Used Kuhlmeyer for sale (7)

Condition: good (used), Year of construction: 2010, functionality: fully functional, with sliding table featuring workpiece handling device 400 V, grinding belt speed: v=4 - 25 m/s Drive of the grinding belt via frequency-controlled three-phase motor with P = 4.0 kW Itjdpjxgpbusfx Afisn Frequency inverter with brake chopper for deceleration in max. 10 s Max. workpiece weight with area load: 100 kg Motorized table height adjustment on roller guides up to max. 480 mm Drive by gear motor with P = 0.55 kW, adjustment speed v = 0.9 m/min Table size 3000x1000 mm, sanding belt 100x9000 mm Extraction nozzle with D=200 mm on the left machine column Required extraction capacity approx. 3400 m³/h Standard machine color: RAL 5015 (sky blue), RAL 7044 (silk grey); Control cabinets and terminal boxes: RAL 7032 (pebble grey)

Year of construction: 2001, condition: excellent (used), Technical data / Standard dimension: Working heights between 650 to 1800 mm per grinding unit Oscillation angle 0° to 90° Isdpoign Idjfx Afiotn L/R – adjustment by using 2 grinding units up to 2200 mm Controls Siemens Motor power 3,0 kW Grinding belt speed up to 25 m/s Pneumatical grinding belt tensioning

Year of construction: 1993, condition: good (used), machine/vehicle number: 931216, Technical data: - Edge grinding machine for edge processing on - welded boxes , cabinets , safes etc. - control SIEMENS for clocking + oscillation Ijdeggbmaopfx Afiotn - max. sanding height approx. 1200 mm - sanding belt dimension 100 x 2240 mm - sanding belt speed 12 + 24 m/s - sanding unit swivelling - 2 magnetic clamping plates - Mot. sanding dust extraction - Pneumatic connection 6 bar - drive 400 V - space requirement approx. W 2500 x H 2000 x D 2000 mm - Weight approx. 1500 kg

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23 03 28 / 1, TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing - equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit - free space within the working area by guiding the belts over an upper installed deflection unit - open and close of upper grinding belt hoods by pneumatic cylinder - accident protection by movable grinding belt cover - selectable for front and rear belt - preselection by 2 potentiometers in the control panel and frequency inverter in high-line version - with limit switch/operation by movable grinding belt cover - tension of each grinding belt by pneumatic belt tension device - the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw - frequency converter with brake chopper unit for braking in max. 10 s Itodpfx Afot Hvkvjion - grinding belt speed v = 4 - 25 m/s - emergency-off release line in the working area - with a sliding table of aluminum-pipe installed between the machine stands - table movement back and forward by means of 4 soft prism rolls - max. workpiece weight 100 kg - motorized table height adjustment by spindles and roller guiding's until max. 780 mm - spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min - machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground) - with a temporary traverse, to remove after adjusting and bolting to the ground - pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls - dust extraction tube on the left hand machine stand with D = 200 mm - necessary extraction power = approx. 3400 m3/h - working area to be illuminated by means of 2 LED lights, adjustable in 3 steps ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm Filter included. Additional info in pdf attached.

Condition: used, Year of construction: 1994, functionality: fully functional, total length: 6,800 mm, total width: 2,400 mm, total height: 2,000 mm, table length: 2,200 mm, Universal grinding machine type USM with milling and sanding units UNIVERSAL MILLING AND SANDING MACHINE TYPE UFSM Suitable for machining straight and profiled edges on panel-shaped workpieces, the ends of strips and posts, stair treads, etc. Itedpfxjwf U Awo Afion Design: 1. BASE MACHINE, length: approx. 6,800 mm, machine table length: 2,200 mm for a maximum workpiece length of 2,000 mm, drive for automatic table reciprocating motion, feed rate in the range of 4 - 40 m/min. Continuously adjustable 2. Workpiece clamping device TR, 0-80 mm 3. Profile milling unit, working from below, P = 3.7 kW and n = 6000 rpm 4. Profile milling unit, scanning from above, P = 1.5 kW and n = 6000 rpm 5. Sanding unit S 2000 K, for grinding straight edges, P = 2.4/3.0 kW 6. 2 x Sanding units S 2000 x 60 DF, for grinding the lower and upper radius, P = 0.6/0.9 kW 7. Digital electronic, travel-dependent tool control for precise tool insertion and removal, independent of the feed rate

Condition: used, - engine (hp): 1/1.9 - engine (rpm): 710/1420 - Motor (V): 380 Ijdpfx Afem R Ilsietn - Motor (A): 3.7/3.8

Condition: used, - Sanding belt: oscillating - Pivotable - Driven roller: in table - Fields of application: Mouldings, round arches etc. Isdpfx Aem Sf Defistn