Used Galvanotechnik Leipzig for sale (681)

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 12018, travel distance X-axis: 2,750 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, spindle diameter: 130 mm, spindle speed (max.): 1,000 rpm, TECHNICAL DETAILS Spindle diameter: 130 mm Drilling spindle speed: 3 – 1,000 rpm Travel range X-axis: 2,750 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 1,250 mm Nedpfxozb Davj Ad Sewh Travel range B-axis (table): 360° Travel range W-axis (spindle, longitudinal): 900 mm Table dimensions: 1,600 mm x 1,400 mm Maximum table load: 6.3 t Tool holder: SK50 MACHINE DETAILS Control system type: CNC Control model: TNC 155 path control Total power requirement: 100 kW Dimensions & Weight Dimensions of control cabinet (L x W x H): 650 mm x 2,800 mm x 2,100 mm Machine weight: approx. 15 t EQUIPMENT Planoslide feed 210 mm (U-axis) Hydraulic unit Outrigger with control panel Measuring system (manufacturer: Heidenhain)

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 22076049, spring diameter: 120 mm, wire diameter (max.): 9 mm, power: 18 kW (24.47 HP), wire diameter (min.): 2 mm, production capacity: 5,400 unit/h, The machine was equipped with a new control system in the year 2000! A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right-hand and left-hand coiled compression and tension springs, as well as leg springs. The springs can be produced with any desired pitch and spring body shape. Nwodpfx Adszb Daps Soh TECHNICAL DETAILS Wire diameter max.: 9 mm Wire diameter min.: 2 mm Production capacity max.: 90 pieces/min Outer spring diameter: 10 - 120 mm Wire feed speed: 27 - 80 m/min Wire feed length: unlimited Two-finger system Wire thickness: 2 - 9 mm Outer spring diameter: 10 - 120 mm Single-finger system Wire thickness: 3 - 7 mm Outer spring diameter max.: 60 mm MACHINE DETAILS Operating voltage: 380 V / 50 Hz Control voltage: 220 V Total power requirement: 18 kW Dimensions & Weight Machine dimensions (L x W x H): 3,300 x 1,500 x 1,450 mm Lubrication system dimensions (L x W x H): 830 x 650 x 1,000 mm Control cabinet dimensions (L x W x H): 700 x 1,500 x 1,750 mm Machine weight: approx. 5 t EQUIPMENT 5x feed rollers, wire holder 3 mm, two-finger Spring length measuring device (Model: LION PRECISION-PANTHER) Wire coil holder POST, motor-driven, mandrel holder (diameter: 1,400 mm) Lubrication system Control cabinet cooler RITA Hydraulic unit

Condition: good (used), 88 units of picking carts, Wanzl – used: Price per unit, ex works: only €125.00 (net) Manufacturer: Wanzl Type: unknown Year of manufacture: unknown Dimensions: 1500 x 607 x 2073 mm Most have a grid back panel and three to four intermediate shelves 2 swivel casters, 2 fixed casters Nwjdpfx Ajzbyhved Soh Push handle Condition: good Available: immediately Location: Leipzig area

Condition: new, Telescopic support for parking semi-trailer trucks, dancop telescopic support – New: Price ex works: €700.00 (net)! Manufacturer: dancop Type: unknown Year of manufacture: unknown Width: 760 mm Weight: 71.58 kg Maximum lifting height: 1344 mm Height: 1025 - 1344 mm Height adjustment: manual Material: steel Surface: powder-coated RAL 1023 traffic yellow Width of base plate: 470 mm Depth of base plate: 425 mm Height of base plate: 10 mm Color of base plate: yellow Depth: 670 mm Nwsdpfjzbyg Eox Ad Sjh Load capacity: 40000 kg Current new price: approx. €1,200.00 (net) Condition: very good, unused Available: from approx. August 2026 Location: Leipzig

Condition: good (used), Year of construction: 2006, Column-swiveling crane, SchmidHandling, with Demag chain hoist, 125kg – used: Price ex works: €1,750.00 (net)! Nwsdpfxjzbyfuo Ad Seh Manufacturer: SchmidHandling Type: (to be specified) Year of manufacture: 2006 Factory number: 61482006 Load capacity: 125kg With Demag electric chain hoist 125kg Outreach: to be specified Condition: good Available: from approximately August 2026 Location: Leipzig

Condition: good (used), Year of construction: 2009, Column-slewing crane, steel / Konecranes, 250kg, outreach 4.09m – used: Price (column with jib only) ex-works: €1,750.00 (net)! Manufacturer: Stahl / Konecranes Type: AS2.5-4.5 Year of manufacture: 03/2009 Factory number: PO10062432 Load capacity: 250kg Outreach: 4.09m Vertical pin distance: 850mm Approval No. 920309/01 Condition: good Nwjdpezbyfhjfx Ad Seh Available: from approximately August 2026 Location: Leipzig

Condition: good (used), Year of construction: 2024, Refrigerant dryer, OMEGA AIR, RDP 75 – used: Price ex works: €750.00 (net)! Manufacturer: OMEGA AIR Type: RDP 75 Year of manufacture: 2024 Nominal flow rate: 75 m³/h Max. operating pressure: 16 bar Ambient temperature during operation: 1 °C to 45 °C Max. air inlet temperature: 55 °C Ph~V-Hz: 1~230-50/230-60 | 0.40 kW Nsdpfjzbydwox Ad Sewh Protection class: IP20 Contains fluorinated greenhouse gases Refrigerant: R513a | 0.39 kg | CO₂ equivalent 0.22 t Operating hours: unknown Condition: good Available: from approximately August 2026

Condition: good (used), Year of construction: 1999, Screw compressor, Renner, screw compressor RS-PRO 7.5, soundproofed, incl. refrigerant dryer ECOTROC KTD-B100 – used: Price ex works: €2,950.00 (net)! Manufacturer: Renner Type: RS 7.5-10 Year of manufacture: 1999 Serial No.: 1992 Article number: 07500001 Rated power: Motor speed: Max. operating pressure: 10 bar Power consumption: 7.5 kW Delivery rate: 950 l/min Operating hours: approx. 4,342 h (as of 21.04.2026) Weight: 198 kg Incl.: Manufacturer: KSI FILTERTECHNIK Type: ECOTROC KTD-B100 Serial No: 31-11-MA11834 Max. pressure: 16 bar Nom. capacity: 97 m³/h Max. amperage: 2.1 amps Fuse amperage: 4.0 amps Njdpfxezbydqj Ad Sowh Refrigerant: R134a Refrigerant quantity: 0.75 kg Voltage: 230V / 1 / 50 Hz Power: 0.35 kW Condition: good Available: from approximately August 2026 Location: Leipzig

Condition: good (used), Year of construction: 2008, operating hours: 21,000 h, Screw compressor, Kaeser, Aircenter SX 6, compact all-in-one solution – used: Price ex works: €5,950.00 (net)! Manufacturer: Kaeser Type: Aircenter SX 6 Year of manufacture: 2008 Serial number: 1008 Rated power: 4.0 kW Motor speed: 2,910 rpm Max. operating pressure: 8.0 bar Ambient temperature: 3°C / 45°C Compressed air tank: 200 L Sound pressure level: Total weight: approx. 290 kg Dimensions (W x D x H): Width (mm): 590 Depth (mm): 1090 Height (mm): 1560 Nwjdpfxszbyc Hj Ad Ssh Options: K1 (refrigerant dryer) / T2 (voltage supply/transformer) Operating hours: approx. 20,210 h (as of April 21, 2026) Condition: good Available: from approx. August 2026 Location: Leipzig

Condition: good (used), Year of construction: 2013, operating hours: 48,000 h, Screw compressor, Kaeser, Aircenter SX 4, compact all-in-one solution – used: Price ex works: €4,500.00 (net)! Manufacturer: Kaeser Type: Aircenter SX 4 Year of manufacture: 2013 Rated power: 3.0 kW Motor speed: 2,910 rpm Max. operating overpressure: 8.0 bar Ambient temperature: 3°C / 45°C Compressed air tank: 200 liters Sound pressure level: 60–61 dB(A) Total weight: approx. 285 kg Dimensions (W x D x H): 590 x 1090 x 1560 mm Options: K1 (refrigerant dryer) / T2 (voltage supply/transformer) Nedozbyctspfx Ad Sowh Operating hours: approx. 46,997 h (as of April 21, 2026) Condition: good Available: from approx. August 2026 Location: Leipzig

Condition: excellent (used), functionality: fully functional, machine/vehicle number: P21120V02510, Year of construction: 2019, operating hours: 550 h, load capacity: 1,400 kg, lifting height: 7,200 mm, fuel type: electric, mast type: triplex, battery capacity: 620 Ah, battery voltage: 48 V, Equipment: cabin, sideshift, Linde R14-01 Triplex Reach Truck Top Condition 2019/550h For sale is a very well-maintained Linde R14-01 reach truck from 2019, with only 550 operating hours. The machine comes from a well-kept industrial fleet and is in excellent technical and visual condition. Technical specifications: • Manufacturer: Linde Material Handling • Model: R14-01 (R14 1120) • Year of manufacture: 2019 • Serial number: P21120V02510 • Load capacity: 1,400 kg at 600 mm load center • Mast type: Triplex 1501 • Lift height: 7,200 mm • Free lift: approx. 1,500 mm • Closed mast height: approx. 3,100 mm • Battery voltage: 48 V • Battery capacity: 560 / 620 Ah (4 PzS) including charger with stand • Drive power: 6.5 kW • Unladen weight (incl. battery): approx. 2,460 kg • Battery weight: approx. 590 kg • Operating hours: 550 h Equipment & Condition: • Triplex mast with free lift (excellent visibility and high lifting performance) • Sideshift • Fully functional and ready for immediate use Nwedpfsxub Rwex Ad Ssh • Battery in very good condition, with reliable charging performance • CE certification present • Immediately available • Transport possible upon request • Location: Viewing, collection, or handover is possible in Bavaria, 94469 Deggendorf area, until end of March 26 Price indication: Negotiable price – realistic offers are welcome.

Condition: used, mileage: 132,200 km, power: 77 kW (104.69 HP), first registration: 09/2018, fuel type: diesel, overall weight: 2,600 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,972 mm, total width: 2,032 mm, total height: 1,964 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1010. TA JM776 ----LOCATION: 04425 Taucha, Leipziger Str. 102 Tel. for inquiries: Mr. Ralph Bergel: By email: ----EQUIPMENT * Audio system 12 * Visibility package 1 * Seat package 4 + partition wall with window * Manual air conditioning * Transmission: 6-speed manual gearbox * ABS with EBD (Electronic Brakeforce Distribution) * Driver’s airbag * On-board computer * Flat roof * Headliner in driver’s cab * Double-wing rear door/180° (without window) * Tachometer * Electronic safety and stability system Nwsdpfx Adjumgcvo Sjh * Front electric windows * Cargo area lighting * Particulate filter: diesel particulate filter * Low beam headlights * Sliding door: sliding door, right * Side protection moldings * Power steering * Emergency brake assist * Seat belts * Air recirculation switch * Lashing eyes * Immobilizer * Heat-insulating, lightly tinted glazing * Central locking with remote control ...and much more. ----Vehicle is in unprepared/as-is condition! Delivery nationwide available at extra cost. Errors and prior sale excepted. We are happy to take your vehicle in part exchange. Financing/Leasing also possible without down payment! Do you have any questions? We are happy to advise you!

Condition: used, mileage: 1,001 km, power: 59 kW (80.22 HP), first registration: 01/1955, fuel type: diesel, empty load weight: 3,580 kg, maximum load weight: 3,500 kg, overall weight: 7,080 kg, tire size: 8.25-20, axle configuration: 4x2, wheelbase: 3,250 mm, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, loading space length: 3,400 mm, loading space width: 2,150 mm, loading space height: 550 mm, Year of construction: 1955, Equipment: cabin, trailer coupling, Vehicle location: Bovenden, Kz. Haus, switch 5, leaf suspension, AHK air-light-hydr. Wheelbase: 3250 mm Body: Truck vintage - 3-sided tipper swirl chamber diesel engine type EM4-20, 4-cylinder ( in-line ), 6024cm³, water-cooled, unsynchronized 5-speed gearbox, top speed: 60km/h, The successor model of the H3 was the H3A truck. It was presented to the public at the Leipzig Spring Fair in 1949 and built from mid-1950 to 1956 at the VEB Kraftfahrzeugwerk HORCH in Zwickau, initially as a platform truck. The H3A was a completely new development in its design as a long-hood truck with a diesel engine. The development of the diesel engine goes back to a VOMAG development for the Leipzig Spring Fair, the H3A appeared as a tractor unit with tank semi-trailer, other variants such as three-way tipper, livestock transporter, road tractor, tanker and with special bodies for the post office and DRK, as well as a furniture box. Around 180 H3B front-wheel-drive buses were produced at the LOWA plant in Bautzen on the basis of the H3A chassis. The main area of use was mainly in the civilian sector, but the H3A was also used by the Volkspolizei, or the barracked Volkspolizei, later NVA, Ex Dörr Spedition, errors excepted! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Njdpfx Adevhg R Te Sjwh - .

Condition: used, mileage: 1,000 km, power: 59 kW (80.22 HP), first registration: 01/1955, fuel type: diesel, empty load weight: 3,580 kg, maximum load weight: 3,500 kg, overall weight: 7,080 kg, tire size: 8.25-20, axle configuration: 4x2, wheelbase: 3,250 mm, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, number of seats: 2, loading space length: 3,400 mm, loading space width: 2,150 mm, loading space height: 550 mm, Year of construction: 1955, Equipment: cabin, trailer coupling, Vehicle location: Bovenden, Kz. house, switch 5, leaf suspension, AHK air-light-hydr. Wheelbase: 3250 mm Body: Truck vintage - 3-sided tipper body, swirl chamber diesel engine type EM4-20, 4-cylinder ( in-line ), 6024cm³, water-cooled, unsynchronized 5-speed gearbox, top speed: 60km/h, The successor model of the H3 was the H3A truck. It was presented to the public at the Leipzig Spring Fair in 1949 and built from mid-1950 to 1956 at the VEB Kraftfahrzeugwerk HORCH in Zwickau, initially as a platform truck. The H3A was a completely new development in its design as a long-hood truck with a diesel engine. The development of the diesel engine goes back to a VOMAG development for the Leipzig Spring Fair, the H3A appeared as a tractor unit with tank semi-trailer, other variants such as three-way tipper, livestock transporter, road tractor, tanker and with special bodies for the post office and DRK, as well as a furniture van. Around 180 H3B front-wheel-drive buses were produced at the LOWA plant in Bautzen on the basis of the H3A chassis. The main area of use was mainly in the civilian sector, but the H3A was also used by the Volkspolizei, or the barracked Volkspolizei, later NVA, Ex Dörr Spedition, errors excepted! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Nwjdpfevhg Hnjx Ad Soh

Condition: used, Year of construction: 2023, operating hours: 15 h, ATTENTION: Sunward machines are being offered that are not genuine. These are replicas under different names, advertised as Sunward successors or new models. Please verify whether the dealer is officially listed and whether the machine on offer has an official Sunward nameplate. Anything else is a replica not associated with Sunward. We are the official Sunward dealer responsible for the following regions: Berlin, the state of Brandenburg, and Eastern Saxony. Sunward SWE08B Year: 2023 Nsdsyq A N Uepfx Ad Sewh Approx. 15 hours – demonstration machine Operating weight: 980 kg Adjustable undercarriage: 750 mm to 1000 mm LED work lights 2 travel speeds Includes MS01, 25 cm and 60 cm digging buckets Net price: €13,900.00 Inspection possible at any time by appointment over the phone. All information provided without guarantee. We accept trade-ins of your used machine. We are Sunward dealer for the following regions: District of Wittenberg, District of Nordsachsen, District of Leipzig, City of Leipzig, District of Elbe-Elster, District of Oberspreewald-Lausitz, City of Cottbus, District of Spree-Neiße, District of Oberhavel, District of Barnim, District of Märkisch-Oderland, City District Frankfurt (Oder), District of Oder-Spree, District of Dahme-Spreewald, District of Teltow-Fläming, District of Potsdam-Mittelmark, City of Potsdam, City of Brandenburg, District of Havelland, City of Berlin.

Condition: used, Year of construction: 2025, operating hours: 53 h, SUNWARD SWE20F Nwedpfx Aoyq A Scod Sjh Year of manufacture: 2025 Approx. 53 operating hours (may increase due to demonstrations) Operating weight: 1.94 t Engine: Yanmar 3-cylinder diesel engine 3TNE88 (Japan) Power: 13.4 kW / 2200 rpm Telescopic undercarriage, width adjustable from 99 to 132 cm Foldable dozer blade 2 travel speeds Articulated boom (allows work directly at walls and hedges) Long dipper stick, digging depth 238 cm Load holding valve Pump: Kayaba (Japan) 2 proportional joysticks LED work lights Radio with SD/USB 2x auxiliary hydraulic circuits (for grab/hammer/shear) 1x quick coupler hydraulic lines Genuine counterweight – unlike replica models, which only have sheet metal covers in the rear that cause instability 4 years remaining warranty according to manufacturer’s guidelines Includes MS01 30 cm and 50 cm digging buckets 1 m fixed ditch cleaning bucket Optional: 1 m hydraulic ditch cleaning bucket for an extra €500 net. All information subject to change/errors. Take advantage of this unique opportunity to acquire a true professional machine at an unbeatable price. Sunward is among the top 20 excavator manufacturers worldwide. Viewing possible at any time by appointment (please call to arrange). We accept trade-ins of your used machine. We are the official Sunward dealer for the following regions: Wittenberg district, Nordsachsen district, Leipzig district, Leipzig city, Elbe-Elster district, Oberspreewald-Lausitz district, Cottbus city, Spree-Neiße district, Oberhavel district, Barnim district, Märkisch-Oderland district, Frankfurt Oder city, Oder-Spree district, Dahme-Spreewald district, Teltow-Fläming district, Potsdam-Mittelmark district, Potsdam city, Brandenburg city, Havelland district, Berlin city.

Condition: used, Technical details: sheet width: 250 mm plate thickness: 2 mm number of rolls: 11 straightening feed: 5...30 m/min infeed height: 1250 mm total power requirement: 4,0 kW weight of the machine ca.: 620 kg dimensions of machine: 1,15x1,02x1,5 mm dimensions electric cabinet LxWxH: 0,66x0,53x0,32 m Band Leveling Machine with feed Nodeu Ic Ewspfx Ad Sewh equipment: - sideways band guidance rolls model: - band intake height horizontal:1250mm - tiltable: positiv 30°; negativ 15° *

Condition: used, Year of construction: 1996, Technical details: x-travel: 762 mm y-travel: 510 mm z-travel: 560 mm control: Heidenhain TNC 415 OR 360 tool changer with: 21 place table clamping surface:: 865 x 510 mm table load: 455 kg tool taper: SK40 spindle revolutions per minute : 60 - 8000 U/min feed:: X/Y/Z; 15 000 mm/min Nwodsu Idmvopfx Ad Seh rapid traverse : X/Y/Z: 24 m/min compressed air: Bedarf: 5,5 bar Total power requirement: 30 kVA motor capacity: Spindelmotor: 11,0 kW max. torque on the spindle: konstant: von 60 - 750 KN Weight approx.: 4,3 t dimension machine xH: 2,6 x 2,8 x 2,6 m dimension coolant device: L: 2,7 x B: 0,8 x H: 0,8 m Machining center with automatic tool changer IKZ and coolant supply through nozzles Chip and coolant tray Lubrication system through ball screws Manual control unit Heidenhain TNC 415 - dialog or according to ISO (machining cycles: deep hole drilling; tapping; slot milling; rectangular pocket and circular pocket milling; SL cycles), up to 100 programs in file management Machine can be visited with pleasure under power. i.D. *

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. Nedou Nzwuspfx Ad Sowh A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Condition: used, Year of construction: 1995, Technical details: Nwjdpfxjvc Axco Ad Seh Table dimensions: 920 x 620 mm voltage: 220 / 50 V / Hz total power requirement: 0,77 kW weight of the machine ca.: 0,11 t dimensions L x W x H: ca.0,92 x 0,62 x 0,80 m Strapping Machine Semi-automatic machine for plastic strapping (approx. Ø 500 x 17mm) Strap holder located in the base cabinet table surface folded with 1,5mm chrome plate with stop LxWxH 345 x 80 x 20mm, adjustment approx. 32mm The adjustment of the tightening is done by display on linear scale. The packaging machine is mobile and easy to move = 4 castors, swiveling and 2 castors are braked. *

Condition: used, Year of construction: 1996, Technical details: length: 4000 mm width: 800 mm height over floor: 400 mm Nwodpfxou Nv Syo Ad Seh Payload: 3,0 t dimensions L x W x H: 4,1 x 0,8 x 0,41 m weight: 0,153 t Several of these "long material trailers" are for sale in Leipzig. The trailers can be coupled together. The drawbar/trolley jack is charged separately, if required. Single axle operation with rigid axle. Solid rubber tires, track spacing = 590mm Sale individually but also in a package from 5 pieces possible. Price on request. i.D. *

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step Njdpfxjv A Sqhe Ad Sswh total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Year of construction: 2021, condition: used, Technical details: pressure: 5 t distance between columns: - mm dayligth: 60 mm rated capacity: 8 kVA table height adjustment: 60 mm compressed air: 6 bar connection voltage: 400 V electrics - voltage/frequency: 400/50 V/Hz total power requirement: 4 kW machine weight ab.: 610 kg SERVO-MECHANICAL SPINDLE PRESS Machine is programmable! MACHINE DESCRIPTION (2 machines available) MACHINE: Electrically driven press with a pressing force of 50,000 N The machine is designed for pressing bearings and rubber seals. It consists of a welded L-shaped frame. Njdoyzzh Espfx Ad Sjwh A movable press table is mounted on the horizontal arm, which can be manually adjusted along linear guides. In the front position, the table can be manually locked using a spring-loaded pin. In the working position (under the press head), the table is automatically locked by a pneumatic cylinder. The press head can only be lowered using two-hand operation when the table is in this position. The control panel includes: ·Two-hand control switches ·Emergency stop switch ·Table lowering button ·Force selection switches (1, 2) The pressing force can be adjusted using potentiometers in the control cabinet. Two force levels and the corresponding pressing speed can be set there. The press head moves along the vertical arm of the press on linear guides. It is driven by a lead screw, powered by an electric motor with gearbox via pulleys and a timing belt. The entire machine is mounted on a table made of aluminum profiles. *

Condition: used, Year of construction: 2021, Technical details: feed pressure: 8 bar liter capacity: 620 l total power requirement: 4 kW sound level: 63 dB(A) revolutions per minute of the motor:: 920 Number of cylinders: 2 electrics - voltage/frequency: 400/50 V/Hz Pressure max.: 14,5 bar Nwjdpfxsxrdw Io Ad Ssh Number of working hours: 2195 h machine weight approx.: 194 kg dimensions L x W x H: 1,24 x 0,85 x 1,20 m Professional, soundproofed compressor with the lowest noise level in its class, designed to eliminate noise problems in working environments. The powerful 5.5 hp pump unit guarantees maximum efficiency and reliability. It is also equipped with an additional intake silencer, a belt tensioning device that regulates belt tension and facilitates replacement, and a forced ventilation fan for better cooling. The control panel with star-delta start control is positioned for easy reading and operation. The opening front door allows for easy maintenance. *

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm * Nodsu Ibuwepfx Ad Sowh