Four side moulder

SCM Compact 22

Condition: ready for operation (used), Technical characteristics Capacity : 220 x 120 mm (mini 25 x 6 mm) 2000 mm infeed table Feeding speed 5 to 20 m/min Ppodst N Atvjpfx Ahvjp Table lubrication 4 tool holders : Lower planer : 5.5 HP Right-hand / left-hand spindle moulder : 7.5 HP Upper planer : 5.5 HP Shafts 40 mm bore Max. tool Ø 180 mm Power and Motors Voltage: 400 V Pluging: Three-phased Power: 15 Kw Overall dimensions Lenght: 3500 mm Width: 2000 mm Height: 1500 mm Weight: 1500 Kg

Condition: refurbished (used), Shear machine Weinig brand model U22N, refurbished. 22 cm bench + faced bench 8 Trees with composition: lower, right, left, right, upper, lower, upper, universal Pedpfxex Syrke Ahvjpp Automatic lateral advancement. Very versatile machine, suitable for both long pieces (with side loader) and short pieces (close-tow and grooved bed). Excellent degree of preservation.

Condition: good (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, shaft diameter: 40 mm, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Pedpsyc Nubefx Ahvopp Working width: 260 mm, Working height: 170 mm, 5 spindles, Spindle diameter: 40 mm, Spindle configuration: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion in the table One powered roller in the table at the outfeed. Comes with tooling.

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Ppodeyrrh Nepfx Ahvsp Top 15kW jointer ready Bottom 18.5kw jointer ready Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: good (used), Code: 0288 Brand: SAC Model: F 12 Podpfxeyg Iq No Ahvopp Automatic working center for door and wooden window frames Technical data: Tenoning side : End cutting circular saw - Blade diameter mm 400 Motor power Hp 4 Horizontal positioning with indexing stops N° 2 tenoning spindles each lenght mm 320 Max tools diameter mm 320 Spindle diameter mm 50 Motors power each Hp 10 Max thickness of pieces mm 100 N° 2 suction inlets mm 130 Automatic table with guideline Profiling side: N° 4 profiling spindles each lenght mm 270 - Spindle diameter mm 50 Motors power each Hp 10 N° 4 suction inlets mm 130 Glass bead recovery device - Motor power Hp 3 - Blade diameter mm 200 Exhaust outlet diameter mm 60 Glass bead recovery device - Motor Hp 3 Exhaust outlet diameter mm 100 Adjustable feed speed Return roller conveyor Overall dimensions - tenoning machine : mm 2900 x 2400 x 2200 h Overall dimensions - profiling machine : mm 2900 x 1400 x 1800 h Total weight kg 2900

Condition: ready for operation (used), functionality: fully functional, Kupfermühle KH 30 4-Sided Planer with additional unit: horizontal working spindle with outfeed unit 4-Sided Universal Planing Machine KUPFERMÜHLE Electrical system: 400 Volt / 50 Hz ...../58.5 kW Original paint in reseda green RAL 6011 Motor power and configuration (kW): bottom 7.5 / top 11.0 / vertical right 7.5 / vertical left 11.0 5th spindle (bottom): 11.0 / feed 7.5 / thicknesser 3.0 Feed speed min/max: 5 – 30 m/min Working spindles: 5 units Extraction/Chip collection connectors: bottom 200 / top 200 / right 160 / left 160 mm / bottom 140 mm Pedox Ehfcjpfx Ahvspp Working width min/max: 30 mm / 310 mm Working height min/max (2-sided): 15 mm / 300 mm Working height min/max (4-sided): 15 mm / 180 mm (OPTION: 250 or 300 mm) Key features: – Constant table height – Right-side guide fence – Interchangeable planer heads – Jointing device below and above – Slotted, replaceable tables for noise reduction – Outfeed unit with 2 driven rollers on top and double-guided upper section – Height adjustment synchronized with base machine Machine delivered in refurbished and tested condition, with functional warranty Further options: – New paintwork – Repainting – General overhaul etc. etc.

Condition: used, Year of construction: 1981, Weinig U22N Number of spindles: 7 pcs Planing width: 220 mm Psdpex Da Rbsfx Ahvspp Planing height: 120 mm Infeed table length: 2,500 mm Driven rollers in table: 2 pcs Rollers in table (not driven): 3 pcs Feed motor: 5.5 kW Counter bearing: spindles 6 and 7 Jointer: spindle 6 Spindle configuration Bottom 5.5 kW Right 3 kW Left 5.5 kW Right 7.5 kW Top 5.5 kW Top 4 kW Bottom 4 kW

Condition: good (used), Year of construction: 2003, functionality: fully functional, planing width: 230 mm, working height: 100 mm, Planer Moulder P 1000 UNIMAT STAR with 6 Tool Holders Ppsdpfsxyu Itex Ahvsp

Condition: ready for operation (used), Year of construction: 2003, operating hours: 5,553 h, number of axes: 3, total height: 3,000 mm, total width: 5,000 mm, spindle motor power: 9,000 W, product length (max.): 8,400 mm, spindle speed (max.): 24,000 rpm, This 3-axis Weeke Optimat BHC 550 was manufactured in 2003. It features a spacious table size of 4250 x 1300 mm and a powerful 9 kW main spindle with infinitely variable speeds from 1250 to 24000 rpm. The machine includes an 18-position tool changer and a drilling/milling unit with multiple configurations. If you are looking to get high-quality CNC wood machining capabilities, consider the Weeke Optimat BHC 550 machine we have for sale. Contact us for further details. • Table size: 4250 x 1300 mm Ppjdpfxsyxrdro Ahvep • 8 consoles incl. lifting rail • Dual-circuit vacuum block suction • Vacuum connection for stencil operation • Y-stop rail for top layer overhang • Main spindle: HSK F63, liquid recirculation cooling • Max. tool diameter: 180 mm • Aggregate interface for main spindle, C-axis with torque transmission and 3-point support • Tool changers: 18-position (moving in X), 8-position (moving in Y) • Drilling/sawing/milling unit with ER25 • Drilling/milling unit, manually tiltable 90°, with ER25 • Drilling unit: horizontal in X: 4; horizontal in Y: 2; vertical: 19 • Groove saw in X direction, tool diameter 100 mm • Handheld terminal for machine control with potentiometer • Control/software: Windows XP, WoodWOP 5.0, network connection possible • 2004 new hard drive Additional equipment • Vacuum pump (included)

Condition: good (used), Year of construction: 2011, Weinig Unimat 500 Year of manufacture: 2011 Working width: 230 mm Working height: 120 mm Spindle diameter: 40 mm Infeed table: 2,000 mm Number of rollers in table: 2 powered units, 150 mm wide Feed speed: 5 - 30 m/min Feed motor: 5 kW Memory function 3 radial CNC-controlled adjustments for spindles 3, 5, and 6 Spindle arrangement: Ppodpfxoywiabe Ahvsp Bottom: 7.5 kW Right Left: 7.5 kW Right: 5.5 kW Top: 7.5 kW Top: 7.5 kW Bottom: 11 kW