Used Stationary Compactor for sale (1,986)

Condition: ready for operation (used), YEAR OF MANUFACTURE 1993 380V 35A incl. wiring diagram 3,300 x 2,200 x 2,600mm (LWH) Hopper Bsdpfxeu Hz Sts Apdsdi 3,000 x 2,000 x 2,000mm (LWH)

Condition: good (used), functionality: fully functional, total width: 2,800 mm, total height: 3,000 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 3,600 kg, empty load weight: 3,600 kg, Equipment: documentation/manual, BERGMANN Roller Compactor, Roll Packer JRP 7700 - Wood and Pallet Compactor Description For sale is a robust BERGMANN Jumbo Roll Packer for shredding and compacting wood pallets and bulky wood waste, paper, and waste in open containers. The machine comes from an industrial group and was only used sporadically there. The heavy, profiled compaction roller breaks up the fed material and compacts it directly in the container. This allows for better utilization of the available container volume and reduces the number of required collections. Bedpfxsz S N Svo Apdodi Ideal for industrial and commercial companies, logistics companies, wood processing companies, and waste disposal companies. Condition Good, ready-to-use, and fully functional condition with typical signs of wear. Only sporadic use by the previous operator. Technical Data and Equipment Manufacturer: BERGMANN Designation: Jumbo Roll Packer Type according to operating manual: JRP 7700-42 Design: Stationary container compactor Drive: Electro-hydraulic Compaction: Profiled steel roller on the articulated arm Previous use: Wood pallets and wood waste Equipment: Hydraulic unit, control unit, and protective grating Available Documents • Documentation and operating manual • Spare parts list • Electrical wiring diagrams • Hydraulic diagrams Price: €14,900 net, negotiable, plus statutory VAT. Transport/shipping costs, collection. Freight transport by separate agreement; transport costs are not included in the purchase price.

Condition: good (used), Year of construction: 1973, Waste compactor, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container -Stationary press for: interchangeable containers -Load chute: covered Bedpfob A Ii Sex Apdodi -Pressing process: hydraulic -Pressing process: automatic -Emergency safety switch: at the deposit slot -Piston dimensions: 1450 x 650 mm -Piston stroke: 1100 mm -Transport dimensions: 2100 x 4500 mm -side threaded ratchets for skip containers -Functionally tested

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH FIXED 30 is a fully automatic stationary concrete plant specifically designed for medium-scale or long-term ready-mix concrete projects. Manufactured in compliance with CE standards, this plant is one of the top choices for professional users due to its high durability, long-lasting structure, and low maintenance requirements. Its ability to produce all types of concrete in precise proportions provides a comprehensive solution for the wide range of needs in the construction industry. Depending on the type of concrete to be produced in the FIXED 30 model, pan, single-shaft, twin-shaft, or planetary mixer options can be used. The system, which can be equipped with cement silos with capacities ranging from 50 to 500 tons depending on the project scale, facilitates the easy filling of bagged cement with optional blast bunker integration. It also features a customizable design for different climatic conditions; it can be heated with a steam generator and insulation system in cold regions, while cooling systems maintain the optimum concrete temperature in hot climates. Pre-feeding systems that eliminate the need for aggregate feeding ramps increase operational efficiency, while a bucket transport system can be preferred in sites with limited space, allowing for flexible layout plans. Stationary-30 Fixed Concrete Plant Technical Specifications Production Capacity: 30 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo Capacity: 50 – 500 tons Control Type: Fully Automatic What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance. Bdedpfxexpfuij Apdsi

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, At FABO, we design and install stationary type stone crushing and screening plants tailored to meet our customers’ specific requirements. The production capacity of our stationary plants varies between 100 and 1000 tons per hour. Bedpfeyzxctox Apdsdi Crushing & Screening Plant with 250–350 TPH Capacity: • TBX-35 / Vibrating Feeder Bunker – 1 unit • TE-1430 / Intermediate Screen (1400x3000 mm – 2 decks) – 1 unit • PDK-130 / Primary Impact Crusher – 1 unit • TE-2060 / Washing Screen (2000x6000 mm – 3 decks) – 1 unit • TK-100 / Tertiary Crusher – 1 unit • TE-2060 / Vibrating Screen (2000x6000 mm – 3 decks) – 1 unit • Hydraulic Unit for TK-100 • Hydraulic Unit for PDK-130 • Conveyor Belt System (widths: 1000 mm, 800 mm, 650 mm) • Control Cabin, Electrical Panel, Control Panel, and Automation System All our products are manufactured with great care and come with a 1-year warranty. Installation and Operator Training are FREE of charge! FOR MORE INFORMATION, PLEASE CONTACT US!

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, Brodbaek centering device. Bdodpfx Ao Ahhzajpdsi

Condition: used, Year of construction: 2009, Manufacturer: H&G Model: HG/SV 11 Weight: 1800 kg Engine power: 11 kW Bodpfx Apox Hyfyodjdi

Condition: not inspected (used), Year of construction: 1989, functionality: unexamined, overall weight: 20,000 kg, saw drive: 55,000 W, Equipment: cabin, documentation/manual, We offer this untested Primultini 1300 complete sawmill (stationary), manufactured in 1989. Manufacturer: Primultini Model: 1300 Year of manufacture: 1989 Condition: untested Category ID: 1389 Type ID: 415 Machine type: Complete sawmill (stationary) Description: Due to changes in plans, I am selling a used Primultini 1300 sawing system with extensive conveying technology. Technical data & equipment: Bsdpfjztk Atjx Apdodi Power: 55 kW Hydraulic carriage Infeed log conveyor Outfeed lumber conveyor 2 transverse conveyors Primultini sharpening system The system is robustly constructed and suitable for professional use in wood processing. The system has been dismantled and is stored in a warehouse. Inspection is possible by appointment. If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2022, functionality: fully functional, Used horizontal ZENZ block bandsaw line, type BN 110 S, with complete conveying system, stationary. Automatic infeed system with log feed-in device, control panel for the block bandsaw, with cutting program and conveying system for the removal of cut material, including a sorting conveyor. Year of manufacture: 2007; general overhaul in 2022 Conveying system year of manufacture: 2022 Manufacturer's number: 141-8300 Bdjdpfx Apj Adr Uvjdji Equipment: • 22kW drive motor • 7m cutting length • 5 vertical supports • 2 log turners (+2 holders) • Log lifting preparation with frame • 4 leveling supports with clamps (+2 holders) • 1 log roller • 1 new pre-cutter • PLC control including cutting program • Seat mounted on armrests • PLC on the left - joystick on the right • 1 Zenz sharpening machine, type AHB (factory number: S-1012) • 4 bandsaw blades 6000x100x1.1 stellite for softwood (prod. no.: AB 0) • 4 bandsaw blades 6000x100x1.1 stellite for hardwood (prod. no.: AB 0) • Water lubrication system with 20l tank and nozzle o Mounted on the blade guide • Log lifting system o With 3 log lifting arms o With 2 cylinders • Log lifting preparation in the frame o With control unit o Holder for pipe o Two holders for cylinders • Ejector, hydraulically operated, for 820mm frame • Green laser indicator, horizontal Mechanization consisting of: • Folding frame, hydraulically operated, for removal at the saw with electrically driven roller conveyor • Electrically driven roller conveyor with hydraulic ejectors o Both roller conveyors run simultaneously • Roller conveyor, 4m long, slightly inclined with stop o All electrical and hydraulic elements can be operated from the control panel The block bandsaw, including the conveying system, is fully operational. If required, we can provide support with dismantling and assembly.

Condition: used, Year of construction: 2006, functionality: unexamined, filter area: 123 m², actuation type: electric, Operational until calendar week 31/2026 Inspection possible Sale after merging several smaller filters into a single, larger filter housing Bjdj Ahhhwopfx Apdjdi Sale including the foundation Scope of sale: - Filter housing Rippert RDSN 7 - Cyclone separator

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, For sale is a complete, stationary AL-KO PROFI-JET BG 2 dust extraction and filtration system for wood dust, manufactured in 2000. The system was used in a wood processing production facility and is fully equipped with a fan, automatic filter cleaning system, rotary airlock, silencer, frequency converter, control cabinet/controller, and extensive ductwork. The dust extraction system was operated inside the production hall, and the filtered return air was returned to the production area. The filter system has an H1 rating and, according to the label, is suitable for separating wood dust with a residual dust content of ≤ 0.2 mg/m³. Technical data of the filter system: Manufacturer: AL-KO THERM GmbH Type: PROFI-JET BG 2 Year of manufacture: 2000 Serial number: 000909 Volume flow rate: 10,500 m³/h Filter area: 62.5 m² Weight of filter system: approx. 1,600 kg Filtration: Surface filtration Filter cleaning: automatic compressed air cleaning Compressed air connection: max. 6.0 bar Filter elements: approx. Ø 120 mm × 2,500 mm length Height of filter housing: approx. 2,600 mm H1 wood dust rating: residual dust content ≤ 0.2 mg/m³ Dimensions: Length: approx. 2,400 mm Width: approx. 1,620 mm Overall height: approx. 4,500 mm Fan: Manufacturer: JKF Industri Type: JK-40 MTD L Power: 15 kW Speed: approx. 2,900 rpm Fan year of manufacture: 2000 The installed 15 kW drive motor is rated separately with 2,920 rpm at 50 Hz and protection class IP55. Frequency control and controller: The dust extraction system is equipped with a Danfoss VLT 6000 HVAC frequency converter. Complete control cabinet with Siemens controller and Siemens TD 200 operating panel included. The automatic filter cleaning is carried out pneumatically via individually controlled valves. Rotary airlock: Manufacturer: AL-KO Type: ZRS 960 Rotary valve: Ø 320 mm Number of vanes: 7 Inlet: 250 × 960 mm Outlet: 208 × 960 mm Delivery rate: 47,450 l/h Motor power: 0.55 kW Speed: 12 rpm Protection class: IP54 Additional equipment: Included with the system: - Silencer, connection Ø 400 mm - Return air ducting to the production hall - Complete system control - Danfoss frequency converter - Automatic pneumatic filter cleaning - Rotary airlock - Extensive galvanized dust extraction and return air ducting Large parts of the existing ductwork can be taken over after consultation. The system is still in its assembled condition. This allows the layout, duct routing, and existing components to be inspected and documented before purchase. Location / Sale: Location: 3608 Thun, Switzerland Available: immediately Dismantling no later than: 07/31/2027 The system will be sold in its currently assembled condition. Dismantling, removal, loading, and transportation will be carried out entirely by the buyer at their own expense and responsibility. In the event of a sale to a foreign country, transportation, export/import, and customs duties will also be borne by the buyer. Bsdpfx Ajz Ikzpjpdsdi Inspection possible by appointment. Sold as is, without warranty. Selling price: 12,500.00 EUR Price net, any applicable taxes and duties will be added. Export, customs duties and import duties are the responsibility of the buyer.

Condition: repair required (used), functionality: not functional, operating hours: 12,015 h, power: 11 kW (14.96 HP), input voltage: 11 V, intake manifold diameter: 500 mm, filter area: 213 m², total height: 7,500 mm, total length: 3,000 mm, total width: 3,000 mm, 213 m² filter area (standard filter hoses), vibrating motor, fire protection damper in the return air duct, motorized adjustment of the return air (inside/outside), fire hose, approximately 27 m³ intermediate silo, articulated arm discharge to the press. Bdodpfxsz R Sulo Apdoi Briquetting press: motor 11 kW, 12,015 operating hours. The hydraulic pump was replaced and the hydraulic block was overhauled at approximately 10,000 hours; the hydraulic cylinders are leak-proof. The press operates in automatic mode with a level sensor; a second sensor is activated when the silo is overfilled. The briquettes have a diameter of 70 mm, and the density can be adjusted. The system requires repairs: the chrome plating on the clamping chuck is worn off. Since the system has not been in operation for 12 years, the electrical system needs to be overhauled, and the mechanical components need to be serviced. I would assist with the dismantling; a forklift is available.

Condition: repair required (used), Year of construction: 1991, Year of manufacture: 1991 Bjdpfx Ao Aax I Iepdedi Roll-off container system 20 m³ Year: 1991 400 V, 32 A, CEE plug 4 kW 4700 kg Requires repair: The locking mechanism needs to be made functional.

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. TECHNICAL SPECIFICATIONS: Model: COMPACT 60 Production capacity: 60 m3 Mixer type: Twinshaft mixer 1 m3 Cement weighing: 600 kg Additives weighing: 30 kg Water weighing: 250 kg Cement silo is optional. COMPACT-60 consists of: • Aggregate Storage Bunker • Aggregate Weighing Hopper • Aggregate Weighing Conveyor • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper Bdedpfs Ahha Eox Apdoi • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet with Air Conditioner • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), Year of construction: 2001, machine/vehicle number: 077359, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 380 V, input current: 22 A, input frequency: 50 Hz, volume flow: 7,500 m³/h, intake vacuum (max.): 30 mbar, suction capacity: 7,500 m³/h, intake manifold diameter: 300 mm, filter area: 36 m², noise level: 76 dB, actuation type: electric, total height: 4,000 mm, total length: 1,600 mm, total width: 2,250 mm, overall weight: 1,000 kg, year of last overhaul: 2025, Due to the purchase of new equipment to expand our machinery, this functional dust extraction unit is for sale. It can be inspected up to week 42; after that, we will dismantle it. The impeller was replaced in October 2025 – a parts invoice is available. Bodjz Erfdopfx Apdjdi

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 180 Production capacity: 180 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 5x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 180 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper Bdodpfxs Ahhawe Apdei • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: ready for operation (used), Manufacturer: H&G Model: HG/SV 11 Bedpfezp Ilqox Apdjdi Weight: 1800 kg Engine power: 11 kW

Condition: used, Year of construction: 2000, Cement silos, 53 m3 / 70 tons, with legs, filters, and ladders. Quantity available: 4 units. Price per unit. Bdsdpfxo Ady Spo Apdoi

Condition: ready for operation (used), Year of construction: 2017, operating hours: 8,060 h, functionality: fully functional, overall weight: 1,750 kg, total width: 2,300 mm, total height: 2,400 mm, total length: 7,500 mm, input voltage: 400 V, year of last overhaul: 2026, transport width: 2,350 mm, Equipment: documentation/manual, Year of manufacture: 2017 – Engine: 15 kW Cutting dimensions: – Maximum log diameter: 95 cm – Clear distance between rollers: 73 cm – Maximum cutting width (plank): 64 cm – Maximum cutting height above the blade: 39 cm – Maximum cutting length: 6.2 m The sawmill is equipped with a complete hydraulic system: – Hydraulic leveling system – Side stops – Material press Bdodpfx As Aavnfspdoi – Toothed rotator – 2 loading arms Cutting head equipment: – Automatic device for setting the cutting thickness – Electric adjustment of the head height: up/down – Electric forward/backward feed of the head, with continuously adjustable speed – Electric blade guide arm – Hydraulic blade tensioning system with air cushion – Bark remover

Condition: used, Year of construction: 2022, Manufacturer: SERRA Maschinenbau GmbH, Germany Type: Log band saw (Block bandsaw machine) Model / Type XE135-6-S / XE135 Year of manufacture: 2022 Material number / factory number: XE135-2022-1750 Identification number: W09XE6060NESD1750 Power supply: 3-phase, 400 V, 50 Hz Current (from nameplate): 70.8 A Operating pressure: 180 bar Weight: 5350 kg Catalogue specifications XE135: Basic cutting length: 6 m Nominal log diameter: Up to 135 cm Cutting width: 100 cm Clearance above / below the blade: 50 cm / 111 cm Blade wheel diameter: 800 mm Blade width: 120 mm; also 140 mm Blade length: 5520-6030 mm, depending on the setting Blade thickness: 1.1 or 1.2 mm Tensioning mechanism stroke: 300 mm Guide / guard opening: Hydraulic Head height adjustment: Electric Head feed: Electric / hydraulic Log handling: Hydraulic Frame: I-beams 300 mm; steel supports 20 mm Wood support surfaces: Stainless steel Catalogue performance: 33 m³ / 8 h Seller contact: 571*326*804 Bedpfe Aful Hex Apdjdi Machine currently operating in Poland.

Condition: used, functionality: fully functional, Dust extraction nozzle for a four-sided planer Number of connections: 9 Connection diameter: 140 mm Main duct diameter: 450 mm Bdjdps Agrzlefx Apdoi This nozzle is compatible with a Weinig Hydromat planer:

Condition: used, Year of construction: 1998, machine/vehicle number: 980919, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, volume flow: 3,450 m³/h, intake vacuum (max.): 3,550 mbar, suction capacity: 3,450 m³/h, intake manifold diameter: 250 mm, filter area: 23 m², total height: 2,959 mm, total length: 2,500 mm, total width: 1,238 mm, overall weight: 750 kg, Used clean air system for two to three woodworking machines operating simultaneously. Can be installed outdoors. Bdjdpfx Apozukulodei New units can be installed upon request. The control system is equipped with a speed control function via a frequency converter.

Condition: excellent (used), Year of construction: 2022, NESTRO dust extraction system Capacity: approx. 20,000 m³/h Filter area: 175 m² Vacuum fan: 22 kW The filter is equipped with an automatic filter bag cleaning system, an air return system, control system, and fire and explosion protection. Technical data: Manufacturer: NESTRO / Netecs Type: NFP 9/9/30 Year of manufacture: 2022 Production number: 22/6014 System capacity: approx. 20,000 m³/h Max. filter capacity: approx. 22,000 m³/h Vacuum fan: 22 kW Filter area: 175 m² Number of filter bags: 81 pcs. Bag dimensions: DN 230 × 3000 mm Max. filter vacuum: 4000 Pa Bjdpfxe Af Utze Apdsdi Max. dust moisture: 15% Filter cleaning: automatic, vibration-based Cleaning without compressed air Filter emptying: rotary airlock Construction: galvanized sheet metal, 2 mm thick Noise level: < 80 dB(A) Filter voltage: 400 V Frequency: 50 Hz Filter weight: 3612 kg Variable frequency drive: 22 kW Equipment and safety: automatic vibration-based filter bag cleaning antistatic filter fabric, category C dry extinguishing system certified explosion-proof flaps/panels design compliant with ATEX requirements fire damper on the air return adjustable air return damper 0–100% control of fan, rotary airlock, cleaning, and safety features pressure sensor and automatic capacity adjustment via a variable frequency drive ladder and service platform TECHNICAL CONDITION: PERFECT!!!!

Condition: good (used), functionality: fully functional, Primultini 1300, fully functional and in very good working condition. Bsdpfx Apo Ahdv Sedjdi

Year of construction: 2004, condition: used, functionality: unexamined, machine/vehicle number: 116996-04, Manufacturer: SPECTRO Analytical Instruments GmbH & Co. KG Type: SPECTROLAB F / LAVFC01A Year of Manufacture: 2004 Project/Order No.: 16996/04 Lab No.: 116996-04 Stationary metal analysis instrument / OES spark spectrometer for copper alloys Stationary SPECTRO SPECTROLAB F metal analysis instrument for quantitative material analysis using optical emission spectrometry (OES/spark spectrometry). According to the available original documentation, the system is designed for the analysis of copper-based materials. The programs CU-00 for standardizing the Cu base, CU-20 for Cu/Zn alloys, and CU-70 for Cu/Al alloys are installed and documented. The spectrometer has three documented optics and measurement channels for numerous alloy elements and accompanying elements. Among others, it detects Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, and S. Extensive original documentation is available for the instrument, including test and photomultiplier protocols, configuration documents, standardization documents, and the operating manual for the Spark Analyzer Vision software. Various re-calibration/reference samples and accessories are also included. An existing analysis printout dated December 20, 2022, documents the practical use of the system for the analysis of CuZn40Pb2 materials. The printout shows measured values for numerous alloy and trace elements. Used condition with signs of wear and tear due to age and use. The instrument dates from 2004. Extensive instrument-specific documentation, accessories, and re-calibration/reference samples are available. The use and performance of material analyses are documented by existing analysis printouts from December 2022. Scope of delivery • SPECTRO SPECTROLAB F metal analysis instrument • Available re-calibration/reference samples • Various sample specimens and standards • Set of cables or available connection lines • Small parts and consumables • Adapter for small parts • Available boron nitride discs • Available SPECTRO accessories • Software/data carrier, including SPECTRO Data Backup • Documentation and test documents • Operating manual Spark Analyzer Vision • Documents for DIA 2000 / DIA2000SE • Photomultiplier test protocols • Configuration and standardization documents PC, monitor, and printer are listed in the original delivery documents. Measurement method: Optical emission spectrometry (OES) / Spark spectrometry Design: Stationary metal analysis instrument Readout system: MICRO 8 Calibration: Cu-base Applications: Cu-20 / Cu-70 Standardization: CU-00 – Cu-Base Installed programs: Bdodpfx Aezx Dwnjpdji CU-00 – Standardization Cu-Base CU-20 – Cu/Zn alloys CU-70 – Cu/Al alloys Optical system: 1 × UV optic, documented with 6 lines 2 × Air optics, documented with 13 / 7 lines Optic 1: 3600 / 750 Optic 2: 3600 / 750 Optic 3: 2400 / 750 Monochromator: No Excitation source: 3000 / 300 Hz / Pure Ar Operating voltage: 230 V Mains frequency: 50 Hz Operating language: German Documented elements: Cu, Zn, Pb, Sn, Al, Fe, Ni, Si, Mn, Mg, Cr, Co, Cd, Sb, P, S Photomultiplier: predominantly R6350, individual UV channels R6351 according to test documents Software according to documentation: DIA 2000 Basis / DIA2000SE, Spark Analyzer Vision Spark Analyzer Vision manual: Version 09/2004 Documented software version: 1.40.0xx