1200L Sandblaster - TOP open

CORMAK KDP1200

Condition: new, Year of construction: 2024, Welding rotary table Protec KT 10 000 HV Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 Dimensions: Pedpfx Ask S D N Esdnjgw height tilted min: 1080mm height tilted max: 2200mm height horizontal min: 1400mm diameter of the clamping disk 2000mm length 3250mm, width 1780mm speed from 0,05 to approx. 0,6 rpm.

Year of construction: 2023, condition: like new (used), functionality: fully functional, positioner for 6t load speed: 0,03-0,6 rpm Pgjdpfxegl Ndmj Adnjw motorized tilting faceplate diameter 1.600mm availible also for renting

Condition: new, Year of construction: 2024, Ring Rolling machine ZOPF - model ZB 30/3 MD TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - manual adjusting of the center roller - working position horizontal and vertical (optional) - digital readout - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 20 mm - roller diameter: 76-86 mm - shaft rpm: 11 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 0,18 kW - adjusting way: 35 mm Pedsdktnvepfx Adnogw - weight: 85 kg - dimensions: 530x420x500 mm

Condition: excellent (used), Four-jaw chuck make Roto Record type DHK 315 x 4 short taper size 8 taper diameter 139,735 bolt circle diameter 171,4 mm diameter 315 mm Jaws individually adjustable Pgodpog Rxh Iefx Adnew

Condition: new, press capacity 60 kN oil volume 60 ml 5 - 40 Grad C weight 7 kg range L-W-H 430 x 350 x 100 mm Pneumatic impact wrench set 1/2 " 10 pcs. Nuts in 9, 10, 11, 13, 14, 17, 19, 22, 24 and 27 mm 1 pc. 1/2 "extension rod 1 pc. 4 mm Allen key In the storage case Pgodeu Imkkspfx Adnow

Condition: new, The Cedes Safe C200 Can height detection, object protection, safety evaluation device assembly has been discontinued by the manufacturer and can therefore no longer be procured. Therefore we already have developed a replacement control for these devices, which ensures continued overdoing for years. In this context, we provide spare parts, e.g. the Cedes Safe C200 Can is available for immediate repair by our technicians, on loan and free of charge, until the device control is replaced. Pedpfxjiwc Rlj Adnegw This means that the vertical-lift can be used continuously and the control exchange can be planned. Of course we can repair and modernize any other dynamic storage systems as well. Do not hesitate to ask for an offer !!!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 8044000703A, Siemens 840 D Control Country of manufacture: EU - Poland Voltage: 400V Dimensions: 3082x2260x1775 mm (with chip tray) 4228x2260x1775 mm (with chip conveyor) Machine net weight: 3400 kg TECHNICAL SPECIFICATIONS CTX 310 ecoline V1/V3 New Design Working capacity Max swing over bed: 330 mm Swing over cross-slide (X): 260 mm Max turning diameter: Ø 200 mm Chuck diameter: Ø 210 mm X-axis travel: 182.5 mm Z-axis travel: 455 mm Centre height: 190 mm Centre distance: 581 mm Feed drives Rapid traverse X and Z axes: 30 m/min Control: Siemens Sinumerik 840D Slim Line C axis with Siemens control Speed: 0 – 100 rpm Pgedpsw T Sqyofx Adnsw Torque: 112 Nm Accuracy: < 0.04° Spindle Spindle nose: 140 h5 mm Front bearing diameter: 100 mm Spindle bore: Ø 74.3 mm Max bar capacity: 51 mm Main drive with Siemens control Drive power (40% / 100% duty cycle): 16.5 / 11 kW Torque (40% / 100% duty cycle): 166.5 / 112 Nm Max speed: 5,000 rpm Turret Number of tool stations: 12 Tool interface: DIN69880 (VDI 3425) Disc diameter: 30 mm Change time (with locking): 0.95 sec Change time (without locking): 0.4 sec Tool turret with Siemens control Number of driven tools: 12 Drive power (40% duty cycle) at 4000 rpm: 8.4 kW Torque (40%): 20 Nm Max speed: 4,500 rpm Tailstock Automatic travel: 396 mm Quill bore: flange Max quill force: 400 daN Hydraulic unit Tank capacity: 50 L Max pressure: 50 bar Coolant system Tank capacity: 175 L Capacity with conveyor: 200 L Pump power: 0.85 kW Pump flow rate at 5 bar: 30 L/min Electrical connection Max power: 21 kVA Current: 400V Frequency: 50-60Hz Fuses: 33A Pneumatics Compressed air connection: 6 bar Environmental conditions Room temperature: +15 to +35°C Max humidity: 75% All information is provided without obligation and subject to possible errors or omissions.

Condition: used, Year of construction: 1980, bore capacity in steel (diameter) 23 mm x-travel 400 mm y-travel 285 mm Psdst Hw Sbopfx Adnjgw total power requirement 3 kW weight of the machine ca. 1.400 kg dimensions of the machine ca. m

Year of construction: 2024, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 Pgodpfxoqfcvij Adnsw - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, length:1800 mm Psdpfx Adjcxxu Dsnjgw width:1200 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:1,8 x 1,2 x 0,4 m