Used Kirchner Leipzig Planer for sale (2,457)

Condition: used, Kirchner Leipzig triple-spindle combined table saw, mortising and milling machine. Without milling arbor. engine: 3 kW Lodpswzbcvofx Affota

Condition: used, Year of construction: 2020, functionality: fully functional, Technical Details: Manufacturer: • MEYER PLANTTEC • PLANER Systemtechnik Model / Designation: Weighing System Ricon 603 Ltodpsx Itr Njfx Affja Control Cabinet Type: 2005767 = P1 Power Supply: 400 VAC / 50 Hz Control Voltage: 24 VDC Maximum Fuse Capacity: 25 A Rated Current: 8 A Total Weight: 60 kg Serial Number: 2005767-1 Year of Manufacture: 2020 PST Drawing Number: 161-10-760-02 2. System Overview (Visible Components) 2.1 Structural Frame • Welded steel frame with grating work platform • Integrated drum support area • Mounted linear guide rails and table elements • Lower grating section for drainage or spill containment 2.2 Pump and Mixing Area Mounted on the left side: • Vertical, motor-driven pump assembly equipped with INVEOR motor controller • Pump inlet connected to a chemical container positioned on the system frame • Stainless steel piping connected to the valve block and dosing line 2.3 Valve and Drive Unit • Stainless steel valve block with flange connections • Pneumatic rotary actuator: AIR TORQUE Germany Type/Model: SC0050-AJZ Series: FGF-010-S-17 Pressure Range: max. 10 bar Torque Values: 29 Nm (min) / 60 Nm (max) Temperature Range: –40 °C to +180 °C Connections: 1/4" Certification: CE, ATEX (EX II 2 G Ex h IIC T6 Gb X / Ex h IIIC T85°C Db X) Year Code: 20138769

Condition: reconditioned (used), machine/vehicle number: BM4933, BM4933 Ltodpfxsh U Az Ds Affoa 61 cm-width needle perforator / creasing machine stand model with front & back table foot pedal perforating comb creasing comb back table stop with ruler - machine has been refurbished - can be tested

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Ljdpfx Aei Apuheffjta Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed

Condition: ready for operation (used), Year of construction: 1929, functionality: fully functional, machine/vehicle number: Nr. 17575, overall weight: 600 kg, total length: 2,150 mm, total width: 1,100 mm, total height: 2,000 mm, Lithographic press, also known as scraper press, for manual printing from lithographic stones. Used by artists/lithographers, in schools, art schools, and museums. The machine was most recently used in the atelier of the Gutenberg Museum in Freiburg for demonstrations and workshops. Stone format up to 70 x 100 cm. Also very interesting as a display piece in entrance halls, restaurants, etc. Ltodpfx Ajx A H I Dsffja

Condition: new, Year of construction: 2024, NEW ONE WAY CONTAINER Year of manufacture 2024 / 2025 with lock box Ltsdpfjg S Adlex Affja with forklift pockets

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes. Lsdpou Au I Tsfx Affjta

Year of construction: 2000, condition: like new (used), PADELTTHERM through-hull glow ovens Type: ROH 50 X 15 X 150 - E Circuit diagram no.: 6 - 16 -4. Bp Order no.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Rated power 32 KW Protection class IP 54 Rated current 58 Amp. max. temperature 1050° C Weight 2250 Kg very little used in a UNI Ledocn Tr Ijpfx Affsta

Condition: used, Capacity: 80 m/min Lodpfx Afjg S Dm Nefjta Planer feed table, tested. At speeds up to 80 m/min.

Condition: good (used), Year of construction: 1971, functionality: fully functional, machine/vehicle number: 12.02-37-31, grinding wheel width: 250 mm, grinding wheel diameter: 500 mm, grinding diameter: 125 mm, grinding length: 200 mm, type of input current: three-phase, overall weight: 5,000 kg, workpiece diameter (max.): 125 mm, nominal power: 28 kW (38.07 HP), The machine was used exclusively for grinding piston rods with a diameter of 10 mm. Ltsdpfx Afew E D Eusfja

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg Ljdpfxsl Dw Nxj Affota cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: ready for operation (used), Butler Planer With Flott linisher attachment Vast amount of planning tools 6000mm x 2440mm table 3000mm between columns 2440mm under the bridge (vertical) New electrics and motor Ltsdewwk Rbjpfx Affsa

Condition: ready for operation (used), X-beweging: 6000 mm Y-beweging: 1500 mm Lsdpfjx Nr E Rjx Affeta Z-beweging: 2000 mm - 2 hoofden - open kolom! - elektrisch gereviseerd in 2010 - Heidenhain digitale uitlezing - Leroy Somer elektra voor afvoer van tafel - frequentieregeling op alle assen - tafelafmetingen: 6000 x 1800 mm - voldoet aan de huidige (Franse) gezondheids- en veiligheidsvoorschriften - Belasting op de tafel: 18 ton Machine werd gebruikt in de gereedschapswerkplaats van een autofabrikant. Enkele plano freesmachine Korting op een geldbedrag Fresadoras zijn een soort pilaartjes van een kolom

Condition: good (used), Year of construction: 1984, SAC used jointer planer SAC FS 430 Ljdpfx Asx Nrvvjffeta - 430 mm planing width - 2.90 m table length - 120 mm cutterhead with 4-knife strip knives - 3 kW, 380 volt motor - Automatic motor brake - 8 mm depth of cut - Fence tiltable up to 45° - Swing-away Aigner auxiliary fence - Bridge-type knife guard (cutter cover) - Low-noise design with serrated steel table lips - Extraction port - Weight: approx. 650 kg Location: at customer site - immediately available - Subject to prior sale

Condition: excellent (used), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height, double-sided: 200 mm - Electrically adjustable table height (up/down) - Maximum planing height, four-sided: 100 mm Top section: - Driven infeed shaft, toothed - Kickback devices - Pressure unit - 2 driven shafts, toothed - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Outfeed driven shaft, smooth Bottom section: - Guide bar - Driven roller, toothed Ledpfx Afewtp U Rsfota - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth driven rollers Rear section: - 2 side spindles with pressure unit 1) Right vertical, 100 mm, 4 kW 2) Left vertical, 100 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable vertically and horizontally - Manual planing width adjustment - 6 feed rates: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Dimensions (L/W/H): 2500 x 1800 x 600 mm - Weight: approx. 3000 kg FEATURES - Perfect for log, flooring, and similar applications - Manufactured by German brand KUPFERMUHLE - 2 horizontal planing shafts + 2 vertical spindles - Used planer, in very good condition Net price: 56,900 PLN Net price: 13,550 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with exchange rate fluctuations)

Condition: used, functionality: fully functional, planing width: 520 mm, total length: 3,100 mm, total height: 1,500 mm, total width: 800 mm, overall weight: 900 kg, table length: 3,050 mm, planer shaft diameter: 120 mm, working width: 520 mm, number of planer blades: 4, – CE marking – machine as new TECHNICAL SPECIFICATIONS – max. planing width: 520 mm – cutterhead diameter: 120 mm – 4-knife cutterhead – TERSA knives – noise reduction comb at cutterhead – jointer shaft guard – table width: 51 cm – table length: 305 cm – hydraulic lifting by pedal – height counter – motor: 7.5 kW – tilting fence Ljdpfxew Iqa Ne Affeta – manual star-delta switch – extraction port connection: 120 mm – two adjustable tables – quiet operation – full factory cast iron body – original factory paint – dimensions (L/W/H): 310 x 70 x 150 cm – weight: 900 kg

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, Initial commissioning: 2005 Overhauled: 2022 Control system: SIEMENS SINUMERIK 840D PL Working area X-axis: 3,000 mm Y-axis: 2,500 mm Z-axis: 1,250 mm A-axis: +/- 100° C-axis: +/- 360° Hours Total machine hours: 110,000 h Total spindle hours: 60,000 h Current spindle hours: 1,900 h (new, February 2024) Clamping table Length x width: 3,000 x 2,500 mm T-slots: 18 H12 T-slot spacing: 250 mm Table load capacity: 5,000 kg/m² Installation: above floor Milling head VH6 Spindle power: 41 kW Spindle speed: max. 10,000 rpm Torque: approx. 200 Nm Lsdpfsx Npmrex Affota Tool holder: HSK 100A Axis clamping A & C: 3,000 Nm Drives linear axes Drive technology: linear motor Feed rate X/Y/Z-axis: 40–60 m/min Axis acceleration X/Y/Z: 3–5 m/s² Electrical specifications Voltage: 400 V Frequency: 50 Hz Dimensions & weight Machine space requirement: approx. 7,300 x 6,500 x 5,600 mm Total weight: 60 t Additional equipment - 1x chip conveyor, left - Video camera system for work area monitoring - 40 bar ICS coolant supply with belt filter system - 11 bar external coolant supply, face end - 30-position tool changer, expandable by 20 additional positions - Renishaw RMP60 / Renishaw touch probe - BLUM tool measurement and tool breakage control

Year of construction: 1999, condition: ready for operation (used), General Data Machine weight 3200kg This WEINIG Unimat 23 E was manufactured in 1999, designed for efficient wood planing. Ideal for woodworking professionals looking to enhance their production capabilities. Contact us for more information. Application Types Planing Ltodex Nkmyspfx Affsa

Condition: used, Year of construction: 1988, Planing width: 860 mm, clearance height: 200 mm, minimum clearance height: 3.0 mm, bottom motor: 18.5 kW, top motor: 7.0 / 10.0 kW Ltedevvkc Aepfx Affoa Storage location: Nattheim

Condition: excellent (used), Year of construction: 2006, heavy duty thickness planer Panhans 436 DH 400 with large table extension Planing width: 630 mm Planing height: 250 mm Electric height adjustment with tenth-millimeter tip switch – digital Tersa cutterhead Ltsdox Nrvcopfx Affoa Table guided on four points Main motor: 7.5 kW Feed speed: 7 + 14 m/min Rubber infeed and outfeed rollers, floating Segmented pressure beam made of solid aluminium, floating Location: ex customer site - immediately available -

Condition: excellent (used), Catalogue number 7667 TECHNICAL DATA - Working width: 630mm - Number of knives: 4 pcs - Max thickness of processed element: 250mm - From above: - Kickbacks - Serrated, driven infeed roller - Pressure bars - Planing cutterhead - Kickbacks - Smooth, driven outfeed roller - From below: - Adjustable rollers in lower table: 2 pcs - Main motor: 7.5kW - Electric table lifting - Lifting motor: 1.5kW - 3 feed speeds: 8/12.5/20m/min - Feed motor: 1.5kW - Extraction port diameter: 120mm Lodpfx Afjwt Agmofeta - Dimensions (L/W/H): 1150x1200x1700mm - Weight: 1100kg ADVANTAGES – Polish production – Electric table lifting – Thickness planer, used, in very good condition Net price: 21,900 PLN Net price: 5,200 EUR (according to 4.2 EUR exchange rate) (Prices may vary in case of significant rate fluctuation)

Condition: used, Year of construction: 1989, working width: 510 mm cutter head: Tersa number of blades: 4 surface table length: 2800 mm adjustment table: hydraulisch / Fußpedal Hollow and pointed joints adjustment: ja read out table hight: Scala read out Hollow and pointed joints: Scala surface fance adjustable: ja motor power: 5,5 kW machine length: 2800 mm machine width: 1000mm Ledpfex I Ah Hex Affota weight: 1050 kg

Condition: good (used), Code: 0277 Brand: SCM Model: S 520 - CE Standard Automatic thickness planer for wood, carpentry shops, custom-made furniture, furniture factories, sawmills, woodworking shops, wood window frames, shipyards, plastics, composite materials and various - CE Standard Technical data: Working width mm 520 Max working height mm 250 Min working height 3 mm Min working length 210 mm N° 4 knives Automatic table lifting Feed speed 5-8-12-18 mt/min Motor Hp 5,5 Ltsdpfxex Ivfrj Affja Suction inlet diameter 150 mm Overall dimensions mm 1050 x 1000 x 1050 h Weight kg 650

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Ltjdpfxex Iugue Affsa Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine!

Condition: excellent (used), CATALOG NUMBER 7662 TECHNICAL SPECIFICATIONS - max working width: 770mm - max working thickness: 200mm * top section: - toothed feed roller - ratchets - pressure - toothed feed rollers, 2 pcs - pressure - 4-knife planing shaft, 770mm, 7.5kW - pressure - smooth feed roller * bottom section: - adjustable infeed table - adjustable smooth feed roller - 4-knife planing shaft, 770mm, 5.5kW - 2 adjustable feed rollers in lower table - electric height adjustment - lifting motor approx. 1.5kW - 6 feed speeds: 6, 9.5, 12, 15, 19, 30 m/min - feed motor 3.2kW - extraction port diameter: 1x160mm, 1x200mm - dimensions (L/W/H): 1470x1800x1700mm - weight approx. 2500kg Ltedpfswqcfdox Affja ADVANTAGES – German-made – very good condition – used planer Net price: 36,900 PLN Net price: 8,780 EUR Net price calculated at exchange rate 4.2 PLN/EUR (if exchange rate fluctuations are significant, the price may change)