Used Galvanotechnik Leipzig for sale (595)

Condition: used, Year of construction: 1996, Technical details: length: 4000 mm width: 800 mm height over floor: 400 mm Payload: 3,0 t dimensions L x W x H: 4,1 x 0,8 x 0,41 m weight: 0,153 t Several of these "long material trailers" are for sale in Leipzig. Nedeu Nv Syepfx Ad Nocl The trailers can be coupled together. The drawbar/trolley jack is charged separately, if required. Single axle operation with rigid axle. Solid rubber tires, track spacing = 590mm Sale individually but also in a package from 5 pieces possible. Price on request. i.D. *

Condition: used, Year of construction: 1995, Technical details: Table dimensions: 920 x 620 mm voltage: 220 / 50 V / Hz total power requirement: 0,77 kW weight of the machine ca.: 0,11 t Ncjdpfjvc Axcjx Ad Nsl dimensions L x W x H: ca.0,92 x 0,62 x 0,80 m Strapping Machine Semi-automatic machine for plastic strapping (approx. Ø 500 x 17mm) Strap holder located in the base cabinet table surface folded with 1,5mm chrome plate with stop LxWxH 345 x 80 x 20mm, adjustment approx. 32mm The adjustment of the tightening is done by display on linear scale. The packaging machine is mobile and easy to move = 4 castors, swiveling and 2 castors are braked. *

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Nsdpfx Aov A Sqhjd Nocl Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Condition: used, Year of construction: 2021, Technical details: feed pressure: 8 bar liter capacity: 620 l Nodpfx Adjxrdw Is Necl total power requirement: 4 kW sound level: 63 dB(A) revolutions per minute of the motor:: 920 Number of cylinders: 2 electrics - voltage/frequency: 400/50 V/Hz Pressure max.: 14,5 bar Number of working hours: 2195 h machine weight approx.: 194 kg dimensions L x W x H: 1,24 x 0,85 x 1,20 m Professional, soundproofed compressor with the lowest noise level in its class, designed to eliminate noise problems in working environments. The powerful 5.5 hp pump unit guarantees maximum efficiency and reliability. It is also equipped with an additional intake silencer, a belt tensioning device that regulates belt tension and facilitates replacement, and a forced ventilation fan for better cooling. The control panel with star-delta start control is positioned for easy reading and operation. The opening front door allows for easy maintenance. *

Year of construction: 1998, condition: used, Technical details: profile width: 50 mm work height max.: 950 mm interface: RS 232 Pinout Window profile processing machine for materials such as plastic, aluminum and wooden windows in a continuous process. The materials are conveyed by a pneumatic transport and clamping system. The system consists of two work stations (machines), an electrical control cabinet, and a control panel and transport units. As well as columns with transport system vibrator, chip transport unit and column with receipt printer. Our photos are first taken from the location and then further pictures are how the plant is stored in our stock ready for transport. Workstation no. 1 (machine 1): -sawing station with saw blade Ø 400 x 4,5mm -drilling unit with clamping cartridge (vertical upwards) Nodpeu Ibuwjfx Ad Njcl -drilling unit with clamping cartridge (hotizontal) -Boring with clamping cartridge (vertical down) -twin drilling unit with clamping cartridge (vertical down) -45° drilling unit with clamping cartridge (upwards) Working station no. 2 (machine 2): -drilling unit with clamping cartridge (vertical upwards) -milling spindle horizontal with 11 side milling cutters -Drilling unit with clamping cartridge (vertical down) -Drilling unit with clamping cartridge (vertical upwards) -Drilling unit with clamping cartridge horizontal 2 transport units: motor driven -LxWxH: 5.650 x 2.400 x 1.000mm -track width 1.980mm 2 pieces transport units: motor driven -LxWxH: 2.150 x 2.750 x 1.050mm -track width 2.300mm *

Condition: used, Technical details: plate width: 1000 mm plate thickness: 1 mm distance between columns: 1220 mm knife length: 1030 mm stroke adjustment: Oberwange: 100 mm stroke adjustment: Biegewanne: 45 mm bending angle max.: 140 ° weight of the machine ca.: 0,65 t dimension machine xH: 1,8 x 0,6 x 1,1 m - This swivel bending machine is equipped with two rear supports. Size of the round steel support = Ø 25 x 750mm, with linear scale. - Left side with counterweight. * Nedpfxou Ibz Ro Ad Nocl

Condition: used, Year of construction: 1985, Technical details: pressure: 100 t no. of strokes: 35-100 Hub/min throat: 360 mm ram adjustment: 20-130 mm ram surface area: 750x550 mm clamping plate on table: 1000x640 mm adjustment of stroke: 90 mm passage between the columns longitudinal/sideways: 610x500 / 440x550 mm daylight dimension : table/slide low: 300 mm total power requirement: 17,5 kW weight of the machine ca.: ca,7,0 t Ncjdpfx Aju Nfh Dsd Nsl dimension machine xH: 1,9x1,4x2,7 m - there are 5 T-slots lengthwise on the ram plate - centre hole = 50mm This press is currently for sale without controls. Optional on customer request completion possible. i.D. *

Condition: used, Year of construction: 2004, Technical details: balancing body max.: 12500 kg balancing body diameter w/o machining unit: 1500 mm bed length: 3000 mm swing diameter: 2400 über Maschinenbett mm rotor-shaft: Ø 1500 über Bandantreb voltage: 400 / 50 V/Hz drive power: 22 kw connected load: 25 kVA / 20 kW compressed air: 6 bar Weight approx.: ca. 5,5 t dimension machine xH: 3,3 x 1,5 x 2,0 m dimensions electric cabinet: 650 x 610 x 2150 mm Horizontal balancing machine, functional see video, dismantled, ready for loading ex Leipzig. The balancing machine is used to measure and balance the static or dynamic unbalance of rotors. Drive block/balancing speed: 5-speed and reverse gear (manual gearbox) max. 80 rpm; 160 rpm; 290 rpm; 470 rpm; 630 rpm. incl. PCX measuring electronics Measuring method force-measuring Measuring range of the electronics Speed 60 to 30,000 rpm. Bearing journal Ø 40 - 178mm / 140 - 445mm 2 base bodies (cast steel body), storage length between the bearing pedestals up to approx. 3000mm, adjustment with hand ratchet via toothed rack, with extension 1500mm Ncedpfx Adsu Iczro Njl 2 bearing pedestals/swing bearing blocks: Center height 1200mm measured in bed; 2x rollers Ø 195 x 56mm; 2x rollers; center distance 205mm; adjustment travel 350mm vertical *

Condition: used, Technical details: spindle taper: 40 number of spindles: 9 Stück weight of the machine ca.: 10,0 t total power requirement: 13 (17,5 PS) kW dimensions of machine: LxBxH: 4100x3400x3200 mm dimensions electric cabinet: LxBxH: 2100x350x1900 mm TRANSFER MACHINE DRILL AND THREADCUTTING MACHINE - ROTARY TRANSFER MACHINE with 9x Drill-& Mill Spindles - right 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible - left 2x Drill-&Mill Spindle from that 1x with U-axis flexible and 1x thread cutting unit with 9 stages flexible, such as radial 2x Drill-&Mill spindle and 1x thread cutting unit 9 stages, flexible - workpiece carrier with 8 clamping stations: workpiece holding barrel Ø 1000 mm (oil-pneumatic cycle), clamping station self-centering clamping jaws - Drilling: SK 40 intake; spindle stroke 125 mm; standard feed rate 0 - 2 m/min; RPM at 12 stages with 164-1005 rpm - Drill- and facing unit; SK 40 intake; spindle stroke 90 mm; standard feed rate 0 - 2 m/min; rapid traverse feed rate 7.5 m/min; RPM at 12 stages with 166 - 1020 rpm - 3 piece thread-cutting units: SK 40 Intake; Working stroke 125 mm; RPM at 12 stages with 31.5 - 194 rpm; clockwise and counterclockwise Njdpfx Adou Idwbs Nocl - 6 piece opposing drill units: SK 40 intake Equipment: - coolant system with feed - operation through control panel - chip box - counting mechanism - elevated platform with stairs i.D. *

Condition: used, Year of construction: 1978, Technical details: lifting capacity: 0,25 t height lower edge cantilever arm: 3450 mm cantilever arm length from center column: 3000 mm column diameter: 194 mm rotation: ca. 100 ° There are 3 column-mounted slewing cranes available for sale from Leipzig. ( price per piece) 2 column-mounted slewing jib cranes (No. 3 and No. 4) refurbished and 1 column-mounted slewing jib crane (No. 5) as is/is, without refurbishment. Demag-PK2 N-F hoist, 250kg lifting speed 10 m/min; fine lift 2.5 m/min. Load chain single chain; see type plate; control via pendant control, mobile manual at column base no. 3 and no. 5 is foot plate with 580 x 580 x 20 mm and at no. 4 foot plate 400 x 400 mm beam Column i.D. Ncedpou Szhpsfx Ad Nel *

Condition: new, This is a new machine which is manufactured in Romania by the manufacturer Emsil. Njdeu Id H Ajpfx Ad Nocl Customer wishes can be taken into account depending on technical implementability and are checked in advance by the manufacturer's engineering office. Narwhal features a drilling spindle that is made of hardened, tempered and rectified alloy steel. It is mounted with preloaded oblique precision ball bearings. The machine is also equipped with a milling and boring bar which can handle exceptional power and torque. The bar is made of nitrided alloy steel and is also mounted with oblique preloaded precision ball bearings. It moves on bronze guide bushings. The clamps of both units, used for securing and releasing the tool holder cone with ISO 50 coupling, open and close automatically Rotary Turntable: The table is turned by means of a double pinion gearbox, a central rod wth bearings and hydrostatic sliding block of the centre bearing which is of a suitable size to guarantee maximum precision with large loads, even unbalanced ones. There is a recirculating ball screw slide guide system for the x-axes. Both axes are equipped with a direct measuring system. CNC Axes Control: The 9 axes of the machine are monitored at all times. The monitoring system is equipped with a 15'' TFT screen, a control panel, remote diagnostics that alert the user in case of faults, a user memory, network connectivity, remote control of the process, integrated PLC, etc. The machine is compatible with the multiple control systems such as Heidenhain, Fanuc, Siemens etc. You can choose the sizes of machining of X/Y and Z axes: from 1200 - 3500 / 1000 - 3500 / 400 - 1500mm *

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Ncjdpfx Aju Nu Nkjd Njl Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *

Condition: used, Year of construction: 1993, Technical details: material: PUR Schaum Rotor-Ø: 315 mm compressed air: 6 bar The milling plant with milling and opening-up machine REKORD BR-ex (explosion proof up to 3 bar absolute) is intended exclusively for grinding PUR (polyurethane) foam. Data of the processable material: - pre-comminuted PUR foam pieces max. 20mm - humidity so that milling is still possible - throughput volume=approx. 130kg/h Ncodpfsu Nxdfjx Ad Nol Drives: - 5 drives (all geared motors) for roller dosing units, mill drive (squirrel cage motor), mixer, discharge screw conveyor, bucket wheel *

Condition: new, Year of construction: 2025, ZGR-2140/1,2 with additional equipment Ncsdpfx Adscntlle Njl Our products are best quality and have certificate CE. Plate Bending Machine ZGR-2140\1,2 Technical data: - Maximum working width: 2140 mm - Sheet gauge up to: 1,2 mm (Steel) - Titan-Zinc-Plate 1,2 mm, Aluminium Plate 2,0 mm Cooper plate 1,7 mm - Max. bending angle: 145 degrees - Rotary shears cut to full working length - Thickness of bending bar: 20 mm - Protractor - Weight: 290 kg - Rotary shears (max. plate gauge 0,8 mm / Steel) + 350 Euro - The machine have certificate CE and 12 months warranty. Shipping costs: its dependent on destination point, please ask us, we check Your total shipping costs.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4600x1400x1800 mm Ncodpfox Emvcox Ad Nel Weight 2200 kg total power requirement 9,15 kW

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6000x1400x1800 mm Weight 2500 kg total power requirement 8,05 kW Nedpjx Emu Ssfx Ad Nocl

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3960x1400x1800 mm Nodpfxex Emu Ee Ad Nocl Weight 1200 kg total power requirement 9,15 kW

Condition: used, Year of construction: 1999, Table dimensions 1200x730 mm Ncjdpsxq Hiwsfx Ad Nol Motor output 5,5 kW Spindle diameter 30 mm reus 3000-4500-6000-7000-10000 U/min Weight 810 kg

Condition: used, Year of construction: 1996, fence ja ja /nein Ncedpfxjxq Hiqe Ad Nol dimensions of machine 1000x1000x1300 mm Weight 800 kg

Condition: used, Year of construction: 2011, working area 500x300 mm Ncedoxq Hikjpfx Ad Nol Capacity 60 Watt Weight 100 kg

Condition: new, Year of construction: 2025, 355 mm Ncjdpfxswugp Uo Ad Nel 10000 m³/h Motor output 11 kW 4

Condition: new, Year of construction: 2025, 355 mm 12500 m³/h Motor output 15 kW Ncodpfx Adowugqfe Njl 4

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 3460x1000x2400 mm Number of filters 73 St. Number of dust containers 4 St. Njdpfx Adjw Nblre Njcl Weight 410 kg 355 mm 520 mm

Condition: new, Year of construction: 2025, 3000 m³/h power capacity 2,2 kW Speed 3000 U/min. 200 mm Njdpfxow Nblfs Ad Necl Dimensions (L/W/H) 1250x700x2000 mm Weight 160 kg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4100x1200x4920 mm Filter capacity 53,08 m² Number of filters 96 St. 400 mm Nedpfxswugpzo Ad Njcl Weight 1230 kg