Used Cleaned for sale (5,892)

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, load capacity: 200 kg, arm reach: 2,400 mm, repeat accuracy: 0.06 mm, empty load weight: 1,155 kg, number of axes: 6, Auction of a package of 4 KUKA KR 200 robots! The machines have been fully overhauled (cleaning, oil change, mechanical maintenance, repeatability and load tests)! TECHNICAL DETAILS Payload: 200 kg Arm reach: 2,400 mm Number of controlled axes: 6 Working envelope: 38.6 m³ Positional repeatability (ISO 9283): ± 0.06 mm Range of motion: A1: ±185° A2: -142° / 0° Iasdpfox Syktox Ah Nel A3: -120° / 148° A4: ±350° A5: ±120° A6: ±350° Axis speeds (rated load): A1: 90 °/s A2: 85 °/s A3: 85 °/s A4: 117 °/s A5: 120 °/s A6: 195 °/s MACHINE DETAILS Controller model: KRC2 Weight per robot: 1,155 kg Noise level: < 75 dB Tilt angle: ± 5° Ambient temperature (operation): 10 °C to 55 °C Ambient temperature (storage/transport): -40 °C to 60 °C INCLUDED EQUIPMENT Manipulator KRC2 control cabinet Teach pendant Cable sets

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 00034717-00-0010-01, The original purchase price of the system was €93,000! Washing system with the following configuration: - Recycled water system (QU00370) - Articulated guide device (QU01210), clearance height 2,250 mm - SENSOFIL + (QU01410), clearance height 2,250 mm - Splash guard for roof brush (QU00142) - Wheel wash system with brush & linear technology (QU00151) - Side high-pressure (QU00152), 2 RD, 1 overflow: 20 l/min, 85 bar - Side high-pressure (QU00169), 8 OD, 1 overflow: 40 l/min, 50 bar - Active foam unit (QU01500) - Special wax unit (QU01530) - Emergency stop device front left (QU00320) - Emergency stop device front right (QU00330) - Emergency stop device rear left (QU00340) - Emergency stop device rear right (QU00350) Iodpox Rzw Eefx Ah Nsal - Positioning device, LED, fixed, left (QU00388) - Positioning device, LED, fixed, right (QU00389) - Mains water separation, pipe separator (EZ00000) - Energy supply chain (EZ00020) - Control terminal, VARIO-L, wall-mounted (EZ02500) - Wheel guide rails (EZ00700) - Signs DIN A3 - Documentation, PWA, standard, DE - VDA conformity certificate, PWA, DE - Basic chemical equipment, PWA Electrical data: Rated voltage: 400 V Mains connection: 3/N/PE Frequency: 50 Hz Power consumption: 19.0 kW Rated current: 38 A

Condition: refurbished (used), functionality: fully functional, Year of construction: 2014, operating hours: 23,000 h, controller model: Siemens Sinumerik 840D SL, laser type: fiber laser, laser power: 5,000 W, working length: 3,000 mm, working width: 1,500 mm, The machine was overhauled in 2025! TECHNICAL DETAILS Working area: 3,000 x 1,500 mm Laser type: Fiber laser Laser power: 5,000 W MACHINE DETAILS Control: Siemens Sinumerik 840D SL Year of last overhaul: 2025 Laser beam transmission: Fiber optic Machine chiller unit: Water-air Laser chiller unit: Air-water Operating hours: 23,000 h EQUIPMENT CE marking Nozzle changer Chiller unit Emergency stop switch Safety light barrier Dust extraction system Machine frame with integrated control cabinet Automatic longitudinal pallet changer Axis drive with linear motor technology and torque motor Integrated control cabinet lighting Central main switch Longitudinal chip conveyor Working area illumination Laser positioning diode Oil vaporization system PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Transport and positioning device Universal laser cutting head with adaptive lens system Single-head strategy Cutting head protective window Online monitoring of protective window ControlLine Automatic standstill Program-controlled cutting gas pressure regulation FastLine FlyLine AdjustLine Remote maintenance via internet Simple workshop programming Copper processing package Brass processing package Micro welding Multiple sheet processing Condition Guide USB interface RJ-45 network card Central connection Segmented extraction unit Compact dust collector Machine cabin with safety windows Electrically opening roof Commissioning Network configuration via remote maintenance Solid-state laser TruDisk 5001 (5 kW) with fiber output DetectLine Iodpox Tuk Defx Ah Njal Machine layout right-hand side Interface for LiftMaster Compact

Condition: like new (used), Year of construction: 2012, input voltage: 400 V, 2 X Zentner Washer 250 - Screen Cleaning Units Unit 1 Unused and New Condition $20,000.00 USD Iajdpfx Ahjv Dpy Ne Nel Unit 2 Used - Excellent Condition $16,000.00 USD

Year of construction: 2021, condition: excellent (used), functionality: fully functional, In the Powder applicator it consists of a hopper and a vibrator feeder, that spreads out the granulate in an 130 cm and even coating over the printed transfer paper on the under laying conveyer 140 cm wide net belt, 150 cm long. Iaedpsx R N Ursfx Ah Nel The machine is height adjustable 88-100 cm and has the total length 150 cm. The powder feeder as well as the conveyor are both individually adjustable for optimal processing. Excess powder is effectively removed by a combination of airstreams, scatter mechanism and brushing. The silent automatic self-cleaning filter system recycle the granulate back to the hopper for re-processing and exhausts filtered air. In order to minimise the influence of static electricity there is two antistatic bars across the conveyor.

Condition: good (used), functionality: fully functional, Sheet Cleaning Machine Jeros 5015/828 for 2-edge trays short side raised stainless steel design with oiling system DGUV V3 tested exclusively by us Iaodpfxjyaklce Ah Nel connection 400V, 16A CEE plug Used machine Options: sheet trolley maintenance contract service package delivery service training & commissioning spare parts box Visit us!

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 7600-101325, load capacity: 340 kg, arm reach: 2,800 mm, pivoting range: 360 °, warranty duration: 4 months, Equipment: documentation/manual, Robot with a 4-month warranty General overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Changing the oils for all six axes. - Battery replacement: All internal batteries were replaced with new batteries. - Mechanical maintenance: Gears and counterweight were inspected and serviced after repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, teach pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in the original color or a custom color upon request. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Iodpfx Ahsx Syivj Njal Control: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 revolutions Dynamics (max. rotation speed per axis) Axis 1: 75°/s Axis 2: 60°/s Axis 3: 60°/s Axis 4: 100°/s Axis 5: 100°/s Axis 6: 160° °/s Position and Path Precision Position Accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization Time (Pst at ±0.4 mm): 0.18 s Path Accuracy (AT): 2.05 mm Path Repeatability (RT): 0.23 mm FEATURES - 6-axis industrial robot with a high payload class - Large swivel range on axis 6 with up to 67 revolutions - Precise path guidance with repeatability of less than 0.3 mm - High speed of the wrist axes for fast movements - Perfectly suited for heavy-duty handling and precise motion sequences

Condition: ready for operation (used), Year of construction: 2023, This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working range of Ø 3900 mm. Equipped with advanced QC 2 control system, it includes a programming handheld device and supports new tandem leading/trailing processes. Ideal for high-quality welding applications, it also comes with a comprehensive set of welding and sensor technologies. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working range: Ø 3900 mm • Programming handheld device with touchscreen • Qirox technology interface • Tool controller ctms • Tcp measuring device Extra Information Welding Technology Power source Arc sensor Water cooling module Control module Wire drive unit Robot welding torch Software Parameter grinding Distance-dependent transition between parameter lists Multi-layer technology Programmable pendulum figures Software language: German IRPS Scanner Control IPC Rittal control cabinet Touch screen Isdpfoyaimlsx Ah Nsal Scanner interface Uninterruptible power supply Scan width: 1000 mm at 500 mm product height Scan speed: 300 to 1000 mm/sec Burner Cleaning Unit Torch cleaning device Compressed air amplifier Wire cutter Control Unit Digital inputs/outputs: 16 Serial interface Computer connection: QIROX controller CAN bus USB interfaces: 2 Flash memory: 8 GB Buffer module: 24V Point editor Expandable to up to 16 axes

Condition: new, The KSM 13 Tool Grinder from KNUTH is a compact and efficient solution for precise and cost-effective grinding of double-edged twist drill bits within the Tool Grinders category. This handy device offers simple operation, allowing users, even without prior knowledge, to achieve clean and precise results quickly. The KSM 13 features a motor rating of 0.12 kW and accommodates grinding diameters from 3 to 13 mm, making it versatile for various drilling needs. With included grinding wheels and common collets, it simplifies the process of chamfering the relief angle and point angle while ensuring optimal chip removal during the grinding path. This robust tool is an ideal addition to any tool crib, enhancing your grinding capabilities. Don't miss out on improving your tool maintenance; request a quote or buy now to obtain this indispensable tool grinder. Iaedpsnh Nu Uofx Ah Njl

Condition: used, range L-W-H 120x50x180 cm Industrial Metal Locker – 120 × 50 × 180 cm Sturdy industrial metal locker in a durable, heavy-duty design. Perfect for workshops, production, warehouses, or changing rooms. Long-lasting, easy to clean, and built for daily industrial use – plenty of space in a compact footprint. Dimensions: 120 × 50 × 180 cm (W × D × H) Features: • Metal construction • Strong and durable • Industrial-grade quality • Space-saving and practical Iedpfx Aheyackqe Njal Ideal as an industrial locker, workshop locker, or metal cabinet for commercial and industrial use.

Year of construction: 2021, operating hours: 1,149 h, condition: used, functionality: fully functional, machine/vehicle number: 10501438, This listing is for a hood-type dishwasher from the premium manufacturer Meiko, model DV 270.2, equipped with top-tier heat recovery. Year of construction: 2021, with only a total operating time of 1,149 hours or 1,917 wash cycles. The machine has been professionally tested and inspected. Included with the machine is a matching original Meiko inlet and outlet table combination; the pre-rinse table operates from right to left. Photos of the table assembly will be published soon. Meiko Hood Dishwasher / Pass-Through Dishwasher DV 270.2 / 1310 x 690 mm Iajdpfx Asyab Ibsh Nsl Specification: - Electrically heated - Two dynamic high-performance pumps - Integrated detergent and rinse aid dosing unit - Drain pump - Washing capacity: 30 / 15 / 7 racks per hour - Total connected load: 16.90 kW (hot water connection) - Total connected load: 22.90 kW (cold water connection) Special Features: - Suitable for heavily soiled and tall wash items - Wash pressure reduction for delicate items - Simultaneous cleaning of 3 transport containers (600 x 400 mm) side by side - Double-walled hood, heat and sound insulated - Easy cleaning of smooth interior walls - Rinse water consumption: 9.00 l per cycle Standard Equipment: - Simple operation with additional program start button - Three program run times - Digital temperature display for tank and rinse water - Infrared interface for service data exchange - Efficient analysis and documentation system (MIKE 2) - Extra-large insertion height: 650 mm - Ergonomic all-around handle - Steam is extracted and energy-efficiently returned to the machine via heat recovery system - Pressure boosting pump - Soft start - Aqua-stop system with leak water switch - Wash and rinse arms, as well as fixed lines, made of stainless steel - Reversing wash arms for comprehensive cleaning performance - Splash and water jet protection class: IPX5 Hygiene Features: - Fine filter system for the solution - Deep-drawn, rounded wash tank - Self-cleaning program - Integrated hygiene/operation logbooks Scope of Delivery / Accessories: - Stainless steel rack with rollers - Dimensions: 1,490 mm x 1,165 mm x 1,792 mm (W x D x H) - Manufacturer: Meiko - Model: DV 270.2 - Voltage: 400 V - Weight: 392.00 kg - Drain pump: Yes - Water softener: No - Detergent & rinse aid: Yes Shipping: Delivery or self-collection by arrangement. Worldwide shipping upon request. Shipping to islands or mountain stations only by agreement. Do you have questions, need consultation, or would like to view the item onsite? You can contact us by phone during our business hours: Monday-Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is exclusively based on our general terms and conditions (AGB).

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, year of last overhaul: 2026, total height: 1,120 mm, total length: 715 mm, total width: 2,210 mm, type of input current: AC, overall weight: 170 kg, control voltage: 24 V, Lye Application Machine Riehle RMBB 2 lye curtains Stainless steel construction Simple technology For baking trays 580 x 780 mm With tilt mechanism DGUV V3 tested – exclusively available from us Connection: 230 V Used machine, cleaned & SAB inspected With warranty and spare parts service Option: Salter Maintenance contract Service package Spare parts box Delivery service Instruction & commissioning We have many more bakery machines in stock! Iasdpfx Ahjyakk Sj Nol

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, load capacity: 360 kg, arm reach: 2,826 mm, controller model: KRC4, repeat accuracy: 0.08 mm, number of axes: 6, The machine has been completely overhauled (cleaning, oil change, mechanical maintenance, repeatability and load tests)! TECHNICAL DETAILS Payload: 360 kg Arm reach: 2,826 mm Position repeatability (ISO 9283): ±0.08 mm Number of axes: 6 Additional load capacity max.: Rotating column: 550 kg Link arm: 130 kg Arm: 150 kg Range of motion: A1: ±185° A2: −130° / +5° Isdpfx Ahex Syg Ij Njal A3: −110° / +162° A4: ±350° A5: ±120° A6: ±350° Axis speeds (rated load): A1: 103°/s A2: 94°/s A3: 100°/s A4: 117°/s A5: 110°/s A6: 163°/s MACHINE DETAILS Control model: KRC4 Dimensions & weight Base area: 968 × 944 mm Robot weight: approx. 1,660 kg EQUIPMENT Manipulator KRC4 control cabinet Complete cable set Teach pendant

Year of construction: 1998, condition: ready for operation (used), overall weight: 2,200 kg, This KASTO SSB 260 VA-CC-CNC Metal Band Saw was manufactured in 1998. A reliable choice for your cutting needs, it offers precision and durability. Consider the opportunity to buy this KASTO SSB 260 VA-CC-CNC Metal Band Saw. Contact us for more information. Additional equipment • Accessories: 18 saw bands (see photos) Iodpfeyaii Tox Ah Nsal Machine Benefits Technical Machine Benefits • Dimensions of the entire system: length 2160 mm /width 2080 mm/ height 2030 mm / total weight approx. 2 200 kg • Total drive power approx. 6. 5 kw/ saw motor approx. 4. 0 kw/ cutting range round 260 mm /cutting area square 260 x 260 mm /smallest diameter to be sawn 10 mm /smallest cut-off length 5 mm • Minimum offcut length single cut 10 mm/ minimum offcut length in automatic mode 110 mm/ automatic material feed single max. 600 mm multiple material feed (up to 9x) 400 mm /belt speed: mm infinitely variable 15 - 125 m/min /cutting feed: infinitely variable /material feed: hydraulic • Automatic feed: with horizontal clamping /material clamping: hydraulic, infinitely variable /clamping force: horizontal vice (sp l) 150 - 800 dan /feed vice (sp ii) 150 - 800 dan • Saw blade dimensions 4115 x 41 x 1. 3 mm /saw blade guide: carbide, replaceable /saw blade tensioning: hydraulic saw blade cleaning: hydraulic with easily replaceable wire brush. Driven via flex shaft in the same ratio as the main drive driven. • Supply via coolant nozzle/ volume 100 1/ pump capacity 50 l/min. Extra Information Machine still under power

Condition: refurbished (used), Year of construction: 2026, center height: 100 mm, center width: 680 mm, total length: 620 mm, grinding diameter: 199 mm, Condition of the machine: The machine is currently in a used, unrevised condition. All wearing parts of the machine are replaced, including the feed spindle in the X-axis, and all assemblies are restored to a new condition. After the revision, the machine is easily comparable to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to a new condition. After the work is completed, the machine receives a measurement report according to the manufacturer's original specifications. Electronics: The electronics and the control cabinet housing are completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is overhauled and the hydraulic lines are replaced with new lines. Iajdpfov Hqlrex Ah Nsl Painting: As soon as the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are freed of the old paint, cleaned and repainted. Technical data of the machine: Center height: 100 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel: 350 x 50 x 127 Weight and space requirement of the machine: 2600kg // 2320x1400x1450 mm Machine equipment (standard): • 1 piece grinding headstock Ø35 • 1 piece workpiece headstock MK5 • 1 piece protective cover for discs Ø 400 mm • 1 piece tailstock MK 3 standard • 1 piece flange Ø 127 mm • 1 piece hydraulic unit • 1 set of operating tools and operating instructions

Condition: used, Year of construction: 2018, Technical specifications: Processes: Washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50 Hz + N + PE Iodpowf U Ruofx Ah Njal Compressed air connection: 6 bar Power consumption: 76 kVA Machine at a height of 1.6 m: n/a Vibrations: none Maximum payload: 200 kg Wash tank: 900 l Rinse tank: 900 l Oil separator: 200 l

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: E11SI17062595708, This listing is for a Rational SCC 101 WE combi steamer in electric version, from the premium manufacturer Rational. The unit comes from the SCC series, featuring triple glazing and LED lighting. The combi steamer has been inspected in our in-house workshop and is fully functional. The underframe shown in the pictures is not included in the offer, but can be purchased separately as an option. RRP: €12,920 net. You will receive an invoice with VAT shown separately. Service: We are happy to assist with arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance type? Feel free to ask—we have access to an extensive range of new and used equipment. We are happy to advise you on all appliance types. Our used equipment service for you: - 6 months warranty on electrical parts, limited to replacement of defective parts, excluding installation and removal costs - High-quality branded equipment at fair prices - Professional refurbishment / inspection & expert cleaning - Tested & fully functional - or your money back - Flexible shipping or self-collection options - Competent advice – before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - DGUV V3 safety inspection This combi steamer accommodates 10 x 1/1 GN containers. In automatic mode, the unit independently detects the ideal cooking path, product size, load quantity, and product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: - WxDxH: approx. 847 x 776 x 1042 mm - Minimum door opening for delivery WxH: 845 x 1050 mm - Power connection: 400 V / 18.6 kW / 50-60 Hz - Capacity: 10 x 1/1 GN - Weight: approx. 132 kg - Serial number: E11SI17062595708 - Year of manufacture: 2017 Condition: used, fully operational Iaedpfx Asx U Snvsh Njl Additional features: - 3 operating modes in combi-steamer mode: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C) - Care Control - self-cleaning program - Core temperature probe - Hand shower with automatic retraction - 8.5" color display and touchscreen - 5 programmable fan speeds - Integrated, maintenance-free grease separation system - Automatic start time preselection - 7 cleaning levels for unattended cleaning – including overnight cleaning - 3-stage steam injection, adjustable from 30°C to 260°C - 5 programmable fermentation levels - USB interface - Seamless, hygienic cooking chamber with rounded corners - Halogen cooking chamber lighting Shipping: - Delivery or self-collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by prior arrangement Subject to change and error. Do you have questions, need advice, or would like to view the equipment on-site? You can reach us by phone during our business hours: Monday to Friday, 9:00–13:00 and 14:00–17:00. Sales are made exclusively according to our general terms and conditions (GTC).

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 01/2027, overall weight: 195 kg, total length: 655 mm, total width: 720 mm, total height: 1,400 mm, ejection height: 470 mm, Ismar Junior 4 Bread Residue Crusher Suitable for all types of light/dark leftover bread, etc. "The Universal Crusher" Ismar Model: Junior 4 Bread Residue Crusher Simple, robust technology DGUV V3 tested – exclusively by us Connection: 400V, 16A-CEE plug Dimensions: 850 x 950 x 1485 mm (W x D x H) Used machine, cleaned Options: Service package Maintenance contract Delivery service Training & commissioning We have many more bakery machines in stock! Iaodpjyakh Refx Ah Nsl

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Iaedpfox Edmpex Ah Nsl Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Weight:

Year of construction: 2025, condition: ready for operation (used), This Barberan WM-33 was manufactured in 2025. A profile wrapping machine designed for versatility, it handles various materials including PVC and aluminum. It supports a wide range of foil types and utilizes PUR hot melt adhesives. Key features include a max mechanical speed of 60 m/min, profile dimensions up to 300 mm wide and 120 mm high, and a total machine length of 6000 mm. Contact us for more information about this machine. Additional equipment • Machine bed, slot nozzle head, mounts for wrapping tools • Complete tool set for PVC/Aluminum profiles • Operator safety system and control cabinet • Set of nozzles for profile cleaning • Protective foil unwinder and hot air turbines • Infrared screen with lamps and tool cassette Machine Benefits Qualitative Machine Benefits • Machine entry section with heavy-duty steel frame • Transport rollers with motor-driven frequency converter • Integrated control cabinet • Emergency safety systems • Glue unit safety mesh • Operator control panel for adhesive management • Two 15 mm wide rollers per shaft, 240 mm diameter • Quick positioning in 5 mm steps • Air blowers & ionization for static and dust removal • Automatic primer station with precise application Technical Machine Benefits • The profile wrapping machine is designed to wrap profiles of various shapes, sizes, and materials using different foils with hot melt adhesives. • Operates as a standalone unit or part of a complete production line. • Capable of working with materials such as pvc, aluminum, and some composites. • Various foil types are compatible, special configurations may be needed for certain materials. • Profile dimensions: width 25–300 mm, length ≥600 mm, height 4–120 mm • Foil dimensions: width 25–330 mm, outer roll diameter ≤600 mm, inner roll diameter 76 mm • Max mechanical speed: 60 m/min • Working height: 900 mm • Voltage: 400v – 50hz • Compressed air: 6 bar Extra Information Machine still under power. Iedpfxjyaa Uts Ah Neal 6 self-regulating heaters, expandable to 8. Slot Nozzle Head (330 mm) for adhesive application. Roll diameter up to 600 mm. Magnetic powder brake for tension control. Infrared screen for foil heating. Foil applied with shaped rubber rollers. Quick profile shape change system. For foil rolls up to 600 mm diameter. Height-adjustable for pressure control. The system is versatile with components designed to enhance processing efficiency and adaptability for various production needs. Dimensions Machine Depth 6000 mm

Condition: excellent (used), functionality: fully functional, overall weight: 34 kg, input voltage: 230 V, DGUV certified until: 01/2027, Cream Whipping Machine Hobart Model: G 5 R Tabletop model for 3–5 litres of raw cream Timer: 1 to 6 minutes Stainless steel bowl up to 5 litres Connection: 220V Iedpewpz Etofx Ah Nsal Dimensions: 410 x 410 x 530 mm (W x D x H) Used equipment, cleaned and tested Options: Delivery service Spare parts service Maintenance contract Service package Visit our showroom!

Condition: ready for operation (used), Year of construction: 1993, controller manufacturer: SIEMENS, controller model: Sinumerik, This 4-axis CHIRON FZ 18 W was manufactured in 1993. It features dual 4th axes and is equipped with a SIEMENS SINUMERIK control system, enhancing its precision and efficiency. The addition of a chip conveyor aids in maintaining a clean work environment. Consider the opportunity to buy this CHIRON FZ 18 W vertical machining center. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Iaodpfxsyaaduo Ah Nsl • Axes: 4 with 2x 4th axis

Condition: excellent (used), functionality: fully functional, Unox Bakerlux Stefania Loading Oven Iodpjyaf D Hofx Ah Njal Convection oven for 3 trays, 460 x 330 mm Stainless steel design with exhaust hood Manual control Direct water connection for steam injection 230V connection Dimensions: 600 x 665 x 720 mm (W x D x H) Used oven, cleaned Options: Water filter Maintenance contract Spare parts box Delivery service Instruction & commissioning Visit our large Unox showroom!

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 4,000 rpm, travel distance X-axis: 615 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 1,585 mm, number of slots in tool magazine: 72, number of axes: 7, This 7-axis Mazak Integrex i-300ST-1500U lathe was manufactured in 2012. It features a main spindle bar passage of 80mm, a tool changer with a capacity of 72 tools, and a milling spindle speed of 12,000 rpm. Additional highlights include a high-pressure cooling system at 14 bar, a chip conveyor, and a mist filter unit. Ideal for prototype production, the machine includes tooling, chucks, and jaws. For more information about this lathe, please reach out to us. Additional equipment • Mist filter unit • High pressure cooling (14 bar) • Work space rinse cleaning (2.7 bar/60 l) • RMP600-Radio/Radio probe • Preparation for 70 bar cooling through spindle • Programmable overload detector • C-axis on second spindle • MO321 - Gear milling without tool • TE810 - Preparation for Multi and Flash tools • NO117 - Tool edge control for 5-axis continuous / Axes movements: X / Y / Z / X2 / Z2 615 / 250 / 1585 / 230 / 1388 mm / W 1539 mm / C-axis indexing 0.0001° Machine Benefits Qualitative Machine Benefits • Comprehensive equipment for diverse machining operations (turning, milling, drilling, threading, etc. ) • Used exclusively with mazak service technicians Ijdpfx Ajx U Txioh Nsal • Lower turret number of tools 9 Technical Machine Benefits • Main spindle bar passage: 80mm • Milling head (b axis) speed: 12. 000rpm • No123 - tool radius correction for 5-axis continuous control • No137 - eia dynamic compensation i • No092 - synchronous threading for driven tool • Eia/iso continuous 5-axis control • Extensive tool capacity with 72-tool magazine (hsk-63 holders) • Advanced 5-axis continuous control with various compensation and correction features • Max. Machining diameter 658 mm / max. Machining length 1519 mm / max. Workpiece weight 450 (1st spindle) / 400 (2nd spindle) kg • Main spindle motor power 30 (30 min. ) / 22 (continuous) kw / subspindle motor power 26 (30 min. ) / 22 (continuous) kw / Extra Information Machine still under power

Year of construction: 1980, condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, controller manufacturer: HEIDENHAIN, controller model: 426, spindle speed (max.): 2,500 rpm, table length: 1,800 mm, table load: 12,000 kg, table width: 1,800 mm, number of axes: 4, This 4-axis TOS WHN 13.8 CNC boring machine was manufactured in 1980 and retrofitted in 2001. It features a working spindle diameter of 130 mm, a clamping cone 50 ISO, and a spindle speed of 2500 rpm. The machine supports a table load capacity of 12000 kg and includes SIEMENS motors and drives. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 CNC machine we have for sale. Contact us for more information. Machine Benefits Isdpfx Ahsx U Ttms Njal Qualitative Machine Benefits • Retrofitted in 2001 • Refurbished in 2024 • 6-month warranty on mechanical parts Technical Machine Benefits • Working spindle diameter: 130 mm • Clamping cone: 50 iso Extra Information Machine still under power / 6-month warranty on mechanical parts // Scope of refurbishment (2024): ■ Cleaning the machine ■ Checking and adjusting the machine geometry ■ Regrinding the spindle cone ■ ...possibility of replacing the spindle for an additional fee ■ Checking the machine's functionality ■ Revision of the electrical equipment ■ Revision of the hydraulics and lubrication ■ Adjustment of clearances and optimization of drives ■ Replacement of the guide surface wipers ■ Repair of the telescopic machine cover ■ Replacement of the balancing ropes ■ Repair of the platform ■ Revision of the cooling CHZ13