Used Dry Tunnel for sale (3,275)

Condition: new, Year of construction: 2026, Dry rotary vane vacuum pump. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 80 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us. Pedpfx Asftzkqohvepp

Condition: new, Year of construction: 2025, Dry rotary vane vacuum pump. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Pedpeftzhnefx Ahvspp Nominal flow: 140 m3 / h at 50Hz. Final vacuum: 150 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2026, Rotary dry vane vacuum pump model MVS-V250. Available in stock. Completely new with 12 months warranty. Nominal flow: 250 m3 / h at 50Hz. Pjdpsftzviefx Ahvopp Final vacuum: 200 mbar Any clarification, do not hesitate to contact us.

Year of construction: 2018, condition: new, Freeze dryer completly new. Pilot plant. Capacity:1 kg / 8hrs Effective Area :0.15 m2 Wet Input per 8 hr: 1 Kg Dry Output per 8 hr: 0,2 Kg Temp Range Drying: 30 ºC - 100 ºC Water Removal Capacity: 0,8 Kg Ultimate Condenser Temp: -40 ºC Defrosting Method: Natural Total Connected Load : 1Ph/15 Amp Connection Average Connected Load: 1Ph/15 Amp Connection Ppjdjfn Iudepfx Ahvjp Plant dimensions: 1,1m*0,7m*1,5m 1. Freeze Drying Capacity: Wet input 1 kg. per shift. On a higher side, each shift shall be of 8 to 8.5 Hrs. The wet input can either be biological cultures, enzymes, polymers, extracts, sprouts, vegetables, fruits, nutraceuticals, herbs, spices, sea foods, instant curries/gravies etc. of minimum 15% solids. 2. Residual moisture: Final moisture content on the product shall be less than 4%. 3. Compressed air: Maximum pressure 5Kg/Sq.cm. Flow rate 3 cubic Meter/Hr. Material: Stainless steel 304 Flow rate vacuum pump: 13 m3/h

Year of construction: 2001, condition: ready for operation (used), Built in 2001 Belt width 400 mm Equipment • drying tower upward Pedpfx Ahod Idlaovepp • infeed left at the bottom • outfeed 90° at the top

Year of construction: 1997, condition: used, Built in 1997 Input height max 500 mm Output level max 3.000 mm Length conveyor belt approx. 54 m Equipment • drying tower downward Ppsdpfxec Nhpfj Ahvop • infeed left at the top • outfeed 90° at the bottom

Year of construction: 1997, condition: used, Built in 1997 Length conveyor belt approx. 55 m Equipment • drying tower upward Pjdpfxec I Ig Es Ahvepp • infeed left at the bottom • outfeed 270° at the top

Year of construction: 2004, condition: good (used), Built in 2004 Heating capacity 20.8, 23.4, 31.2 kW Temperature max 280 ° C Exit height 300-400 mm Tunnel width max 500 mm Transport speed adjustable 5-25 m/min Ppoded S Svhepfx Ahvjp Electrical 400 VAC Electrical 3 Ph, N+PE Electrical 50 Hz Electrical depending on heating 18-30 kW Dimensions (L x W x H) 2600 x 1100 x 1500 mm Equipment: Trimer for delayed switch-off Pressure trolleys on exit Cooling blower above exit Lateral film blowing devise Integrated socket 16 A Chain lubrification

Year of construction: 1989, condition: used, Standard equipment Ppedebriv Njpfx Ahvsp

Year of construction: 2020, operating hours: 300 h, condition: like new (used), functionality: fully functional, machine/vehicle number: T033, We are offering this France Etuves XUE686 drying oven – laboratory oven – etuve, in like-new condition, from the year 2020. Pedpfx Aeywcahjhvspp Manufacturer: France Etuves Model: XUE686 Year of manufacture: 2020 Condition: like new Machine type: Drying Oven – Laboratory Oven – Etuve If you have any questions or need further information, please feel free to message or call us. Ventilated universal ovens suitable for a wide range of applications. Temperature up to +300°C. Suitable for all drying, heating, hot storage, sterilization, component aging, curing, or any other thermal testing applications... in laboratories and across all sectors of industry. Available in 8 volumes, from 32 to 980 liters. Robust construction. Outer sheet steel housing coated with white and blue epoxy paint. Bright polished stainless steel interior chamber, corrosion-resistant. Ø 20 mm cable entry with silicone plug. Easy cleaning thanks to rounded inner chamber corners. Excellent thermal insulation guarantees reduced power consumption and rapid heating. Adjustable air renewal. Air outlet can be connected to an extraction system. Accurate and reliable electronic PID temperature controller. Working temperature: ambient +10°C up to 300°C. Accuracy: 0.1°C, stability: ±0.2°C. Display of setpoint and actual temperature, as well as heating power used. 1 program with 8 segments (4 programmable temperature ramps and 4 holding stages). Repeat loop function. Alarm prevents temperature overshoots. Class 3.1 overtemperature safety with visual and audible alarm. Supplied with two shelves (max load 30 kg).

Condition: good (used), Year of construction: 2020, operating hours: 340 h, Technical specifications: • Year of manufacture: 08/2020 • Operating hours: 340 • Dry ice capacity: 18.2 kg Pedpfx Aeywawwohvjpp • Feed rate: 0–2 kg/min • Dimensions: 91.4 × 50.8 × 101.6 cm • Weight: approx. 117 kg • Air consumption: 1.4–4.7 m³/min at 5.5 bar • Blasting pressure range: 1.4–17.2 bar Includes hose package, gun, and round nozzle. Net price plus 19% VAT.

Condition: used, functionality: fully functional, Drycooler, Free cooler, Glycol cooler, V-Coooler, Hybrid cooler, Cooling tower, Heat exchangers in different capacity , Ppsdpfsywaa Ejx Ahvop Güntner, Cabero, GEA, Thermokey, Thermofin, Refrion, Swegon, Jaeggi, Gohl, ec. ec. from 50KW- 5000KW cooling capacity for Genset 95-70°C or chillers 45 38°c

Condition: new, Year of construction: 2026, Bin capacity: 40 [kg]. Capacity: Up to 140 [bulbs/min]. Raw material size: 45 - 140 [mm]. Overall width of device: 1050 [mm]. Total height of the machine: 1880 [mm]. Total length of machine: 4830 [mm]. Number of operating paths: 2 loading height of onion: 1000 [mm] Height of onion pick-up: 700 [mm] Height of waste collection: 400 [mm]. Power supply: 3 x 400 [V] / 50 [Hz] Installed power: 1,2 [kW]. Compressed air connection: 8-10 [bar]. Air consumption: 1,9 [m3/min]. Noise level: Over 80 [dB]. Construction materials: Stainless steel and plastics approved for contact with food Ppsdjd Nimajpfx Ahvep CE certificate: yes Cutter: no

Condition: used, Year of construction: 2010, operating hours: 15,000 h, machine/vehicle number: M312, Technical Specifications and Performance Data This pre-owned monoblock is manufactured by Omar and integrates drying, capsule application, and self-adhesive labeling functions into a compact rotary system designed for professional beverage production. The machine is equipped with a double capsule applicator with rotating heads for precise capsule application and three self-adhesive labeling units for front, back, and neck labels. It is ideal for presenting high-quality wines and can be integrated into a used bottling line or as a stand-alone module in an industrial packaging environment. Manufacturer: Omar Model: Simphony Washer-Dryer Year: 2010 Configuration: Drying module + double capsuling unit with rolling heads + 3 self-adhesive labeling stations (front/back/neck) Bottle Formats: Compatible with Bordeaux and Burgundy bottles Label Application: Pressure-sensitive (self-adhesive) for front, back, and neck Container Type: Glass bottles Format Examples: Reference capacity 0.5 L Application: Suitable for integration into beverage production lines and industrial filling Advanced Automation and Control Systems The monoblock is designed for synchronized operation of the drying, capsuling, and labeling units. The self-adhesive labeling stations ensure precise application with fine adjustment for front, back, and neck labels. The double capsuling stations with rolling heads ensure consistent finishing quality on wine capsuling units. Rapid mechanical adjustments support the changeover from Bordeaux to Burgundy bottles, improving production flexibility in existing bottling lines. Production Line Integration Capability Designed for in-line operation, the unit interfaces upstream with fillers and capping/closing machines and downstream with inspection and packaging equipment. It adapts to standard conveyor logistics, enabling smooth transfer of glass bottles. Format changes between compatible wine bottle geometries are supported, making the machine suitable for multi-SKU beverage production. Machine Condition and Maintenance History The machine has undergone a thorough restoration, which included purchase, transport, and recommissioning, resulting in a fully functional and reliable second-hand asset. It is ready for use in a production setting, suitable for rapid integration into an existing bottling line. Operational Performance and Versatility Optimized for glass wine bottles, the monoblock combines drying, precise capsule application with rolling heads, and three-point self-adhesive labeling. This configuration supports premium packaging standards and is suitable for wineries and beverage producers seeking consistent presentation quality in an industrial packaging environment. Installation Requirements and Site Preparation The rotary machine’s compact footprint allows for easy placement within typical bottling rooms. Connection to existing conveyor belts and utilities is recommended for optimal integration. The site layout must allow for safe operator access around the guards and clear spaces for format changeovers and routine maintenance. Certification of Conformity and Safety Standards The monoblock includes protective guards around the moving units, with standard operator guards and emergency stop functions typical of modern bottling... Ppodpfsygh I Usx Ahvsp

Condition: excellent (used), Van Aarsen radiator model 2200 Ppsdpswcp U Nofx Ahvjp

Condition: excellent (used), Year of construction: 2021, operating hours: 4,373 h, overall weight: 530 kg, volume flow: 1.41 m³/h, operating pressure: 10 bar, input voltage: 400 V, pressure: 10 bar, Equipment: refrigerant dryer, APS 15 COMBI DRY X screw compressor On 500 l pressure vessel With refrigerant dryer. Ppsdpfx Ahswxzfxsvjp Motor 11 kW Output 1.41 m3/min Pressure 10 bar Year of manufacture 2021 Operating hours 4373 MTG

Condition: ready for operation (used), Binder ED 240 / E2 Drying Oven Incubator Heating Cabinet Brooder Cabinet No. 1147 Set Temperature: 300°C Dimensions (internal): 800 mm × 500 mm × 600 mm (W x D x H) Dimensions (external): 1040 mm × 800 mm × 820 mm (W x D x H) Weight: approx. 85 kg Power: 2.70 kW You are welcome to arrange a viewing. We can organize affordable shipping for you! You will receive a proper invoice. Ppodoyvun Ispfx Ahvop For international customers, a net invoice can also be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. Company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from the technical data as well as errors in the description of the item may occur and are subject to change.

Year of construction: 2022, condition: ready for operation (used), Binder FED 260 Drying Oven Incubator Heating Oven Brooding Cabinet No. 1148 Set Temperature: 300°C Dimensions (interior): 650mm × 515mm × 780mm (W x D x H) Dimensions (exterior): 810mm × 760mm × 940mm (W x D x H) Weight: approx. 84 kg Power: 2.30 kW Year of manufacture: 2022 You are welcome to arrange a viewing appointment. We can arrange affordable shipping for you upon request! Ppsdpfxeyvug Rs Ahvjp You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT identification number is supplied. Subject to prior sale. Visit our shop to view more of our offers. All company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description may occur and are reserved.

Condition: ready for operation (used), Binder FD 240 Drying Oven Incubator Heating Cabinet Brooder Cabinet No. 1029 Ppodeyvua Rjpfx Ahvop Temperature Range: 5°C above ambient temperature up to 300°C Internal Dimensions: 800 mm × 510 mm × 600 mm (W x D x H) External Dimensions: 1035 mm × 745 mm × 825 mm (W x D x H) Weight: approx. 96 kg Power: 2.70 kW You are welcome to schedule a viewing appointment. We are happy to arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued (VAT ID required). Subject to prior sale. Visit our shop and take a look at our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviations from technical data as well as errors in the item description may occur and are subject to change.

Condition: good (used), functionality: fully functional, power: 209 kW (284.16 HP), gearing type: automatic, fuel type: diesel, operation weight: 30,000 kg, maximum load weight: 11,000 kg, Year of construction: 2012, operating hours: 4,397 h, Equipment: air conditioning, all wheel drive, cabin, soot filter, Steering: Articulated steering with hydraulic power steering Steering angle: ± 40° Fuel tank capacity: 540 l Hydraulic tank capacity: 550 l Tyre size front/rear: 18.00 - 25 Axle load front/rear loaded: 29,400 / 11,600 kg Max. tractive force: 248 kN Engine: Cummins QSL9 Ppsdpfxsytpxhe Ahvjp Max. power: 209 kW/2000 rpm Max. permitted cross slope: 15% Max. permitted gradient: 28% Turning radius outer/inner: 6,713 / 3,547 mm Bucket capacity (SAE, heaped): 5.4 m³ Maximum speed loaded forward / reverse on level ground: 25.0 km/h Exhaust system: Silencer / Catalytic converter Main dimensions: 9,715 x 2,600 x 2,450 mm (LxWxH) Axle load front/rear unloaded: 13,100 / 16,900 kg Operating weight: 30,000 kg Payload: 11,000 kg

Condition: used, suitable for nitrogen all stainless steel Pjdpfx Ahoytn Rcjvjpp belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm product height: max. ± 80 mm

Condition: ready for operation (used), Binder BD 115 Drying Oven Incubator Heating Cabinet Brooder Cabinet No. 369 Set temperature: 100°C Dimensions (internal): 510mm × 420mm × 530mm (W x D x H) Ppsdpfeyvrm Uex Ahvsp Dimensions (external): 710mm × 605mm × 705mm (W x D x H) Weight: approx. 55 kg Nominal volume: 112 L Power: 0.40 kW You are welcome to arrange a viewing. We can also organize affordable shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued. This requires a valid VAT identification number. Subject to prior sale. Visit our shop and check out our other offers as well. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description of the products only. Variations in technical data and errors in the product description are possible and subject to change.

Year of construction: 2019, operating hours: 1,400 h, condition: used, functionality: fully functional, For sale is a used tunnel oven from 2019. This oven runs on electricity. Manufacturer: Southstar, China. Total length (external) including entry section: approx. 8,890 mm Pjdpoyvqt Hofx Ahvopp Entry length: 850 mm The exit is flush with the oven body. External width: approx. 2,005 mm External height: approx. 1,300 mm Distance between the heating plates and heating elements: approx. 120 mm Entry height between heating plates: approx. 135 mm Height from the floor to the top edge of the control panel: approx. 2,065 mm Length of heating plates: approx. 1,015 mm Width of individual heating plates: approx. 96 mm Length of heating plates between the M10 screw heads: 965 mm The motor and gearbox are mounted on top to avoid heat exposure. Unused spare parts, including a motor, gearbox, as well as heating plates and heating elements, are included. This oven was in use for only about 9 months. It consists of 3 zones; top and bottom heat can be controlled separately in each zone. Previously used for pizza production but is suitable for other products as well. The oven served as a backup unit, so this is not a distress sale, but price negotiations are possible. Viewing and test runs can be arranged on site in 32052 Herford. Collection only from Herford. No guarantee or warranty.

Condition: ready for operation (used), Memmert SFE 600 heating furnace max. 70°C For further technical data see pictures. You are welcome to come by for an inspection. Ppjdpfxoip Um Ae Ahvop You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data and errors in the description of the article can happen and remain reserved.

Condition: ready for operation (used), Heraeus UT 6060 heating furnace no. 415 max. 300°C Dimensions: Outside: 750mm x 730mm x 580mm ( L x W x H ) Inside: 400mm x 350mm x 380mm ( L x W x H ) Ppedpfx Ahslt Ut Rsvsp For more technical data, see pictures. You are welcome to visit for inspection. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data as well as errors in the description of the article can happen and remain reserved.