Used Four-Side Planing Machine for sale (108,153)

Year of construction: 2001, condition: excellent (used), planing width 220 mm Blsdpfsiduh Njx Acysp planing height 120 mm 1 lower head 5.5 kW 2 right head 4 kW 3 left head 4 kW 4 upper head 7.5 kW two feed speeds power of the feed motor 1.1 kW electrically regulated machine by means of an operator panel pneumatic material pressure

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 113382, working width: 230 mm, working height: 120 mm, Equipment: documentation/manual, I am selling a Weinig Variomat planer in very good condition. The machine is still in use and can be viewed and tested until the end of August. We are planning to purchase another one, as we need a larger number of planing heads. Bljdpfsw Hyqisx Acyop

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2166, working width: 230 mm, working height: 125 mm, spindle diameter: 40 mm, spindle speed (max.): 6,200 rpm, TECHNICAL DETAILS Minimum working height: 8 mm Maximum working height: 125 mm Minimum working width: 18 mm Maximum working width: 230 mm Minimum feed speed: 6 m/min Maximum feed speed: 28 m/min Spindle speed: 6,200 rpm Spindle diameter: 40 mm MACHINE DETAILS Electrical Data Main fuse: 80 A Machine voltage: 400 V, 3PH, 50Hz Bedjwyviuopfx Acyolp Motors Bottom spindle: 5.5 - 7.5 kW Right spindle: 5.5 - 7.5 kW Left spindle: 7.5 - 10 kW Top spindle: 7.5 - 10 kW Dimensions & Weight Dimensions L x W x H: 4,400 x 2,000 x 1,850 mm Weight: 4,000 kg

Condition: ready for operation (used), functionality: fully functional, working width: 850 mm, Four-side planer Manufacturer: Kupfermühle Model: VUIN Maximum working width: approx. 850 mm Maximum planing height: approx. 200 mm Planing spindle with 4 knives Blodpfxow Hr Nks Acyop With electronic height adjustment 1 horizontal shaft from above, 7.5 kW 1 horizontal shaft from below, 7.5 kW 1 vertical shaft from the left, 4 kW 1 vertical shaft from the right, 4 kW Feed motor 3 kW

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 60 Bledjwxwyfspfx Acysp Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40. Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 1 x Kw 4,5 Hogging Units KD 11 (2 x Kw 6,6) . Free space EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) QA 34 (FeMa-Tech) Pressure zone (N.C. adjustment) "A" Edge coils supporting unit (No. of reels) 6 Snipping (end-cutting) unit HL84 (2 x Kw 0,22) 0°-30° Rough Trimming unit (2 x Kw 0,55) Multi-Profile Copying unit by N.C (fine and contour trimming) FK 13 (2 x Kw 0,4) revolver 8+8 Free space Profile Scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11 OPTIONAL: Milling grooving unit UF11 (1 x Kw 4)

Year of construction: 1962, condition: good (used), Manufacturer: Anderle, type 40, serial no.: 948/336, year of manufacture: 1962 Blsdpfx Acsw Hdu Ssyop FROM TRAINING WORKSHOP

Year of construction: 2014, condition: like new (used), "EASY PLUS" electronic control from the control panel 2 axes: - Automatic control of the left spindle vertical and horizontal position of the upper spindle. - Selection of the feed speed. - 7 "color LCD display Min.working width (finished size) 25 mm Working width (finished size) 230 mm Min.working height (finished size) 6 mm Working height (finished size) 120 mm Min. Length of a single element 450 mm Variable feed speed controlled by an inverter 5 - 25 m / min Pneumatic pressure of the feed shafts Top feed shaft in front of the planer 3kW feed motor power 5.5 kW planer motor power Vertical spindle motor power (single) 11kW Bedpfxsh Nvt Ue Acyolp Power of the upper horizontal spindle motor 9kW Spindle speed 6000 rpm. Spindle diameter 40 mm Length of the vertical spindles 140 mm Length of the horizontal spindles 250 mm Axial adjustment of the vertical spindles relative to the 40 mm worktable Axial adjustment of the horizontal spindles in relation to the right ruler of 40 mm Min./max. tool diameter on the planer 120 - 140 mm Min./max. tool diameter on vertical spindles 100 - 180 mm Max. Profile on the vertical spindle 40 mm Min./max. tool diameter on the upper spindle 125 (100-180) mm Feed shaft diameter 140 mm Length of the feeding table 2000 mm Quick adjustment of the table at the entrance and 10 mm ruler Manual pump for greasing the STD table

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, BOTTOM GRINDER FOR BEAMS WORKING DIMENSIONS 600x600 mm 15 kW Bsdpfjw E Ewxex Acyelp

Condition: like new (used), Year of construction: 2004, Double-side glass drilling machine BUSETTI GIO 1250 Semi-automatic Year of production: 2004 With roller table Bjdeiy Dxkopfx Acyjlp With manual positioning Water tank with pump included Very good and clean condition Availability immediate

Condition: used, Year of construction: 1992, used Manufacturer: SCM Model: Compact 220 S Year of manufacture: 1992 Machine No.: 110830 GS-certified for wood dust Number of spindles: 4 Spindle arrangement: bottom–right–left–top Motors: 4–5.5–4 kW Planing width approx. 220 mm Planing height approx. 120 mm Spindle diameter: 40 mm Blodow En H Njpfx Acyep Table length approx. 2500 mm Cutterhead system: Tersa 230/125 Pre-milling cutter Pneumatic roller pressure Infeed before the jointer Feed speed 5–20 m/min Profiling Sliding rollers Extraction connection 4 x 120 mm Required space approx. 3000 mm x 1400 mm x 1600 mm Weight approx. 1500 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-is condition, as inspected, without guarantee or warranty.

Condition: excellent (used), Double side - First (1st) machine in a line Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 60 Working width (min/max) mm 195 / 1500 Numerical Control PC 22 /Software WoodCommander Bjdpfx Aowxwxbocyjlp Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units KD 10 (2 x Kw 6,6) Free space EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) QA 34 (FeMa-Tech) Pressure zone (N.C. adjustment) Type "A" Edge coils support (No. 6 reels) Milling-grooving units SF 20 (HSK63F - Kw 4,5) 0°-90° CN Horizontal Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit MF 21 (2 x kW 0,55) Profile Scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: good (used), functionality: fully functional, Complete Weinig planing line consisting of: Bundle feeding unit, tipping destacker. Cross conveyor with waste rejection function. Transfer to twin bandsaw. Twin bandsaw with diagonal cutting function. Singulation before planing infeed. Through-feed crosscut saw. Infeed to planing machine. Weinig 22 B planer with 8 spindles. Electronic feed drive with frequency inverter up to 80 m/min. In 2023, the planer was fitted with a new frequency-controlled feed system as well as new table and wear plates. Outfeed from planing machine. Almab stacking system with stick magazine for 9 sticks. Additional Almab stacking system. Bodswvqt Topfx Acyolp The planing line is fully mechanised. Specifications: Wood length range 2–6.10 m. Thickness 10–120 mm. Width 40–220 mm. Bundle size input: 1.20 × 1.30 m. Output: 1.20 × 1.20 m (W × H). Well-maintained system. Regular service.

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 12/09742, working width: 3,000 mm, bale length: 3,050 mm, roller (bottom) diameter: 400 mm, roller (top) diameter: 405 mm, sheet thickness (max.): 30 mm, TECHNICAL DETAILS Sheet width: 3,000 mm Upper roll working length: 3,050 mm Lower roll working length: 3,050 mm Side rolls working length: 3,100 mm Upper roll diameter: 405 mm Lower roll diameter: 400 mm Side rolls diameter: 320 mm Plate thickness for bending: max. 30.8 mm Plate pre-bending: max. 20 mm Distance between upper and lower roll: 70 mm MACHINE DETAILS Blsdpsw Eh Hvjfx Acyjp Total power requirement: 45 kW Electrical connection: 220/380 V Roll drives: 2 units FURTHER DETAILS Tilting of upper roll from operator panel Opening of swing bearing from operator panel Overload protection for conical bending device

Year of construction: 2020, condition: excellent (used), Working width (mm) 400 Min.working width (mm) 8 Thicknesser input (mm) 20-120 Minimum working length (mm) 500 Up and down spindle motor (KW) 5.5 Bljdpfxohlhikj Acyjp Left and right spindle motors (KW) 3/3

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 4,997 h, load capacity: 5,000 kg, lifting height: 5,952 mm, free lift: 1,800 mm, fuel type: gas, mast type: triplex, construction height: 2,880 mm, fork carriage width: 1,360 mm, fork length: 1,350 mm, empty load weight: 7,500 kg, total length: 2,210 mm, drive type: Treibgas, construction width: 2,700 mm, Four-way side loader Load center: 600 Fork width: 165 mm Fork thickness: 60 mm Mast type: Triplex Condition: Operational and fully functional Technical condition: Very good Front tire type: Super elastic Front tire size: 355/50-15 Rear tire type: Super elastic Rear tire size: 23x10-12 Description: In addition to this Combilift model, we have approximately 200 heavy-duty forklifts, compact forklifts, standard forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our homepage – sago-online. Leasing and financing options available at attractive rates. We are also happy to purchase your used equipment outright, even if you do not acquire a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to provide you with detailed advice on this C5000L. P.S.: Our master forklift workshop specializes in repairs, servicing, overhauls, and custom construction of forklifts from 8 tons and up. We can also display your vehicle for consignment sale at our facility. Fork positioner Blodjwwm U Ajpfx Acyjp 1x NIVO fork; telescopic forks Heater, full cab, full free lift Platform height: 670 mm

Condition: excellent (used), Four-side planer / four-sided moulding machine Compact 23 Max. working width 230 mm Max. working height 125 mm Max. profile tool diameter 180 mm Surfacing spindle 4 kW Vertical spindle 5.5 kW Upper horizontal spindle 4 kW Lower horizontal spindle 4 kW Machine dimensions 3200 x 1400 x 1600 mm, Weight 1850 kg Bjdpfjt Dk Rxsx Acyelp

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 6,138 h, load capacity: 4,000 kg, lifting height: 4,800 mm, fuel type: diesel, mast type: duplex, construction height: 3,350 mm, drive type: Diesel, Four-way sideloader Mast type: Duplex Condition: Ready for use and fully functional Bedpfou Acrtox Acyolp Technical condition: good Fork positioner,

Condition: like new (used), Year of construction: 2021, Technical data: Bodjw An Uhepfx Acyjlp Conical bending machine Working width: 1050 mm Max. bending capacity for standard steel St40: 4.0 mm Diameter of conical upper roller: 70 - 185 mm Diameter of side and central lower rollers: 105 mm Conical bending device Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Net weight: approx. 3 tonnes Condition: Very little used, as new condition The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, working width 230mm working height 120mm 4 heads Bljdow Afm Ijpfx Acyjp heads adjustable in two axes diameter of spindles 40mm control of planing dimensions from the panel star/delta start of spindles two feed gears table top lubrication system year of production 1998

Year of construction: 1974, condition: good (used), Planing width mm 170 Planing height mm 140 Blsdpfx Acjg Sa Iweyjp Number of spindles 5 Spindle arrangement down/right/left/up/universal Spindle diameter mm 40

Condition: ready for operation (used), working width 260mm working height 150mm toothed roller in the feed table before the first head 5 heads head arrangement: lower/right/left/top/bottom electric setting of planing dimensions stepless feed adjustable up to 24m/min pneumatic clamps of the pulling rollers head adjustment in two axes Bsdew Afl Rspfx Acyolp engines: 1. 11kW 2. 11kW 3. 12kW 4. 11kW 5. 7.5kW pulling roller drive via cardan shafts feeding table length 2m chrome plated table additional pulling roller at the right head, so-called tandem horizontal pneumatic clamps set of heads included with the machine

Condition: ready for operation (used), max working width 500mm max working height 200mm Blsdpfx Ajw Afkyecysp height of side heads 10cm changenable side heads 2-knives shafts roll in the table manual adjustment of side heads two feed speed additional spindles in the outfeed

Condition: excellent (used), working width 230mm working height 120mm Bledpfx Acow Afdtsyep 4 spindles spindles diameter 40mm spindles speed 6000 RPM variable regulated feeder pneumatic pressure rolls electric adjustment of top head table lubrication

Condition: excellent (used), working width 230mm working height 120mm 5 heads heads set: bottom/right/left/top/uni two axes heads regulation Bljdpfx Acow Afdgjysp pneumatic clamps variable regulated feeder spindles diameter 40mm delta/star start table lubrication

Condition: excellent (used), working width 230mm working height 120mm 6 heads heads set: bottom/right/left/top/top/bottom spindles diameter 40mm Bodpsw Afcvsfx Acyjlp Memory System control table lubrication spindles speed 6000 RPM