Used Varnish Dryer for sale (1,862)

Condition: like new (used), Year of construction: 2012, Atlas Copco CD 70+ adsorption dehumidifier YOM 2012 Capacity: 4,200 l / min Pressure dew point: -40 ° C Pressure drop: 0.16 bar Maximum operating pressure: 14.5 bar Filter sizes: DD / PD 60 - DDp 60 Weight: 120 kg Dimensions: 550 (L) × 364 (W) × 1479 (H) mm inlet air temperature: 35 ° C ambient temperature: 25 ° C operating pressure: 7 bar Cedpoyzaamjfx Agrehd

Condition: like new (used), Year of construction: 2021, Kaeser Secotec TE 142 Refrigeration Dryer YOM 2021 Serial number: 149-8393351 16 Bar 3-60 degrees C Refrigerant R513A Flow rate: 14.50 m3/min - 14500 l/min Total width: 712 mm Total length: 982 mm Total height: 1,612 mm Csdpfxsyy U I Nj Agrehd Overall weight: 249 kg Kaeser compressed air dryers ensure dry, optimal compressed air for all flow rates. Built as high-quality industrial machines, they reliably protect your system and processes from condensation damage, even under extreme conditions.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Parameters: - length: 12,9 m - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Csdpfx Agjzg Iw Iorshd Hot water 90°C More technical details available on demand. On site inspection and testing are possible.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed and dimensioned according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feeding modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, Chsdpfjzw Apgjx Agrsd 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW thermal, installed electrical power 690 kW electrical. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow rate at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the outlet of the discharge duct and the dryer. The dryer is designed for an ambient temperature of up to -40°C; the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The furnace is NOT included in the offer; we only sell the belt dryer! The working level of the dryer is supported by steel columns approximately 8.00 m high and is enclosed with thermally insulating sandwich panels. A hall or other production components can be placed under and between the columns (see documents, steel structure). The system has been disassembled and stored by an experienced assembly team; this team can be arranged for transport and reassembly. Please note: We only sell this belt dryer without a furnace and no other parts! Please send your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, Year of construction: 2018, The Airtec ATC 7.5 Screw compressor and air dryer Heavy-duty industrial compressor. Specifications Year 2018 Motor Power: 7.5 KW (10HP) Maximum Pressure: 8 bar Free air delivery 1.1 m3/min Tank Capacity Options: 500 Litres Chedpozf Ivusfx Agrjd Power Requirements: 3-Phase Electric Pump Type: Belt-driven, cast-iron piston

Condition: used, Scott AST Air Swept Tubular Dryer Flash Drying of Filter Cakes, Powders and Granules. Model 5418 Dryer complete with feeder, air heater and exhaust fan. 110 kW vee-belt drive Feed Screw with agitated feed hopper. 3.4 MW LPG fired air heater with combustion chamber. Adjustable paddles to control retention time. Large access doors for ease of cleaning. Exhaust fan with 90 kW vee-belt drive. Airflow : 30,000 m3/hour Equipment is offered in "as is" condition with no warranty given or implied. PPDS can offer full refurbishment services. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed clients expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Codpezvgiuofx Agrehd Please check out our other listings and subscribe to our stock list.

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Cjdjy R Tdwepfx Agrshd

Condition: used, Year of construction: 1998, Used ultrat​​roc SD 0630 refrigerant dryer from ultrafilter for drying compressed air. The unit was manufactured in 1998 and features an integrated condensate drain. Manufacturer: ultrat​​roc GmbH Drucklufttechnik / ultrafilter Type: SD 0630 / 914 Year of manufacture: 1998 Max. permissible pressure, compressed air side: 16 bar Max. permissible pressure, refrigerant side ND/HD: 16 / 20 bar Max. permissible temperature, compressed air side: 60 °C Permissible ambient temperature: +2 to +50 °C Operating voltage: 230 V Phases: 1/N Frequency: 50 Hz Cjdpfo Ahy Nwsx Agrjhd Rated power consumption: 1.130 kW Protection class: IP20 Refrigerant: R134a Max. refrigerant charge: 1.250 kg Max. fuse rating: 16 A Features: Condensate drain

Year of construction: 2019, condition: excellent (used), BINDER FD 720 laboratory dryer – 2019 – Very good condition We offer a BINDER FD 720 laboratory dryer from 2019, manufactured by the renowned German company BINDER GmbH. The unit has been used very little and is in very good technical and visual condition. The internal chamber, made of stainless steel, is clean and well-maintained, and the housing shows only minimal signs of use. The FD 720 model is a professional laboratory dryer with forced air circulation, designed for drying, heating, and heat treatment of materials in laboratories, industry, and research institutions. Technical data * Manufacturer: BINDER GmbH, Germany * Model: FD 720 * Year of manufacture: 2019 * Chamber volume: 720 liters * Maximum temperature: 300°C * Air circulation: forced, fan-assisted * Rated power: 4.50 kW * Power supply: 400 V, 50–60 Hz, three-phase * Rated current: 16 A * Temperature protection class: 2.0 according to DIN 12880 * Degree of protection: IP20 * Serial number: 20190000016313 * Country of origin: Germany Key advantages * Large working chamber with a capacity of 720 liters * Forced air circulation ensuring uniform temperature distribution * Electronic temperature controller * Stainless steel interior * Adjustable shelf positions * Overheat protection * Robust industrial design * Very good visual condition and minimal signs of use Condition of the unit The dryer is from 2019 and has been used very sparingly. Codpfx Ao Ah Sr Segrjhd The unit is complete, well-maintained, and in very good condition, as confirmed by the attached photos.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals Cedpfx Ageq Igyvsrohd - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm Chsdorp D Uxjpfx Agrjd height: 2000mm weight: 4400 kg

Year of construction: 2004, condition: ready for operation (used), machine/vehicle number: 12800/280.2005, The device is made of stainless steel, is in good working order, and is stored in a dry and warm hall. Technical documentation is available in paper form, in German and English. Chodpfxj Ahgp Rj Agrod Key technical data is provided below: Drying drum diameter: 1200 mm Electrical heating power: 84 kW Drum length: 4000 mm Drum rotation speed: Continuously adjustable Drive motor power: 0.75 kW Extrudate drying capacity: 240-550 kg/h Description: The system offers highly efficient infrared drying through the use of electro-quartz elements – radiators made of high-quality quartz glass and coated with a gold reflective layer. The drum rotates on silent support rollers, the system meets safety requirements, and reduces energy losses. Heating radiators are available, currently disassembled.

Condition: good (used), Year of construction: 2015, Atlas Copco Oil Free Screw Compressor with built-in Air Dryer Model SF2+FF 7.75 bar / 112 PSI Year 2015 400 volts three phase, 2.2 KW / 3 HP, 2885 RPM 8.9 CFM / 4.21 lts/s Cjdsy Iplfspfx Agrehd Very little use Ex Pharma Facility

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, overall weight: 800 kg, power: 19.5 kW (26.51 HP), tank capacity: 200 l, volume flow: 350 m³/h, Dry air dryer with granular material silo and material separator Manufacturer: Piovan Type: DSN521NE No.: ODE 6242 Chjdox Na Itjpfx Agred 4 insulated granular material silos, each with a capacity of 200 L Equipped with an additional heater Material separator, 3 units Manufacturer: Colortronic This system has been inspected for all functions and is fully operational! PRICE REDUCED FROM 6200 TO 5500 EUR!!!

Condition: refurbished (used), Year of construction: 2025, 2 × KC 1/65H Drying Chambers + Boiler House Complete industrial timber drying facility consisting of two KC 1/65H drying chambers and a steel-frame boiler house building designed to accommodate the heating equipment for the drying process. The boiler house structure has dimensions of approximately 9.3 × 10.6 m and is constructed from steel columns, truss roof girders and insulated sandwich panels. The sale includes: 2 × KC 1/65H timber drying chambers Capacity approx. 88 m³ of timber per chamber RSU control units Transfer mechanism Mechanical and electrical kiln equipment Codpfxj Ah Sxuo Agrshd New kiln roofs Steel boiler house building with insulated sandwich panel cladding Supporting structural steelwork and roof construction The drying chambers operate with a hot-water heating system (90/80°C), feature five reversible fans per chamber, and are suitable for drying sawn timber, hardwoods and softwoods. Suitable for sawmills, timber processors and wood-product manufacturers looking for a complete industrial drying solution with its own boiler facility.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, operating hours: 500 h, Equipment: CE marking, documentation/manual, FrostX 50 Freeze Dryer – 2026 – Very Low Operating Hours Csdpfe Agpgmex Agrehd For sale is a FrostX 50 freeze dryer, manufactured in 2026, from our food processing business. The machine was delivered in May 2026 and has only been used for a limited number of production and test runs. It is in very good condition and fully operational. Equipment / scope of supply: - FrostX 50 freeze dryer - Year of manufacture: 2026 - Very low operating usage - Original product trays - Tray transport cart - Silicone mats - Manufacturer documentation and operating instructions available The unit is suitable for freeze-drying food products and other suitable materials. Further technical specifications are available in the manufacturer documentation. The machine can be inspected and demonstrated by appointment. Reason for sale: Reorganisation of our production concept as part of a planned capacity expansion. Price: EUR 34,900 net, negotiable Location: Germany Loading can be organised or assisted by prior arrangement. Transport can be arranged by the buyer or discussed individually. Further photos, technical documentation and additional information are available upon request for serious enquiries.

Year of construction: 2012, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 363/15862010, The rotary bed dryer WB-T (model 1.00 / 3.00) from Allgaier Process Technology GmbH is a specialized industrial plant for the continuous, uniform, and gentle drying of bulk materials and biomass. In process engineering, the model designation (1.00 / 3.00) typically refers to the dimensions of the drying area, i.e., a bed width of 1.00 meter and a bed length of 3.00 meters. The heating capacity is 250 kW and is powered by electricity. Typical applications: • Biofuels & wood industry: Drying of wood chips, sawdust, and bark for pellet production. • Waste management • Agricultural & recycling industry: Processing of fermentation residues (from biogas plants), green waste, sugar beet pulp, or bagasse. Operating principle: The technology combines the process engineering advantages of a drum dryer with those of a fluidized bed dryer: • Rotary bed mechanism: The wet product lies inside on a perforated flow bed (perforated sheet). A targeted mechanical movement or tumbling in combination with the airflow creates a rotating or rolling product movement ("rotary bed"). • Counter-current or cross-current ventilation: The drying air is blown from below through the sieve bed and flows intensively through the tumbling product. This ensures an optimal heat and mass exchange. Cjdpfxsz Rz Dnj Agrjhd Main features & advantages: • Low-temperature drying: The plant is ideally designed for operation with waste heat or low-temperature heat sources (e.g., from combined heat and power plants/CHP or industrial residual energy). • Long residence time: This enables particularly gentle dewatering of the material while simultaneously ensuring high homogeneity of the residual moisture. • Robust particle processing: In contrast to pure fluidized beds, large, irregular, or sticky particles can also be processed economically. • Integrated screening: The flow effectively reduces fine dust and sand content during the process.

Condition: used, Year of construction: 2016, Two used, air-cooled compressed air refrigeration dryers in good external condition, with inspection labels valid until 2025. Manufacturer: Ingersoll Rand Model: D1890EC-A Series: D-EC Premium Efficiency Machine type: Compressed air refrigeration dryer Year of manufacture: 2016 / 2017 Air flow rate: 31,500 l/min (1,890 m³/h) Chsdpj Ahyn Djfx Agrod Electrical power: 6.79 kW Voltage supply: 400 V / 3 phases / 50 Hz Refrigerant: R407C Refrigerant charge: 4.2 kg Maximum air inlet pressure: 13 bar Maximum refrigerant pressure LP/HP: 18 / 29 bar Air inlet temperature: +5 to +60 °C Ambient temperature: +2 to +45 °C Sound pressure level: 78 dB(A) Connection size: 3 inches Control: Electronic control with digital display Cooling: Air-cooled Condition: Used, good external condition Inspection: Inspection labels valid until 2025 are available Available quantity: 2 Location: Rehweiler

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, new KAESER SXC6 screw compressor system (10 bar) available immediately with integrated refrigeration dryer with 215 liter compressed air tank with electrically level-controlled condensate drain with Sigma Control 3 control Year of construction: 2026 Operating hours: 0.5 operating hours Technical data: Volume flow at 10 bar: 0.49 m³ / min Nominal power drive motor: 4.0 kW Electrical supply: 400 V / 3 ph / 50 Hz Dimensions W x D x H in mm: 620 x 980 x 1480 Cedpfxo Ah S Ezs Agrjhd Weight: 290 kg Compressed air tank: 215 liters Compressed air connection: G 3/4 " Sound pressure level: 69 dB (A) Refrigeration dryer pressure dew point: 6 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: used, Year of construction: 2019, Format: 2000 x 950 mm Equipment: Electric Modular Dryer Forced Hot Air System dimension 3800 x 1250 x 2170 mm POWER 15 kW 27 A weight 650 KG Chjdjyzruiepfx Agrjd

Condition: excellent (used), functionality: fully functional, Granulate dryer with two drying containers, including KOCH material conveying equipment and suction lance. For sale is a used drying system for plastic granules with two drying containers and associated material conveying equipment. The system was used at an injection molding company for pre-drying PA6. Equipment and scope of delivery: - Two insulated drying containers on a common steel frame - One KOCH-TECHNIK vacuum conveying unit mounted on each container for material feeding - Large side cleaning openings with a sight glass for level monitoring Chedpfxo Afb Als Agred - Material outlets at the bottom of the containers - Analog temperature indicators at the air connections - Separate drying unit with fan, filter, and control cabinet - Digital temperature controller GOSSEN D1 - Control panel with operating and fault indicators, as well as indicators for drying and regeneration - Existing air piping and connecting hoses - Suction lance with conveying hose The side cleaning openings provide good access to the inside of the container. Drying containers and drying unit are mounted on separate steel frames. Condition: Used, with visible signs of wear and tear due to age and use. Scope of delivery as described and shown in the pictures.

Condition: ready for operation (used), functionality: fully functional, working width: 1,300 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, No minimum price – guaranteed sale to the highest bidder! The auction includes: CEFLA FEV E dryer: LAMINAR AIR DRYER (ECOGEL E4/5), Type: SP-FEV E - 90 kW CEFLA FEV EU dryer: AIR METER DRYER (AQUADRY LA/5), Type: SP-FEV EU - 110 kW CEFLA cooling zone: AIR METER COOLING ZONE (AQUADRY RLA/2), Type: SP-FEV RU CEFLA TR 3000 roller conveyor CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5), Type: SP-FEV E - 90 kW Note: The paint booth shown in the video is not included in the scope of sale and delivery. TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Passage usable height: 80 mm Fan flow rate: 40,000 m³/h Codpfx As Ah Rfrsgrohd MACHINE DETAILS Control: LCD 5.7” touch control panel Dimensions (L x W): 7,500 x 1,783 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan CEFLA FEV EU dryer: AIR METER DRYER (AQUADRY LA/5), Type: SP-FEV EU - 110 kW TECHNICAL DETAILS Working width: 1300 mm Maximum drying height: 1780 mm (excluding conveyor) Passage usable height: 80 mm Fan flow rate: 40,000 m³/h MACHINE DETAILS Control: LCD 5.7” touch control panel Dimensions (L x W): 7,500 x 1,783 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h EQUIPMENT VS spark-proof supply/recirculation fan CEFLA cooling zone: AIR METER COOLING ZONE (AQUADRY RLA/2), Type: SP-FEV RU TECHNICAL DETAILS Usable width: 1,300 mm Passage usable height: 80 mm Maximum tunnel height: 1780 mm (excluding conveyor) Maximum speed at the air meter outlet: 32.5 m/sec Supply and recirculation fan power: 3 kW Exhaust fan power: 1.5 kW Supply and recirculation fan flow rate: 6,000 m³/h Exhaust fan flow rate: 6,000 m³/h MACHINE DETAILS Control: LCD 5.7” touch Dimensions (L x W): 3,000 x 1,783 mm EQUIPMENT TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats CEFLA TR 3000 roller conveyor MACHINE DETAILS Overall length: 3,000 mm EQUIPMENT Photoelectric sensor for thin panels, thickness 4 mm

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 12800/283.2005, The unit is made of stainless steel, is in good working order, and is stored in a dry and warm hall. Technical documentation is available in paper form in German/English. Key technical data is provided below: Drying drum diameter: 1200 mm Electric heating power: 84 kW Drum length: 4000 mm Drum rotation speed: Continuously adjustable Chjdpfx Age Agftferod Drive motor power: 1 kW Extruded material drying capacity: 240-550 kg/h Description: The system offers highly efficient infrared radiation drying, thanks to the use of electro-quartz elements – radiators made of high-quality quartz glass and coated with a reflective layer of gold. The unit is made of stainless steel, and the drum is coated with a PTFE layer, ensuring the processing of exceptionally sticky, coated extruded materials. The drum moves on silent support rollers; the system meets safety requirements and reduces energy losses.

Condition: excellent (used), machine/vehicle number: 00 06 028/00 0026 S, functionality: fully functional, Desiccant air dryer Manufacturer: Motan Chsdpfx Agoyvfkrjrod Type: Luxor LA/8-200 Connection value: 6 kW Dry air flow rate: 200 m3/h Silos for granules: 1 x 150 L 4 x 60 L Material conveying equipment: Manufacturer: Motan Type: HLX-06-1-A000-0 5 units PRICE REDUCTION FROM 6750 TO 6000 EUR!!!

Condition: like new (used), Year of construction: 2019, Used belt dryer New eco tec Model Woody 500-100-1.0 SP Chjdpfx Agevrd Uqjrod Produced in 2019. Like new.