Used Cyclone for sale (233)

Year of construction: 1994, condition: ready for operation (used), Motor power: 37kW, rotor diameter: 500mm, rotor width: 790mm, cross-section: approx. 500mm/790mm, stator blades: 2-row, rotor: 6 blades left and right. Including cyclone, pipes, blower, 3 sets of knives and sieves with a diameter of 6mm/8mm/10mm. Grinding capacity: 6 sieve: 150kg/h, 8 sieve: 300kg/h, 10 sieve: 400kg/h. Documentation available. On-site inspection is possible. Ihjdpfxsui R Rce Ahvew

Condition: ready for operation (used), Year of construction: 2011, A complete pasta line with 2x Cappelletti forming sets is available. 1) Pasta Technologies Group SRL dosing and mixing unit for pasta ingredients such as flour, water, and micro-ingredients. 2) Combined mixer-sheeter Pasta Technologies Group SRL MASA 540, year of manufacture: 2022, dough sheet thickness range: 7mm–8mm, dough sheet width: 540mm, corrugated rollers: 3, pairs of smooth rollers: 1. 3) 2x forming machines GEA/Pavan MRW 540, year of manufacture: 2011, pasta types: Ravioli/Cappelletti, production output Ravioli/Cappelletti: 140/120 strokes/min, dough sheet width: 540mm, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1300mm, weight: approx. 1200kg, filler frame weight: approx. 210kg. Includes 2x Cappelletti tools 3D. 4) Double conveyor belt and waste recovery unit. 5) Dough scrap return system Pasta Technologies Group SRL RS100 with cyclone. 6) Complete system control and management by Pasta Technologies Group QEHD. Documentation available. An on-site inspection is possible. Iedpfx Ahjw Dfgkjvjhw

Condition: new, Year of construction: 2026, Consisting of large bale breaker Type MHB and straw shredder Type MHZ 1) Bale Breaker MHB: Special price from €22,975 net (lead time approx. 15 weeks) Suitable for round or square bales. Includes frequency converter (FU) – regulates the speed of the chain conveyor. The bales are placed on the chain conveyor, and the milling advance is activated. The milling tines tear the straw from the bale and hurl it into the hopper. Ideally, the combination of bale breaker and straw shredder is recommended here. Technical data – Bale Breaker: Performance: 1–2 bales per hour Up to max. 600 kg per hour (depending on screen size used in the straw mill and kW rating of the straw mill). Without straw mill, the bale breaker can process up to max. 900 kg/h straw. Max. square bale size: 2400 x 1200 x 800 mm (L x W x H) Milling motor: 5.5 kW, 380 Volt Chain conveyor feed: 0.75 kW, 380 Volt Dimensions: 3750 x 1730 x 2460 mm (L x W x H) Weight: 400 kg 2) Straw Shredder MHZ 600 – 11/15 kW; available immediately Special price from €6,995 net Surcharge for even larger straw shredder (18.5 kW): + €3,940 net Technical data, MHZ with special hopper: Motor: 15 kW, 380 Volt electric motor Diameter: 600 mm Hardened cutting knives Isdpfx Aob Nulhshvohw Screen with interchangeable inserts; selectable perforations (10, 12, 15, 22, 30, 45 mm) With star-delta switch, phase protection, and 8 m power cable, plug-in ready Discharge nozzle: 160 mm Blowing distance approx. 12 m Dimensions: approx. 1600 x 1020 x 1360 mm (L x W x H) Weight: approx. 240 kg --- Optional extras for a surcharge: Feed auger: + €970 net Cyclone (suspension by customer on site; should be no more than 10 m away): + €2,970 net Simple filter: €1,750 net --- Further options: Industrial extraction system (demonstrator): + from €9,950 net Optional rotary valve (renders material pressureless): + €5,750 net Control panel: from €1,620 net Special breaker extension 3 m (other sizes on request): + €9,750 net Briquetting press MPP 180 S; little used demonstrator 70 mm briquette – up to max. 100 kg/h from €39,700 net * Larger machines available on request --- Description: muetek bale breakers are designed for breaking up round and square bales of hay and straw. The shredder flanged to the bale breaker shreds straw from all types of cereals, hay, maize, and miscanthus. muetek machines of the MHZ / MHB series are characterized by robust construction and heavy-duty build quality. muetek MHB series bale breakers feature a chain conveyor onto which the straw bale can be placed using a front loader. The support surface is adjustable depending on bale type. The chain conveyor pushes the bale against the milling rotor. The feed speed is adjustable. The milling rotor is equipped with several teeth that tear open the straw bale. The separated straw is discharged. --- The machines are generally suitable for dry input material: - Straw - Hay --- Breaking up hemp bales is possible only with a special breaker (surcharge approx. €9,720 net, depending on configuration). Straw mill is not suitable for hemp processing. Requirements for input material: Max. moisture content 12%

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT3080 Main motor power: 30 kW Hydraulic system motor power: 2.2 kW Working rotor length: 800 mm Rotor diameter: 300 mm Number of movable knives on the rotor: 46 pcs Ihsdpfx Aheq Sp Hpovjw Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece Hydraulic system equipped with an oil cooling system External bearing The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 94 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Ihsdpsq Sp Ensfx Ahvsw Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT4080 Main motor power: 37 kW Hydraulic system motor power: 2.2 kW Working rotor length: 800 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 46 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Iodpfxeq Sp D Ue Ahvohw Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 32,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,850 mm, brakes: engine braking, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 14 m³, loading space length: 6,000 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, steel body, integrated toolbox, 1x comfort seat, 1x bunk, seat heating, rear window, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, navigation system, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, fog lights, work lights, beacon, pendulum flaps, roof hatch, green environmental badge Wheelbase: 4,850 mm Body: Meiller three-way tipper body with chute approx. 14 m³ 8 t front axle, rear axle banjo 440 hypoid 13 t, electronic braking system with ABS and ASR, disc brakes with partial protection front and rear axles, electronic parking brake, condensate monitoring for compressed air system, front axle stabilizer, supplemental stabilizer for rear/trailing axle, aluminum front underride guard, seatbelt control, 1x lower bunk, residual heat utilization, additional hot water heater, extra thermal insulation, PSM 2nd generation, reverse warning system, illuminated Mercedes star, ClassicSpace, comfort central locking system, light and rain sensor, driving mode economy/power, Mercedes PowerShift 3, navigation system, MultimediaCockpit Interactive, pre-setup for toll collection, LED daytime running lights, high-performance engine brake, cyclone pre-filter for coarse dust, safety pack, ESP, lane keeping assist, distance control assist, attention assist, traffic sign assist, Active Brake Assist 5, driver airbag, rear engine PTO with hydraulic pump ISO 7653D. Frame length approx. 6,800 mm! Frame height approx. 1,100 mm! Iedpoyhrawofx Ahvohw New vehicle from stock with day registration on 16.12.2025! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT40150 Main motor power: 90 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1500 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 94 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Iedpfx Ahjq Sp Ekjvshw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Ihjdjq Sp D Repfx Ahvew Model: WT4080 Main motor power: 37 kW Hydraulic system motor power: 2.2 kW Working rotor length: 800 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 46 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT4080 Main motor power: 37 kW Hydraulic system motor power: 2.2 kW Working rotor length: 800 mm Rotor diameter: 400 mm Number of movable knives on the rotor: 46 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, the possibility of mounting a second row of fixed knives (upper) depending on the processed waste Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Iodpeq Sp Ecofx Ahvohw Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2024, The subject of sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT3080 Main motor power: 30 kW Hydraulic system motor power: 2.2 kW Working rotor length: 800 mm Rotor diameter: 300 mm Number of movable knives on the rotor: 46 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Ijdpoq Sp Hzofx Ahvshw Single row of fixed knives, two-piece Hydraulic system equipped with an oil cooling system External bearing The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, conveyor receiving with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 9,595 kg, maximum load weight: 16,405 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, Kz. Haus, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, fog lights, leaf air suspension, tow bar air + light, aluminum tank, side. Aluminum underbody protection, roof hatch, green environmental badge Wheelbase: 3600 mm 9t front axle, Hydraulic Auxiliary Drive (HAD), rear axle crown gear 233 planets 13.4t, pipe rupture protection for brake system, electronic braking system with ABS and ASR, ABS can be switched off, disc brakes with partial protection on front and rear axle, electronic parking brake, condensate monitoring for compressed air system, front axle stabilizer, massage function for driver's seat, residual heat utilization, construction site filter, PSM 2nd generation, ClassicSpace, MirrorCam, comfort locking system, light and rain sensor, off-road driving program, Mercedes PowerShift 3, Classic Cockpit, preparation for toll collection, protective plate for tank, daytime running lights, high-performance engine brake, cyclone pre-filter for coarse dust, transmission oil cooling, ESP, lane keeping assistant, attention assistant, turning assistant, Active Brake Assist 5, tire pressure monitoring, auxiliary drive MB 131-2c Pump, engine output rear b flange 100mm 650NM. Frame length approx. 5700mm! Iodpovi Rx Rsfx Ahvjhw New vehicle from stock with daily registration on June 23rd, 2022! ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors reserved! - .

Year of construction: 2004, condition: used, functionality: fully functional, machine/vehicle number: 2400877, Plastic Granulator – DIPRE HERCULES 340 (11 kW) - Fully Functional – Fan/Piping/Cyclone Included DIPRE s.r.l. (Italy) HERCULES 340 industrial central granulator. Key specification: - Year of construction: 2004 - Drive power: 11 kW - Electrical: 3×380 V / 50 Hz - Weight: approx. 820 kg - CE marked - without user manual The machine is fully functional just removed from production. The granulator and the suction/blower can be switched independently on the control panel (for pneumatic conveying). Capacity: depends on the processed material and the screen size. The screen is replaceable; included accessory: 1× 4 mm screen. Free of charge (included with the machine): - suction fan - piping Isdpfoyhnndex Ahvehw - separating cyclone These items are functionally working, but their condition is poor / refurbishment recommended, therefore they are included free of charge.

Condition: used, For sale: Salmatec Maxima 700 pellet press in full working condition, installed in a Rematec container with electrical cabinet and a tent shelter. Capacity – up to 3 t/h. The line includes: - Press and hammer mill: Salmatec – reliable German quality with high efficiency and durability. - Conveying and dosing equipment: Rematec – robust and precise material handling at every stage. - Additional equipment: cyclones, sieves, cooler, control cabinet, etc. - Tent shelter. Key advantages: - High production capacity – up to 3 t/h. - High-quality European manufacturer components. - Suitable for professional pellet production from wood biomass, agro-biomass or other raw materials. - Fully operational line – demonstration possible. - Available immediately. Dismantling and transport are to be arranged by the buyer. We can recommend a company to assist with this process. The equipment can be inspected in full working order in Sweden. All foundation drawings and DWG files are available. Iedpfx Aheit I Rtevjhw Price: EUR 650,000

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. Ihedpfx Aeghmptehvsw We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Year of construction: 2025, condition: new, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h Ihjdpfx Asghmp Nohvow We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Brsgistoyp Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills Iodpfxshga Sre Ahvohw crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, Year of construction: 2025, We produce pellet-briquette line We are the only manufacturers in Lithuania, the only ones with our own service. We will deliver, install, set up and train the lines. We select a package according to your budget. We not only produce the equipment ourselves, but we also produce pellets ourselves, you can come and see the working equipment. Pellet production lines from 100 kg/h to 30 t/h Ihodpfx Ajhgbarjhvew We produce: Drum dryer Belt dryer pipe dryer Pellet plant Mills crushers Conveyor Coolers Cyclones Bunker Packing machines TSF-Justinas

Condition: new, fuel type: diesel, axle configuration: 6x2, wheelbase: 4,400 mm, fuel: diesel, color: white, Year of construction: 2026, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, additional headlights, air conditioning, blind spot assist, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, hill-start assist, lane keeping assist, navigation system, non-smoking vehicle, onboard computer, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, start-stop system, tachograph, tire pressure monitoring, traction control, trailer coupling, New vehicle to be registered, equipped with a Marrel hook-lift system with a 28-ton capacity. Short day cab with 6x2 chassis, wheelbase 4,400 mm. Configuration details: - XF 480 FAN Hook-lift - Day Cab - Heavy-duty front chassis version - External sun visor - LED headlights and fog lights - Black trim + lock, side wall in cab color - Mechanical cab suspension - Comfort Air driver's seat - Lane departure warning system - Standard component positioning - No front view mirror - DAF Corner View system - Bumper color: gray - Cab wall vinyl PVC trim - Driver's seat armrest on both sides - Passenger seat: Comfort Air - Refrigerator - Auxiliary cab heater with residual heat pump - ADR, classes AT+FL+EXII/III*, main cab equipment - Front axle: 8.00 t, parabolic springs, 165N - Rear axles: 2, 8,000 kg, pneumatic load control 156 - Medium front leaf suspension - Automatic lifting device Axles and Tyres: - Front axles: 315/80R22.5 - Rear drive axles: 315/80R22.5 - Second drive or trailing axle: 315/80R22.5 Goodyear brand: - F1: 315/80R22.5 GO KMAX S2 156/150 L Steering CBA Ihedjyg Nctspfx Ahvow - R1: 315/80R22.5 GO KMAX D2 156/150 L Traction DCA - R2: 315/80R22.5 GO KMAX S2 156/150 L Steering CBA Engine: MX-13, 355 kW / 483 HP - Cab badge: 480 - Euro 6 emissions standard - Automated TraXon gearbox, 12 speeds Chassis features: - Wheelbase: 4.40 m / Rear overhang: 2.55 m - Eco Performance - TraXon 12-speed gearbox 12TX2210 DD - PACCAR Connect - Traction aid 15.0 t - Off-road with Rock-free function - Rear axle ratio: 2.47 - Mechanical differential lock - MX engine brake - Right side exhaust - Left side fuel tank - 340L aluminum left fuel tank, height 620 mm - Rear underrun protection bar - Rear fenders - Rear work light pre-equipment - 24V/15-pin trailer electrical connection - Wired body signals and warnings - Wired engine speed control connection on chassis - First PTO on gearbox N./4c-U-32/25 - Max operating external temperature: 45°C - Top cyclonic air intake - Dust lifting shield - Gearbox oil cooler Warranty Plus – Vehicle: 3 years, 300,000 km Leasing and/or financing options available with the best current market rates. Possibility of official DAF maintenance contract and warranty extension. Private negotiation, wide availability of chassis units, 3-axle 6x2 and 4-axle 8x4, ready for delivery with various colors, setups, and engine options. The description may inadvertently contain discrepancies from the actual specifications, which must be verified onsite. This listing does not constitute a contractual commitment. For more information and clarifications, please call the numbers provided, also available via WhatsApp direct. Mr. Paolo Antonio Gorgoni The photo book is taken on site at our locations, so the photos are real and represent the current condition of the vehicle. Please note that the system automatically inserts standard and optional equipment, so there may sometimes be discrepancies. To ensure maximum accuracy, we encourage you to always check directly with us.

Year of construction: 1988, condition: good (used), functionality: fully functional, The offer includes: Herbold feed conveyor, S&S metal detector, Herbold granulator with 8, 10, and 12 mm screen baskets, 7.5 kW extraction fan made from Hardox, dedusting system with cyclone and rotary valve for separating fines from the ground material, transfer fan for Big Bag filling, Big Bag station for two Big Bags with pneumatic switching, and control cabinet with overload protection. Isdsygv Uiopfx Ahvohw

Condition: used, mileage: 218,160 km, power: 330 kW (448.67 HP), first registration: 05/2017, fuel type: diesel, empty load weight: 16,150 kg, maximum load weight: 9,850 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, next inspection (TÜV): 05/2024, brakes: engine braking, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space volume: 11 m³, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, steel body, Mtlg. House, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, differential lock, work lights, rotating beacon, stowage box, leaf spring suspension, left-hand on-board suspension, air+light tow bar, aluminum tank, U-protection, roof hatch, crane at rear, emergency stop, grapple control, high seat, 2-point hydraulic outriggers, 1x hydr. extension, green environmental sticker Wheelbase: 3900 mm Body: Meiller 2-sided tipper body with Bordmatik left approx. 11m³ & rear crane Hiab Jonsered 1300RS79 with high seat, loading height approx. 1540mm. 8t front axle, rear axle disc wheel 300 planetary 13.4t, electronic brake system with ABS and ASR, disc brake with full protection on front and rear axle, ABS can be switched off, parking brake additionally on front axle, condensation water monitoring for compressed air system, stabilizer bar on front axle, stabilizer bar reinforced 2nd rear axle, leather steering wheel. rear axle, leather steering wheel, smoker's package, residual heat utilization, construction site filter, additional thermal insulation, PSM, ClassicSpace, comfort locking system, off-road driving program, Mercedes PowerShift 3, pre-installation for toll collection, tank capacity: 290l, protective plate for tank, LED daytime running lights, High Performance Engine Brake, protective plate under bumper, cyclone pre-filter for coarse dust, transmission oil cooling, Powertrain Pack 1, Protection Pack, Grounder, MB 123-10c MPA N-/M-Speed power take-off. Load diagram: 4m-2940kg, 6m-2100kg, 7m-1800kg! VIN: WDB96421610141255! Isdpfx Ahjvhmkajvohw Gripper available at an extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,245 kg, rotational speed (min.): 560 rpm, total height: 1,830 mm, total length: 1,760 mm, total width: 1,370 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. Ihodpfxsrdgkce Ahvsw We have the offered machines in stock and can carry out tests on them on your material. The new, efficient mills of the RG-36E - (EKO) series with a very good price/quality ratio are mainly used for grinding various types of soft and hard material. The optional system of receiving the milling based on a blower and separating cyclone, provides comfortable and safe operation for the operator. The mills in this series are characterized by their compact, compact design and ease of operation. Each RG type mill is additionally equipped with a flywheel and belt drive. The knives can be repeatedly sharpened and adjusted against each other as they wear. Motor overload protection and safe control voltage as standard. Rotor diameter (mm): 480 Rotor width (mm): 800 Power (kW): 22 kw Knives on rotor (pcs): 6 Fixed knives (pcs): 4 Weight (kg): 1245 P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock)

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 6,500 kg, total height: 3,700 mm, total length: 2,510 mm, total width: 2,060 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. XC series mills are designed for grinding both soft and hard plastics Stainless steel housing and bearing lubrication system will ensure quiet and stable operation Each model is equipped with an ammeter Versions with cyclones are available Control cabinet on Simens components Before purchase possibility of tests on customer's material. If you have any questions, please contact us at the e-mail address or telephone number provided. Ihjdpsrbh U Aofx Ahvjw P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Rotor diameter (mm): 820 Rotor width (mm): 1050 Power (kW): 75 kw Knives on rotor (pcs): 33 Fixed knives (pcs): 6 Weight (kg): 6500 Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock)

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 2,750 kg, total height: 2,470 mm, total length: 2,000 mm, total width: 1,530 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. Ihedpfx Ahsrbg Dtovsw We have the offered machines in stock and can carry out tests on them on your material. XC series mills are designed for grinding both soft and hard plastics Stainless steel housing and bearing lubrication system will ensure quiet and stable operation Each model is equipped with an ammeter Versions with cyclones are available Control cabinet on Simens components Before purchase possibility of tests on customer's material. If you have any questions, please contact us at the e-mail address or telephone number provided. P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Rotor diameter (mm): 500 Rotor width (mm): 720 Power (kW): 37 kw Knives on rotor (pcs): 27 Fixed knives (pcs): 4 Weight (kg): 2750 Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock)

Condition: excellent (used), CTS 3G C 400* - Superheated water boiler with manual wood waste feeding Thermal output: 400,000 kcal/h. Pressure: 4 bar. Superheated water temperature: 150°C. Iodpfxsw Ev Tws Ahvjhw Control thermostat, safety thermostat, thermometer. Fuel: wood waste Smoke exhaust: cyclone, forced-draught fan, connecting ductwork Steaming chamber net capacity: 100 m³/batch DVK-I 100 m³ - 1 unit, 8.5 x 9 m x h 4.3 m Control system: Baschild Italy Sliding door Oxyvent overpressure system Stainless steel tanks and radiators on 3 sides Includes turnkey connections from boiler to steaming chamber and a complete boiler room with distributor, collector, pumps, expansion vessel, etc.