Used Fermec 960 for sale (1,244)

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Todpfxsvb E Uqj Adnof Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, Hombak trunk milling machine ESR 900/700/960 Root inflow reducer - year of manufacture 1993 - log diameter max 1300 mm Tsdpfx Ast Hf T Hsdnef TECHNICAL PARAMETERS: minimum log length 2000 mm 48 knives main motor 45 kW hydraulic pump motor power 11 kW milling head rotation motor 5.5 kW shaft length (milling / cutting length) 980 mm pressures machine overall dimensions (length / width / height) 550 / 250 / 340 cm weight ~10 t

Condition: used, Year of construction: 1971, pressure capacity max. 80 t Stroke 500 mm table surface area 960 x 810 mm spindle pitch 72 daylight between the columns 950 / 540 mm passage 640 mm machine weight ab. 4500 kg dimensions of the machine ca. 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Flywheel Ø2000mm Tsdpfovxwzkex Adnof 4 prism bases for straightening waves different support frames

Condition: used, Clamping plate, welding table, welding table, straightening plate -Clamping plate: Directional plate with base frame, solid design -Clamping surface: 960 x 955 mm -Table height: 730 mm -Transport dimensions: 960/955/H745 mm Todpfx Adjnzpynjnjf -Weight: 631 kg

Condition: excellent (used), CTS Type: TW -60/9 Temperature test cell water-cooled CTS temperature test cell type TW -60/9 T means: Temperature W means: Walk in Tsdovb Hanspfx Adnsf -60 means: lower temperature -60°C 9 means: 9 m³ test chamber volume Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, environmentally friendly refrigerant R23 / R404 A Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text RS 232 interface Free switching channels for on-site test material control Technical performance data: Temperature tests: Temperature range -60 °C to +100 °C Temperature deviation ± 0.1 to 0.5 K in time Average rate of temperature change with test material and with heat radiation measured in the supply air. Heating: 1.6 K/min from -40 °C to +85 °C Cooling: 1.6 K/min from +85°C to -40°C Test material 420 kg of solar cell modules with100% flow Heat radiation 3000 Watt permanent The technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 9 m³ External dimensions: Width approx. 4140 mm, depth 2680 mm, height 3000 mm Test chamber dimensions: Width approx. 1600 mm depth 2400 mm, height 2200 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, PE, 50 Hz Rated power 48.9 kW Rated current: 74.9 A Protection class IP 54 Cooling water connections Cooling water supply/return R1 ¼"", internal thread Unpressurized condensate drain R1" internal thread Weight: approx. 5609 kg Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2000, condition: used, Trolley, paint drying trolley -Total length: 1400 mm -Total depth: 960 mm Tedsb A Hcmepfx Adnef -Total height: 2000 mm -Compartment height: 28 mm -Payload: max. 15 kg -Number: 2x cars available -Price: per piece -Weight: 127 kg/piece

Condition: used, From € 54,95 now for € 54,95. Now with a 25% discount. A used steel stacking bin on legs with 4 closed and profiled walls is a robust and versatile storage container. This type of stacking bin is often used for storing and transporting parts, materials, tools and other items in various industries, such as manufacturing, logistics and Tjdpfx Adjw Swyqsnjf

Condition: used, STUDER CT 960 is an Internal grinding machine delivering precision, high accuracy and reliable performance. Working capacities: centre height 150 mm, grinding length 150 mm, X/Z travels 400 mm, wheel diameter 250 mm, spindle hole 35 mm; B-axis +61/-91°, rotatable head -5/+275°, turret with 4 spindles. Main specs: spindle speeds 6000 / 45000 / 60000 / 90000 rpm; X/Z feeds 12 m/min; air 6–10 bar; 3x 400 V 50 Hz; total power 34 kVA; weight ~4050 kg; dimensions L 3218 × W 2256 × H 2300 mm. Equipment: coolant system, measuring probe, diamond redresser, spindle cooling, flanges for internal grinding, tool holders, 3-jaw chucks Ø100/125/160, magnetic chuck Ø125/300, tool cabinet, lamp, fire system, electronic handwheel, external grinding spindle 6000 rpm, calibration accessories. Enables tight tolerances; suited to automotive, watchmaking, machine tools, aerospace and medical sectors. Tedpfjxx U Aujx Adnef

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 31927596, available immediately: RENNER Riko 960/270 ST-KT piston compressor with sound box with star-delta starter Technical data: Motor power: 5.5 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 740 l/min Tedpfjxzgilox Adnef Cylinder / Stages: 2/2 Sound level: 69 dB(A) Dimensions L x W x H: 985 x 722 x 802 mm Weight: 206 kg We always have a large selection of new and used compressors in stock! Available immediately.

Condition: good (used), Converter, power supply, switching power supply, DIN rail power supply, servo module, AC/DC power supply, DC power supply, power supply module -Manufacturer: Mean Well, DIN rail switching power supply -Type: SDR-960-48 -Input: 200-240 VAC 6.0 A 50/60 Hz -Output: 48 V / 20 A -Quantity: 1x power supply unit included -Dimensions: 165/110/H130 mm -Weight: 2.3 kg Tedpfsxxt T Ssx Adnsf

Condition: defective spare-parts repository (used), Oxford Instruments X-Strata 960 X-ray Fluorescence Analyzer – For Parts / Defective Item Description: For sale is a used X-ray fluorescence analyzer, model Oxford Instruments X-Strata 960. This device was removed during a laboratory decommission and is being offered exclusively for parts or potential repair. No functionality test has been carried out – the unit is therefore considered defective for the purposes of this sale. Technical Data – Oxford Instruments X-Strata 960 (non-binding) Feature Description Model: X-Strata 960 Manufacturer: Oxford Instruments Analysis Method: X-ray fluorescence analysis (XRF) Applications: Coating thickness measurement, material analysis, precious metal testing Measurement Geometry: Top-down or bottom-up, depending on configuration Radiation Source: X-ray tube (e.g., rhodium anode), 50–100 W output Detector: Proportional counter or silicon drift detector (SDD), depending on version Measurement Range: Coating thickness approx. 0.005 – 50 µm (material-dependent) Spot Size: Approx. 15 μm – 1 mm (depending on collimator) Z-axis: Motorized travel, up to approx. 230 mm measurement height Sample Chamber (W × D × H): Approx. 580 × 510 × 230 mm Sample Table: Manual or motorized (200 × 200 mm or larger, depending on configuration) Focusing System: Optical / laser focus, semi-automatic Operating System: Integrated industrial PC with Windows-based evaluation software Power Supply: 220–240 V / 50–60 Hz / approx. 500–800 W Unit Weight: Approx. 150–200 kg (depending on version) Condition: Used / Defective / For parts Scope of Delivery: As shown in the images – without accessories or software Important Notes: - Sale expressly as a defective device with no guarantee of functionality. - The item is offered for parts or for repair enthusiasts. - No warranty as to function, completeness, or technical specifications. - Commercial sale excluding any liability for defects, in accordance with § 447 BGB (Shipping Purchase). Scope of Delivery: - Oxford Instruments X-Strata 960 - All components visible in the images - No further parts, accessories or documentation included unless explicitly listed. Shipping & Collection: - Collection is possible and preferred in Borken - Shipping available upon arrangement. Tjdpohaapfsfx Adnof (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 4,300 h, load capacity: 6,000 kg, lifting height: 9,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, power: 104 kW (141.40 HP), fork length: 1,200 mm, empty load weight: 11,400 kg, total length: 6,100 mm, drive type: Diesel, construction width: 2,480 mm, Rigid telehandler Load centre: 500 Fork width: 200 mm Fork thickness: 60 mm Mast type: telescopic Transmission: hydrostatic Speed class: 30 Condition: ready for operation and fully functional Tjdpfx Adswzztnjnef Technical condition: normal Front tyres type: pneumatic Front tyres size: 500/70-R24 Front tyres condition: 80 - 100% Rear tyres type: pneumatic Rear tyres size: 500/70-24 Rear tyres condition: 80 - 100% Description: Incl. 4 new tires 3rd valve, air conditioning,

Condition: used, Year of construction: 2015, Technical details: x-travel: 960 mm y-travel: 600 mm z-travel: 480 mm rotary table:: D 350 mm table load: 200 kg spindle turning speed range: 12.000 1/min drive capacity - spindle motor: 14/10 kW control: HEIDENHAIN iTNC 530 rapid traverse: 32 / 32 / 24 m/min Tool changer: 30- fach spindle taper ISO: BT 40 weight of the machine ca.: 7,4 t total power requirement: 45 kVA dimensions of the machine ca.: 3,1 x 2,3 x 3,1 m 5-axis simultaneously universal-machining center, NC-rotary-swivelling table dia. 350mm, A-axis (120/-42°), C-axis 360°, Todpfx Adorm Txbsnof Internal coolant supply, el. handwheel, chipconveyor, direct measuring system, Hour meter: approx. 9.000 h "machine on", approx. 3.500 h "spindle on" *

Condition: used, Year of construction: 1996, pressure 63 t distance between columns 965 mm stroke 4 - 60 mm no. of strokes 30 - 800 Hub/min dayligth (stroke and adjustment up) 380 mm column travel -side 355 mm table surface area 960 x 640 mm hole in the table 850 x 140 mm table height over floor 1150 mm ram surface 960 x 460 mm power requirement 32,5 kW weight of the machine ca. 13,00 t required space 3,3 x 1,7 x 2,9 m ram adjustment 80 mm permitted for automatic mode according to the CE Regulations Todovut Rgepfx Adnef with infinitely variable drive, pneumatic clutch, semi-automatic stroke adjustment, motoric ram adjustment, mechanical pincer feed type GF 160 can be offered without or with putting into operation in given condition

Condition: ready for operation (used), Year of construction: 2004, operating hours: 2,184 h, functionality: fully functional, machine/vehicle number: 2407-463, spindle speed (max.): 60,000 rpm, number of spindles: 3, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 15 °, TECHNICAL DETAILS Grinding spindle speeds Spindle 1: 60,000 rpm Spindle 2: 60,000 rpm Spindle 3: 45,000 rpm B-axis swivel range: -90°/+15° MACHINE DETAILS Spindle hours Spindle 1: 11,278 h Spindle 2: 2,184 h Spindle 3: 2,841 h Main counter: 45,144 h Todpfx Aextdfbednof EQUIPMENT Touch probe (on 4th spindle position)

Condition: good (used), Code: 0205 Brand: MAGGI Model: BEST 960 - CE Standard Radial saw for cutting wooden elements, laminated beams, wooden roofs, packaging, wooden structures, plastics, composite materials and various - CE Standard Technical data: Max blade diameter mm 550 F22 Motor power Hp 7,5 - Rvm 2800 Cutting capacity length mm 850 Max cutting height mm 180 Todpfxsxc In Eo Adnof Work surface mm 1300 x 1150 Suction mouth diameter mm 60 Overall dimensions mm 1300 x 1500 x 1650 h

Condition: used, Year of construction: 2003, * Year of manufacture: 2003 * Weight: 1,150 kg Tedpfxowc Ifms Adnof * Type: Dücker H 960 ---Internal vehicle number: 10780----Subject to errors and prior sale.

Condition: like new (used), Year of construction: 2010, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Specification: Weinig Rondamat 960 Powerlock / HSK profile grinder. High-precision knife grinder for grinding straight knives and profiling using a template. Grinding straight knives in a knife block. Hand-held grinder for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazon 10 mm Grinding wheel bore: 60 mm Turning circle min./max.: 100 mm / 300 mm Tool width max.: 360 mm Grinding wheel drive: 1.1 kW Spindle speed: 1700 / 2000 / 2400 / 3000 rpm Relief angle: Radial: (back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 liters Table travel 0 - 360 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Complete documentation. Todpfx Adsxlk Nqonjf

Year of construction: 2025, condition: new, functionality: fully functional, stainless steel construction for 2 Euro-Palettes with a loadinghight of 1500mm max 80 crates with 400 x300 x300mm L x B x H dimensions: widht: 2450mm height 2678mm lenght: 2050mm chamber dimensions widht: 2066 mm height: 1795 mm lenght: 1340 mm Thickness of Insulation 40mm Electronic Regulation of Pasteurizationprocess: Adjustment of heatingspeed (depends also on capacity of the steamboiler) Adjustment of pasteurizationtemperature Adjustment of required holdingtime on Pasteurizationtemperature Tjdpfx Aeclq Ixjdnef Adjustment of switch-off temperature electronic Datalogger for Pasteurizationtemperature and Chambertemperature Aircirculation by High effective Stainless Steel Airblower Steaminjection in the Airchannel for opimized steammixing pneumatically actuated Steamvalve Kondensateoutlet on the bottom of the Chamber DN 100 4 pcs. adjustable Feets Steamconsumption: approx.:. 80 kg / H at 1 bar electric power consumption: 5,5kW weight: approx. 650 kg

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 Powerlock (Automatic straight knife grinder and profile grinder) Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification as follows Weinig Rondamat 960 Powerlock / HSK profile grinder. High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. POWER LOCK SYSTEM option For grinding powerlock tools. Tool holder with manual HSK quick clamping system. Tsdpfx Adsxgrp Ujnef Radial table clamping with fine adjustment Max tool width 240mm Max COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Print format: 600 mm x 900 mm Max. sheet format: 650 mm x 950 mm Max. screen frame format: 700 mm x 2160 mm x 40 mm Table size: 700 mm x 1000 mm Cycle rate: 1200 pieces per hour Tjdpfedx Raqjx Adnjf Machine dimensions (L x W x H): 1600 mm x 1080 mm x 1700 mm Squeegee and presqueegee adjustment: 40 mm Infinitely adjustable squeegee angle: +/- 10° Adjustable snap-off: 0 - 40 mm, stepless Main frame fine adjustment: +/- 15 mm Max. material thickness: 0 - 40 mm Machine weight: 600 kg Connected load: 400 Volt / 50 Hz - 3 kW Air connection: 6 bar

Condition: used, Maggi Best 960 IDC000099 Todsu Dh Hlepfx Adnef

Condition: like new (used), Motor power: 3 kW Tjdpfx Adjxcwgdsnef Table dimensions: 2000 × 770 mm Cutting angle adjustment: 3 positions Year of manufacture: 2009 Maximum cutting height: 125 mm Maximum cutting width: 865 mm Power supply: 400 V

Condition: refurbished (used), Year of construction: 2005, 1.) Pallet production line "Delta" 2.) Year of manufacture: 2005 3.) Year of repair and modification: 2024 4.) Condition: Excellent 5.) Capacity: 960 europallets/8h (Possibilities of production of various types of pallets) 6.) Power: 42KW 7.) Modifications: Complete new wiring with new "Schneider" PLC and new control program. New hydraulic pump and oil etc. 8.) Description: a) HYDRAULIC NAILER b) STAMP BURNER c) CORNER CUTTER d) PALLET TURNER (2 pallet stacking options: pallet in pallet or pallet on pallet) e) PALLET STACKER Tsdovzw Hfspfx Adnef 9.) Upon agreement, the possibility of disassembling and assembling the machine at the customer's place. Possibility of agreement on maintenance and servicing of the machine. LOCATION - CROATIA ADDITIONALLY FOR SALE: Complete Croatian company with EPAL license, Cube sawing machine, "Toyota" gas forklift, complete equipment for a 40m3 wood drying chamber, multi-blade circular saw for longitudinal cutting of wooden elements, "Brugger" gasoline sawmill up to 70cm diameter, machine for cutting edges at 45 degrees, "ABAC B7000/10/500 FT10" piston compressor (7,5KW, 2023 year), air intake: 1210 l/min, "Posch" machine for sawing and splitting firewood.

Condition: ready for operation (used), An Intralox belt, buffer table and Stöber conveyor belt are available. Belt width: approx. 1150mm, belt length: approx. 4900mm, frame material: stainless steel. Including 4 belts. Documentation available. Tedpfjwihywox Adnef