Used Dry Stove for sale (2,650)

Year of construction: 2014, condition: repair required (used), functionality: limited functionality, • Production freeze dryer, Parker Freeze Dry 5-945-135, custom model, made to order for client’s specification; CE-marked, 400V 50Hz three-phase power. Nominal condensercapacity 453kg of ice. • Dual phase vacuum pump cluster, Busch, RA0255 main pump (max. 25A 400V) + WV1500 booster pump (max. 20A 400V), serviced 2023, overhauled 2021. Hfjdpfxjz Dz Rto Ag Ejn • Heat control system, programmable, West ProVU + 4 x 6100+ • Five product carts, 27 heated shelves and approx.100kg capacity each (max. 50A 400V). • 2 Full tray sets (2x135 pieces), 18x26 inch, aluminum. • Outdoor cooling unit, cooling + hot gas de-icing, compressor rebuilt and overhauled 2022/2025. Max power consumption 50A 400V. cooling face measurements 4.6mx2.4mx1.3m measurements of the carts 20cmx120cmx70cm

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine This is a combo machine pelletizer and sandblasting machine (two in one) Hfedehmi Ucopfx Ag Esn very low operation hours

Condition: new, Year of construction: 2026, Combustion chamber output: 350 kW Working output: 279 kW Flue gas outlet diameter: 200 mm Hot air distribution ducts: 1 x 600 mm Combustion chamber length: 1200 mm Combustion chamber width: 740 mm Combustion chamber height: 1040 mm Air delivery: 17,800 m³/h Hot air fan power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Area to be heated: 1,000 m² Oven height without hot air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Hedpfx Ageyffylj Ejfn Weight: 850 kg

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: Drymex S 5, functionality: fully functional, operating hours: 8,286 h, Beautiful, robust, and excellently maintained drying system, consisting of 2 units, 1 large drying chamber made of stainless steel with a perforated sheet metal floor incl. piping and the Blue Evolution XL steam cleaning device from Beam. Ideal for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying with electricity (below 40°C), for indoor use only. The individual segments of the perforated sheet metal floor can be opened individually (for cleaning). In top condition, very solidly built. Dimensions: Units - 1.95 x 1.25 x 2.00 m, Drying chamber: 7.40 x 2.67 x 2.50 m. Hfjdoyffqqspfx Ag Esn Stainless steel: 1.4301 The entire system is very well maintained, still assembled, and fully operational. Can be inspected at any time while powered on. The drying chamber can also be divided and connected to one unit each. This will provide you with two identical dryers. Price negotiable.

Condition: like new (used), Year of construction: 2009, operating hours: 467 h, functionality: fully functional, Plow and play. Very low-hours, fully equipped mobile dry ice production plant: Total operating time for the pelletizer is 467 hours. The last full service was performed in 2026. Pelletizer * Mobile, containerized manufacturing system * "Production HUB with Triventek PE80 pelletizer, 80 kg/h" (Denmark), built into a portable container with lighting. * ISO CO2 tank, 8 m3, portable on a frame, manufacturer: Wessington Cryogenics Ltd, England. * 3 pieces of thermo containers, 200 kg capacity each. New price: €250,000 * All manufactured in 2009, but very little used. Mobile & Modular: Built directly into a 10-foot High Cube ISO shipping container, it can be easily transported to rugged or remote locations. Hfsdpfxjy R I Tms Ag Een Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 17,000 h, power: 7 kW (9.52 HP), temperature: 70 °C, inner dimension length: 6,000 mm, inner dimension width: 2,800 mm, inner dimension height: 2,500 mm, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, Incoplan DRY 6 model for sale. Capacity: 14-20 m3. Maximum wood length: 6000 mm. Bundle dimensions: 6000 mm x 120 mm x 120 mm. Hedpfeziwq Njx Ag Eofn Number of bundles in the drying kiln: 4. Accessories: 8 m high chimney, manufactured in 2018. 2000 L hot water tank, manufactured in 2018. 100 kW wood-fired boiler, manufactured in 2000. The demolition is the responsibility of the buyer or seller, as agreed.

Condition: used, functionality: fully functional, Price with dismantling. Drysorter with control system Mitsubishi A2. Drysorter capacity 80 pc/min after rebuild 2021 new control system Siemens S7 1500, ABB580 frequency converters and Finscan 2019 automatic sorter. Drysorter equipped with Dynagrade 2015 (updated 2020). Hfodjyzhvvspfx Ag Eon

Condition: like new (used), Year of construction: 2020, operating hours: 635 h, functionality: fully functional, Turn and loosen digestate, silage maize and compost in a drying container so moisture escapes evenly and the volume drops sharply, even with heavy, poorly flowing material. This MULTIMIX HD screw mixer from Martin Energietechnik is the heavy-duty version, built for separated digestate that the standard model cannot handle. Built 10/2020, approx. 635 operating hours, as-new condition. Checked, serviced and ready for use by us. All 5 screws are in good condition. Hjdpjz Rv Tdefx Ag Esfn Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Pickup and transport (750 kg gross) have to be scheduled. Best for: biogas plants and farms that dry digestate, silage maize or compost in containers. Not suitable for: drying containers with dimensions other than those listed below. Fits drying containers with: • Length 6500 mm • Inner width 2314 mm • Inner height 2090 mm • Round-tube track D = 89 mm What the equipment means in practice: 4.4 kW drive motor with heavy-duty chains: strong drive for heavy material, and the automatic chain tensioner keeps the chain tight by itself 5 conical special screws for silage maize and digestate: matched to a container height of 2090 mm Travel drive with 4 driven wheels: the unit moves along the track on its own PLC control with manual and automatic mode: set the pause time of the reversing cycle steplessly, then let it run Trailing cable approx. 10 m with CEE 16 A plug, 5-pole: connects to standard three-phase power Complete package: base unit with 4.4 kW motor, chain drive with automatic tensioner, 4-hole flange for the screws, 5 conical special screws, travel drive, control cabinet with PLC (safety functions, manual/automatic mode) and connection cable to the unit. The machine in detail: compared with the standard model, the HD version has, according to the manufacturer, a wider base frame, special screws, higher drive power and a reinforced drive train. Technical data: Martin Energietechnik, MULTIMIX HD, built 10/2020, approx. 635 h, 4.4 kW, CEE 16 A 5-pole, gross/net weight 750 kg / 695 kg, customs tariff no. 8479.8220, country of origin Germany. Condition: as new, usual cosmetic signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: CHF 15,000. Why you can buy with confidence: built 10/2020, approx. 635 operating hours, checked and serviced by us, all 5 screws in good condition, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the machine is what this listing says it is, complete and functional when you see it. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: this is a single used machine, not ongoing stock. Once sold, this exact configuration is gone. First-buyer bonus: buy by October 27, 2026 and receive CHF 1,000 off, so CHF 14,000 instead of CHF 15,000. Valid until October 27, 2026, or until the machine is sold. Action: send us your intended application, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 30,745 h, functionality: fully functional, overall weight: 2,700 kg, power: 388 kW (527.53 HP), type of input current: three-phase, number of chambers: 3, Equipment: documentation/manual, We offer this ready-to-use Lauber L-ENZ 370 drying system, manufactured in 2019. – professional wood dryer, 388 kW + 3 drying containers Technology from the German manufacturer LAUBER Trocknungstechnik, manufactured in 2019, serial number 41199. The equipment is suitable for utilizing excess heat from a boiler, biogas plant, cogeneration unit, biomass boiler, or other heat source. Technical parameters: - Manufacturer: LAUBER Trocknungstechnik - Type: L-ENZ 370-4 - Serial number: 41199 - Year of manufacture: 2019 - Thermal output: approx. 388 kW Hfedpez I Threfx Ag Een - Fan: 11 kW - Power supply: 400/230 V, 3~NPE, 50 Hz - Automatic LAUBER control - Touchscreen control panel - Fan frequency inverter - Circulation pump control - Heat exchanger - WILO circulation pump - Complete electrical installation and switchgear - Complete technical documentation The technical documentation states a thermal output of 388 kW, operating temperatures of 90/65 °C for the heating water, and a water flow rate of 15.2 m³/h. The weight of the unit itself is approximately 2,700 kg. Zeichnung_LENZ_370_4_mit_techni… Drying containers The offer includes: 3 × drying container - Volume of one container: 15 m³ - Total capacity: 45 m³ - The containers are designed for drying material using the LAUBER hot-air system. Suitable applications: The technology is particularly suitable for: - 🌲 firewood - 🌲 wood chips - 🌲 wood biomass - 🌲 sawdust - 🌲 other loose wood materials - or other materials depending on the specific drying technology The LAUBER system uses warm air, which is blown through the material being dried in the containers. The manufacturer uses it for drying wood chips, firewood, and other loose materials. lauber-holztrockner.de Dimensions of the main unit Approximately: 4,630 × 2,390 × 2,750 mm Weight approx. 2,700 kg. Condition: The technology is unused and offered for sale. Complete technical documentation is available, including electrical diagrams, technical drawings, and the manufacturer's documentation. Condition: ready to use Type: drying system If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Year of construction: 2017, input voltage: 400 V, input frequency: 50 Hz, input current: 38 A, power: 26.7 kW (36.30 HP), We are offering this used Hobart 305GH dry steam convection oven / rapid steam oven, manufactured in 2017. Model: 305GH Serial number: 970221933 Rated voltage: 400 V Frequency: 50/60 Hz Phases: 3+N Hjdpjz Riwcefx Ag Esfn Connection power: 26.7 kW Current: 38.7 A Water inlet pressure: 1.7 - 10.0 bar Operating pressure: 1.0 bar Protection class: IP33 ML number: 305GH-31 Year of manufacture: 2017 If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2017, operating hours: 1 h, condition: used, functionality: fully functional, INTEGRATED DRYERS AND PELLETING SYSTEM WOOD SHAVINGS DRYING OLIVE POMACE DRYING FULL AUTOMATION WITH VARIABLE SPEED MOTORS STAINLESS STEEL FEEDING AUGERS CONVEYOR TRANSPORT SYSTEMS FUEL AND PRODUCT FEED BUNKERS Hedpsw Hgbhsfx Ag Eefn 9 METER STAINLESS ROTARY DRUM 15 METER IRON ROTARY DRUM 8 MILLION KCAL SOLID FUEL BOILER WITH FULL CAPACITY, IT HAS THE LARGEST WOOD SHAVING DRYING CAPACITY IN TURKEY AT 15–20 TONS/HOUR. IN ACCORDANCE WITH EUROPEAN STANDARDS FOR DETAILED INFORMATION, PLEASE CONTACT US

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Hfedpfxezxggle Ag Ejn Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 Hedpfoz I Dzijx Ag Ejfn - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: used, Year of construction: 2003, operating hours: 12,000 h, functionality: fully functional, ASCO BP407 – Automatic dry ice production machine for blocks, slices, and pellets Year of manufacture 2003 | 12,635 operating hours | Fully functional | Includes documentation and maintenance history For sale at DrDryice: an ASCO BP407 automatic dry ice production machine for the production of dry ice blocks, slices, and pellets. The machine is used, fully functional, and in good working order. The machine can produce slices in various thicknesses and pellets of 3 mm and 16 mm. The molds for the different product formats are integrated and are selected via the touchscreen. Manually changing the molds is therefore not necessary. Stated production capacity: up to approximately 400 kg per hour, depending on the chosen end product, block thickness, or pellet size. The previous user reported an actual production of 250–300 kg per hour. These are the capacity figures from the existing advertisement; the actual production depends on the operating conditions and product settings. maschinensucher.at Maintenance and operating hours The last maintenance service by ASCO was performed in December 2016, with a meter reading of 12,032 hours. After this maintenance service, the machine has only operated for another 603 hours. Hfedpfx Asy R I Uqjg Eon Total operating hours: 12,032 + 603 = 12,635 hours. The pump and cylinder have been replaced in the past. Documentation is available with the machine, including technical manuals and service reports. Used Machines The machine is offered with the available maintenance history and associated additional parts and spare parts. Origin and reason for sale The machine comes from a large industrial factory that has invested in a new production line and has switched to a different machine manufacturer. Due to this change in the production setup, the ASCO BP407 has been taken out of production and is now available for sale. This is a used, fully functional machine. Worldwide Shipping Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, Glastronic-made 1600mm vertical glass washing and drying machine. The machine is in a well-maintained and inspected condition, ready for immediate use. New squeegee rubbers, new bearings. Working direction: left to right. Maximum washable glass height: 1600mm. Number of brushes: 4. Hfjdpfxsz Ngyre Ag Eon Drying fan. Stainless steel cabin. Water heating. Backlighting. Stop sensor. The machine has been fully inspected, cleaned, and is in perfect working order and can be viewed at our facility!

Condition: good (used), Year of construction: 1983, functionality: unexamined, machine/vehicle number: SFV 1139, overall weight: 1,000 kg, total height: 1,800 mm, total width: 500 mm, total length: 4,150 mm, power: 3.4 kW (4.62 HP), This is a vibrating conveying / vibrating fluidized bed dryer-cooler unit from SCHENCK Process (SFV series/type). Hfjdpfszxzrpex Ag Eon Operation: The equipment uses vibration to advance the bulk product along a perforated grid (width 260 mm). Air (hot or cold) is generally injected from below to fluidize, dry, cool, or dust-remove the material during its transfer. Drive system: It is powered by two Schenck vibrating/unbalance motors (SED 180-4 type), each with a power of 1.7 kW, mounted under the chassis. They create the oscillatory movement necessary for transport via micro-jumps. Suspension: The machine body rests on large coil springs to isolate the fixed white chassis (3210x730x930 mm) from the vibrations. Materials: Constructed of stainless steel with sealed inspection ports, suitable for the requirements of the food, chemical, or pharmaceutical industries.

Condition: used, Item description Temperature range: +20 to +80 °C (IN/IF) Setting accuracy: 0.1 °C Capacity: 161 liters Hsdjz Szlzepfx Ag Ejfn External dimensions (W × H × D): approx. 745 × 1107 × 584 mm External depth including door handle: approx. 640 mm Internal dimensions (W × H × D): approx. 560 × 720 × 400 mm Weight: 72 kg Power: 1,600 W (IN/IF) Power supply: 230 V Power consumption: 7.0 A (IN/IF) Max. number of shelves: 8 Max. load per shelf: 30 kg Max. total load: 210 kg

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently around €250,000. Description: Complete system for dosing and packaging dry ice pellets. Hfsdpfow Ttxfox Ag Een Fully automated process with high capacity and reliability. Advantages: Additional information about the bagging machine. System Dimensions: The entire system is 6 meters long, 3.20 meters high, and approximately 1.20 meters wide. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight line. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in smaller spaces without affecting its operation. The height of the system is not adjustable. Machine Output: The machine has a capacity of approximately 500 kg per hour. Dimensions and Weight of the Bags: The bag sizes can be fully adjusted to your needs. This ranges from small bags of approximately 750 grams to larger bags of 20 kg. This can be flexibly adjusted to meet your production needs. Maintenance Costs: The average annual maintenance cost, excluding materials and call-out charges, is between €1200 and €1500 per year. Worldwide Shipping. Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing and packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, used dry ice production machine, refurbished dry ice machine, dry ice supply system, high-capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine for dry ice, high-output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food-grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high-reliability dry ice machine. DrDryice.

Condition: used, Year of construction: 2018, machine/vehicle number: 505, functionality: fully functional, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, inner dimension length: 11,700 mm, inner dimension width: 1,300 mm, inner dimension height: 2,350 mm, total length: 13,130 mm, total width: 2,840 mm, total height: 2,900 mm, overall weight: 6,600 kg, Equipment: CE marking, documentation/manual, We are selling our drying container, manufactured by Eberl Drying Systems. The system features an infeed device with radio remote control. The stacking dimensions are: height 2200 mm, width 1250 mm, length 11600 mm. The system has radio-controlled measuring points and is controlled via the Eberl drying program. Hfjdpfx Agez Dtuke Een

Condition: new, Year of construction: 2024, functionality: fully functional, Brand new machine never used, selling at very low price. Hfjdpfx Aswcfvpsg Esn

Condition: excellent (used), Year of construction: 2002, ALU-profile mitre saw Fabr.Dry Tech Type:355 MLS Year 2002. Saw blade dm.355 mm Cutting range round max.120 mm Square max 120 mm X 120 mm Hjdpetwn E Uofx Ag Esfn

Condition: used, Year of construction: 2021, - Number of chambers: 3 - Volume per chamber: 90 m3 - Chamber size: 9.6x7.3x4.1 m - Final moisture content: 10 +/- 2% Drying chamber Manufacturer: BigonDry Type: Mod.LEM96.73.41 Year of manufacture: 2021 Technical data - Number of chambers: 3 - Volume per chamber: 90 m3 - Chamber size: 9.6x7.3x4.1 m Hfodpfx Aezu Amaog Eon - Overall chamber dimensions: 10.2x7.5x5.4 m - Type of hardwood - Final moisture content: 10 +/- 2% - Drying package: 4.5x1.2x1.2 m - Substructure: Aluminum - Wall insulation: Aluminum cassettes plus 100 mm glass wool - Sliding door: Aluminum plus 100 mm mineral wool - Front unloading - Ventilation: 900 mm - Ventilation power: 3 kW - Nominal air volume: 36000 m3/h - Hot water temperature: 90-95 C - Heating capacity: 380000-190000 kcal/h - Roof fans: 2+2 - Spray water pressure: 80 bar - Intermediate ceiling: Aluminum - Inspection doors - Wind resistance: 110 km/h - Snow load: 200 kg/m2 - Control system: Fully automatic control unit VENUS 2500-24F-PRO - Noise level: 68-70 dBA - Digital sensors - Total power: 18.5 kW - Power supply: 400v/50Hz Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2014, Capacity: 100 + 30 L Hedpsz D Tvnjfx Ag Ejfn

Condition: good (used), Year of construction: 2012, Colortronic Dry-Flex M400 Granulate Dryer, Plastic Dryer For sale is a used granulate dryer, type Dry-Flex M400, manufactured by Colortronic. Technical details (according to the nameplate): Manufacturer: Colortronic, Friedrichsdorf (Germany) Model: Dry-Flex M400 Year of manufacture: 11/2012 Control panel: 6AV6642-0BA01-1AX1 Operating voltage: 400 V / 50 Hz Heating power: 33 kW Drive power: 5.5 kW Operating pressure: max. 6 bar Design: Granulate dryer / plastic dryer Hedjxlqztepfx Ag Esfn Application area: Plastic processing, injection molding, extrusion Condition: Used, functional Buy the Colortronic Dry-Flex M400 granulate dryer and other items at a favorable price – Here you buy goods from professionals for professionals – In our SHOP you will find more attractive offers. You can find more new and used items in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2022, functionality: fully functional, cooling capacity: 800 kW (1,087.70 HP), type of cooling: air, overall weight: 2,915 kg, total width: 2,140 mm, total length: 8,900 mm, total height: 2,200 mm, warranty duration: 6 months, Dry-cooler BlueBox (Refrion) EK4Y2680.4/2Q 800 KW Cooling capacity: 800 kW (40/35 — +25C) Year of manufacture: 2022 Fluid: Glycol + Water Number of fans: 12 pcs. Fan Diameter: 800 mm Volume: 428 dm³ Dimensions: 8.9 x 2.14 x 2.2 m. Weight: 2915 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Hfodpfx Agozwd Nhj Een Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.