Used Four-Side Planing Machine for sale (100,343)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 + in stips / lippings (max mm 1) Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 (266) / 3300 Numerical Control / Software ICOS Open (Windows base) Adjustable feeding speed (m/min ) 10 - 50 (Master & Slave) Safety and sound-proof enclosures/cabins SIZING PART (for each side): Anti-chipping Milling Unit 75.186 (1 x Kw 4,4) Hogging Units (2 x Kw 6,6) Max 35 m/min Milling unit (Joint Trimmer) 75.186 (1 x Kw 4,4) EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt system) VTG 3-24 + 283.203 Pressure zone + Edge coils supporting unit (No. 24 reels) Snipping (end-cutting) unit 08.42 / 30 / B (2 x Kw 0,66) 30 m/min (0°-25°) Rough/Fine Trimming unit 08.055 (2 x Kw 1) 0°-30° (30 m/min) Multi Function Unit (Profile contour Trimming unit) MFA 08.342 (2 x Kw 0,66) SERVO - 20m/min Knjdpjxggzlofx Affef OPTIONAL: KFA 30 Profile Scraping unit 08.519 Glue scraping unit 08.521 Buffing unit 08.604 (Kw 0,25 x 4) No. 2 Grooving units 08.190 (1 x Left-hand + 1 x Right-hand) (Kw 4,5 x 2) swivelling 90°/180°/270°

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Kodox Ii Hvepfx Affonf Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), CATALOG NUMBER 6674 TECHNICAL SPECIFICATIONS - Max planing width: 150 mm - Max planing height: 130 mm 7 spindles: 1) bottom horizontal, 150 mm, 3 kW 2) right vertical, 130 mm, 3 kW 3) left vertical, 130 mm, 4 kW 4) top horizontal, 150 mm, 4 kW 5) bottom horizontal, 150 mm, 3 kW 6) right vertical, 130 mm, 4 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable up/down and right/left - 4 driven toothed feed rollers from above - 4 top rubber outfeed feed rollers - 2 top pressure rollers - Electric planing thickness adjustment: 0.25 kW - Infeed table length: 1970 mm - Central table lubrication - Stepless feed speed adjustment - Feed motor: 1.5 kW - Extraction port diameters: 6x120 mm - Dimensions (LxWxH): 4000x1300x1600 mm - Weight: approx. 3000 kg – German manufacture – 6-head machine – Used moulder/planer in very good condition Knsdpfx Asiba Evoffjf Net price: 36,900 PLN Net price: 8,790 EUR Net price based on 4.2 PLN/EUR exchange rate (Significant currency fluctuations may cause price adjustments)

Condition: used, Year of construction: 2020, Packaging Machine Fully Automatic Side Sealing Machine Profi Packer Manufacturer: Schlichter Model: SCV 400 Pro Year of Manufacture: 2020 Longitudinal Sealing: Continuous Photoelectric Sensors: Horizontal and vertical (standard) Compressed Air: 6 bar Conveyor Speed per Minute: min. 5 meters, max. 30 meters Film Core Ø: 76 mm Max. Film Roll Ø: 350 mm, with optional folding device up to 700 mm! Max. Film Roll Width: 650 mm Kedpfjxuglmex Affonf Sealing Bar Width: 300 mm Product Width (min./max.): 50 mm to 410 mm Product Height (min./max.): 1 mm to 250 mm Product Length (min.): 50 mm, (max.): unlimited Film Thickness: 7 to 80 μm Film Material: Polyolefin fine shrink film, Polyethylene, PVC; PLA and other bio films Cycles per Minute: up to approx. 85 cycles Machine Dimensions (L x W x H): 2,200 x 1,680 x 1,800 mm Weight: 800 kg Shrink Tunnel: Model: SCT 400U Year of Manufacture: 2020 Passage Width: 450 mm Passage Height: 280 mm Heating Power: 14 kW Dimensions (L x W x H): 2,065 x 1,065 x 1,340 mm

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 3 h, Automatic shrink wrapping machine with continuous side sealing with tunnel Knjdpfx Afjvr E Aiofef

Condition: used, Year of construction: 1994, Used machine Kjdpfxjx Enrfj Affenf Year of manufacture: 1994 Features and Technical Data: - Length of jointer table: 2100 mm - Spindle diameter: 30 mm - Planing head diameter: 100 mm - Planer spindle speed: 6000 rpm - Working width: 30 - 180 mm - Working height: 6 - 120 mm - Motor power, bottom/left/right: 3.7 kW each - Motor power, top (thicknessing shaft): 5.5 kW - Feed speed: 6 and 12 m/min - Electric height adjustment - With 1/10 step control - Including electronically controlled infeed roller - Including planing heads - Extraction connectors: 160/120/120/140 mm Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 40 Working width (min/max) mm 225 / 2500 Numerical Control POWERCONTROL PC23 Power Touch /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 1000 Working line (work units support tables), manual adjustment mm 30 – 80 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) + Free Space EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + QA65 Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL PK30 (2 x kW 0,8), speed 30 m/min Rough Trimming unit BF20 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FF30 + FF32 (4 x kW 0,4) with FlexTrim Free Space Profile edge scraping unit PN 20 Kodov Rpdnopfx Affsnf Finish processing unit (Glue scraper + Buffing unit) FA 21. Spraying Unit (for polishing liquid) No. 3 Milling grooving unit SF20 (1 x Left + 2 x Right) (3 x kW 6,6) (N.C. adjustment)

Condition: excellent (used), Year of construction: 2010, Technical Data: Working width: 6,500 mm Max. bending capacity: 7.0 mm Max. prebending: 5.0 mm CNC control Top roll diameter: 420 mm Diameter of side rolls: 315 mm Diameter of central lower roll: 400 mm Conical bending device via tilting of the two side rolls Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 22 kW Dimensions (L x W x H): approx. 9,200 x 2,350 x 1,900 mm Net weight: approx. 39 tons Additional equipment: Side bending aid Knjdpex Iitiefx Affsf Adjustable upper bending aid Condition: Very good condition, little used Operating hours: 100 h The seller accepts no liability for errors in writing or data transmission. The machine is, in terms of appearance, technology, and wear, commensurate with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5830x1860x1830 mm Weight 6300 kg Knodov A Hr Hjpfx Affef Total power requirement 54,75 kw

Condition: good (used), Year of construction: 2003, machine/vehicle number: 02263, Offer 25492 Technical Data - Upper and lower rollers driven, each roller hydraulically adjustable - Suitable for prebending and conical rolling, side supports can be swung out - Operation via separate control panel with digital actual value display - Max. working width: 2050 mm - Max. sheet thickness at 400 N/mm² without prebending: 8 mm - Max. sheet thickness at 400 N/mm² with prebending: 6 mm Kjdpfxjx H R Rmo Affonf - Bending capacity refers to at least 3 × top roller diameter - Hardened rollers - Top roller diameter: 190 mm - Side roller diameter: 170 mm - Bottom roller diameter: 140 mm - Drive: 400 V / 3.0 kW - Required space: approx. W 3500 x H 1300 x D 1300 mm - Weight: approx. 3200 kg

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 3,261 h, load capacity: 4,000 kg, lifting height: 7,500 mm, fuel type: electric, mast type: triplex, fork carriage width: 3,100 mm, fork length: 1,500 mm, drive type: Elektro, Four-way side loader Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Very good Battery Voltage: 48V Kjdpfx Aox Efcfoffsnf Battery Capacity: 930Ah Description: In addition to this Hubtex model, we have approximately 200 other heavy-duty forklifts, compact forklifts, counterbalance forklifts, and side loaders available at our warehouses in Hamburg and Gdansk. Visit our homepage - sago-online. Lease-purchase and financing on favorable terms are always possible for us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will gladly provide you with detailed advice on this MQ40. P.S.: Our forklift master workshop specializes in repair, maintenance, refurbishment, and custom builds for forklifts from 8 tons upwards. We can also offer your vehicle for consignment sale at our premises. Fork positioner, Full free lift,

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 2,125 h, load capacity: 4,000 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, construction height: 2,770 mm, fork length: 1,200 mm, drive type: Elektro, Four-way side loader Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Fork positioner, heating, full cabin, Kodpex H Dc Ajfx Affonf

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 40 Working width (min/max) mm 225 / 2500 Numerical Control NC 21 / HOMATIC Adjustable feeding speed (m/min) 15 - 50 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 1 x Kw 4,5 Hogging Units KD 11 (2 x Kw 6,6) LEFT SIDE: Jumping Milling Unit (for grooving) SF 20 (Kw 6,6 x 1) 0°-90° RIGHT SIDE: Free space EDGE-BANDING PART (for each side): Knedpfx Aohvi E Ieffef Glueing Unit (Hot Melt Glue + Quick Melt system) A3 + A34 Edge coils support (No 6 reels) Band Pressure zone "A" (1 + 4 rollers) Snipping (end-cutting) unit HL 04 (2 x kW 0,18) Rough Trimming unit 2 x Kw 0,55 (0°-35°) Multi Function Unit (Profile contour Trimming unit) FK 11 - 2 x Kw 0,4 Profile edge scraping unit PN 20 Glue scraping unit (Pneu) Buffing unit (2 x Kw 0,25)

Condition: used, Technical data: Planing width: 310 mm Planing height: 10 - 310 mm Number of spindles: 4 Spindle arrangement: bottom-top, left-right Multiple rip saw at machine infeed Infinitely variable feed adjustment with gear motor Feed on chains 12 rollers on the lower table 1 auxiliary roller 2 upper driven toothed rollers 2 upper driven smooth rollers Knives on the top head: 10 pcs Knives on the bottom head: 10 pcs 4 additional heads Kedpfxex Hx Due Affenf Side vertical shafts with lateral adjustment Table height adjustment (up/down) on 4 cylinders Electrically lifted table (up/down) Total installed power: 107.7 kW Extraction nozzle diameters: 2 x 200 mm / 160 mm / 2 x 80 mm Powered infeed table width: 350 mm Hydraulic pressure Total motor power: 4 kW Dimensions: 1500x1500x1500 mm Dimensions: Length: 3800 + 1500 mm Width: 1800 mm Height: 2300 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2300x1150x980 mm Kjdpfx Afev A Hhuofenf Weight 900 kg Total power requirement 7,5 kw

Condition: new, Saw shaft and saw bush Tool shaft and clamping bush Kjdpfx Afonladhofsnf

Condition: good (used), WEINIG PROFIMAT 22N four-side planer - DTR - German production - adjustable spindles TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) 4 kW lower head 2) right head 3) 5.5 kW left head 4) 4 kW upper head 5) universal head 360 ° 4 kW 2.2 kW feed motor feed speed 5 - 20 m / min Knjdoh Akbaepfx Affsf four upper drawing steel rollers two upper pulling rubber rollers one pull roller in the table top feed on cardan shafts electric height adjustment pre-table length 1970 mm central lubrication pneumatic clamps dimensions of the machine (length / width / height) 380/200/170 cm weight ~ 2000 kg

Condition: excellent (used), Catalogue number 7288 TECHNICAL DATA - Max. workpiece width: 230 mm - Max. workpiece height: 130 mm 6 spindles: 1) Bottom horizontal: 230 mm, 7.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm; (spindle 2 and 3): 15 kW Spindle 3 with electric right/left adjustment 4) Top horizontal: 230 mm, 11 kW 4th spindle with electric up/down adjustment Kodpfxerwmp Uj Affsnf 5) Bottom horizontal: 230 mm, 7.5 kW 6) Universal: 230 mm, 360° adjustable, 11 kW - All spindles adjustable up/down, right/left - All spindles equipped with brake - Spindle diameter: 40 mm - Top infeed: 4 steel, toothed, powered rollers (incl. 2 double rollers) - Top outfeed: 3 smooth, rubber, powered rollers (incl. 2 double rollers) - Bottom outfeed: 2 rubber, powered rollers - Bottom side pressure: 3 units - Variable feed speed adjustment - Pneumatic feed rollers - Feed motor: 3 kW - Electric adjustment of planing thickness - Body lifting motor: 0.37 kW - Infeed table length: 2,480 mm - Enclosed in safety cabin - Centralised table lubrication - Extraction port diameters: 130 mm, 140 mm, 4x125 mm - Dimensions (L/W/H): 4,960 x 1,760 x 1,700 mm - Weight: approx. 3,500 kg ADVANTAGES – Manufactured in Italy – 6-head configuration – Machine is in original paint (not repainted) – All spindles equipped with brake – Last spindle is universal – Used planer, in very good condition Original photos Net price: 54,900 PLN Net price: 13,070 EUR (based on 4.2 EUR exchange rate) (Prices may change due to exchange rate fluctuations)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,6 - 3 Panels thickness (min/max) mm 8 - 60 / Working width (min/max) mm 225 - 3000 Numerical Control Power Control PC 22 /Software: Wood Commander Adjustable feeding speed (m/min ) 15 - 32 Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 / Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + SERVO Band Pressure zone "A" Edge coils supporting unit (No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Knedsp N D Ngepfx Affof Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit 2 x Kw 0,4 Corner Rounding unit (Contour Trimming) FF 12 (4 x Kw 0,4) LEFT SIDE: 2 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 2) 0°-90° RIGHT SIDE: 1 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 1) 0°-90° Profile edge scraping unit PN10 (PNEU) Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Knedpsvz E Drjfx Affjf Weight 280 kg Total power requirement 2,2 kw

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 40 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) Milling Unit (vertical Joint Trimmers) UF 20/S2 (2 x Kw 4) EDGE-BANDING PART (for each side): Glueing Unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA glue/ PU glue) Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL 84 (2 x kW 0,22), speed 25 m/min Kjdouhv R Depfx Affenf Rough Trimming unit BF10 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FK11 (2 x kW 0,4) Profile edge scraping unit (Multi-profile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11. Spraying Unit (for polishing liquid) No. 2 Milling grooving unit SF20 (2 x kW 6,6) Motorised panel infeed roller conveyor, with panel identification system "HOMAG" Mod. POWER TBL 100/20/25

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x740x1000 mm Ksdpfxsvz Expj Affenf Weight 420 kg Total power requirement 4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x740x1000 mm Kodpfxjvz Ewle Affonf Weight 420 kg Total power requirement 4 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Weight 280 kg Total power requirement 2,2 kw Ksdpfx Asvz Eqxjffonf

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x745x1100 mm Knedpfx Ajvz Emyjffof Weight 580 kg Total power requirement 4 kw