* General * SKULR037 * LocationNederland * MakeImtech Drygenic (NL) * TypeVentilex * No.V135005 * Year of construction2013 * Material * MaterialStainless steel 1.4404 (316L) * Information * With switch * With switchgear * Weight12000 KG * CE * Extra SpecificationsImtech Ventilex drying plant includes a belt dryer with 2 fans and heat exchanger integrated into a 40 foot container. Product inlet distributor with feed belt and swing function. Air supply cabinet with filter unit, fan, heat exchange...
Description of the process of drying and regulation:
-The drying process of agro material such is hop, hemp, cereals and other commodities of vegetable origin is dependent on input moisture, size and fraction of material, required output moisture and acceptable admissible input temperature. The run of the whole system is control by central electric switchboard which is equipped PLC control unit that works with transferred data from sensors and thermocouples and in connection to these data adjust...
Dryer was used exclusively for commercial hemp.
Manufacturer's information: Due to its special design and air flow, this NEWtainer® can also be used for drying other products without extensive conversion measures: Grain, corn for grain, wood chips and many more.
LARGE FEEDER + FLEXIBLE BELT DRYER = ALLINDRYER®
With the ALLinDRYer® from NEW ECO TEC, Germany's leading manufacturer of compact belt dryers is setting new standards in drying technology and the efficient use of CHP waste heat. The d...
Radiant belt dryer with the possibility of chain transport.
Tunnel dimensions:
length 800 cm
width 210 cm
Gfgettexk
height 108 cm
Division into 4 segments of 200 x 210 cm.
Wall and ceiling housing made of 30 mm closed steel profile with a double-sided aluminum sheet wall filled with heat-insulating mat.
All housing walls consist of removable elements measuring 200 x 108 cm. Entrance and exit wall dimensions: 210 x 106 cm, tilting on top hinges with an automatic support, removable.
Heating b...
* General * SKULR040 * LocationBelgie * MakeZhejiang Shuangzi Industry Machining * TypeSUNZDG-04-30 * With switchgear * CE * Total height2.7m * Technical specs * Extra informationHeat exchange area 30m2 Water evaporation capacity 15-25 Kg/H Beltwidth 1155mm er 110 KW, 380 Volt, 50 Hz Diameter 1700mm, length 9800mm, height 2700mm General Drying device that is intented for liquid and paste like materials. This vacuum drying equipment is capable of continuously feeding and discharging these liquids...
We offer:
Brsgmfbsi2
Drum and belt dryers
We produce non-standard products:
Pellet lines from 500kg / h to 10t / h
Raw material feeds
Raw materials for mills and shredders
Conveyor
Coolers
Applicants
Packing machines
Sincerely,
Justinas Račka
2 pcs conveyor belt type W500
Centre distance 4000mm horizontal, then approx. 1,655mm rising by approx. 65degrees. belt width 490mm with TC-75 inclined cleats, corrugated edge 80mm, cleat spacing 150mm
PVC conveyor belt 3R 7-0 F green 490*11300mm endless
carrying side2*wave edges 80mm high free edge zone 100mm
Price for 1 pcs
Fkz9zdsg0
The SICAR CL2NRT wide-belt sander
Location
Gorzów Wlkp.
Conditions of delivery
Cost of delivery
to be agreed
Start type
to be agreed
Description
Comments
dwywałowa with a boot
one motor feeds two shafts
9bw7dkw
SPOT UV - EXCEPTIONAL CONDITION
CYLINDER SCREEN PRINTING MACHINE
Bi3lblocop
1990 - SVECIA MARATHON - SIZE B2
MAX PRINT 52 x 72 CM - 20 x 30 INCH
ALL MACHINES HAVE BEEN FULLY RECONDITIONED LIKE NEW
READY FOR SHIPMENT AND INSTALLATION
LOCATED NEAR PORTO PORTUGAL
IMMEDIATELY AVAILABLE
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers
-Diameter roller: 115 mm
-Transport roller width: 380 mm
-Total length: 420 mm
-Shaft recording: 40 mm
-Two square: 25 mm
-Number: 4x rolls available
Brd2yybk
-Price: per piece
-Weight: 12 kg/piece
band width 300 mm
Bmo3hmvg
band length 2000 mm
roll diameter 200 mm
turning speeds 1450 U/min
loading area 460 x 255 mm
Surface belt sander for metal
steplessly variable from horizontal to vertical
2 identical belt grinders in stock!
Technical data baler
Manufacturer Bollegraaf
Typ HBC 80 A
Year of construction 1997
Hours of operation 21,545 hours
Press power main press 78 tons
Press power of pre-press 42 tons
Feed channel 1,485 x 720 mm (l x w)
Filling volume 2,9 m³
Theoretic cycle time 22 sec.
Bale size 720 x 1,100 mm (h x w)
Drive power 45 kW
Connected load 60 kW
Tying system 5-fold, vertical, fully automatic
Throughput capacity at a
bulk weight of 20 kg/cbm approx. 9,0 tons/hour
bulk weight of 50 kg/cbm approx. 18,5 to...
Belt sander FLOTT type TBSM 75
belt length 1000 mm
belt width 75 mm
Belt speed approx. 7 m/sec
surface grinding table 280 x 80 mm
Engine power 0,37 kW
Engine speed 1370 rpm
mains connection 400 Volt, 50 Hz
Contact disc/drive disc Ø 100 x 75 mm
- Abrasive belt tension via handwheel
- Treadmill adjustment via hand wheel
Space requirement L x W x H 530 x 370 x 200 mm
Bhulqhwpfc
Weight 24,5 kg
Table dimensions 3000 x 1000 mm
throat 1000 mm
motor power 7,5 kw
sanding belt measurements 7800 x 150 mm
stroke of moving table 300 mm
working length 2600 mm
Gi0c9dpsm
Working width 150 mm
Length of sanding paper 7800 mm
Dust suction hood 180 mm
total power requirement 9,8 kW
* General * SKU021C037 * LocationBarneveld * MakeList AG Pratteln * TypeDTB-1000 Conti Discotherm * No.2524.01.01.01.2524 * Year of construction1991 * Material * MaterialStainless steel 1.4571 (316Ti) * Pressure * Working pressure0.5 Bar * Vacuum possible * Working pressure jacket7 Bar * Key Features * Paddle dryer(1x) * Continuous * Capacity1180 Ltr * Trough sizesdia. 750x3780mm * Outletvia "discharge screw DN80" * With jacket(75 Ltr) + 8 Ltr "Stirnseiten" * Shaft can be heated(278 Ltr) * Max. ...
Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, inclined conveyor
V3bjyt08
-Body: made of stainless steel
-Speed: 30 m/min
-Motor power: 0.37 kW/59 rpm
-Belt width: 390 mm
-Length: 2050 mm
-with driver: 325 x 150 mm
-Transport dimensions: 2100/800/H570 mm
-Weight: 160 kg
Second-hand machineCondition: according to ageTable size 2600 x 900 mmSanding length max. usable 2500 mmBelt length 7100 mm x 150 mm1100 mm cranking rightAvailability: short termLocation: Solingen
Bmw2cknah7
Adjustable belt grinder make FORMAT type BS 75
Technical data:
Bvzfswm9bw
Belt grinding length 2000 mm
belt grinding width 75 mm
power connection 380 V
with
- height adjustable grinding head
used, special price, as on stock
Bale press Europress 6100 V5, constructed 1999 / completely refurbished in 2011, press force 90 t, including chain belt conveyor Westeria
Technical data baler
Manufacturer Europress
Typ 6100 V5
Year of construction 1999 / 2011 completely overhauled
Hours of operation 66,156 hours
Press power main press 90 tons
Specific press capacity 97 N/cm²
Feed channel 1,450 x 1,100 mm
Filling volume 1.2 m³
Theoretic throughput capacity 400 m³/hour
Throughput capacity under operating conditions 320 m³/hour
...
Conveyor belt, trough conveyor belt, trough conveyor presumably BÖGER
Bdesc97ubj
* General * SKU107W548 * LocationBarneveld * MakeCMR Construzioni Metallurgiche Riunite * No.1771 * Year of construction1988 * Material * MaterialStainless steel 1.4435 (316L) * Pressure * Working pressure2 Bar * Vacuum possible * Working pressure jacket8 Bar * Key Features * Paddle dryer(1x) * Capacity4350 Ltr * Trough sizesdia. 1400x3000mm * Outlet± dia. 350mm * External heating spiral(265 Ltr) * Shaft can be heated(160 Ltr) * Max. temperature200 Degr. C. * With adjustable packing glands * Mot...
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers
3qpopd0vd
-Diameter roller: 80 mm
-Transport roller width: 490 mm
-Total length: 520 mm
-Shaft recording: 12 mm
-Number: 124x rolls available
-Price: per piece
-Weight: 2.3 kg/piece
Sanding width 1350 mm with electronic shoe
With 2 sanding units consisting of:
- 1 piece of calibration roller
- 1 piece of electronic shoe
- dust brush
- 1 drive motor 15 kW
second hand
Make Ott
Type Megatronik 13
Year of construction 1995
Machine no. E / 79026
Working width approx. 1350 mm
Passage height approx. 160 mm
CE-type tested
Number of units 2 pieces
Belt dimensions 1900 mm x 1380 mm
Feed speed 5/10 m / min.
1 piece of calibration roller fluted, rubberized, 90 Shore
Belt speed appr...
sanding wid
1 combi group
extension table for input and output
automatic feed centering
7pc2b2m
pneumatico on off roller
Table size 2000 x 800 mm
Belt speed 8-25 m/s
Table height adjustment 0 - 630 mm
Belt size 7100 mm
Floor space 3600 x 2000 mm
C2s7xbvk
Machine height 2650 mm
Useful width 1.100 mm
Length feeding belt 2.000 mm
Bvyezb9ylu
Length of ascending belt 7.000 mm
Height of drive axle above ground 5.000 mm
* General * SKU106N545 * LocationBarneveld * MakeDrais * TypeTR 1000 * No.49693 (Vessel 2602) * Year of construction1979 * Material * MaterialStainless steel * Pressure * Working pressure0 Bar * Vacuum possible * Working pressure jacket5 Bar * Key Features * Paddle dryer(1x) * Capacity1000 Ltr. * Trough sizesDia. 800x2000mm * InletDia. 360mm, * OutletDia. 160mm, Inspection valve 710x450mm * With jacket(100 Ltr.) * Shaft can be heated * With adjustable packing glands * Motor35 KW, 380 Volt (Ex), ...
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers
-Diameter roller: 90 mm
-Transport roller width: 740 mm
-Total length: 780 mm
-Admission: M10
Kin3htnb
-Number: 13x rolls available
-Price: per piece
-Weight: 6.4 kg/piece
With 2 sanding units consisting of:
- calibration roller
- Combination unit with running shoe
with a new feed carpet
second hand
Make Sandingmaster
Type CSB2-600
Machine no. 7612312
Operating hours 7805.45
Working width 600 mm
Passage height approx. 150 mm
Aggregates from above 2 pieces
Belt dimensions 630 mm x 900 mm
Feed speed 7/14 m / min.
1 piece calibration roller 7.5 kW
Diameter 250 mm
1 piece combination unit 7.5 kW with rubberized roller
Btmsqlapji
Air shoe
Required space approx. 160...
Length: 3300 mm
Band width: 400 mm
E3twgxpco
Belt: Rubber
Frame width: 550 mm
Drive: Onderaandrijving
This machine is built for the roughing and finishing on welded edges, corners and surfaces on flat and mid-size work pieces out of steel, stainless steel, and aluminium
Table size 4m x 1m
Belt length 11200 x 100 mm
Fully refurbished
Extraction can be supplied
Year 2007
Bim7rm39ss
Weight 2500 kgs
working width 1100mm
Bvxd0u9xvc
calibrating unit with steel shaft
kombi unit with rubber shaft
pneumatic activation from panel
pneumatic oscillation with photocells
pneumatic pad
* General * SKU154P727 * LocationBarneveld * MakeLödige * TypeVT-1200 * No.11614 * Year of construction1987 * Material * MaterialStainless steel 1.4571 (316Ti) * Pressure * Working pressure0 Bar * Vacuum possible * Working pressure jacket7 Bar * Key Features * Plough share dryer(1x) * Capacity1200 Ltr * Trough sizesdia. 950x1680mm * Inlet/top connections dia. 400 + dia. 600mm * Outletdia. 200mm * With jacket(80 Ltr.) * Max. temperature170 Dgr.C., Hydraulic drive * Motorhydraulic unit 75 KW, 380/...
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers
-Diameter roller: 80 mm
-Transport roller width: 495 mm
-Total length: 530 mm
-Shaft recording: 12 mm
3qpplxlrg
-Two square: 10 mm
-Number: 203x rolls available
-Price: per piece
-Weight: 2.6 kg/piece
Dear customers currently we offer a Profile belt sanding machine for model an mold making of the brand Zimmermann. Here are some technical datas:
B8ioyll7
Table length: 400 mm
Table width: 400 mm
Bar widths: 15/30/40 mm
Belt length: 1.985 mm
Belt speed: 25m/s
Sanding height: 220 mm
Table tilting up/down: 45/20 °
Voltage: 400V
Power: 1.1 kW
Speed: 2,800 rpm
Intake diameter: 54 mm
Dimensions: 620 x 840 x 1360 mm
Weight: 125 kg
We are looking forward to your questions and inquiries.
New belt grinding machine BERNARDO Type MS 75x2000 S
Bandwidth 75 mm
Band length 2000 mm
Belt speed 29 m/sec.
2rbuf3
Speed 2800 rpm.
Engine power 3 KW = S1 at 100%ED
Mains connection 400 volts, 50 Hz, 16 ampere CEE plug
Contact disc/drive disc of 200 x 75 mm
- Surface grinding table 75 x 460 mm with graphite base
- Hinged metal cover over the surface grinding table
- Contact disc with polyurethane flooring
- Safety switch with motor protection and undervoltage trigger
- Prepared for external suc...
Long belt sander
2t0ckxv
SCM LS 2500
400V, 10 Amp
Year of construction 2008
Max sanding width 2500mm
Electric high/low
Built-in suction
Extra sanding belts included
Catalog number 6191
TECHNICAL DATA
- length of the workpiece 2500mm
- workpiece width 800mm
- 4kW main engine
- table top length 2500mm
- table top width 800mm
- 160mm sanding belt width
Bvvxasfxow
- disc grinder, paper diameter 240mm
- fan
- diameter of the 180mm extraction connector
- overall dimensions length / width / height 3650x1580x1570mm
- weight about 800 kg
ADVANTAGES
- German production
- disc grinder
- fan
- unpainted
- used grinder, very good condition
Net price: PLN 5900
Net pri...
* General * SKU101Y787 * LocationBarneveld * MakeBuss-SMS GmbH Butzbach * TypeRovactor NCE-3800-CD/CF * No.51/3800 * Year of construction2000 * Material * MaterialStainless steel 1.4571 (316Ti) * Pressure * Working pressure2 Bar * Vacuum possible * Working pressure jacket16 Bar * Vacuum possible jacket * Key Features * Paddle dryer"Disc segments dryer" (1x) * Continuous * Capacity3950 Ltr * Trough sizesdia. 1060x4210mm * Inletdia. 250mm * Outletdia. 300mm * With jacket(75+215 Ltr) * Shaft can be...
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers
-Diameter roller: 65 mm
-Transport roller width: 820 mm
-Total length: 830 mm
9cfpuovyl
-Socket: Ø 11 mm
-Number: 21 rolls available
-Price: per piece
-Weight: 1.5 kg/piece
width 395 mm
length 2960 mm
output height 130 mm
efective widths 385 mm
Pole center 400 mm
drive motor Drehstrom
Dgd8j3xv
New belt grinder BERNARDO type MS 150x2000 SBandbandband width 150 mmBand length 2000 mmBelt speed 29 m/sec. speed 2800 rpm.Motor power 4 KW = S1 at 100펥tzanschluß 400 Volt, 50 Hz, 16 Ampere CEE-plug Contact disc/drive disc Ø 200 x 150 mm- Surface grinding table 150 x 460 mm with graphite underlay- hinged metal cover over the surface grinding table Contact disc with polyurethane coating- safety switch with motor protection- and undervoltage release with motor protection- and undervoltage release...
Mit 2 Schleifaggregaten bevertical aus:
- 1 Stk calibration roll
Bn0gn3roie
- 1 Stk combined aggregate with pneumatic sanding pad
- dust brush
used, good condition
manufactured by: Bütfering
type: Vega 211-SKC
built in: 1997
working width mm: 1100
passage height mm: 160
CE tested for type examination: Ja
number of aggregates: 2
band dimension 1 x b mm: 2150 x 1120
feed speed m/min: Stufenlos adjustable m/min
working width: 1100 mm
Ewctrrh
working height: 140 mm
min. Workpiece length:
height adjustment: elektrisch
read out Workpiece thickness: digital
units: 2
1. unit: Kombi Aggregat (Walze - Schuh) mit elektronischen Glieder-schleifschuh
2. unit: Schuhaggregat, elektronischer Segmentschuh
dedusting brush: ja
motor power: 2 x 15kW
electricity: 65A
suction connection: 4 x 200mm
machine length:
machine width:
weight: 3500kg
* General * SKU074Y443 * LocationBarneveld * MakeHaagen & Rinau * No.8803381 * Year of construction1984 * Material * MaterialStainless steel * Pressure * Working pressure0 Bar * Vacuum possible * Working pressure jacket3 Bar * Key Features * Turbulent dryer(1x) * Capacity63 Ltr * Trough sizesdia. 410x475mm * Inlet2x dia. 100mm + dia. 35mm * Manhole/inspection hatch 300x240mm * Outletdia. 200mm * With jacket(10 Ltr) * Max. temperature200/250 Degr. C. (vessel/jacket) * With adjustable packing glan...
Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers
-Diameter roller: 65 mm
-Transport roller width: 820 mm
-Total length: 830 mm
-Socket: Ø 10.5 mm
Dzbzvnyek
-Number: 3 rolls available
-Price: per piece
-Weight: 1.5 kg/piece
Technical data for the conveyor belt
Manufacturer Hunkeler Systeme AG, Switzerland
Type GGF 1000
Gdisvxbay
Year of manufacture 12/2018
Drive power 3 kW
Belt speed 0.3 m/second
Length ascending belt 6.800 mm, gradient 32°
Length of gooseneck 1,600 mm, gradient -22°
Effective width 970 mm
Transfer height 3,260 mm
Conveyor belt fitted with vulcanised carriers 40 mm high
Height of side wall of ascending belt, inside 810 mm
Transport dimensions 10,000 x 1,600 x 1,800 mm (l x w x h)
Weight approx. 2,5...
