Used Galvanotechnik Leipzig for sale (613)

Condition: ready for operation (used), Year of construction: 1929, functionality: fully functional, machine/vehicle number: Nr. 17575, overall weight: 600 kg, total length: 2,150 mm, total width: 1,100 mm, total height: 2,000 mm, Lithographic press, also known as scraper press, for manual printing from lithographic stones. Used by artists/lithographers, in schools, art schools, and museums. The machine was most recently used in the atelier of the Gutenberg Museum in Freiburg for demonstrations and workshops. Stone format up to 70 x 100 cm. Also very interesting as a display piece in entrance halls, restaurants, etc. Dcjdpfxjx A H I De Ab Ter

Condition: new, Year of construction: 2024, NEW ONE WAY CONTAINER Year of manufacture 2024 / 2025 with lock box with forklift pockets Dodog S Adljpfx Ab Tocr

Condition: used, Technical details: max. dia. of grinding wheel: 175 mm revolution per minute: 2750 m/sec. boring diameter: 20 mm Dcedpfju Ngtbjx Ab Ter number of stations: 2 Stück total power requirement: 0,4 kW weight: 15,4 kg space requirements of the machine approx.: L:380xB:252xH:270 mm technical data: - 4 holes Dm= 10mm are available at the base for mounting on the worktable. - VEM CS 175 motor with 220/380V-50Hz; (1,9&1,1A) Protection class P33, - connector plug CEE 16 Equipment: - with grinding surface and grinding protection on both sides On sale as is!, without test run! *

Year of construction: 2000, condition: like new (used), PADELTTHERM through-hull glow ovens Type: ROH 50 X 15 X 150 - E Circuit diagram no.: 6 - 16 -4. Bp Order no.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Dcodscn Tr Iepfx Ab Tjr Rated power 32 KW Protection class IP 54 Rated current 58 Amp. max. temperature 1050° C Weight 2250 Kg very little used in a UNI

Condition: used, Kirchner Leipzig triple-spindle combined table saw, mortising and milling machine. Without milling arbor. engine: 3 kW Dsdewzbcvopfx Ab Tocr

Condition: good (used), Year of construction: 1971, functionality: fully functional, machine/vehicle number: 12.02-37-31, grinding wheel width: 250 mm, grinding wheel diameter: 500 mm, grinding diameter: 125 mm, grinding length: 200 mm, type of input current: three-phase, overall weight: 5,000 kg, workpiece diameter (max.): 125 mm, nominal power: 28 kW (38.07 HP), The machine was used exclusively for grinding piston rods with a diameter of 10 mm. Dsdpfx Abow E D Euo Tjcr

Condition: reconditioned (used), machine/vehicle number: BM4933, BM4933 Djdpfxjh U Az Do Ab Tecr 61 cm-width needle perforator / creasing machine stand model with front & back table foot pedal perforating comb creasing comb back table stop with ruler - machine has been refurbished - can be tested

Condition: used, Year of construction: 1977, Technical details: grinding wheel diameter: 200 mm revolution per minute: 3000 U/min with handrail: verschiebbar 30mm current type: 220V / 380V Dcedpou Nguxofx Ab Tsr total power requirement: 900 Watt weight: 149 kg dimensions L x W x H: 0,4 x 0,5 x 1,2 m Double grinding block Main switch - On/off switch Connection for dust extraction Currently attached grinding wheels: Ø 140 x 25 and Ø 150 x 25 mm *

Condition: used, Technical details: grinding wheel diameter: 200 mm voltage: 220 380 V / Hz revolution per minute: 3000 U/min total power requirement: 900 Watt Dcodpou Ngu Sefx Ab Tsr weight: 22 kg dimensions L x W x H: 0,23 x 0,46 x 0,25 m Double sanding block; table-top unit with sanding supports left/right, horizontally adjustable 30mm max. sanding discs Ø 200mm max. grinding wheel thickness 32mm currently clamped sanding discs on the sanding block: left = Ø 190mm x 30mm type H50 and right = Ø 180mm x 32mm type M20 *

Condition: used, Technical details: grinding wheel diameter: 200 mm revolution per minute: 2750 U/min total power requirement: 700 Watt current: 220 / 380 A weight: 70 kg dimensions L x W x H: 0,4 x 0,46 x 1,22 m Double sanding block, table-top unit mounted on stand Dodpfou Ngvijx Ab Tocr with handrail on both sides, adjustable/swiveling Sanding guard on both sides Use max. sanding discs Ø 200mm max. sanding disc thickness 30mm sanding disc currently clamped on sanding block: left=Ø 160 x 30mm and right=Ø 160 x 22.5mm Connections for dust extraction on both sides Ø 35mm *

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 200 mm, workpiece height (max.): 130 mm, TECHNICAL DETAILS Workpiece Dimensions Max. workpiece length: 3,200 mm Min. workpiece length: 200 mm Max. workpiece thickness: 130 mm Min. workpiece thickness: 30 mm Max. workpiece width: 200 mm Min. workpiece width: 30 mm Tenoning Carriage Tenon length at max. tenoning diameter: 320 mm Tenoning carriage speed: 0 - 40 m/min Profiling speed: 4 - 20 m/min Table height for profiling: 850 mm Feed roller diameter: 100 mm Distance between feed rollers: 150 mm Crosscut Saw Motor power: 4 kW Speed: 3,000 rpm Spindle diameter: 40 mm Max. tool diameter: 400 mm Milling Unit for Tenoning High-performance spindle with upper bearing: Diameter 50 mm, length 620 mm Motor power: 7.5 kW Speed: 3,500 rpm Max. tool diameter: 320 mm Axis travel below work table: 575 mm Milling Unit for Profiling Dcodpfexx Un Rex Ab Ter Spindle: 50 x 320 mm Motor power: 7.5 kW Speed: 6,000 rpm Min./max. tool diameter: 130 - 250 mm Spindle Speed: 1,000 - 12,000 rpm Max. motor power: 11 kW Max. tool diameter: 230 mm Tool positions: 24 Max. weight per tool: 10 kg EQUIPMENT Automatic chip protection Jolly Automatic brake RAPID 24 automatic tool changer Fast vertical adjustment via brushless motors Water cooling for electrospindle Vector rotary axis for 360° electrospindle rotation Note: Further technical details can be found in the attached document!

Condition: good (used), Emil Kahle Letterpress Machine Platen Dcsdpfxovac S Re Ab Tor Manufactured in Germany by Emil Kahle Maschinenfabrik, Leipzig Reudnitz A brilliant-looking exhibit to place in a company lobby. Manually added piston. Foot pedal controlled. Frame with mounted form included. Frame size approx. 365×255 mm.

Condition: used, Year of construction: 1992, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,380 mm, cutting height (max.): 125 mm, saw blade diameter: 400 mm, overall weight: 1,150 kg, slide length: 3,200 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 5,000 rpm, pivoting range: 45 °, Equipment: motor brake, scorer, Panel Saw Robland Z 320 Year of manufacture: approx. 1992 - fully functional - with scorer - Saw blade 400x30 - Cutting height 125mm - Cutting height at 45°: 100mm - Scorer 100x20 Dsdpfox Diu Nex Ab Tocr - Speed 3000/4000/5000 rpm - Sliding table 3200mm - Cutting width right 1380mm The machine can be inspected and tested at the Leipzig location. Collection with loading possibility is possible on 15 or 16 December 2025.

Condition: excellent (used), Year of construction: 2023, functionality: limited functionality, Manufacturer: Breyer Extrusion Item: Die, 3 layer die 2300mm 3-layer flat sheet die, 2,300 mm width (die opening) Deckling device for one die (max. 500 mm) Feed-block / distribution block Year of manufacture: 2023 Original purchase price at the time: €365,500 Total price at the time: €444,200 Key technical data of the die: - Total throughput: approx. 700 kg/h - Designed for HDPE material - Gross discharge width: 2,300 mm, adjustable via deckling - Lip opening: 16 – max. 26 mm - Heating: Electric via heating cartridges 400V / 50Hz - Die heating capacity: 137 kW - Co-extrusion adapter heating capacity: 7.5 kW Comprising: - Die (main die body) 3 channels - Co-extrusion adapter - Die body - Die lip body - Attachments / screws - Attachments for deckling and co-ex adapter parts - Attachments for adjustment mechanisms (Note: Photos are from 2023) The die now shows signs of use and is stored disassembled. The heating elements are included but not installed. The die is located in 78224 Singen (Hohentwiel) at the manufacturer’s premises. An inspection on site is possible by prior appointment. Further photos available on request. You are welcome to submit a price proposal. Reasonable offers will be considered. Please provide complete contact details with your enquiry! Delivery may be available for a fee. You are also welcome to inspect the item on site. Please call to arrange an appointment. A quick tip: Become a “FOLLOWER” of ours here on Kleinanzeigen to stay up to date with our latest listings and offers. This item comes from insolvency proceedings and thus shows signs of use. Maintenance and professional cleaning are the responsibility of the buyer. Sale is without any warranty. Liability, reduction or rescission is expressly excluded. An inspection prior to purchase is recommended, as it is sold as seen. All information is provided without guarantee. Errors and changes excepted. Dodox A D Emjpfx Ab Tocr The item is sold as inspected on site, in used condition, with retention of title, and under exclusion of liability for visible and hidden defects, especially technical quality, performance, or usability issues. Due to time constraints, we will only respond to serious enquiries and price offers! This is an advertisement for informational purposes only. Inspection strictly by appointment only! Best regards, Leipziger Sicherstellungs- und Verwertungs GmbH R. Raum, Tel. 0152 31381635

Condition: used, Year of construction: 2004, Technical details: balancing body max.: 12500 kg balancing body diameter w/o machining unit: 1500 mm bed length: 3000 mm swing diameter: 2400 über Maschinenbett mm rotor-shaft: Ø 1500 über Bandantreb voltage: 400 / 50 V/Hz drive power: 22 kw connected load: 25 kVA / 20 kW compressed air: 6 bar Weight approx.: ca. 5,5 t Dsdpfeu Iczrex Ab Tocr dimension machine xH: 3,3 x 1,5 x 2,0 m dimensions electric cabinet: 650 x 610 x 2150 mm Horizontal balancing machine, functional see video, dismantled, ready for loading ex Leipzig. The balancing machine is used to measure and balance the static or dynamic unbalance of rotors. Drive block/balancing speed: 5-speed and reverse gear (manual gearbox) max. 80 rpm; 160 rpm; 290 rpm; 470 rpm; 630 rpm. incl. PCX measuring electronics Measuring method force-measuring Measuring range of the electronics Speed 60 to 30,000 rpm. Bearing journal Ø 40 - 178mm / 140 - 445mm 2 base bodies (cast steel body), storage length between the bearing pedestals up to approx. 3000mm, adjustment with hand ratchet via toothed rack, with extension 1500mm 2 bearing pedestals/swing bearing blocks: Center height 1200mm measured in bed; 2x rollers Ø 195 x 56mm; 2x rollers; center distance 205mm; adjustment travel 350mm vertical *

Condition: good (used), Year of construction: 2016, operating hours: 14,600 h, functionality: fully functional, machine/vehicle number: 1087-1210063, Printing solution: Xeikon QA-P toner Working resolution: Digital frontend Xeikon X-800 with toner optimization module Finishing solution: Unwinder, WFM, high-capacity stacker, Kern end processing solution Year of manufacture: 2016 If interested, we are happy to provide further information or video material. Disassembly was carried out by the Xeikon representative. Dcedpfx Absx Ap Rho Ter

Condition: excellent (used), functionality: fully functional, machine/vehicle number: F103T71451057SA, Model: Portioning System, Filling Machine System for portioning and forming using low-pressure process Exclusion of warranty and guarantee; purchased as seen Dcjdpfx Abevk Uyuo Tsr Type: C-Line CLB Linear (compatible with F-Line F103) Year of construction: 2017 Mobile/Mobile unit Power output: 9.15 kW Voltage: 400V Net sale price reduced from €15,000.00 to €9,990.00 (original net purchase price €29,000.00) Condition: The device is in very good condition and fully functional! Invoice with itemized VAT Collection: from our warehouse Shipping is possible upon request at buyer's expense

Condition: good (used), Brehmer Polygraph 39 3/4-2 Book Sewing Machine Manufactured by Polygraph Leipzig, Germany. The machine is in perfect condition, like new. Unique condition. Fully original, in original paint. Dcodpsvkt Hmjfx Ab Tsr The set includes a set of additional elements, tools, documentation. Weight 470kg.

Condition: used, Year of construction: 1990, functionality: fully functional, planing width: 520 mm, total height: 1,200 mm, total width: 1,400 mm, overall weight: 600 kg, table length: 3,000 mm, Equipment: motor brake, SCM F 520 heavy-duty jointer Planing width: 520 mm Table length: 3,000 mm Hydraulic height adjustment of infeed table via foot pedal 4-knife Tersa cutterhead Bevel and concave joint adjustment 4 kW Electric motor brake Machine is fully OPERATIONAL and in GOOD CONDITION The machine can be inspected and tested at any time at the site in Leipzig Dcjdpfjxz Tplox Ab Tor

Condition: excellent (used), functionality: fully functional, Model: no name Material: stainless steel Dedpfxevk Uvce Ab Tocr Net selling price reduced from €3,000.00 to €1,999.00 (net acquisition price €5,500.00) Condition: The unit is in very good condition and fully functional! Invoice with VAT shown separately Collection: from our warehouse Shipping available on request at buyer's expense

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: E60301/2, Model: K+G Wetter M200 440 Paddle Mixer The mixing machine is equipped with a screw conveyor, which allows the product to be discharged easily and in a controlled manner. The discharge height is specifically designed for standard trolley height. Two mixing directions. The machine is constructed entirely from stainless steel. Year of manufacture: 2003 Capacity: 200 l (140 kg product) Number of mixing directions: 2 Mixing arm speeds: 17 rpm - 34 rpm Screw speeds: 34 rpm - 68 rpm Dimensions (W x H x D): 700 x 1750 x 1500 mm Weight: 690 kg Power: 2.4 kW Voltage: 400 V (3+N, 50 Hz) Net sale price reduced from €8,500.00 to €5,500.00 (original purchase price net €14,870.00) Condition: The machine is in very good condition and fully operational! Dcsdpfsvk Utuox Ab Tjr Invoice with shown VAT Collection: from our warehouse Shipping available on request at buyer’s expense

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FEVRIER 1995, EC 371, Model: Kaufler EC 371 Year of manufacture: February 1995 Load capacity: 300 kg Dcodovk Uv Aepfx Ab Tjr Power: 380 V Net sale price reduced from €3,000.00 to €1,999.00 (net purchase price €5,000.00) Condition: The device is in very good condition and fully operational! Exclusion of warranty and guarantee; sold as seen Invoice with VAT shown separately Collection: from our warehouse Shipping available on request at buyer's expense

Condition: excellent (used), functionality: fully functional, Model: Portioning Conveyor - Forming Machine Add-on for Cevapcici Line Height-adjustable digitally controlled conveyor belt (300 mm wide) including paper dispenser for rolls up to max. 600 m Dedpexa Al Hjfx Ab Tscr belt speed adjustable via filler control (TC) PBSE: includes cutting unit, only in combination with CLB air requirement: 6 bar, approx. 70 Nl/min No warranty or guarantee; sold as seen Net selling price reduced from €9,900.00 to €6,500.00 (original net purchase price €18,012.00) Condition: Unit is in very good condition and fully functional! Invoice with indicated VAT Collection: from our warehouse Shipping on request at buyer’s expense

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Model: F-Line, F103 Year of manufacture: 2017 Dodpfxevk Uvvo Ab Tocr Power: 9.15 kW Filling capacity: up to approx. 3,000 kg/h Filling hopper: one-piece, approx. 120 liters Vacuum pump: 21 m3/h Portioning range: 5 - 100,000 g (5 - 999 g in 0.1 g increments) Portioning speed: max. 600 portions/min Electronic impulse control: for clipper machine Net sale price reduced from €19,500.00 to €12,990.00 (original net purchase price €45,000.00) Condition: The machine is in very good condition and fully functional! Exclusion of warranty and guarantee; purchased as seen Invoice with itemized VAT Collection: at our warehouse Shipping by freight carrier possible at buyer’s expense on request

Year of construction: 2020, condition: excellent (used), functionality: fully functional, machine/vehicle number: N0021422, Model: Taylor Contact Lift Grill Year of manufacture: 2020 Djdpjvk Urdofx Ab Tjcr Commissioned: 2021 Mobile Dimensions: 420x980x850/1070mm Power: 400V / 8.3kW Net sale price reduced from €7,479.00 to €5,900.00 per unit (original net purchase price €13,223.00) Condition: Machine is in very good condition and fully operational. Exclusion of warranty and liability; sold as seen Invoice with VAT shown Collection: from our warehouse Freight by forwarding agent on request at buyer's expense possible