Used Dry Tunnel for sale (3,408)

Condition: used, 4 chambers with dry steam, glass doors, Rcodpfx Ahoxytq Tocef suitable for this Number available (price per tank): 1 electrical power supply kW: 5 Sleevetunnel chambers: 4 Strom / Volt: 400

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders Rcjdpfx Ahsx R D Efocof ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Year of construction: 2007, operating hours: 15,215 h, condition: used, Transmission: Automatic Power: 280 kW (381 HP) Empty weight: 50.000 kg Rjdpfx Aex R T Dqjhcecf Please contact Emal Jaweed for more information

Condition: excellent (used), Year of construction: 2016, operating hours: 23,511 h, functionality: fully functional, Water-cooled dryer Atlas Copco FD510 30.60 m³/min Year of manufacture: 2016 Rcedpfxox Sx U Ds Ahcjf

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley with in- and out-swing gates with control system and electrical control cabinet Rodpfx Aswxdqkehcocf Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Condition: used, functionality: fully functional, machine/vehicle number: D20E/7694, Offer Number: D20E/7694 Machinetype: multiple wire drawing machine - dry Make: SKET / MILL Type: 8 BLOCK Constr. year: inlet wire diameter: 6,5 mm finished wire diamter: 1,6 mm number of drafts: 8 Rsdpjwi S Ixsfx Ahcecf diameter of capstan: 550 mm and 650 mm speed -meters/sek: 8-12 Location: Europe

Condition: used, Year of construction: 2018, operating hours: 234 h, functionality: fully functional, fuel type: electric, drive type: Elektro, Scrubber-dryer Condition: Ready for use and fully functional Technical condition: Good Rsdpfxjwkk T Ae Ahcecf Description: Battery. Year of manufacture: 2023

Condition: used, Spraying the full product with cold water to cool it down to approx. 40 °C. Allows clean labelling and creates a vacuum in the bottle. With cooling tower for recooling the spray water from the tunnel cooler with recirculation. Rcodpfx Aow Tmpdohcof Additional title: full product cooler, with splash water recooling Capacity of filling line: 5000 bo/h Features: Cooling tower for spray water recooling with circulation (Richter Cooling Systems, 2015)

Condition: used, KAESER TAH 6 Refrigeration Dryer - used - ----- Technical Data ----- Maximum pressure: 16 bar, Power supply: 230 Volt Rcsdpfxswzifls Ahcef

Year of construction: 2021, condition: used, Claw vacuum pump Dry-running Rcsdpfehmbkhjx Ahcof Manufacturer: Edwards Type: EDC 150 V Pumping speed: 150 m³/h Ultimate pressure: approx. 50 mbar (abs.)

Condition: new, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through Rcjdpeu T Hrvsfx Ahcof -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Air flow rate l/min: 1200 l/min - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: excellent (used), Wood dryer from the Italian company OS PANTO 4 chambers – each: - width: 16.9 m - length: 13.5 m - gate height: 5.9 m Batch capacity per chamber approx. 270 m³ Rjdjyw H H Ejpfx Ahcocf Complete with full documentation, automation, ALENT control software

Condition: used, functionality: fully functional, power: 250 kW (339.91 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 390 l, operation weight: 39,000 kg, maximum load weight: 14,000 kg, tire condition: 100 %, emission class: euro3, shovel volume: 6.4 m³, digging bucket width: 2,800 mm, Year of construction: 2013, Front axle load: 19,115 kg Cab: ROPS/FOPS-certified Fuel tank capacity: 390 liters Brake: SAHR (spring-applied, hydraulically released) multi-disc wet brakes on each wheel Turning circle (outer): 7.508 m Transmission: Dana Series T40000, 4-speed powershift transmission with torque converter Turning circle (inner): 4.015 m Maximum speed: 26.9 km/h (in 4th gear) Rear axle load: 18,885 kg Maximum torque (at 1,350 rpm): 1,674 Nm Weight: approx. 39,000 kg Output (at 2,100 rpm): 250 kW / 355 HP Engine manufacturer: Cummins QSM11 EPA Tier 3/EU Stage IIIA Bucket capacity (heaped): 6.4 m³ Breakout force (mechanical): 18,420 kg Breakout force (hydraulic): 22,300 kg Payload capacity: 14,000 kg Rjdpjxpww Ajfx Ahcocf

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. Rcodpfx Ahjyb Rpdscof The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: excellent (used), mytron 160 K CO2 Dual Incubator The CO2 incubator 160/160K ensures that cell and tissue cultures growing in vitro experience environmental conditions that closely mimic the physiological values ​​of the organism. Rsdsyfq U Iopfx Ahcscf mytron 160 K CO2 Dual Incubator The CO2 incubator 160/160K provides in vitro growing cell and tissue cultures with environmental conditions that closely resemble the physiological values ​​of the organism. Interior volume: approx. 160 l Weight: 70 kg Air circulation: via fan Cooling: refrigeration unit Temperature display: setpoint and actual value display Temperature range: 5 °C above room temperature to 70 °C Temperature range (cooled): +15 °C to 70 °C at 23 °C ambient temperature Temperature stability: +/- 0.2 K over time Humidity display: setpoint and actual value display Humidity range: ≥95% Humidity stability: +/- 2.5% CO2 display: setpoint and actual value display CO2 range: 0% to 20% CO2 CO2 stability: +/- 0.2% CO2 CO2 recovery time: 1% CO2/min Power supply: 230 V, 50 Hz, 2 x 8 amps W x H x D = 130 x 85 x 70 cm Financing through our bank is also possible. komplett-konzept.leasingo.de Buy incubators and other products at great prices - Here you'll find products from professionals for professionals - Find more attractive offers in our shop

Condition: good (used), Year of construction: 2000, Colortronic CTT 30 Granule Dryer For climate- and air-independent drying of thermoplastic granules and regrind prior to processing, removing residual moisture from both the inside and outside of the granules. Colortronic dry-air dryers operate according to the absorption principle. Instead of heating the air, the moisture is absorbed and removed in the drying hopper. Operating voltage: 400 V Control voltage: 24 V Power: 3.5 kW Main fuse: 25 A Year of manufacture: 7/2000 Find more items - new and used - in our shop! International shipping costs on request! Rjdpfoxlrdcox Ahcecf

Year of construction: 2004, condition: used, Koch dryair tanks 1x100 L 1x200 L 1x400 L with auxiliary heating Regulator Rcedpfexltdwox Ahcef Art.-Nr.: 2294 year: 2004 price: 7.400.00 contact: Mr. Rainer Eckerle

Condition: good (used), Year of construction: 2013, Kaeser TAH7 Refrigeration Dryer Compact, fully automatic, air-cooled compressed air drying system. Redpfxswhvqzs Ahcocf Flow rate: 0,60 m³/min

Condition: good (used), Batch dryer dryer Aeromatic Strea 30 fluidized bed dryer batch dryer Rsdpfewyf H Nox Ahcocf Stainless steel version Complete with control cabinet and accessories (operation unknown) Total height +/- 3 meter Equipped with nozzle device Suitable for drying and coating Fan power 5,5kW 62000 kcal/h See our other advertisement VMA Wekerom

Condition: good (used), Year of construction: 2017, ESC Screen Printing System 1100-2C/IR with IR Dryer Rcodpfx Aheyrm Hyecsf Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Rated power: 76 kW (nameplate Perfection) Protection class: IP40 Belt type: IR temperature tunnel with conveyor belt (width as per series: 1100 mm) Assembly: IR drying unit for screen printing or coating processes Design: Enclosed safety housing with access doors Application area: Drying/cure of printed or coated components Location: Schierling Inspection possible by appointment.

Condition: good (used), Year of construction: 2010, Internal item no.: 26046 Granulate drying plant + Multi-hopper system SOMOS D200 Year of manufacture: 2010 10x hopper Including electrical wiring diagram and operating manual Rjdsy R Rumopfx Ahcocf

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 6.2 kW (8.43 HP), input voltage: 400 V, input frequency: 50 Hz, temperature: 150 °C, total length: 600 mm, total width: 950 mm, total height: 2,000 mm, overall weight: 150 kg, number of chambers: 1, control type: CNC control, Equipment: CE marking, documentation/manual, Tank capacity: 100 litres Heating capacity: 4.5 kW Rcedpfx Aoy N T Utshcjf Blower output: approx. 0.85 – 0.95 kW Total power: 6.2 kW Airflow: 90 m³/h Maximum drying temperature: 150 °C Operating voltage: 400 V / 50 Hz Transport height: up to approx. 3000 mm Unit weight: approx. 130 – 150 kg Dimensions (W x D x H): approx. 950 x 600 x 2000 mm 3 units available Price: 1,350 EUR / unit

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 87, functionality: fully functional, EBERL vacuum dryer, manufactured in 2004. Rcjdjy Uc I Hepfx Ahcjf Underwent a major overhaul in 2024, performed by Eberl (purchased directly from Eberl). Fully operational, complete documentation available.

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 355 kg, total length: 2,000 mm, total width: 1,300 mm, total height: 1,800 mm, The AVIKO 60100 G3 DRY ADVANCED detects flaws on steel balls with diameters ranging from 60 to 100 mm. Customers can control the system via the PC/PLC and its intuitive HMI, with access to software statistics, protocols, sorting history, video manuals, and direct connection to the machine monitoring software Precision Viewer. All primary movement elements are driven by compressed air or electric motors. The Advanced model is equipped with advanced eddy-current probes and incorporates the eddyvisor C instrument for precise crack detection. For operational efficiency, a loader and outlet holder are included as standard features. For more details please visit our website. Rodpfxsy H Dmbe Ahcscf

Condition: excellent (used), Vötsch Rcjdpozg Tppefx Ahcjf Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosive limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity / payload Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Enhanced recirculation air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (ATS) adjustable above the rated temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (ATS): 2 Rated temperature: 200 °C Electrical data Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.