Used Tunnel Kiln for sale (1,048)

Year of construction: 2019, operating hours: 1,400 h, condition: used, functionality: fully functional, For sale is a used tunnel oven from 2019. This oven runs on electricity. Manufacturer: Southstar, China. Total length (external) including entry section: approx. 8,890 mm Entry length: 850 mm The exit is flush with the oven body. External width: approx. 2,005 mm External height: approx. 1,300 mm Distance between the heating plates and heating elements: approx. 120 mm Entry height between heating plates: approx. 135 mm Height from the floor to the top edge of the control panel: approx. 2,065 mm Length of heating plates: approx. 1,015 mm Width of individual heating plates: approx. 96 mm Length of heating plates between the M10 screw heads: 965 mm Lsdjyvqt Hjpfx Ahvehd The motor and gearbox are mounted on top to avoid heat exposure. Unused spare parts, including a motor, gearbox, as well as heating plates and heating elements, are included. This oven was in use for only about 9 months. It consists of 3 zones; top and bottom heat can be controlled separately in each zone. Previously used for pizza production but is suitable for other products as well. The oven served as a backup unit, so this is not a distress sale, but price negotiations are possible. Viewing and test runs can be arranged on site in 32052 Herford. Collection only from Herford. No guarantee or warranty.

Year of construction: 2014, condition: like new (used), COOLING (DEEP FREEZING) HORIZONTAL TUNNEL (Instruction manual added) Liquid nitrogen deep-freezing of foodstuffs Model ZIP FREEZ SILVER LINE 2 type 90X12 Overall dimension in m: Lhsdpfxsyf Hlis Ahvsd Lengh 10,30 Width 2,30 Height 1,81 Height in cleaning position 2,31 Deep-freezing chamber Lengh 8,70 m Effective width 1,20 m Height 0,25 m Surface in m2 10,44 Weight 3200 kg Made by SEPAR, France Was used for cooling of the hot filled desserts In complete with Associated Controls, Conveyor and Pipework

Year of construction: 2019, condition: used, We are offering this used German Kiln Technology HERDWAGENOFEN car kiln, year of manufacture 2019. Reference number: 118004 Year of manufacture: 2019 Operating voltage: 3 × 400 V Current: 64 A Frequency: 50 Hz Fuel: natural gas Calorific value: 10.3 kWh/Nm³ Thermal output: 1650 kW Gas operating pressure: 8 kPa Lhedeycvxmspfx Ahvsd Air operating pressure: 10 kPa Air preheating: 550 °C Kiln temperature: 1500 °C TNV temperature: 930 °C Usable volume: 4.3 m³ If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: Lhjdpfoq Nyzbox Ahved - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: MF09BB30, type of input current: three-phase, Equipment: clamp, FOR SALE – Minipack-Torre Tunnel 50 Shrink Tunnel (Italy) Machine Description For sale: High-quality Minipack-Torre Tunnel 50 shrink tunnel designed for industrial and packaging applications with hot air film shrinking technology. Italian manufacture, renowned for robust build, reliability, and user-friendly operation. Ideal for packaging products in PVC, POF, or polyolefin shrink film. Technical Specifications (approximate): - 7200W, 11A - Manufacturer: Minipack-Torre (Italy) - Model: Tunnel 50 - Type: Shrink tunnel (heat shrink packaging) - Power supply: 400 V / 3-phase / 50 Hz - Adjustable temperature and conveyor speed - Digital control panel (temperature and belt speed) - Stainless steel roller conveyor inside the tunnel - Emergency stop and main power switch - Tunnel dimensions: approx. 850 × 500 mm (W × H) - Mounted on lockable caster wheels for easy mobility Condition: - Fully functional and tested - Well-maintained, ready for immediate use - Available for inspection at Roffelsen Plastics, Ivanka Pri Nitre (Slovakia) Price: €3,000 – negotiable Final price depends on inspection and transport arrangements. Ideal for: - Packaging lines for plastic, cosmetic, or food products Lsdpfx Asxt Dwkjhvohd - Small to medium production facilities - Perfect companion for L-sealers and shrink-wrapping systems Location: Ivanka pri Nitre, Slovakia Phone: available upon request Short version for listings For sale: Minipack-Torre Tunnel 50 shrink tunnel Professional Italian shrink packaging machine in excellent condition. Adjustable temperature and conveyor speed, robust and reliable.

Condition: excellent (used), J4 tunnel oven from year 2012, disassembled and ready for shipment. For more information, please send an email. Ledpfsw Elytox Ahvjhd

Condition: used, Model CES/P-LT-LIN-8mx1.22-PODB-SH suitable for nitrogen all stainless steel belt width ± 1.220 mm nett belt length 8.000 mm Lhsdsywg Hfjpfx Ahvsd dimensions (l x w x h) : ± 9.300 x 2.100 x 2.300 mm 14 kW product height: max. ± 120 mm

Condition: used, cooking length 4.000 mm belt width 800 mm all stainless steel Ledpfx Aeywg Ebohvshd suitable for steam heating temperature measurement 4 zones steam injection per zone (4 zones) air circulation per zone from bottom to top through the belt dimensions (l x w x h) : ± 6.200 x 1.700 x 2.200 mm adjustable speed

Condition: used, Year of construction: 2003, Manufacturer: Pester pac automation Model: PEWO-pack 450 (with PEWO-therm tunnel) Lhsdpfx Ahsx R D Adovod Year: 2003 Type: PE shrink wrapper/band wrapper with shrink tunnel Application: bottles, vials, vertical cartons, etc. Maximum speed: 60 products/min Passage width: 450 mm Configurable batch sizes Product guidance via upper belts and support rails Film type: PE Film width: 50–250 mm Film thickness: 0.025–0.10 mm Max. roll diameter 300 mm. Power supply: 3×400 V + N + PE, 50–60 Hz. Installed power: 10 kW (≈ 19.0 A) Air pressure: ≈ 5–10 bar The machine is sold with a dual-position feed conveyor: Feeding system for shrink wrapper Accumulation conveyor feeder for manual packaging Various formats available Complete documentation

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Lhodpexpww Asfx Ahvod Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg

Condition: excellent (used), Ulma HRX-400 heat tunnel. Ljdpsywi E Rofx Ahvohd

Year of construction: 2004, condition: good (used), Built in 2004 Heating capacity 20.8, 23.4, 31.2 kW Temperature max 280 ° C Exit height 300-400 mm Tunnel width max 500 mm Transport speed adjustable 5-25 m/min Electrical 400 VAC Ledped S Svhofx Ahvshd Electrical 3 Ph, N+PE Electrical 50 Hz Electrical depending on heating 18-30 kW Dimensions (L x W x H) 2600 x 1100 x 1500 mm Equipment: Trimer for delayed switch-off Pressure trolleys on exit Cooling blower above exit Lateral film blowing devise Integrated socket 16 A Chain lubrification

Year of construction: 1989, condition: used, Standard equipment Lhsdsbriv Njpfx Ahved

Condition: used, Year of construction: 2013, operating hours: 9,915 h, Equipment: all wheel drive, Internal vehicle number: G300449 German vehicle, good condition, ready for operation Available immediately at our yard in Kaufungen - Kassel, Germany More INFO from Luis Lucena Liebherr R944C T Year of manufacture: 2013 9,900 operating hours 43.2 tons Lodpfxeyvm Ako Ahvehd Width: 3,050 mm Financing example: * Internal number: G300449 * Purchase price: €49,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €781.55 * Final payment: €9,380.00 If you are interested in this offer or wish to tailor it to your requirements, please contact Mr. Enchev. We look forward to your call. Errors excepted. We are happy to accept your used vehicle as trade-in. Financing available directly in-house. GOLEC NUTZFAHRZEUGE GMBH We speak German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: good (used), functionality: fully functional, power: 209 kW (284.16 HP), gearing type: automatic, fuel type: diesel, operation weight: 30,000 kg, maximum load weight: 11,000 kg, Year of construction: 2012, operating hours: 4,397 h, Equipment: air conditioning, all wheel drive, cabin, soot filter, Steering: Articulated steering with hydraulic power steering Ljdpfx Asytpxhohvjhd Steering angle: ± 40° Fuel tank capacity: 540 l Hydraulic tank capacity: 550 l Tyre size front/rear: 18.00 - 25 Axle load front/rear loaded: 29,400 / 11,600 kg Max. tractive force: 248 kN Engine: Cummins QSL9 Max. power: 209 kW/2000 rpm Max. permitted cross slope: 15% Max. permitted gradient: 28% Turning radius outer/inner: 6,713 / 3,547 mm Bucket capacity (SAE, heaped): 5.4 m³ Maximum speed loaded forward / reverse on level ground: 25.0 km/h Exhaust system: Silencer / Catalytic converter Main dimensions: 9,715 x 2,600 x 2,450 mm (LxWxH) Axle load front/rear unloaded: 13,100 / 16,900 kg Operating weight: 30,000 kg Payload: 11,000 kg

Condition: used, suitable for nitrogen all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm Lhjdpfx Ahsytn Rcovod

Condition: used, Year of construction: 2018, functionality: unexamined, input voltage: 400 V, overall weight: 472 kg, input current: 19 A, conveyor belt width: 640 mm, input frequency: 50 Hz, temperature: 180 °C, Brand: Tesoma Model: Mini Standard Year of manufacture: 2018 Serial number: 21700647 Voltage: 400 V Frequency (Hz): 50 Amperage (A): 19 Dimensions LxWxH (mm): 2220 x 1120 x 1330 Weight (kg) approx.: 472 Stock quantity: 1 Manufactured in: Germany Ledpfx Ahoytf Npevshd Comments: Max contributable solvent volume 0.30 kg/hr, max waste air volume flow 50 m³/hr, conveyor 2220 x 640 mm, 13 kW.

Condition: used, functionality: limited functionality, power: 168 kW (228.42 HP), gearing type: automatic, fuel type: diesel, color: yellow, empty load weight: 20,650 kg, maximum load weight: 6,000 kg, Year of construction: 2023, Operation: Radio remote control Fire suppression system: Ansul Width: 2,335 mm Height with bucket raised: 4,400 mm Length, standard machine: 8,945 mm Height with bucket lowered: 2,235 mm Engine power: 168 kW / 225 HP Engine: Cummins B6.7, EPA Tier 4F/EU Stage V Lhsdsytcy Eepfx Ahvsd Tipping force, mechanical: 12,500 kg Breakout force, hydraulic: 13,400 kg Handling capacity, standard bucket: 6,000 kg Operating weight (empty): 20,650 kg Axle load front/rear: 8,910 / 11,750 kg

Condition: good (used), Year of construction: 2016, operating hours: 1,200 h, functionality: fully functional, machine/vehicle number: 90-0122-DDI-IR-INTE, input voltage: 415 V, total length: 3,000 mm, total width: 1,000 mm, total height: 1,000 mm, type of input current: three-phase, year of last overhaul: 2026, conveyor belt width: 800 mm, UV drying tunnel manufactured by Natgraph, designed for use with screen printing machines. The machine was manufactured in 2016 and is in very good technical condition. The tunnel is currently in production use and operates without issues. Main Features: - IR heating section - 2 UV lamps with precise and independent power control - Integrated cooling section to reduce the temperature of printed sheets after curing - Automatic stacker for collecting finished sheets in a neat stack - Possibility to connect with a screen printing machine - Lowering table, which provides easy operator access to the printing machine Working Process The tunnel is used for UV ink curing in the screen printing process. Printed sheets pass through the IR section and then through the UV curing section, where the ink is quickly and evenly cured by UV radiation. After curing, the sheets pass through the cooling section to reduce their temperature. Finished sheets are then automatically collected by the stacker. When connected to a printing machine, the tunnel can automatically adjust the UV lamp power to save energy. Machine Condition Year of manufacture: 2016 Technical condition: very good Machine currently in continuous production use Regularly maintained Included Equipment Natgraph UV dryer tunnel IR heating section 2 UV curing lamps Cooling section Lhjdeyuztgepfx Ahvsd Automatic sheet stacker ✔ Machine ready for production ✔ Inspection possible during operation

Condition: used, functionality: fully functional, For sale: HILDEBRAND BRUNNER chamber kiln for wood – a complete, fully functional solution for professional lumber drying. External dimensions: Width: 7.10 m Length: 7.20 m Height: 5.0 m Chamber loading dimensions: Loading width: 6.70 m Loading length: 5.90 m Loading height: 3.20 m Fully computer-controlled Temperature and humidity monitoring Stable, maintenance-free operation Ljdpfx Ahjyua Hfsvjhd Automatic spraying Automatic speed change Automatic opening of ventilation chimneys Technical condition: The kiln is fully operational and has been used in accordance with its intended purpose.

Condition: like new (used), Year of construction: 2002, Stainless Steel Shrink Wrapping Tunnel Wrapping Tunnel for packing products with strech foil, Producer: Schur Lhodpfshqfnlex Ahved Machine Model: E 340 Year of production: 2002 Complete Stainless Steel Tunnel Opening dimensions 750 x 400 mm. That is not used long time, like new one!

Condition: good (used), Year of construction: 2007, 347 USED Hobart tunnel washer. EXTERNAL DIMENSIONS (in cm): - H: 220, - W: 145, - L: 540. ENTRANCE DIMENSIONS (in cm): - W: 86, - H: 46. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport of the device. The price is a net price. Ledoyt Nwwjpfx Ahvehd Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Model CES-LT-LIN-9x0.66-PODB-SH suitable for nitrogen all stainless steel belt width ± 660 mm nett belt length 9.000 mm total length ± 10.500 mm dimensions (l x w x h) : ± 10.500 x 1.431 x 2.230 mm 12 kW product height: max. ± 120 mm Lhsdpjypbg Njfx Ahved

Condition: used, Year of construction: 1993, operating hours: 48,000 h, Self-stacking spiral freezer belt, Frigoscandia FRIGoBELT - replaced in 2010 Link height: 80mm / max. product height: 65mm / Net belt width: 580mm / Belt width between infeed covers; 535mm / belt stack with 24 tiers / Belt mesh: M13-1.5 / 24 tiers (possible to put more tiers) Layout N-S CCR Evaporators SS/AL / number of coils: 1 / number of fans: 2 Standard -replaced in 2011 CIP belt cleaning system Enclosure: W/W (white inside and white outside) - replaced in 2010 Chain, balls and plastic guides replaced in 2017 Refrigerant: ammonia / refrigeration: R717 Max total heat removal 252 kW/h Lodpfsvf Iuzox Ahvshd ProCare service till 2018 Documentation available Stop running in 2018 Possibility of dismantling and preparation for transport for an additional fee

Condition: used, suitable for thermic oil heating (180 kW) Maximum baking temperature 220-250 °C adjustable temperature adjustable speed Minimum cooking time: 4 min Maximum cooking time: 60 min belt width 600 mm canopy with electric hoists suitable for steam injection (to heat up and to improve product yields) 400V-50 Hz-42A dimensions (l x w x h) : ± 10.000 x 2.000 x 2.700 mm Lhjdpfx Ajyn Dc Rjhved