Used Pressure Filler for sale (14,973)

Condition: used, Year of construction: 2008, Capacity: 360 Bo/h Filling points: 6 pieces Voltage: 230 V Dedpfsvcqhrex Aa Eocd Compressed air: min. 6 bar Length: 1590 mm Width: 700 mm Height: 1875 mm Formats: 0.33 L, 0.50 L, 0.7 L, 0.75 L, 1.0 L, 2.0 L, 3.0 L, 5.0 L Base construction: Steel rack Features: inlcuding add-on parts, filling programm modifiable

Condition: used, generalüberholt, Druckfüller Sparkling ,So2 Medium mit Vorevakuierung Füllstellen: 16 Laufrichtung: rechts-links (gegen UZS) Djdsx Hta Djpfx Aa Eecd

Condition: like new (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, water tank capacity: 10,000 l, Complete mineral water and soft drink production plant for sale, available with brands, staff, or standalone. The production line features a mixed configuration, allowing both glass and PET bottle products to be manufactured on the same line. The machine list is available in the documents along with information about the company. Dodpexm Rmxofx Aa Eecd The machines have seen little use since 2019 and remain in good condition.

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. Dcsdpfxjtrdyre Aa Eed The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Condition: used, Year of construction: 2002, TETRA PAK TBA 21-1000 SQUARE ASEPTIC FILLER YOM 2002 V050 52.000 RUNNING HOURS Dodpfsx Agmyex Aa Eocd CAPACITY 7000 CARTONS PER HOUR VERY GOOD CONDITION COMPLETED BY THE TCA88 1000 SQUARE APPLICATOR (SOME PARTS MISSED) DISMANTLED AND STORED IN POLAND, LASK CITY.

Condition: ready for operation (used), Can filler for several can sizes and formats suitable. For example for fish or meat cans or vegetables. Dcsdpjvy Trhsfx Aa Eod

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, New filling machine / dosing machine, suitable for filling a variety of liquids. Examples include: - Milk - Water - Alcohol - Disinfectants - Etc. Dedpjrivxcjfx Aa Escd This is a robust machine that operates on compressed air and 220V, Plug and Play! It is ideally suited for filling small batches. Only a very small air compressor is required to operate the machine; if desired, this can be supplied as well. We recommend at least a 12L compressor. The filling machine is equipped with a 1000ml cylinder, allowing it to dispense a maximum of 1000ml per stroke. For larger volumes, multiple strokes can be programmed. For example, 2500ml can be easily filled in 2 x 1250ml. The minimum dosage per stroke is 100ml; any volume between 100 and 1000ml can be filled in a single stroke. We also offer models with cylinders up to 5000ml per stroke. The unit comes with a suction hose, enabling direct suction from a barrel or IBC container. The machine features a foot pedal and an automatic mode. In automatic mode, the machine will continuously fill, making it simple and fast to handle larger quantities. The foot pedal allows for manual filling at your own pace. Depending on the operator and the volume per fill, between 15 and 25 units per minute can be filled, making this a very fast machine. The machine weighs approximately 15-20kg and can be conveniently placed on a table. Entirely constructed from stainless steel, it is a very high-quality, industrial-grade machine. For questions, please feel free to email; we are happy to assist with this or another machine. We also supply a labelling machine which is a perfect match for the filler. We strive to respond to your inquiries within 24 hours. Of course, we are also available by phone. Our office hours are Monday to Friday, 09:00–17:00.

Condition: excellent (used), functionality: fully functional, Year of construction: 1996, Aseptic filler for drums Asepsystems with 2 heads 1" plug with homogenizer and sterilizer. Dodpfjq Rdhuex Aa Ejcd

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: CDE:D09C236, CORIS /HERMES 9600 Vial Blower & Filler Line, made in France. Consisting: - a bottle pack blowing machine, with 2 formats (60ml and 30ml), - a HERMES 2009 filling machine with 2 drive rings 10 slots, - a cap dispenser, - laminar flow, - spare parts, - belt conveyor 2200mm x 40mm, sold without peristaltic pump. YOM 2010 EXCELLENT CONDITION Dcedortnlajpfx Aa Eod

Year of construction: 2020, condition: new, PLC microprocessor control Dsdpofz Dvvefx Aa Eecd • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel Dsdpfx Aofz Ax Ssa Eecd • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Dedoflpmqspfx Aa Escd Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Dcsdpjfzrapsfx Aa Ejd User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Dedpfx Aaofz A D No Eecd Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: ready for operation (used), Year of construction: 2017, We sell 20 l hydraulic sausage filler on photos Dodew Hc T Hjpfx Aa Escd

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN - used - PC control with optimization, scoring unit, automatic cutting length detection, side pressure device, air cushion tables, stepless feed of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, cutting width: 4,200 mm, max. cutting height: 72 mm, number of clamps: 6 pcs, max. saw unit feed: 100 m/min, max. rip fence feed: 80 m/min, main saw motor power: 11 kW, scoring saw motor power: 1.5 kW, main saw blade Ø: 300 x 30 mm, scoring saw blade Ø: 180 x 30 mm, dust extraction port Ø bottom: 140 mm, dust extraction port Ø at pressure beam: 3 x 100 mm, airflow: 5,000 m³/h, compressed air connection: 6 bar, air consumption: 140 l/min, Dcedeyrqrtjpfx Aa Esd rated current: 38 A, max. pre-fuse: 50 A Quality information: - complete basic inspection - complete basic cleaning - electrical system checked - immediately ready for operation

Condition: used, Used item Features and technical data: - with manual changeover lever, painted, stable - Connection diameter: 350 mm Dimensions: approx. 1240 x 900 x 450 mm Availability: short-term Dcsdpfx Aeyq T Izoa Eod Storage location: 63934 Röllbach

Condition: excellent (used), radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan Dedpfx Asypu Uysa Ejcd -Exhaust exhaust fan: heat-resistant -Dust extraction fan: radial fan -Engine: 90 kW 1480 rpm -Connection: Inlet Ø 390 mm -Connection: Output Ø 390 mm -Fan wheel: Ø 1220 mm (drawing in the pictures) -Volume flow rate: m³/h -Dimensions: 2610/2030/H2080 mm -Weight: 1950 kg

Condition: good (used), Pressure shoe for Weinig planer and moulder Dodsyryzkopfx Aa Ejcd

Condition: excellent (used), 4 Bag fillers for sale all working call or email for inquiries Dcedpfx Aajyryqxo Esd

Condition: good (used), Year of manufacture 2008, 3,160 operating hours, newly serviced, very well maintained, NEW HD pump by FALCH Dodpfx Aowy Ellsa Ejcd

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,150 mm, total width: 900 mm, total height: 1,910 mm, Eccentric press with a pressing force of 16 tons. Machine characteristics: - Open back - Fixed table - Cross-mounted crankshaft - Friction clutch - Rigid and robust machine construction - Horizontally positioned crankshaft - Dry pneumatic clutch - Lifting balance device - Safety valves - Manual operation Technical data: PRESSING FORCE: 16 T STROKE UNDER PRESSURE: 2 mm SLIDE BLOCK STROKE: 0-70 mm STROKES PER MINUTE: 125 min-1 MAXIMUM ADJUSTABLE DIE HEIGHT: 170 mm DISTANCE FROM SLIDE BLOCK TO FRAME: 170 mm WORKTABLE DIMENSIONS (W x D): 320 x 480 mm DIAMETER OF THE HOLE IN THE WORKTABLE: Φ100 mm HOLE DIMENSIONS (W x D x Depth): 160 x 240 x Φ210 mm SLIDE BLOCK DIMENSIONS (W x D): 180 x 200 mm Dsdeyrr E Iepfx Aa Ejcd SHANK HOLE SIZE (Dia. x Depth): Φ40 x 60 mm DISTANCE BETWEEN COLUMNS: 220 mm TABLE THICKNESS: 60 mm MAXIMUM INCLINATION ANGLE: 25° MOTOR: 1.5 kW MACHINE DIMENSIONS: 1150 x 900 x 1910 mm WEIGHT: 1,400 kg Equipment: - Light curtains - Mechanical guards - Ejector in lower table Delivery to customer possible. Delivery cost according to individual freight company quotation.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 150 bar, empty load weight: 125 kg, input voltage: 400 V, fuel: electricity, warranty duration: 6 months, KRANZLE LX 2000 COLD WATER PRESSURE WASHER This device features new accessories, including a German R+M gun, stainless steel lance, steel-braided hose, and power nozzle. A built-in hose reel allows for easy rewinding and storage. A durable brass head with new ceramic pistons and seals guarantees long and trouble-free operation. A highly efficient three-phase motor ensures stable operation even during prolonged use. Djdoyrfuispfx Aa Escd With operating parameters of 150 bar and 1920 l/h, the machine can be effectively used for heavy-duty work in construction, logistics, and agriculture. Each device we offer has individually taken photos; you are buying exactly what you see. TECHNICAL DATA: Power supply: 3 phase - 400 V - 50 Hz Discharge capacity (l/h): 1920 Pressure Working pressure (bar): 150 Maximum pressure (bar): 175 Connected power (kW): 9.6 Weight (kg): 125 Hose length (m): 20 EQUIPMENT: NEW durable pressure gun from the German brand R+M NEW stainless steel pressure lance NEW reinforced 20m steel braided pressure hose NEW adjustable nozzle WATER FILTER AND GEKA CLAW COUPLINGS - FREE KEY FEATURES: Open oil system - no operating time limits Very clear and intuitive control panel Simple design and easy access to individual components under the housing make the machine user-friendly and easy to service

Year of construction: 2026, condition: new, New machine Year of manufacture: 2026 Partnership Edition General features: - Aluminium machine and extension tables - Saw unit tiltable up to 46° - Pressure beam including LED lighting with 3 different status colors: WHITE: Machine in idle position RED: Pressure beam lowering or emergency stop function BLUE: Saw unit moving; variably positionable support table 1,000 x 500 mm - Scoring system using main saw blade in the same direction of rotation - Automatic workpiece length detection for minimal travel distances - Mobile and height-adjustable control panel including: saw blade holder, template holder, emergency stop button, start button, selector switch Scoring/grooving saw, rotary switch for feed speed, switches for laser (option) and USB socket Partnership Edition includes: - Motorized rip fence with 4 aluminum stops, synchronized positioning. Dodpoyncpcjfx Aa Ejcd All four stops adjustable up to 1,300 mm. The table is approx. 2,000 mm long. - Windows 10 screen control (10'' touchscreen). The graphical interface offers the following functions: tool database, miter cut calculation at the length stop, cutting plans can be created and saved, programs can be saved, exported, and imported via USB. - Telescopic stop extendable to 3,400 mm including 2 digital displays Technical data: - Max. saw blade protrusion 350 mm blade: 100 mm at 90° / 70 mm at 45° - Saw blade: diameter 300 – 350 mm, bore 30 mm - Saw blade speed: 4,000 rpm - Motor: 5 kW (approx. 7.5 hp) - Feed speed: 0 – 40 m/min - Overall length: approx. 4,250 mm - Weight: approx. 1,300 – 1,700 kg (depending on cutting length and equipment) - Required air pressure: 7 bar - Extraction ports: 1 x 100 mm, 1 x 120 mm Includes: - Motorized rip fence with 4 aluminum stops, adjustable up to 2,100 mm instead of 1,300 mm - Cutting line laser - Saw motor with 7.5 kW (10 hp) including automatic star-delta startup - Programmable saw blade height adjustment including height correction when tilting the saw unit - Mitre fence tiltable +/- 50° with length compensation Location: Flörsheim am Main Availability: by arrangement

Condition: used, mileage: 271,542 km, power: 368 kW (500.34 HP), first registration: 01/2008, fuel type: diesel, tire size: 385/65r22,5, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, fuel tank capacity: 600 l, color: white, gearing type: mechanical, number of gears: 12, emission class: euro5, suspension: steel-air, Year of construction: 2007, Equipment: air conditioning, electric window regulation, trailer coupling, Front axle: Tyre size: 385/65r22,5; Suspension: leaf suspension Dcjdpfxoyrd Nro Aa Eod Rear axle: Tyre size: 315/80r22,5; Double wheels; Suspension: air suspension Drive: Wheel Number of cylinders: 8 Engine capacity: 15.600 cc GVW: 19.000 kg Make of engine: Scania