material in contact with product V2A 1.4301 (AISI304)
Chyhjamupr
General Location Bremen Condition used
Tank volume 64.500 liters Lower bottom flat bottom Construction type upright Stand form flat bottom
Technical data / dimensions Diameter inside 3.460 mm Cylindrical height 6.800 mm Total height 7.550 mm Wall thickness lower bottom 3.0 mm Wall thickness upper bottom 2.5 mm
Equipment manhole / dome in cylinder Equipment spray head, crane eyes Outlet DN100 DIN 11851 Remarks slight adhesions Remarks manhole approx. 345 x 440 mm; outlet not at lowest ...
150m3 stainless steel tank with a side agitator
Haokqun93
Dim. 5x 8.5m
The tanks have a flat bottom and are placed on a steel structure.
Due to large diameter, the tank has to be welded on site. We offer our welding.
General Location Outdoor storage Condition used
tank volume 150.000 liters lower bottom flat bottom construction form standing form standing frame
Technical data / dimensions Diameter outside 4,200 mm Total height 11,834 mm Wall thickness lower bottom 4 mm Wall thickness cylinder 4 mm Wall thickness upper bottom 3 mm
0xsw0
Material Properties Material in contact with product V4A
100.000l stainless steel insulated tank
Equipped wth side agitator.
Insulation made of polyurethane foam
Overall diameter 4.25 m
Total height 9m
Kcbhtr
Set on a flat bottom (requires a concrete screed or a base).
General Manufacturer Gross Apparatebau Location 89340 Leipheim Condition used
vessel volume 27.800 liter vacuum 0.1 bar max. Overpressure 0.5 bar Floors dished heads Type of construction upright Stand form upright frame
Technical data / dimensions year of construction 2003
Equipment manhole / dome in the upper bottom Type plate Remarks Manufactured according to DIN6618 last Intended use Solvent
Cjcxg82a0x
30m3 stainless steel tank
The tanks have heating panel inside.
Diam. 2.95 m
Height 4.90 m
12 pcs available
The tanks were used to store wine.
Cf7angn9jn
Every tank is cleaned inside.
General Manufacturer Gross Apparatebau Location Bremen Condition used
vessel volume 21.600 liters vacuum 0.1 bar max. Overpressure 0.5 bar Floors dished heads Type of construction upright Standform Standframe
Technical data / dimensions Year of construction 2000
Knmi7p8u
Equipment manhole / dome in the upper bottom Type plate Remarks Manufactured according to DIN6618 last Intended use Solvent
50,000l steel tank for fire or drinking water with a seal of approval. The tanks are sandblasted and painted with anti-corrosive epoxy resin or PZH-approved paint.
Fc9u3phm0
Dim. 2.80x 8.5m
General Manufacturer Hagemann Location Outdoor storage Condition used
tank volume 40.000 liters design lying standing form feet number of feet 6 pieces
Insulation Insulation available
Equipment Type plate Outlet available Remark slight adhesions Remarks 1 manhole in the front bottom last Intended use Residual liquor tank in a brewery
Material composition Material in contact with product V2A 1.4301 (AISI304) Material feet Steel galvanized
Cgz9sammqn
General manufacturer Goavec location Belgium condition used
tank volume 150.000 liters construction form upright standing form flat bottom with slope
Insulation Insulation available Insulation jacket hermetically welded Material insulation jacket stainless steel
Technical data / dimensions Diameter inside 4.420 mm Diameter outside 4.530 mm Cylindrical height 9.850 mm Total height 11.000 mm
0xlmo
Equipment Technical documents Drawing Manhole / dome in cylinder Type plate Equipment...
General Location Outdoor storage Condition used
Tank volume 150,000 liters Max. permissible operating temperature 60 °C Type of construction upright upright frame
Ci9c9ui3ux
Insulation Insulation available Insulation jacket riveted
Technical data / dimensions Diameter inside 3,800 mm Cylindrical height 13,180 mm Wall thickness bottom 8 mm Wall thickness top 6 mm Year of construction 2006
Equipment Technical documents Drawing manhole / dome in cylinder Type plate Outlet 80 mm Re...
acid-proof tank with a capacity of 65m3 with polyurethane foam insulation and three heating or cooling sections (two sections are on the tank, the third on the funnel, the funnel is opened).
Encskkz
Price without foam insulation, trapezoidal sheet, wool insulation in the price of the tank. Price with insulation and trapezoidal sheet on request.
General Location Bremen Condition used
Container Volume 1.000 liters Design Container Standform Rack
Technical data / dimensions Total height 1.900 mm Total width 1.160 mm Total length 1.160 mm
Ci7vibkppi
Equipment manhole / dome in the upper bottom (DN 400) Equipment disc tap outlet DN80 DIN 11851 Remarks Traces of use Remarks frame made of V2A; container with minor dents; slight flash rust on the outside of the container; screw connections of the manhole cover incomplete last Intended use frui...
Insulated tank with a capacity 40 m3 of acid-resistant steel of AISI316 grade
Dim. 2.60x 9.20m
B79wdcq0ve
The tank was used in the food industry.
The tank has a dent at the top, but this only applies to insulation, the tank itself does not have any dents.
We organize transport to other countries
Free loading
General Location Bremen Condition used
tank volume 37.500 liters design standing form feet height adjustable number of feet 6 pieces
Technical data / dimensions Diameter inside 2.680 mm Cylindrical height 6.000 mm Total height 7.350 mm Wall thickness bottom 6.3 mm Wall thickness top 3.7 mm
Vq2qt33n
Equipment manhole / dome in cylinder Equipment disc tap, crane lugs Outlet DN65 DIN 11851 Note manhole cover missing Remarks Wall thickness cylinder: lower 2 segments approx. 2.7 mm; upper ...
200m3 stainless steel tanks
Number of items: 3
180m3 stainless steel tanks
The diameter is 4.70m
Height without legs is 14m
4,1mm wall thickness
Bjpgbyrrf2
5,1 bottom thickness
We offer transport with our specialized trailer to every region of Europe!
General condition used
tank volume 22.500 liters design standing form feet number of feet 4 pieces
Cfstsexuqs
Technical data / dimensions Diameter inside 2.980 mm Cylindrical height 2.750 mm Total height 4.450 mm
Equipment manhole / dome in the top Equipment spray head, crane eyes Outlet DN50 DIN 11851 Remarks Feet mostly made of mild steel; several former connections were welded shut by the previous operator Last use Foodstuffs
Material Properties Material in contact with product V2A 1.4301 (AI...
43m3 stainless steel tank
Bxixwxidzd
Dim. 3x 7.80
The tank has bottom head indentations and traces on the roller, which only affect the aesthetic value.
Dents can be repaired by us.
General Location Bremen Condition used
Container Volume 1.000 liters Design Container Standform Rack
Technical data / dimensions Total height 1.500 mm Total width 1.160 mm Total length 1.180 mm
Bn0ym9z
Equipment manhole / dome in the upper bottom (DN 400) Equipment disc tap outlet DN80 DIN 11851 Remarks Traces of use Remarks frame made of V2A; container with dents, especially in the lower bottom; stacking braces partly bent; 1 connection DN 40 in the container wall (see photos) last use fruit ju...
100.000L steel tank. Fire / drinking water
underground or above-ground
Mso7v
Dimensions 16.9 x 3.10m
wall thickness: 5mm
weight 8mm approx. 12t, weight 5mm approx. 9t.
The tanks are sandblasted by us, equipped and then
painted internally and externally with a corrosion-resistant epoxy resin coating.
As standard, the tank has a suction pipe with a suction basket, a breathing chimney, a supply and drain connector, a ladder and a hatch.
For an additional fee, we install a float valve and a manhole...
Acid-resistant tank 2300l with heating, insulation and stirrer.
1860 mm outside diameter
internal diameter 1590 mm
roller height 1280 mm
Vs90jm
total height 2950 mm
tanks used for mixing honey.
We have 4 pcs.
We offer transport with our specialized trailer to every region of Europe!
Stainless steel, insulated 250m3 tank
Steel grade inside AISI 321.
wall thickness 5mm,
cone thickness 15mm
Dim. 4.55x 22.95m
The tanks are insulated with 15 cm thick polyurethane foam and lined with aluminum sheets
We have 9 pcs.
Bnsv7938
The tanks were used in the production of beer.
We offer our transport to the customer.
The tanks have documentation (available below)
40m3 insulated vertical stainless steel tank with
AISI 304 propeller side agitator
Dim. 3.05 x 6.95 m (+15 cm protruding geared motor)
The entire tank is insulated. Insulation thickness 6 cm.
The tank is mounted on a flat bottom.
4 pcs available.
Cbnrdapwxq
Diameter 8.00 m,
Height 10.00 m.,
Qmwlt
Total weight 8.5 t.
The tank has a technical drawing.
The tanks are transported by us and welded at the customer's site.
50m3 stainless steel
tank The main tank is made of stainless steel with a cylinder thickness of 3mm, with styrofoam insulation covered with a carbon steel sheet, and the second layer covered with a stainless steel sheet.
Dim. 4.20x 5.80m
Cyllinder thickness 3mm
Bottom thickness 4mm
Qsmrt
1.5 kW agitator
The tanks are very clean inside, they were used in the food industry.
3 units available!
Machineseeker still biggest sponsors of 2nd German football league
Photo gallery: the 10 strongest forklift trucks in the world
How to receive 100% of our e-mails
Photo gallery: The World's 10 biggest excavators
10 valuable tricks for buying used machines online
Olympic Games: Machineseeker sponsors Team Germany
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.