Used Dust Extraction for sale (28,995)

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Tsdsunh Uvspfx Af Tjf Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m width - 1.25m

Condition: new, functionality: fully functional, Year of construction: 2025, Advantages of DC Chip Extractors The purpose of the Vibra Motor shaking system is to ensure stable operating parameters and to monitor the proper functioning of the extractor. A heavy-duty design enhanced with a radial fan guarantees maximum vacuum efficiency. The extractor is intended for dry sawdust and wood chips. Thanks to the airtight construction, it is suitable for operation both outdoors and inside the facility. Adapted for operation in a positive-pressure system (fans work on the contaminated side of the dust collector) as well as in a negative-pressure system (fans work on the clean side of the dust collector). The sound-insulated design and specially shaped impeller blades contribute to quiet and efficient operation while minimizing electrical power consumption. A key advantage of the extractor is the use of flexible and durable seals in critical areas, improving the tightness of the entire system without heat loss at connection points. A multifunctional device with a modular system allowing any configuration of the extractor. Warm air recovery system. Control cabinet equipped with an intuitive control panel that allows monitoring of filter contamination levels. For filtering smaller particles, a filter such as HEPA should be used. It is forbidden to use this extractor in an explosive atmosphere. The extractor is not designed to work with wet material (e.g., wet sawdust). Industrial Chip and Sawdust Extractor DCV21750 Technical Specifications Motor Power: 25 HP / 400 V, 50 Hz Extraction Capacity: 21,750 m³/h Inlet/Outlet Diameter: 400 / 400 mm Suction Speed: 28 m/s Number of Filters: 2 × 48 Number of Waste Bags: 8 Dimensions (L × W × H): 4600 × 1700 × 3500 mm Weight: 1400 kg SPECIAL OFFER!!! LAST UNIT IN STOCK! Tedex Agpzjpfx Af Tef

Condition: excellent (used), Dust extraction Walther NOVA 2000 with 2 extraction arms Tjdpfx Afoivta Ns Tof mobile on rollers 2 pieces available Very good condition ready for use!!!

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 450 kg, total width: 990 mm, total length: 1,800 mm, total height: 2,000 mm, volume flow: 6,500 m³/h, suction capacity: 6,000 m³/h, noise level: 70 dB, filter area: 120 m², intake manifold diameter: 300 mm, warranty duration: 12 months, power: 5.5 kW (7.48 HP), space requirement length: 2,000 mm, space requirement width: 1,000 mm, space requirement height: 2,000 mm, Equipment: documentation/manual, 1. Product Description The Airtech extraction unit is a horizontally installable, integrated dust separation system (cartridge filter unit) equipped with multiple filter cartridges. It is designed for applications with small to medium airflow volumes and offers high efficiency in particle separation. Key Features: Tsdpfx Afoxxvpij Tef - Multiple filter cartridges in a horizontal configuration for a compact and maintenance-friendly design. - Particularly suitable for industrial applications that require constant and reliable dust extraction. Your Benefits: - High Filtration Efficiency & Air Quality: Thanks to multi-stage filtration, fine dust particles are effectively retained, contributing to clean air and extending the service life of your production equipment. - Compact Design: The horizontal layout saves space and facilitates integration into existing systems. - Low Maintenance: Easy access to the filter cartridges allows for efficient inspection, cleaning, or replacement. Powerful: The 5.5 kW blower ensures strong suction power and stable extraction performance even in challenging applications. Delivery ex works / from stock Installation and Commissioning (optional): Available upon request by our trained technical team. Spare parts (filter cartridges) as well as maintenance contracts can be offered separately to maximize your system’s uptime.

Condition: used, Year of construction: 2024, Motor power: 1.5 kW Inlet nozzle: NW 120 mm Rated air flow: 814 m³/h Vacuum at rated flow: 2,180 Pa Filter area: 5.1 m² Manual cleaning including integrated pre-separator Collection container: 135 L Location: Nattheim Tjdpfx Ajxbhz Aof Tjf

Condition: used, Grinding dust extraction Tsdpfx Afocfy Hqe Tjf

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, nominal power: 11 kW (14.96 HP), Wet extraction for metallic dusts with 11kW and approx. 6000 m³/h. Demonstration machine in very good condition. Todpfoxw Ib Ijx Af Tef

Condition: good (used), Year of construction: 2006, Previous use : Extraction of graphite dust Protection class IP65 Negative pressure approx. -27m/bar Todpfx Afjxw Er Dj Tof Air flow rate 2650 m³/h Air flow rate at fan 4500 m³/h Motor 2.2 kW .

Condition: excellent (used), Extraction dust removal Nedermann type 663 with 2 suction arms Tedpfxoiyyxcj Af Tsf Very good condition, directly from production!!!

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, overall weight: 580 kg, total width: 990 mm, total length: 1,900 mm, total height: 2,400 mm, volume flow: 6,500 m³/h, noise level: 70 dB, filter area: 120 m², intake manifold diameter: 300 mm, warranty duration: 12 months, power: 7.5 kW (10.20 HP), space requirement length: 2,000 mm, space requirement width: 1,000 mm, space requirement height: 2,500 mm, Equipment: documentation/manual, 1. Product Description The Airtech extraction unit is a horizontally mountable, integrated dust separation system (cartridge filter unit) equipped with multiple filter cartridges. It is designed for applications with small to medium airflow volumes and delivers high efficiency in particle separation. Main features: - Multiple filter cartridges in a horizontal design for a compact, maintenance-friendly construction. - Particularly suitable for industrial applications where consistent and reliable dust extraction is required. Tjdpfx Afexxvkms Tsf Your Benefits - High filtration efficiency & air quality: Thanks to multi-stage filtration, fine dust particles are effectively captured, contributing to clean air and prolonging the lifespan of your production equipment. - Compact design: The horizontal configuration saves space and facilitates integration into existing systems. - Low maintenance: Easy access to the filter cartridges allows for efficient inspection, cleaning, or replacement. Powerful: The 7.5 kW blower ensures strong suction and stable extraction performance, even for demanding applications. Delivery ex works / from stock Installation and commissioning (optional): Available on request, performed by our trained technical team. Spare parts (filter cartridges) and maintenance contracts are available separately to maximize your system’s uptime.

Condition: new, Year of construction: 2025, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips Tedpfx Afovzqtxs Tsf a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, low noise and high efficiency are ensured by a metal balanced rotor ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm SUCTION CAPACITY 7500 m3/h SUCTION PORT DIAMETER 280 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 35 DIMENSIONS 1040 x 625 x 2150 mm WEIGHT 306 kg Manufacturer: Cormak

Condition: used, No. 04497 Sanding dust extraction table / sanding table Schuko Octopus 20 Used Sanding dust extraction table for connection to an existing extraction system Base area 2280 x 1000 mm LW Practical storage area for hand tools Suction surface approx. 1950 x 700 mm LW Height of suction surface adjustable by 300 mm Suction connection 160 mm Required volume flow 2000 m3/h Required negative pressure 1100 Pa 2 sockets, 220 V 2 quick couplings for compressed air connection 2 quick couplings for vacuum connection 2 vacuum suction cups and various stops The table must be connected to an external suction system and vacuum generator Transport dimensions approx. 2500 x 1000 mm LWH Weight approx. 200 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Tsdpfx Asxrga Sof Tjf Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2017, overall weight: 512 kg, total width: 1,400 mm, total length: 1,400 mm, total height: 2,660 mm, type of input current: three-phase, negative pressure: 4,600 Pa, filter area: 14 m², suction capacity: 2,655 m³/h, Dust extraction unit, RINGLER/Karcher Group brand, self-cleaning vacuum filter, extractor and dedusting system designed for efficient extraction of graphite, metallic, mineral dusts, hard fibers, flammable, hazardous, toxic substances, and for process dust collection during sandblasting, soda blasting, grinding, polishing, and all types of dry dust. The vacuum fan is positioned after the filter on the clean air side, minimizing the risk of explosion. Brand: Ringler / Karcher Group Model: RE201 D5.5 IE3 Pocket filter cartridge – multi-pocket Fan power: 5.5 kW Capacity: 2655 m3/h Vacuum: 4600 Pa Filter surface: 14 m2 Inlet diameter: 180 mm / 125 mm Electromotorized filter cleaning Device in very good condition. Tsdpjxn Rgujfx Af Tjf Warehouse No.: 1051

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas extraction fan, extraction filter system -Manufacturer:Oelde, extraction system, extraction filter system, type size 16 -Air flow: 22 m³/min -Engine: 1.85 kW -Speed: 2890 rpm Tjdpfjryalijx Af Tef -Individual components/technical data: see photos -Dimensions: 870/480/H1250 mm -Weight: 100 kg

Condition: excellent (used), Field of application: • Single and multi-station extraction in industry and trade • Free-flowing and dry dusts, health-hazardous dusts, dry chips Special features: • Filter cleaning method: • Brush cleaning (manual) • Cleanable permanent filter cartridge (dust class M) • Special versions with various filter cartridges, exhaust ports, special voltages, custom paint finishes, pre-separators, and external control via volt-free contact are possible Your advantages at a glance • High suction power due to side channel blower technology • Low operating costs • Quiet operation suitable for multi-shift use • Patented tiltable filter housing for easy disposal of collected material | Price including packaging (wooden crate) | plus shipping costs Tedpfx Afjw Avl Uj Tef

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Tedpfxjxf Up Io Af Tof

Condition: good (used), Year of construction: 2006, filter area: 414 m², input voltage: 400 V, total width: 4,000 mm, total length: 8,000 mm, total height: 5,000 mm, operating temperature: 270 °C, overall weight: 49,000 kg, temperature: 150 °C, power: 0.101 kW (0.14 HP), input frequency: 50 Hz, Equipment: documentation/manual, 1. Technical data/Filter for dust removal from aluminum melting furnaces - air volume 49000 Bm3/h, exhaust gas temperature max. 150 degrees C, dust type: aluminum dust, filter surface: 414/387m2, filter type: NFS641/492, filter surface load: 1.27 Bm3/m2 min, filtering agent: polyester needle felt, cleaning: via connected blowing air fan during operation, space requirement: approx. 7.5m x 4.0m, residual dust content: Todpfx Ash Nx U Tof Tjf

Condition: used, No. 04490 Mobile extraction unit / Mobile dust extractor ESTA Dustomat 10 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Todsxn Tilepfx Af Tef Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 600 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 2009, type of input current: three-phase, overall weight: 200 kg, suction capacity: 2,000 m³/h, filter area: 10 m², negative pressure: 2,300 Pa, Equipment: documentation/manual, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum for sandblasting, soda blasting, shot blasting and for all types of dry dust. Brand: Pionier Tsdsxnmw Nepfx Af Tsf Model: Entstauber PF-2B The filter is cleaned with compressed air pulses during operation, ensuring high device efficiency. Fan located on the clean side, minimizing explosion risk. Specifications: Capacity: 2000 m3/h Vacuum: 2300 Pa Filter surface area: 10 m2 Cartridge filter element. Motor power: 1.5 kW Inlet diameter: 180 mm HEPA filter, filtration class H13 Year of manufacture: 2009 Stock number: 1057

Condition: good (used), Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Dust extraction fan: radial fan -Motor: Dietz 3.0 kW 1420 rpm -Fan wheel: Ø 590 x 160 mm Tsdev E D E Nopfx Af Tjf -Volume flow: m³/h -Dimensions: 790/710/H790 mm -Weight: 104 kg

Condition: good (used), Year of construction: 2018, power: 0.55 kW (0.75 HP), AR Filtrazioni ARF 700 YB air purifier, built in 2018. The ARF series is designed for the extraction and purification of micro-dust and fumes generated during dry/wet processing. The incoming air first passes through a metal filter sequence and a synthetic filter, which traps larger particles. In the next phase, the air is passed through a very high-performance HEPA filter (H13) in accordance with the European standard EN 1822, before being released back into the environment completely clean. Dimensions: 460 x 500 mm, H 1,050 mm Weight: 80 kg Flow rate: 700 m³/h Tedev T Db Tjpfx Af Tjf Connection: 100 mm #8347

Condition: used, Year of construction: 1997, Product: HÖCKER VACUMOBIL EA 250 Motor: 5.5 kW Extraction capacity: 4200 m³/h Cylinder filter: 96 units (length: 1250 mm, diameter: 80 mm) Tsdpfxexbf Rbs Af Tof

Condition: used, machine/vehicle number: 0940, without hall piping Tsdpsrz Iq Hsfx Af Tof

Condition: used, No. 04491 Mobile extraction unit / Mobile dust extractor ESTA Dustomat HMS 10 WN Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts of dust explosion classes St 1 and St 2 400 V, 1.1 kW, with power cable and plug Nominal air volume flow 720 m3/h Filter area 3.5 m2 Extraction pipe connection diameter 100 mm Filter cleaning by hand crank Chip container 670 x 460 mm Mobile unit CE-compliant Transport dimensions approx. 1300 x 550 x 1700 mm LWH Weight approx. 100 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Todjxnqauepfx Af Tof Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, No. 04489 Tedpfx Asxnprcjf Tef Mobile extraction unit / Mobile dust extractor ESTA Dustomat 61 Used For extracting wood dust and chips Filter type H2 for wood dust, residual dust content level 2, 0.2 mg/m3 Type 1, for extracting combustible dusts in zone 22 400 V, 3 kW, with power cable and plug Nominal air volume flow 1850 m3/h Extraction pipe connection diameter 160 mm Filter surface area 9.6 m2 Filter cleaning by hand crank Filter dimensions approx. 720 x 510 mm Chip container 860 x 570 mm Mobile unit CE-compliant Including new replacement filter Operating instructions available Transport dimensions approx. 1700 x 800 x 2100 mm LWH Weight approx. 250 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse