Used Gomaco Ghp 2800 for sale (1,828)

Condition: ready for operation (used), Creasing machine for corrugated cardboard, 4 creases, 3 knives Ijdpowxdcmsfx Ah Noht

Condition: ready for operation (used), Year of construction: 2004, This Josting ZFS 2800 veneer guillotine was manufactured in 2004. It features a cutting length of 2810 mm and an insertion height of 80 mm, suitable for a cutting range of 20 - 470 mm. Equipped with a light barrier safety device, swing-up protective gratings, and a telescreen positioning control for enhanced operational safety and precision. Consider the opportunity to buy this Josting ZFS 2800 veneer guillotine. Contact us for more information about this machine. Additional equipment • Light barrier safety device • Safety-oriented electric control • Swing-up protective gratings • Guide light as cut indicator • Telescreen positioning control • Fast table drive with swinging and drawing motion of knives • Simultaneous cuts of top and bottom knife • Automatic course of table, pressure bar, and knife movement • Intermittent operation of low noise drives precision hydraulic with 2 pressure stages and high-quality valves Machine Benefits Technical Machine Benefits • Cutting length: 2810 mm Ijdpjyap Snjfx Ah Noht • Insertion height: 80 mm • Cutting range: 20 - 470 mm • Drawing motion of knives: approximately 20° • Operating voltage: 400 v • Frequency: 50 cycles Extra Information Supplied with operating instructions Complete and ready for connection

Condition: ready for operation (used), controller manufacturer: Heidenhain TNC 530, empty load weight: 45,000 kg, total length: 11,055 mm, total width: 6,320 mm, total height: 4,140 mm, Type: DMC-4100LH 2800 mm tussen de kolommen!! MA-25 2-assige universele freeskop - 20 kW - 6000 tpm C-bereik: 0-360° Bereik A-as: +/- 110° Koeling door spindel 40 bar Totaal vermogen: 67 kW Geen fundering nodig! De Johnford DMC-serie dubbelkoloms brugfrees met bewegende tafel is gemaakt van een eendelige Meehanite gietijzeren brug/kolomconstructie die naar verluidt 30 procent minder vloeroppervlak in beslag neemt dan vergelijkbare verticale bewerkingscentra met een C-frame. De brugfrees is verkrijgbaar in versies met zowel een bewegende tafel als een schuifkolom (vaste tafel), variërend van 91 x 91 x 76 cm tot 18 x 6 meter. De brugfreesmachines hebben een lange basis met volledige ondersteuning van de tafel over de volledige 130 cm Y-asverplaatsing, waardoor zware lasten kunnen worden bewerkt. De Y- en Z-as dragen te allen tijde een vaste belasting, terwijl de X-as de enige dynamische belasting draagt, wat zorgt voor een nauwkeurige bewerking met nauwe toleranties tijdens bewerkingen met hoge snelheid. Omdat er geen tafeloverhang is, worden de helling en gierhoek van de X-as geëlimineerd. De afstand tussen de hartlijn van de spindel en de kolom is geminimaliseerd, wat zorgt voor extra stijfheid. De zwaar geribbelde gietijzeren constructie van de machine zorgt voor een lange standtijd en een optimale oppervlakteafwerking. De combinatie van dubbele schroeftransporteurs en een rupsband zorgt voor volledige spaanafvoer met minimale handmatige reiniging. Daarnaast wordt eindige-elementenanalyse (FEA) gebruikt bij het ontwerpen van elke brugfrees, waarbij de effecten van realistische omstandigheden, zoals trillingen, hitte, vloeistofstroming en andere fysieke invloeden, worden gesimuleerd. Longitudinal travel X-axe: 4100 mm Cross travel Y-axe: 2800 mm Travel Z-axe: 800 mm Dimensions clamping space- table: 4200 x 2400 mm Power on spindle: 30 kW Admission in millinghead (ISO): BT 50 Max speedrange: 6000 rpm Ihodpfxsxp Sk Ds Ah Net

Condition: used, self centering hub (5146) Ihjdpfx Ahsdb Uzxs Njt Make WMW maximum 2800 RPM.

Condition: used, Glaser flat steel bender HAWE HC4L/3,0 Hydraulic see pictures Ihedpfx Aheu Da Afj Net

Condition: new, fuel type: diesel, color: white, gearing type: mechanical, * Vehicle no. for customer inquiries: 1-225000 *Former gross list price at the time of delivery: €111,164. You save 23% (€25,603) Vehicle location: Hirschberg · Im Rott 1 · Tel. * natural white * Airbag, driver * Body equipment * Batteries, 2 x 12 V/100 Ah, maintenance-free * Limited-slip differential lock * Spare wheel holder, double-secured * Driver comfort suspension seat, horizontal suspension * Manual for digital tachograph, German * Hand throttle for engine speed * Automatic climate control * Reversing warning system * Heated rearview mirrors * Signs/Signage, German * Rear axle stabilizer * Traction tires, rear Ihodpfx Aex T Ipash Not No liability for printing or typographical errors Subject to prior sale and confirmation

Condition: used, Year of construction: 2008, Transnorm Rising falling Incline belt conveyor with leading belt GF 800+2800+650-700-600 RA2205 Technical data: Iodpeq I Ty Rofx Ah Njht Conveyor length (NL): 4250 mm ( 800 mm arch + 2800 mm riser segment + 650 mm leading ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R17DT71D4/BMG/TH Electrical data: 50Hz V380-500, kW 0,37 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: refurbished (used), Year of construction: 2012, LYISH Rewinder for Toilet paper and Hand towel rolls, and NON-woven rolls. Standard pyramid pattern for max volume. Rolls are perforated to length of 115mm (other sizes can be adjusted) Rolls length setting on PLC screen. The rolls are sealed with glue line and tail cutting. Also optional - coreless rolls production on Stainless steel mandrel Specifications: - Rewinding speed (max.) 350 m/min - Paper width – 2.75 m (Max) - Parent reel dia. – 1.25 m (Max) - Product dia. 350 mm (max.) - Pneumatic lifting arms for jumbo roll - Paper grade 17-70 g.s.m. single or double ply - Perforation – standard system includes 4 rotating blades, distances between perforation lines changes by changing gears. - Embossing – steel to rubber, standard pyramid pattern (special pattern – optional). -Core guiding system for logs – preventing conic edges during rewinding of large diam rolls - Finishing station including glue injection, cutting and turning the rolls for adhesion forming a tail seal. - Automatic ejection of finished rolls sideways out of the machine. - Machine is supplied as standard together with two 75 mm dia. mechanical shafts for the jumbo roll. - Power – 18 kw - Weight – 6500 kg Ihjdpfjd Skg Rjx Ah Not The machine was refurbished by the producer - LYISH , and will be supplied with guarantee for 12 months. On line Slitting system (Slitter-Rewinder) - optional, can be added if required. Edge embossing system - optional (can be added if required) Full CE safety covers - optional (can be added if required)

Condition: used, Electric motor, three-phase motor -Manufacturer: ZP, electric motor type 100 Ihodor U Sfkspfx Ah Not -Power: 3.3/2.6 kW -Speed: 2800/1400 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Dimensions: 355/235/H200 mm -Weight: 24 kg

Condition: good (used), brake motor, electric motor, three-phase motor Iodpfodlbcmex Ah Neht -Power: 0.25 kW -Speed: 2800 rpm -Shaft: Ø 11 mm -Design: B14 -Protection class: IP 54 -Quantity: 2 available -Price: per piece -Dimensions: 275/122/H185 mm -Weight: 6.6 kg

Condition: excellent (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 176 mm -Drum length: 430 mm -Speed: 2800 rpm Ihsdpjb A I Ixjfx Ah Not -Power: 3 kW -Shaft mount: Ø 28 mm -other sizes also available in stock -Weight: 50 kg

Condition: good (used), Clamping plate with T-slots Plate field Welding table Welding table Plate boring machine -Width: 795 mm -Length: 2800 mm -Height: mm -Plate thickness: 35 mm -Working height: 960 mm Ihedpscba Tyofx Ah Not -Plate with: support ribs -Groove width: 22 mm -Dimensions: 860/2870/H960 mm -Weight: 1470 kg

Condition: excellent (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines -Drum: Ø 199 mm -Drum length: 384 mm -Speed: 2800 rpm -Power: 2.2 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 67 kg Iedpfxsb A I Iyj Ah Neht

Condition: good (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines Ijdjb A I I Ajpfx Ah Neht -Drum: Ø 192 mm -Drum length: 465 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30/60 mm -other sizes also available in stock -Number: several engines available -Weight: 70 kg

Condition: excellent (used), Motor roller, drum motor, belt sander, belt grinder -Spare part for: EHEMANN grinding machines Iedpfsb A I I Hjx Ah Neht -Drum: Ø 194 mm -Drum length: 460 mm -Speed: 2800 rpm -Power: 4.4 kW -Shaft mount: Ø 30 mm -other sizes also available in stock -Weight: 74 kg

Condition: good (used), Electric motor, three-phase motor -Replacement motor: for pressure blower -Power: 3.0 kW -Speed: 2800 rpm -Shaft: Ø 19 mm Ijdpfjcwn Hijx Ah Nsht -Construction: B5 -Protection class: - -Dimensions: 390/320/H320 mm -Weight: 24 kg

Condition: good (used), electric motor, three-phase motor -Manufacturer: rotor, electric motor type 5RN71M02 Iodpfoh A Iymex Ah Neht -Power: 0.55 kW -Speed: 2800 rpm -Shaft: Ø 14 x 25 mm -Design: B3 -Protection class: IP 55 -Dimensions: 240/138/H180 mm -Weight: 6.5 kg

Condition: good (used), electric motor, three-phase motor Iedev Ia Ilopfx Ah Nsht -Electric motor: Type DM 63 K 2 -Power: 0.18 kW -Speed: 2800 rpm -Shaft: Ø 11 x 22 mm -Design: B3 -Protection class: IP 55 -Dimensions: 220/163/H150 mm -Weight: 6.5 kg

Condition: used, Year of construction: 1999, conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Manufacturer: Paal's, conveyor belt conveyor belt with container structure -Speed: 25 m/min -Conveyor belt width: 960 mm -Conveyor belt length: 2800 mm -Conveyor belt drum: Ø 170 mm x 1040 mm Isdpfx Astlzdxsh Noht -Motor/gearbox: SEW-Eurodrive 1.1 kW -Total dimensions: 3050/1450/H1500 mm -Weight: 540 kg

Condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor -Roller conveyor: with tilting function, solid design -Speed: 14 m/min -Roll width: 1200 mm -Roll diameter: 108 mm -Axle distance: 150 mm Ihedpfx Ahetlzfrs Not -Conveyor length: approx. 2800 mm -Tilt function: hydraulic, approx. 20° -Total dimensions: 3100/2300/H2000 mm -Weight: 1390 kg

Condition: excellent (used), Electric motor, three-phase motor -Manufacturer: Elektrim, electric motor type Sh 80X-2C -Power: 1.5 kW -Speed: 2800 rpm -Shaft: Ø 19 x 40 mm -Height of shaft axis: 80 mm -Design: B3 -Protection class: IP 55 Isdpfx Aev Hyb Ash Njht -Dimensions: 310/160/H200 mm -Weight: 11.5 kg

Condition: used, Three-phase motor, electric motor -Manufacturer: Elektror, electric motor for radial fan type D-06 / S484 -Power: 0.5 kW -Speed: 2800 rpm -Shaft: Ø 14 x 35 mm -Protection class: B TROP Ihedoupbc Aspfx Ah Not -Dimensions: 295/200/H150mm -Weight: 6.5 kg

Condition: used, roller conveyor, roller track, driven roller conveyor, roller conveyor -Roller conveyor: with tilting function, without hydraulic unit -Drive motor: kW rpm Ihsdpfx Ahjuhr S Dj Njt -Speed: 14 m/min -Roll width: 1200 mm -Roll diameter: 110 mm -Axle distance: 150 mm -Conveyor length: 2800 mm -Tilt function: hydraulic, approx. 20° -Wooden board: 2500 x 1700 mm -Total dimensions: 3100/2300/H2000 mm -Weight: 1180 kg

Condition: good (used), electric motor, three-phase motor -Electric motor: type T 71A 2 AB3 -Power: 0.37 kW -Speed: 2820 rpm -Shaft: Ø 14 x 30 mm -Protection class: IP 54 Isdpfxov Hzmyj Ah Neht -Dimensions: 245/140/H170 mm -Weight: 5.8 kg

Condition: good (used), Sewing machine motor, lighting current motor, electric motor -Manufacturer: Pfaff, sewing machine motor type PCD 321 -Power: 0.245 kW -Speed: 2800 rpm Ijdpfeg Dg R Eox Ah Noht -Voltage: 220/380 V 50 Hz -Shaft: conical Ø 11/15 x 21 mm -Sewing light connection: 12 V 15 W -Dimensions: 340/190/H320 mm -Weight: 19 kg