Used Wood Engraving Machine for sale (65,632)

Condition: ready for operation (used), Year of construction: 2021, input voltage: 230 V, laser power: 30 W, input frequency: 50 Hz, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bodozaqk Sjpfx Aizodc Laser power: 30 W Voltage: 230 V Frequency: 50/60 Hz EQUIPMENT Rulers in mm Atmos Cube Rayjet 230 V Beige extraction connection cable 9po Cutting table MM and inches 8015 Power cable 20A Wooden packaging Note: Accessories are sold as is, without warranty. The principle applies: “Item purchased as seen.” The prospective buyer must verify the completeness of the item on site.

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Bjdpfowyda Uex Aizodc Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: not inspected (used), Industrial Engraving and Identification System, Dot Peen Marking Machine, MARKATOR MV5 Automatic Industrial Dot Peen Marking Station with Rotary Axis / Safety Enclosure, Markator MV5 SE-MK, Used Machine Manufacturer: MARKATOR Manfred Borries GmbH (Germany) Type: MV5 SE-MK Control unit type: MV5 SE-MK power unit with integrated display and industrial keyboard control panel Overall dimensions: Width: 1220 mm Depth: 1930 mm Height: 2100 mm Clamping range: 19–23 inch Premium-class German-made MARKATOR professional industrial marking station (dot peen marking station). This complete machine system represents the highest level of durable and precision factory marking technology for metal and plastic components. A special feature of the equipment is the integrated rotary unit (chuck / rotary table) and the enclosed safety cabin. Thanks to this design, the machine is suitable not only for marking flat surfaces, but also for automatic circumferential and peripheral marking and serial numbering of cylindrical parts, shafts, discs, pipe fittings, and gears. Bedjzauf Hopfx Aizjdc The dot peen (micro-percussion) marking technology provides extremely durable marking without weakening the material structure.

Condition: used, Engraving Cutter Grinding Machine MBB - Maschinenfabrik Baden Baden Type FSS Serial No. 2861 Year of manufacture: 1987 Grinding wheel diameter: 100 mm Bjdpfxeyxy S Re Aizsdc Grinding wheel speed: 4,600 rpm Motor power: 0.25 kW Power connection: 380 Volt, 50 Hz - Collet clamp device for collet 355E (saw thread M20x2 mm) - Including 3 collets Ø 0.5 - 6.0 - 17.0 mm - Maximum collet bore: 18 mm - Grinding wheel dressing device - Cup wheel Ø 100 mm - Operating manual Space required (L x W x H): 450 x 450 x 300 mm Weight: 32 kg Very good condition

Condition: new, Year of construction: 2026, WOOD SHAVINGS MACHINE KÄLIN Hobeltechnik, mod. MPC-P • Quantity of fresh shavings by hour: 3.800 Kg/hour • Measures logs box: 2.800mm x 1100mm x 1.300mm • Max. log input length: 2.650mm • 2 removables symmetrical cutterheads. Lenght 1.140mm. Each one in 3 pieces of: - Diameter: 200mm - Length: 380mm - Number of knifes: 8 - Sharpening full cutterheads, without removing knifes!! • 2 extra removables symmetrical cutterheads, for replacement during sharpening. Super fast cutterheads change patented system!! • Power of the cutting heads: 90 kW/120 HP Bdjdpfxevk Saxj Aizec • Feeding speed controlled by ELECTRONICAL INVERTER: 6 to 36 m/min • Automatic control of the forward-charge ratio of the machine • Power of the feed motor: 15 kW/20 HP • Control System of the material level inside the logs box, to avoid working without logs • Cabinet and control panel. Touch screem to control the machine • Motorized conveyor belt for the wood shavings. 800mm x 5.000mm • Weight: 11.000 Kg • CE

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, Bdodpfx Aiju R Sxxszoc frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Year of construction: 1996, Technical details: x-travel: 100 mm y-travel: 100 mm z-travel: 300 mm Table dimensions: 350 x 300 mm air pressure: 6 bar voltage: 220 / 240 V weight of the machine approx.: 40 kg dimensions: L:475 x B:300 x H:700 mm Application for engraving and/or marking work on parts on both straight and curved surfaces. with manual height adjustment with handwheel, digital controls with control unit/device Technifor UC200; size 420x290x100mm (external control command) Foot pedal XPE-M Test plate/table size 350x300mm, cast steel, (slight scratches) pneumatic connections Note: the processing head (engraving unit) is not included in the scope of delivery. Bdedpfeu Nu Ugsx Aizec *

Condition: as good as new (ex-display), functionality: fully functional, Compact and quiet CO2 laser with a maximum marking area of 460 x 305 mm (L x W) and a maximum object height of 145 mm. Possible applications: For laser engraving and laser cutting of plastics, wood, glass, and other organic materials, as well as coated surfaces. Engrave glass, create plastic signs, cut, mark, and define fold lines on paper. High-quality workmanship: The laser engraver consists of a one-piece aluminum housing and includes professional CAD/CAM software and an RF laser source. Efficient and safe operation: The space-saving laser is equipped with an automatic scanning function, autofocus for automatic vertical adjustment, an integrated control panel, and an illuminated marking table with a wide front-loading door. In addition, an air compressor for clean lenses and an extraction system are integrated. Laser parameters can be stored in a library. Multi-technology software: for the central collection of settings, designs, and results in a working environment. Equipped with a point-and-shoot function for easy positioning and job setup, as well as a print-and-cut function for cutting printed materials. Dimensions: 775 x 725 x 450 mm Marking area: 460 x 305 mm Maximum object height: 145 mm Maximum speed: 2,540 mm/s Laser source: CO2 Power: 40 W Bjdpfjy Ia Dxex Aizsdc Software: Gravostyle software (not included)

Condition: good (used), Year of construction: 1980, Engraving machine and copy milling machine Manufacturer DECKEL Type: GK 21, year approx. 1980 Maximum cutter diameter: 10 mm Spindle speeds 475 - 20,000 rpm Bdjdovk D A Eepfx Aizjc Travel paths: 160 mm Y300 mm Z 365 mm Table: 200 mm X 360 mm Machine cabinet with lots of accessories and machine documentation available. Weight: 620 kg.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece weight (max.): 40 kg, input voltage: 220 V, type of input current: AC, laser power: 60 W, type of cooling: air, total width: 1,055 mm, total height: 967 mm, total length: 834 mm, overall weight: 102 kg, sheet thickness aluminum (max.): 254 mm, scan area length: 610 mm, scan area width: 610 mm, table length: 610 mm, table width: 610 mm, laser wavelength: 700 nm, extraction nozzle diameter: 100 mm, Equipment: cabin, 2022 Epilog Fusion Edge 24 – 60W CO₂ Laser Cutter & Engraver 2022 Epilog Fusion Edge 24 CO₂ laser engraving and cutting machine with 60W laser, IRIS™ camera positioning, BOFA AD Oracle extraction, air assist pump and Photo Laser Plus software. Very lightly used, professional-grade laser cutter for wood, acrylic, leather, plastics and more. Description Professional Laser Engraving & Cutting System – Very Lightly Used Bjdpoyug Rqsfx Aizjdc The Fusion Edge 24 is one of Epilog’s most advanced compact laser systems, combining industrial motion control, high-speed engraving technology, and intuitive operation. It is ideal for sign makers, workshops, educational facilities, makerspaces, and manufacturing businesses requiring precise engraving and cutting capabilities. Machine Overview Manufacturer: Epilog Laser Model: Fusion Edge 24 Year: 2022 Laser Type: CO₂ Laser Power: 60 Watt Power Supply: 220V Condition: Excellent – Very Lightly Used Included Equipment The sale includes a complete turnkey laser engraving system: Epilog Fusion Edge 24 – 60 Watt CO₂ Laser Engraver/Cutter BOFA AD Oracle Industrial Fume Extraction Unit Air Assist Pump / Compressor Photo Laser Plus Software Hose kit for extraction system All original components supplied from new Key Features *High-Speed Laser Engraving The Fusion Edge series delivers engraving speeds up to 120 IPS (3.05 m/s) with 5G acceleration, enabling rapid production without sacrificing precision. *IRIS™ Camera Positioning System Integrated dual overhead cameras provide a live view of the work area, allowing accurate placement of artwork directly on materials and reducing setup time. *Touchscreen Control Interface The system includes a 7-inch touchscreen display for easy job selection, autofocus control, and job trace positioning directly at the machine. *Industrial Motion Control Brushless DC servo motors Ground and polished stainless steel linear motion system Teflon-coated bearings for smooth operation *Network Connectivity The Fusion Edge supports Ethernet, USB, and wireless networking, enabling easy integration into production workflows. *Radiance™ Beam Optics Advanced beam control technology delivers high resolution engraving across the entire work table. Technical Specifications Maximum Engraving Speed: 120 IPS (3.05 m/s) Acceleration: 5G Work Area: 24" × 24" (610 × 610 mm) Maximum Material Thickness: 10" (254 mm) Laser Tube: Air-cooled metal/ceramic CO₂ tube Resolution: 75 – 1200 DPI engraving quality Memory: Up to 1GB file processing Motion System: Brushless DC servo motors BOFA AD Oracle Extraction System The included BOFA AD Oracle industrial fume extraction unit ensures a clean and safe working environment. Key Specifications Airflow: approx. 380–400 m³/hr HEPA H13 filtration with 99.997% efficiency at 0.3 microns Multi-stage filtration with activated carbon Noise level:

Condition: excellent (used), Catalogue number 7321 TECHNICAL DATA Bodpfxoy Tkhxo Aizsdc - Max workpiece height: 90 mm - Max workpiece width: 130 mm From above: - Sliding belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From below: - Feed belt - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down) From the side: - Sanding units – 2 brushes - Brush motors: 2 × 0.55 kW - Manually adjustable brushes (up/down, front/back + angle) - Brush diameter: 220 mm - Stepless speed adjustment of sanding units via inverter - Stepless feed belt speed adjustment - Feed motor: 0.55 kW - Pull-out support table - Extraction port diameter: 3 × 120 mm - Overall dimensions (L/W/H): 2200 × 1200 × 1400 mm - Weight: 672 kg ADVANTAGES – Italian-made – 6 sanding units – Used sander – In very good condition Net price: 22,900 PLN Net price: 5,450 EUR (based on exchange rate of 4.2 EUR) (Prices may vary according to larger exchange rate fluctuations)

Condition: ready for operation (used), Sawn timber capacity: 1.5m³, max. sawn timber length: 4500mm, with control system, aluminum stacking strips and cables as accessories. The system has not been in operation for approximately ten years, the electronics would need to be checked. An on-site inspection is possible. Bedpfx Aiey Uydlezodc

Condition: used, Year of construction: 2001, power: 25 kW (33.99 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 5,000 kg, We offer this used P. BACCI DOUBLE vertical woodworking machining centre, year of manufacture 2001. Model: DOUBLE Serial number: AB001 Year of manufacture: 2001 Bedpjyx S Svjfx Aizsdc Voltage: 380 V Frequency: 50 Hz Power: 25 kW Weight: 5000 kg If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new, Year of construction: 2025, functionality: fully functional, Applications & Customer Benefits: The Arno® Screen SD Series (SD 1300–2100 / SD 1500–3400 / SD 2100–6000) are robust, semi-mobile screening drums designed for metal recycling and material separation. Ideal for processing metal chips, sheet metal, punching waste, and electronic scrap, they deliver precise three-fraction separation, high throughput, and flexible configuration for various screening tasks. Key Features: • Available in versions with Extension (larger drum area) or Bunker (uniform material feed) • Exclusive hexagonal drum design for superior precision and flow • Adjustable perforation sizes for customizable screening performance Bdedoxvqhuepfx Aizsc • Semi-mobile, foldable structure for flexible setup and transport • Optional Hardox drum plates for extended durability and wear resistance Tech Highlights: Sieve length 2100/3400/6000 mm · Screen Perforation 1-100/6-100/10-100 mm · Screen Perforation 1-100/6-100/10-100 mm · Power 5,5/7,5/7,5 kw · Installation surface 3,3 x 2,1 x 2,9/5,6 x 1,8/9,25 m

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, shaft length: 355 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: water, laser wavelength: 355 nm, input frequency: 50 Hz, Equipment: cabin, UV Laser Engraving Machine with 20 Watt Laser Power - Laser source with 355nm wavelength / 20 watts - New machine, zero operating hours - incl. rotary axis - incl. Windows 64-bit PC system - incl. 22" monitor - fully installed and calibrated - Engraving software in German - 3D software (MM3D) - very user-friendly - plug and play operation - UV laser source with 20 watts for high-contrast, fast markings with extremely high resolution - engraves virtually all metals (stainless steel, brass, aluminum, etc.) - engraves virtually all plastics (including PVC, silicone, etc.) - engraves on real glass (including crystal glass) - can cut real glass - heavy-duty industrial quality - Complete system / ready for immediate operation - Working area approx. 500 x 600 x 600 mm (WxDxH) - Clamping surface with threaded holes in a 50 mm grid - LED workspace lighting - 50 mm pipe connection for fume extraction - Engraving area approx. 150x150 / 200x200 / 300x300 mm (selectable) - 3D scanner for marking surfaces of any shape - incl. foot switch to start the engraving process Sales exclusively to commercial customers. Delivery / consultation / sales only within Germany / Austria / Switzerland Please also consider our attractive leasing and hire-purchase offers. Machine dimensions approx.: Width: 800 mm Height: 1800 mm Depth: 1000 mm Weight: approx. 180 kg Bdjdpeflrnaofx Aizjc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 8 kW (10.88 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, OPTIMAT BHX055 Bodpfx Aisyvh Dpjzsdc

Condition: used, Year of construction: 2016, machine/vehicle number: 7405_408, functionality: fully functional, operating hours: 788 h, HOLZ-HER Evolution 7405 White Edition CNC Machining Center For sale is a very well-maintained HOLZ-HER Evolution 7405 White Edition, year of manufacture 2016. The machine is in excellent technical and visual condition and can be demonstrated under power. A particular highlight is the exceptionally low processing time: only 788 hours with active feed. The machine was professionally serviced and completely recalibrated by the manufacturer in 2021. Since then, it has seen only limited use and runs smoothly, precisely, and reliably. Technical Data Manufacturer: HOLZ-HER Model: Evolution 7405 White Edition Year of manufacture: 2016 Serial number: 7405_408 Software / Controls CAMPUS Version: 6.4.4.2 NC-Hops Version: 6.6.2.207 Operating Hours Active feed / Processing hours: only 788 h Machine ON: 6,723 h Features 4-MAT configuration Drilling unit with 15 spindles Saw and grooving unit Milling unit with 6-position tool changer Handheld control device Vertical and horizontal processing Vacuum clamping system Ideally suited for: Furniture production Interior fittings Kitchen construction Joineries CNC entry or capacity expansion Condition Very well-maintained overall condition Regularly serviced Professionally recalibrated by the manufacturer in 2021 Minimal use since recalibration Immediately ready for operation Runs very cleanly and precisely No known technical defects Machine can be inspected and tested during operation Availability Available from calendar week 25 / 2026 Inspection possible by appointment Support with loading and transport organization available Bdedpfx Aiey Sicxezec Price Asking price: €43,900 net

Year of construction: 2021, condition: new, functionality: fully functional, A used one is for sale Felder Milling machine F-900 Z with tenoning and slotting table length 1300mm The machine is inot used at all and therefore in mint (new) condition. Technical data: - 5 milling speeds - Milling spindle swivels 90° - 45° - Milling stop for tools up to Ø 230mm - Multi-adjustment system Bodpfx Asy Iyvnoizjdc - Tapping and slotting table 1300mm - electrically height-adjustable + swiveling "PowerDrive" - Engine power 7,3kW SD start

Condition: good (used), Year of construction: 1982, functionality: fully functional, Table dimensions: 1400 x 1000 mm Table rotates from 0 to 360 degrees Spindle taper: ISO40 Spindle swivels Minimum spindle speed: 90 rpm Bdedpfx Ajy Iwf Hsizoc Maximum spindle speed: 2880 rpm Machine height: 3260 mm Machine length: 2650 mm Machine width: 2600 mm Machine weight: 5100 kg Accessories, equipment: - Built-in rotary table - Rapid traverse - Motorized height adjustment - Machine light The machine is in very good condition.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 1000028110, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 2,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 60 mm, workpiece length (max.): 2,600 mm, workpiece width (max.): 900 mm, workpiece height (max.): 60 mm, Equipment: CE marking, documentation/manual, For sale: Premium vertical CNC machining center. The machine was purchased new; we are the first and only owners, ensuring a clear maintenance and usage history. The machine is in fully operational condition, exceptionally well maintained, and requires no further investment. - Working range x/y/z: 2600-900-60 mm Bedpfx Aey Sfw Esizjdc - Working head with BH17 drilling head (10 horizontal and 6 vertical drills) - Speed up to 65 m/min - BSolid control - Automatic dimension reading via laser

Condition: excellent (used), For sale: classic, proven Gravograph IM3 mechanical engraving machine – perfect for nameplates, signs, industrial marking or jewelry. Bjdoun U Ucopfx Aizsdc • Model: Gravograph IM3 • Manufacturer: GRAVOGRAPH GMBH, Umkirch (Germany) • Fully functional motor, clean guides • Set includes a complete collection of fonts and symbols • Stable cast construction • Precise pantograph control • Sturdy work table with linear guidance Used condition, technically sound. Suitable for both workshop and decorative or advertising purposes.

Condition: excellent (used), For sale: Professional dot peen marking machine PRO PEN P5000 (GravoTech Marking SAS), distributed by HAHN+KOLB Gruppe. This is a fully industrial-grade device designed for permanent marking of metal and plastic parts—serial numbers, logos, codes, and production markings. Specifications: • Model: Propen P5000 Pn/d • Year of manufacture: 2010 • Power supply: 100–240 V, 50/60 Hz • Power: 150 W • Operating pressure: 5.5 bar (pneumatic supply) • Manufacturer: GravoTech Marking SAS, France • Operator panel with touchscreen + HP keyboard • Robust worktable with guides. The machine is complete, fully functional, and ready for operation. Ideal for workshops, production plants, tool rooms, and wherever quick and precise permanent marking is required. Very good condition—well-maintained unit with minimal signs of use. Bdedjw R Spqopfx Aizjc

Condition: used, Engraving machine with computer system Sign Pro 98 Transport and loading can be organised throughout Europe upon request and for an additional fee. Prices are exclusive of VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS AND MORE. Are you looking for a high-quality but affordable machine for your production? Or do you want to sell your machine? Bdsdjy H H Eyepfx Aizoc For more information or to contact us, please use the contact form.

Condition: used, Year of construction: 2000, machine/vehicle number: AA1/11510, functionality: fully functional, operating hours: 19,250 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, travel distance X-axis: 3,080 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,080 mm, workpiece width (max.): 1,200 mm, number of axes: 3, number of slots in tool magazine: 12, total height: 2,346 mm, overall weight: 4,000 kg, Equipment: CE marking, documentation/manual, We are offering this used SCM Record 130 machining center, year of manufacture 2000. Equipped with a more powerful vacuum pump (2050 m³/h), vector rotary axis, angle gearbox adjustable from 0 to 100 degrees (HSK63), drilling unit with 9 spindles, and low operating hours. If you have any questions or require further information, please feel free to send us a message or call us. Bdodpfx Aeyzadrjizec

Condition: used, Year of construction: 1969, functionality: fully functional, machine/vehicle number: Gel/1 02.0026, Used engraving machine Bsdpfx Aioyg Rv Ujzjdc Make: Franz Kuhlmann Serial No.: Gml/1 / 02.0026 with accessories