Used Dry Tunnel for sale (3,273)

Year of construction: 2019, operating hours: 1,400 h, condition: used, functionality: fully functional, For sale is a used tunnel oven from 2019. This oven runs on electricity. Manufacturer: Southstar, China. Total length (external) including entry section: approx. 8,890 mm Entry length: 850 mm The exit is flush with the oven body. External width: approx. 2,005 mm External height: approx. 1,300 mm Distance between the heating plates and heating elements: approx. 120 mm Rbsdpfxoyvqt Hs Ab Iow Entry height between heating plates: approx. 135 mm Height from the floor to the top edge of the control panel: approx. 2,065 mm Length of heating plates: approx. 1,015 mm Width of individual heating plates: approx. 96 mm Length of heating plates between the M10 screw heads: 965 mm The motor and gearbox are mounted on top to avoid heat exposure. Unused spare parts, including a motor, gearbox, as well as heating plates and heating elements, are included. This oven was in use for only about 9 months. It consists of 3 zones; top and bottom heat can be controlled separately in each zone. Previously used for pizza production but is suitable for other products as well. The oven served as a backup unit, so this is not a distress sale, but price negotiations are possible. Viewing and test runs can be arranged on site in 32052 Herford. Collection only from Herford. No guarantee or warranty.

Condition: ready for operation (used), Memmert SFE 600 heating furnace max. 70°C For further technical data see pictures. You are welcome to come by for an inspection. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Rbsdsip Um Aopfx Ab Iow Deviations from technical data and errors in the description of the article can happen and remain reserved.

Condition: ready for operation (used), Heraeus UT 6060 heating furnace no. 415 max. 300°C Dimensions: Outside: 750mm x 730mm x 580mm ( L x W x H ) Inside: 400mm x 350mm x 380mm ( L x W x H ) For more technical data, see pictures. You are welcome to visit for inspection. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Rjdpfjlt Ut Rex Ab Iebw Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data as well as errors in the description of the article can happen and remain reserved.

Condition: used, Year of construction: 2013, operating hours: 9,915 h, Equipment: all wheel drive, Internal vehicle number: G300449 German vehicle, good condition, ready for operation Available immediately at our yard in Kaufungen - Kassel, Germany More INFO from Luis Lucena Liebherr R944C T Year of manufacture: 2013 9,900 operating hours 43.2 tons Width: 3,050 mm Financing example: * Internal number: G300449 * Purchase price: €49,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €781.55 * Final payment: €9,380.00 If you are interested in this offer or wish to tailor it to your requirements, please contact Mr. Enchev. We look forward to your call. Errors excepted. Rbodpfxoyvm Ako Ab Isw We are happy to accept your used vehicle as trade-in. Financing available directly in-house. GOLEC NUTZFAHRZEUGE GMBH We speak German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: used, functionality: limited functionality, power: 168 kW (228.42 HP), gearing type: automatic, fuel type: diesel, color: yellow, empty load weight: 20,650 kg, maximum load weight: 6,000 kg, Year of construction: 2023, Operation: Radio remote control Fire suppression system: Ansul Width: 2,335 mm Rjdpfx Aeytcy Ejb Iobw Height with bucket raised: 4,400 mm Length, standard machine: 8,945 mm Height with bucket lowered: 2,235 mm Engine power: 168 kW / 225 HP Engine: Cummins B6.7, EPA Tier 4F/EU Stage V Tipping force, mechanical: 12,500 kg Breakout force, hydraulic: 13,400 kg Handling capacity, standard bucket: 6,000 kg Operating weight (empty): 20,650 kg Axle load front/rear: 8,910 / 11,750 kg

Condition: used, Drying machine HENRI PETIT JEAN Eco 600A Rjdpfx Abjyvk Sco Ijbw

Condition: used, axle configuration: 3 axles, first registration: 10/2012, loading space length: 13,620 mm, loading space width: 2,470 mm, loading space height: 2,910 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435 / 50 / R19.5, wheelbase: 8,940 mm, color: white, Year of construction: 2012, General information Model code: ## Axle configuration Tyre size: 435 / 50 / R19.5 Make axles: BPW EcoPlus Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 25%; Tyre profile right: 25% Weights Empty weight: 7.550 kg Carrying capacity: 33.450 kg Rsdpsyvf A Ujfx Ab Iebw GVW: 41.000 kg History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, No. 3245 Commissioning trolley / paint drying trolley Reinhold Beck Maschinenbau Trapez Used, good condition A total of 16 units available For space-saving storage until further processing For lacquered panels, strips or profiles Shelf width 500 - 2000 mm Shelf depth 510 mm 15 shelves, lined with rubber or foam Distance between shelves approx. 78 mm Load capacity per shelf 40 kg (600 kg in total) Mobile, some with brakes Castors in various designs Transport dimensions approx. 800 x 700 x 1850 mm LWH Weight approx. 90 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Redpfx Absxpilxe Iebw Terms of delivery: ex location

Condition: good (used), functionality: fully functional, overall weight: 200 kg, Labotek dryer Redpfxovrubno Ab Isbw Type: DDM 60 ALB Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW

Condition: good (used), functionality: fully functional, Labotek dryer Type: DDM 120 ALB Power: 8.9 kW Redpfx Abovtxmwe Isbw Labotek CON-EVATOR material conveyor Type: PGT 4/DDM Power: 0.5 kW

Year of construction: 1997, condition: good (used), functionality: fully functional, MOTAN dry air dryer Model MDE 40 Power 1.3 kW MOTAN granulate container Model BE 60 Ltr. Additional heater Power 1.55 kW MOTAN material conveying unit Model HLS-02-1-A-000-0 Redpfxsxr Acvs Ab Ijbw This system has been tested for all functions and operates flawlessly!

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 00 06 028/00 0026 S, Dry air dryer with material conveying devices Manufacturer: Motan Type: Luxor LA/8-200 Connected load: 6 kW Dry air volume: 200 m3/h Rbjdpsyvfkrofx Ab Iew With vacuum pump VACOM Type: VC 340-720 Power: 4.6 kW With central filter and Motan control system

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 4608 1999, power: 5.6 kW (7.61 HP), volume flow: 200 m³/h, Dry air dryer with material conveying units Manufacturer: Motan Model: ADC 200/10/20 Connected load: 5.6 kW Dry air capacity: 200 m3/h With vacuum pump VACOM Model: VC 340-720 Power: 4.6 kW With central filter and Motan control system Rbedpeyvfibofx Ab Ijw

Condition: used, Year of construction: 2021, machine/vehicle number: 70602008, High-performance industrial vacuum evaporator designed for the treatment and volume reduction of industrial wastewater and process liquids. This system uses heat pump technology combined with vacuum evaporation to achieve efficient distillation at low temperatures. Rbodeyu Sfaopfx Ab Iew Technical Specifications:Capacity (distillate production): approx. 12,000 – 12,700 L / 24 h Technology: Heat pump vacuum evaporation Operating mode: Fully automatic continuous operation with PLC control (Siemens) Refrigerant: R134a Installed power: approx. 114 kW Operating temperature: 35 – 45 °C Distillate temperature: 37 – 47 °C Concentrate temperature: 35 – 45 °C Operating pressure: 6 – 8 kPa (vacuum) Dimensions and Weight Total length: approx. 5600 mm Total width: approx. 1500 mm Total height: approx. 3800 mm Weight: approx. 4,000 – 5,000 kg Condition: Used – very low operating hours. EVALED AC R 6 (vacuum evaporator / crystallizer “R” scraped type) is about 6 t/day class. Veolia EVALED AC R6 FF3 Vacuum Evaporator / Crystallizer – Wastewater Treatment

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Rbsdpfx Abjfzb Nbe Ijw Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 Rodpfx Aofzb Nieb Iebw ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Rbsdpsyg H Dzsfx Ab Iew 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: used, Year of construction: 2022, load capacity: 250 kg, fuel type: electric, power: 11 kW (14.96 HP), We offer this used Jumbo smart dry pelletizer, year of manufacture 2022. Electric drive: 2 × 5.5 kW Gearbox speed: 32 rpm Throughput: 100–250 kg Rodpfx Aeyuyt Sjb Isbw Noise emission: 73 dB(A) Control system: Siemens SPS S7 1500 The pelletizer has only been in operation for a few hours. It was used for the pelletizing of sewage sludge. Feedstuffs or similar materials can most likely also be processed. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1991, machine/vehicle number: 2391, Offer 25398 Redeygk A Iepfx Ab Iebw Technical Data: - Temperature continuously adjustable up to 300 °C - Power supply: 220 V - Usable internal chamber: 300 x H 530 mm - Space requirement: approx. 700 x H 750 mm - Weight: approx. 25 kg

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 07765, We offer this used Tonello 0/10 drying and curing oven, year of manufacture 2018. Manufacturer: Tonello Rodpfxjyuuy Te Ab Iebw Model: 0/10 Year of manufacture: 2018 Condition: used Category ID: 2062 Type ID: 1018 Type: Drying and curing oven If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2019, operating hours: 5,300 h, functionality: fully functional, overall weight: 345 kg, type of input current: three-phase, Equipment: documentation/manual, This machine has been fully overhauled by ASCO. The machine is ready for immediate operation. The service report is included. Extruder plate 3mm Redpfsyh I S Tjx Ab Iebw Extruder plate 16mm Other sizes available on request. Worldwide shipping. ASCO Pelletizer A120P-D3, ASCO dry ice pelletizer, dry ice pelletizer for sale, dry ice pelletizer for sale, dry ice pellet machine for sale, dry ice production machine, dry ice pellet making machine, dry ice pellets 3mm, dry ice pellets 6mm, dry ice pellets 10mm, dry ice pellets 16mm, industrial dry ice production, cryogenic pelletizer, CO2 pelletizer machine, dry ice extruder, high quality dry ice pellets, ASCO pelletizer 120P, ASCO pelletizer A120P, ASCO A120P D3 pelletizer, dry ice pelletizer Netherlands, dry ice production machine, second-hand dry ice pelletizer, used dry ice pelletizer, refurbished dry ice pelletizer, industrial dry ice equipment, CO2 pellet machine, dry ice machining, pelletizing dry ice, ASCO CO2 pellet machine, pelletizer 120 kg/h, dry ice pellet production system, dry ice supply equipment, cryogenic pellet production, liquid CO2 pelletizer, PLC controlled pelletizer, automatic dry ice pellet machine, pelletizer Noordwijkerhout, DrDryice, export dry ice pelletizer, industrial dry ice supply, dry ice storage and production. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: new, Year of construction: 2025, functionality: fully functional, Equipment: documentation/manual, TRIVENTEK BL60 Includes nozzle case. Rodpjyfwb Uofx Ab Ijbw For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. Repairs and maintenance for Cold Jet machines. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, in-situ mold cleaning, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blaster Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: new, Year of construction: 2025, operating hours: 4 h, functionality: fully functional, machine/vehicle number: 07-262-01, Equipment: documentation/manual, New Asco Jet 1701 Includes nozzle case. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We offer repairs and maintenance for Cold Jet machines. We also supply new machines. Contact us for more information. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blaster, dry ice blaster for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice. Rbjdjyfmcbepfx Ab Isw

Condition: like new (used), Year of construction: 2018, operating hours: 47 h, functionality: fully functional, i3 Microclean UPGRADE DX PELLET SANDERS (€2000) This machine allows you to use loose 3mm pellets as well! And of course, blocks. As good as new, 1-year warranty Includes hoses and nozzle. The COLD JET machine is suitable for industrial cleaning, for both small and very large projects. The benefit of this machine is that it isn’t equipped with new-generation electronics. It’s one of the most aggressive cleaning machines on the market. The unit is in excellent condition. Cold Jet i3 Microclean & Dry Ice Press. Complete blasting set including the following equipment: COLD JET i3 Microclean (47 hours of use) 1 x 20' blast hose 1 x Cold Jet applicator 1 x nozzle Rodpoydpy Tjfx Ab Iebw One of the best machines in the world. No electronics. That’s why it’s reliable. Very low maintenance costs. For questions or to schedule a viewing, please contact DrDryice. All machines are supplied with a 1-year warranty. Repairs and maintenance services available for Cold Jet equipment. We also supply new Cold Jet machines. Please contact us. Worldwide shipping possible. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blaster, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blaster, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Ice Press, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, tool and die cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage remediation, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blaster Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: like new (used), Year of construction: 2008, operating hours: 12 h, functionality: fully functional, warranty duration: 12 months, Cold Jet Aero 75 DX Machine – Like New This machine is suitable for industrial cleaning, including intensive and large-scale projects. The main advantage of this unit is its minimal reliance on new-generation electronics. It is one of the most powerful machines available on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine, Complete with the Following Equipment: Rsdpfjwg R Edex Ab Isbw - COLD JET AERO 75 DX DRY ICE (only 12 operating hours) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) One of the best machines worldwide. No electronics inside, making it highly reliable and affordable to maintain. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines sold include a 1-year warranty. We offer repairs and maintenance for Cold Jet machines. New Cold Jet machines are also available through us. Contact us for more details. Worldwide Shipping Available. Keywords: Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.