Used Maho for sale (436)

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, Note: Error in the magnetic linear measuring system of the X-axis TECHNICAL DETAILS Number of axes: 3 Travel range of X-axis: 2,500 mm Travel range of Y-axis: 920 mm Travel range of Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Itjdpjzu Nyaefx Abnek Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Transport packages: 3 EQUIPMENT External cooling Chip conveyor Tool magazine (30 pieces)

Condition: used, Year of construction: 2010, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 500 kg, spindle speed (max.): 12,000 rpm, Equipment: chip conveyor, Tool changer with 60 positions Spindle speed 12,000 rpm Heidenhain iTNC 530 control unit Internal coolant supply (ICS) Chip conveyor 3D quickset Iedszva Uwepfx Abnetk

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 29130000062, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, feed length X-axis: 90,000 mm, feed length Y-axis: 90,000 mm, feed length Z-axis: 90,000 mm, nominal power (apparent): 73 kVA, controller manufacturer: HEIDENHAIN, controller model: ITNC 530, total height: 2,600 mm, total length: 4,000 mm, total width: 3,500 mm, table width: 650 mm, table length: 950 mm, overall weight: 10,000 kg, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, input voltage: 400 V, input current: 125 A, DECKEL MAHO DMC 75 V LINEAR CNC Vertical Machining Center - Frequency: 50/60 Hz - Tool holder: HSK 63 - Table with six slots and a GARANT zero-point clamping plate, plate dimensions: 360 x 360 mm - Including 3D measuring probe - Including chip conveyor Note: The machine can be transported on a truck up to 3000 mm wide! Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. Iedpszld Nqsfx Abnetk FCA D-63128 Dietzenbach - loaded onto a truck.

Condition: good (used), Year of construction: 1996, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Travel distances: X= 600, Y= 400, Z= 400 mm Table size: 900 x 480 mm Spindle speed: 40 - 4,000 rpm Dimensions LxWxH: 2500 x 2200 x 2200 mm Iedpey Eyfwofx Abnjtk Weight: approx. 3,000 kg

Condition: ready for operation (used), Year of construction: 2000, operating hours: 32,000 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 430, overall weight: 4,900 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 13,000 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2000. It features a travel range of 1000 mm in the X-axis, 600 mm in the Y-axis, and 600 mm in the Z-axis. The machine includes a vertical tool changer with 24 stations and a maximum permissible load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 103 V vertical machining centre we have for sale. Contact us for further details. Ijdpfx Abozu Nygonjtk - Rapid Traverse (X/Y/Z): 30 m/min- Max. Permissible Load: 800 kg- Tool Changer: Vertical tool changer with 24 stations- Machine Weight: approx. 4,900 kg- Main Drive: Speed-controlled asynchronous motor 9/13 kW- Electrical Specifications: 400 V, 3+PE~, 50/60 Hz, 50 A, 30 kVA, Control voltage 230 V / 24 V=- Operating Hours: approx. 32,000 operational hours (cabinet counter reads 054888 h)- Included / Additional Equipment: Chip conveyor, dividing head with counterholder (4th axis, currently disconnected)- Operational Condition: Configured for 4 axes; 4th axis power unit failed/disconnected; operated as 3-axis machine until end of 2021; out of service and available immediately

Condition: ready for operation (used), Year of construction: 2001, operating hours: 29,173 h, functionality: fully functional, machine/vehicle number: 11045522744, travel distance X-axis: 500 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 380 mm, controller model: HEIDENHAIN MILLPLUS, spindle speed (max.): 18,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item promptly between October 7, 2026, and October 14, 2026! TECHNICAL DETAILS Travel range X-axis: 500 mm Travel range Y-axis: 420 mm Travel range Z-axis: 380 mm Rapid traverse rate X-axis: 50 m/min Rapid traverse rate Y-axis: 50 m/min Rapid traverse rate Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min Spindle speed: 18,000 rpm Torque: 1,100 Nm Iedpfjzu Ixnsx Abnjtk Tool holder: SK 40 Holder diameter: 40 mm Number of tool positions: 32 Max. tool length from spindle nose: 280 mm Max. tool weight with automatic tool changer: 6 kg Max. total weight of tools in magazine: 90 kg Table length: 500 mm Table width: 380 mm Max. workpiece weight: 330 kg Clamping area: 500 × 380 mm Distance between T-slots: 63 mm T-slot width: 4 H7 Centering bore diameter: 30 H6 Max. table rotation speed: 33 rpm Max. swivel torque: 1,400 Nm Swivel speed: 26 rpm Linear scale resolution X/Y/Z: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control system: HEIDENHAIN MILLPLUS Rated apparent power: 40 kVA Input voltage: 400 V Input frequency: 50 Hz Input current: 80 A Dimensions and weight Dimensions (L x W x H): 3,500 x 2,400 x 2,500 mm Total weight: 7,000 kg Operating hours Counter 1: 80,842 h Counter 2: 29,173 h EQUIPMENT NC rotary table with swivel axis

Condition: used, Year of construction: 1986, Deckel Maho 800E, manufactured in 1986: - Table surface area: 600 x 1100 mm - Travel in x-axis: 800 mm - Travel in y-axis: 450 mm - Travel in z-axis: 500 mm Isdpfx Absza Am Ejnstk - Footprint: 3000 x 2500 x 2030 mm - Weight: approx. 4000 kg

Condition: good (used), SUMMER SALE – UNBEATABLE PRICE: €9,900 Please read the technical specifications carefully. If the machine is a worthwhile investment for you, please provide your full details, including a valid telephone number and email address, so that we can prepare a quotation. DECKEL Milling Machine, Tool Milling Machine DMU 35 M 3 x 2-axis CNC milling machine With SIEMENS 810 D – ShopMill software (Buffer batteries renewed) Operating hours: 13,020 hours Spindle hours: 1,561 hours Year of manufacture: 2003 Travel distances: X/Y/Z: 350 x 240 x 340 mm Spindle speed, continuously variable: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Itodpfxoxz Rdae Abnek Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: 55/80 Nm max. Universal swivel/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145/485 mm Feeds: 3,000 mm/min Rapid traverse: 5,000 mm/min Input increment: 0.01 mm Rotational range: 360 degrees Swivel range: degrees Total power requirement: kVA Weight: approx. 1,750 kg Technical data is non-binding! Accessories/Equipment: Direct linear scale for 3 axes Spindle drive via servomotor with toothed belt 2 gear stages Full-protection enclosure with sliding door Swiveling control panel Coolant nozzles on the vertical head Coolant system Chip tray with coolant tank Electric handwheel Machine feet Machine light Serial RS232C, LAN (RJ45) interface The machine is ideal for prototype construction, toolmaking, training, mechanical workshops, and weapons manufacturers, etc. It is characterized by its versatility, with the additional manually operated rotary/swivel table, which allows for 5-sided machining. Condition: good to very good, from a vocational training center; see pictures. Can be tested under power.

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 6,300 rpm, travel distance X-axis: 350 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 340 mm, number of axes: 3, This 3-axis DECKEL MAHO DMU 35M was manufactured in 2000. It features a Siemens control unit and operates at an apparent power of 15 kVA. The machine is designed for versatility in machining applications. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMU 35M universal machining centre we have for sale. Contact us for further details. Itedpfxozuxyco Abnok - Control Unit: Siemens- Apparent Power: 15 kVA- Voltage: 400 V / 230 V / 24 V- Frequency: 50 Hz- Max Current: 25 A- Fuse Rating: 35 A

Condition: excellent (used), Year of construction: 2003, Deckel Maho DMU100T (Monoblock) 5-axis machine Year of manufacture: 2003 Information: New main spindle installed in December 2025 Control system: - Heidenain iTNC530 Travel ranges: - X - 1060 - Y - 710 - Z - 710 Table: - Clamping area 1500 x 800 mm - Table load max. 2000 kg - Rotary table 360° Swivel head: - NC swivel milling head Tool changer: - 32 magazine positions Itedszuprcspfx Abnok Coolant: - Internal coolant system (IKZ) - Strip filter system

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Universal milling machine DMG FP4M Special Edition With 3-axis digital display ND7013 by Heidenhain, in new condition, Made in Germany, CE compliant!!! Technical data: >> Year of construction 2022 >> Fixed angular table, clamping area 480x800 mm >> Spindle drive, speed range 25-3000 rpm, stepless adjustment with input on the control panel >> Controlled main drive 6 kW >> Vertical milling head, swiveling +- 90 degrees (180 degrees) >> Linear axes, feed range 6-500 mm/min >> Rapid traverse 1500 mm/min >> Space requirement (W+D) approx. 2.2 x 1.9 meters >> Weight approx. 1600 kg Accessories and equipment: >> Heidenhain digital display ND 7013 >> Coolant system >> Minimum quantity lubrication >> Central lubrication >> Machine feet Isdpfezung Eex Abnjtk >> Operating manual, etc. About the machine: Offered is a universal milling machine DMG FP4M Special Edition with a 3-axis digital display by Heidenhain ND 7013, in new condition. A reliable and user-friendly machine, Made in Germany. An oil change has been performed. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered on.

Condition: used, Year of construction: 2003, x-travel 780 mm y-travel 560 mm z-travel 560 mm tool taper SK40 control HEIDENHAIN iTNC 530 weight of the machine ca. ca.12,5 t required space 3,40 x 3,30 x 2,60 m DECKEL MAHO DMC 60T BJ 2003 Operating hours: 32532.7 The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to powerful motor spindles, high feed rates, and a flexible tool magazine. All technical details can be found below. Working range Travel distance/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Worktables NC rotary table – clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 deep mm Locating bore: diameter 20^H6 20 deep mm Torque of the table at: – 100% duty cycle: 1603Nm – 25% duty cycle: 2813Nm Max. rotation of the table: 30 rpm Feed: 7200 ./min. Permissible table load: 400 kg Tool magazine with magazine SK 40 Feed drive AC servo motors in digital technology for axis X, Y, Z Feed speed X-, Y-, Z-axis infinitely programmable: 20–15000 mm/min. Rapid traverse X-, Y-, Z-axis: 50 mm/min. Setup operation X-, Y-, Z-axis: 20–2000 mm/min Measuring system Resolution | X-, Y-, Z-axis: 0.001mm Input unit | X-, Y-, Z-axis: 0.001mm Position tolerance | X-, Y-, Z-axis: 0.010mm Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Spindle main speed: 18000min^-1 Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Main drive 24000 min^-1: motor spindle without gearbox Speed Infinitely programmable: 20–24000 min^-1 Itjdpfx Abowm Rrwonsk In setup mode: 20–800 min^-1 Weight Machine with tool changer and transport base: approx. 10100kg Installation weight Machine with fixed table and tool changer: max. 11500kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system 900l: 2.22 x 1.40 x 2.20 m

Condition: excellent (used), Year of construction: 2006, • Configuration: 3 linear axes (X/Y/Z) + B-axis tilting head • Travels (X/Y/Z): 2,500 / 920 / 820 mm • Table: 3.100 × 900 mm · max load 3.000 kg • Spindle: 20–18.000 rpm · HSK-A63 · 35/25 kW • Rapids: X 100 m/min · Y/Z 60 m/min • Tool magazine: 120 tools • Control: HEIDENHAIN iTNC 530 Itedey Skmropfx Abnsk

Condition: good (used), Year of construction: 2010, operating hours: 43,982 h, functionality: fully functional, travel distance X-axis: 1,150 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,700 mm, total length: 3,500 mm, total width: 3,000 mm, table load: 800 kg, rotational speed (max.): 18,000 rpm, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,992 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Note: We offer flexible financing solutions for all machines, as well as a professional relocation service. Disassembly, transport, and professional reassembly – all from a single source. Billing is based on individual terms and conditions and duration. Contact us for your personal offer. Iodpozudpiofx Abnjtk

Condition: good (used), Year of construction: 2006, A very fast, continuous 5-axis milling machine. Designed primarily for smaller, complex parts requiring extensive machining. This machine enables continuous 5-axis milling with high repeatability. It delivers tireless performance thanks to its linear motor and glass scale measuring system, which ensure strict tolerances. Including: High-pressure coolant up to 40 bar Programmable B-axis and C-axis Heidenhain 3D touch probe Tool measurement X axis 500 mm Y axis 450 mm Z axis 400 mm Spindle speed 18000 rpm Tool capacity 60 CNC Control Heidenhain TNC530i Tool changer/magazine SK40 Viewing in operation is possible upon appointment. Availability: 10/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Itjdpfx Aozvfn Aobnok

Condition: like new (used), functionality: fully functional, From a warehouse liquidation: Original Maho replacement parts for the DMP60/45Vlinear tool changer cover. A collection of grippers, levers of various development stages, cams, jaws, toothed parts, hydraulic rotary drives, magazine guides, etc. Itjdpfx Ajzvff Uebnjk

Condition: excellent (used), Year of construction: 2005, operating hours: 62,289 h, functionality: fully functional, machine/vehicle number: 15035709574, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, feed rate X-axis: 18,000 m/min, nominal power (apparent): 55 kVA, controller manufacturer: Heidenhain/Mill Plus, controller model: Heidenhain/Mill Plus, workpiece length (max.): 600 mm, workpiece width (max.): 400 mm, workpiece height (max.): 520 mm, workpiece weight (max.): 600 kg, total height: 2,900 mm, total length: 2,900 mm, total width: 2,650 mm, table width: 500 mm, table length: 700 mm, table load: 600 kg, overall weight: 7,400 kg, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, spindle motor power: 20,000 W, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, 5-axis CNC machining center Deckel Maho DMU 70 Evolution Control system: Heidenhain / Mill Plus Tool magazine: 60 tools Year of manufacture: 2005 Country of origin: Germany Machine parameters: - Axis X travel: 750 mm, Axis Y travel: 600 mm, Axis Z travel: 500 mm - Axis B: 180 degrees - Axis C: +/- 360 degrees - Feed rate range: 18,000 mm/min - Rapid traverse rate: 50 m/min - Max spindle motor power: 20 kW - Tool holder: SK 40 - Work table dimensions: 700x500 mm - Work table load capacity: 600 kg - Chip conveyor - Coolant system Iodpfx Aezvdb Isbnjtk - Complete programming manual - Technical documentation - Machine weight: approx. 7.4 tons - Machine dimensions: approx. 2,900 x 2,650 x 2,900 mm The electrospindle was replaced in 2023.

Condition: excellent (used), functionality: fully functional, Measuring machine based on Zoller V520, including a fixture for pre-setting and measuring the grippers of the DMP60VLinear tool changer. It features 2 linear axes and 2 rotary axes and is supplied complete with a PC and Zoller Multivision II. The digital display for the two rotary axes is not included in the scope of supply and can be purchased separately. Itedpfx Abezvdbbenjk

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, Milling machine Maho MH 500 W with Heidenhain 232 control system. Fixed table, SK 40 spindle mount with hydraulic collet chuck. The machine has been idle for some time and is sold as is, without testing. Iodpfx Abszvblksnotk

Condition: not inspected (used), Year of construction: 1990, functionality: unexamined, Milling machine Maho MH 500 E2 with Phillips CNC 432 control system. Fixed table, SK 40 spindle mount with hydraulic clamping. 16-position vertical tool changer. The machine has been standing idle for some time and has not been tested. It is being sold as defective. Isdpfx Aszvbkmjbnotk

Condition: ready for operation (used), Year of construction: 2003, operating hours: 6,276 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis DMG DECKEL MAHO DMC 63 V was manufactured in 2003. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a Siemens 840D control unit and has a spindle speed of 10,000 rpm. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 63 V vertical machining centre we have for sale. Contact us for further details. - Total Power On: 24,787 h- Spindle / Cutting Time: 6,276 h- Apparent Power: 30 kVA- Max Current (Jn max): 50 A- Rated Current: 45 A- Voltage: 400 V / 230 V / 24 V- Frequency: 50/60 Hz Iodpszt N Sasfx Abnjtk Technical Specification Taper Size SK 40

Condition: used, Year of construction: 1988, x-travel 0600 mm y-travel 450 mm z-travel 450 mm quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 feeds - automatic programming 1 - 4000 mm/min Isdpfeu Rt I Iox Abnjtk rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller model: SIEMENS SINUMERIK 840D pl, rotational speed (min.): 8,000 rpm, overall weight: 4,000 kg, number of slots in tool magazine: 20, The machine is still connected to the power supply and is located near Düsseldorf. The vises shown in the images are not included in the offer. Itedpfx Abjzuxiqonok All technical specifications are provided to the best of our knowledge, but without guarantee. Subject to prior sale and errors.

Condition: used, X-axis: 640mm, Y-axis: 600mm, Z-axis: 500mm, feed force (40% duty cycle) X-, Y-, Z-axis: 7000N, max. feed speed X-, Y-, Z-axis: 40m/min, rapid traverse speed Y-, Z-axis: 40m/min, rapid traverse speed X-axis: 70m/min, ball screw diameter/pitch Y-, Z-axis: 40/15mm, number of magazine pockets: 30, position coding: fixed-position coding, max. tool loading weight: 90kg, max. diameter of standard tools: 100mm, max. diameter of special tools with adjacent positions free: 140mm, max. tool length: 300mm, max. tool weight: 6kg, table clamping surface: 850x600mm, T-slots: DIN 650-14, loading height (top edge of table): 850mm, max. load: 600kg, connected load: 39kVA, control: Heidenhain iTNC 530, length: 2500mm, width: 4100mm, height: 3000mm, weight: 7,74t, operating hours: 60.366h. With documentation. Iodpjzuwxqjfx Abnetk

Condition: excellent (used), Year of construction: 2014, operating hours: 16,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: TNC 530 HSC, overall weight: 10,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 3,000 h, coolant supply: 40 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, 5-axis universal machining center DMG Deckel Maho DMU 60 EVO Year of manufacture: 2014 Control system: Heidenhain TNC 530 HSC Operating hours: 16,000 h Spindle hours: approx. 3,000 h – spindle was replaced in 2025 Technical data: Spindle speed: 10 - 18,000 rpm Drive power: Spindle torque: Tool holder: HSK 63 Number of magazine positions: 60 Coolant through-spindle – internal coolant system: 40 bar Travel ranges: X-axis: 600 mm Y-axis: 500 mm Itjdpfx Abszut Inonjk Z-axis: 500 mm A-axis: -10 / +110° B-axis: 0.001° Accessories: - Knoll coolant system 40 bar with paper band filter - Spindle oil cooler - Chip conveyor - 3D probe - Blum laser