Used Cyclone for sale (236)

Condition: used, This listing is for the Clifton Cyclone Vortex Mixer The unit is in full working condition and is ready for immediate use Nwsdpfxexv Azms Adxen The Clifton Cyclone Vortex Mixer is a high-performance laboratory device engineered for rapid and efficient mixing of liquids in test tubes and small vessels. It creates a powerful vortex in the tube, enabling highly effective and uniform mixing without the need for stirring rods or manual agitation.

Condition: excellent (used), Year of construction: 1996, Compair Cyclon 6000N screw compressor 75kw Nedpfx Adeh Unhnoxewn power: 75 Kw air transport : 12.9 /min :774 m3/h pressure: 8 bars voltage: 400v 50Hz 3 phase Construction of year: 1996 hours:51000h weight: 1800 kg Size: length: 2100mm width: 1700mm Height: 1510mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: ready for operation (used), Year of construction: 2004, screw diameter: 125 mm, Single screw extruder manufactured in 2004. This EUROTECNO E12535D features a screw diameter of 125 mm and an L/D ratio of 35:1, with an output capacity of approximately 350 – 550 kg/h. It includes a high-efficiency heating system with 6 to 8 independent zones and a double vacuum degassing system. If you are looking to get high-quality extrusion capabilities, consider the EUROTECNO E12535D machine we have for sale. Contact us for further details. • Screw type: Single screw • L/D ratio: 35:1 (35D) • Number of screws/mechanical shafts: 1 • Output capacity: Approx. 350–550 kg/h (material dependent) • Main motor: AC electric with inverter drive (VFD), 110–160 kW (standard for Ø125 mm) • Screw speed: Electronically adjustable, approx. 0–120 RPM • Transmission: Heavy-duty, oil-cooled gearbox • Barrel heating zones: 6–8 independent zones • Heater type: High-efficiency ceramic band heaters • Barrel cooling: Forced-air cooling fans per zone • Degassing/venting: Double vacuum degassing system with liquid ring pump Additional equipment • Feeding system: Force feeder / crammer hopper for film flakes and shredded regrind • Screen changer: Continuous hydraulic dual-plate screen changer Njde Af U Dnspfx Adxjwn • Pelletizing: Hot die-face water-ring pelletizer • Cooling & dewatering: Horizontal centrifugal dryer and vibrating classifier screen • Conveying & storage: Pneumatic blower to cyclone and bagging silo

Condition: like new (used), Year of construction: 2026, Cyclone separator / extraction system in a robust, welded design Nsdpfx Adjztzmvjxown optional: rotary valve fan piping steel frame please specify the required air flow rate in m³/h when requesting a quote.

Condition: ready for operation (used), * Brand: Sotres Nwedpfx Ajz Sy Nlsdxen * Type: cyclone * Dim. cyclone: 3500 mm Length , Diameter 1100 mm. * Incl.: steel construction.

Condition: good (used), Year of construction: 2017, Insulated cyclone by GEA, model CYCLONE CHE 394. Year 2017. With 2 reinforcement brackets. Bottom outlet DN100. Njdpfxey Hfxrs Adxjwn Top inlet Clamp 1". Side inlets Clamp 1" and 4". No documentation available. Cyclone dimensions: Length: 650 mm Width: 560 mm Height: 1510 mm

Condition: good (used), Year of construction: 2013, operating hours: 35,050 h, functionality: fully functional, machine/vehicle number: NS4330, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 600 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 52 kVA, controller manufacturer: FANUC, controller model: 31i, workpiece height (max.): 750 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 3,020 mm, total length: 5,363 mm, total width: 2,500 mm, table width: 450 mm, table height: 1,200 mm, table length: 450 mm, table load: 400 kg, rotary table diameter: 450 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 15,000 rpm, overall weight: 11,500 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 50 bar, spindle motor power: 22,000 W, spindle nose: BT40, number of slots in tool magazine: 120, tool length: 350 mm, tool diameter: 140 mm, tool weight: 8,000 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer a Toyoda FH450S, 4-axis horizontal CNC machining center, manufactured in 2013 (April 2013), purchased new and installed at our facility in 2015. It is in good used condition. Manufacturer: Toyoda (JTEKT) Model: FH450S Serial Number: NS4330 Year of Manufacture: 2013 Condition: Used, good condition Main Specifications: - CNC Control: FANUC 31i (1,000 programs, 499 tool offsets, 48 coordinate systems, Ethernet card, program restart) - X/Y/Z Travels: 600 / 600 / 600 mm - 2 pallet changers, 450 x 450 mm, with automatic pallet changer (7 s) - Maximum load per pallet: 400 kg; maximum workpiece size Ø 630 x 750 mm - B-axis: continuous NC table, resolution 0.001° - Spindle: BT40, 50 - 15,000 rpm, power 22 / 18.5 kW (30 min / continuous) - Rapid Traverse Rates X / Y / Z: 50 m/min; roller guides - Positioning Accuracy: ±0.003 mm, Repeatability: ±0.0015 mm - Tool Magazine: 120 positions (expanded from 60); tool change time 1.2 s - Power Supply: 380 V - 3-phase - 50 Hz, 52 kVA - Machine Weight: 11,500 kg; footprint 2,500 x 5,363 mm, height 3,020 mm Nwsdpfx Ado Ad Rn Uoxjn Additional Equipment: - Coolant through spindle with 30 µm fabric filter and approximately 800-liter tank - Pump: 45 l/min at 50 bar - Toyoda chip evacuation system with 70 bar pump and cyclone filter - Knoll chip conveyor for cast iron and aluminum, oil skimmer - Renishaw RMP60 probe with software and measuring programs - Toyoda OP Supporter 20i tool load monitoring system - BTS sensors for thermal expansion of axes and spindle - Preparation for FMS Fastem connection - Manuals: 3 sets of Toyoda and 2 sets of Fanuc; CE marking Machine Hours (as of 10/07/2026): 35,050 h - Parts Produced: 87,681 Clamping devices, tools, and tool holders: to be agreed upon. Complete technical data sheet with photos available upon request. Available for viewing by appointment. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2013, operating hours: 29,512 h, functionality: fully functional, machine/vehicle number: NS4331, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 600 mm, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 52 kVA, controller manufacturer: FANUC, controller model: 31i, workpiece height (max.): 750 mm, workpiece diameter (max.): 630 mm, workpiece weight (max.): 400 kg, total height: 3,020 mm, total length: 5,363 mm, total width: 2,500 mm, table width: 450 mm, table height: 1,200 mm, table length: 450 mm, table load: 400 kg, rotary table diameter: 450 mm, rotational speed (min.): 50 rpm, rotational speed (max.): 15,000 rpm, overall weight: 11,500 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 45 bar, spindle motor power: 22,000 W, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 120, tool length: 350 mm, tool diameter: 140 mm, tool weight: 8,000 g, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer a Toyoda FH450S, 4-axis horizontal CNC machining center, manufactured in 2013 (March 2013), purchased new and installed at our facility in August 2016. It is in good used condition. Manufacturer: Toyoda (JTEKT) Model: FH450S Serial Number: NS4331 Year of Manufacture: 2013 Condition: Used, good condition Key Specifications: - CNC Control: FANUC 31i (1,000 programs, 499 tool offsets, 48 coordinate systems, Ethernet board, program restart) - X / Y / Z Travel: 600 / 600 / 600 mm - 2 perforated pallets, 450 x 450 mm, with automatic pallet changer (7 s) - Maximum pallet load: 400 kg; maximum workpiece size Ø 630 x 750 mm - B-axis: NC rotary table, resolution 0.001° - Spindle: BT40, 50 - 15,000 rpm, power 22 / 18.5 kW (30 min / continuous) Njds Ad Rhnjpfx Adxjwn - Rapid Traverse Rates X / Y / Z: 50 m/min; roller guides - Positioning Accuracy: ±0.003 mm, repeatability ±0.0015 mm - Tool Magazine: 120 positions (expanded from 60); tool change time 1.2 s - Power Supply: 380 V - 3-phase - 50 Hz, 52 kVA - Machine Weight: 11,500 kg; footprint 2,500 x 5,363 mm, height 3,020 mm Additional Equipment: - Through-spindle coolant with 30 µm fabric filter and approximately 800-liter tank - Pump: 45 l/min at 50 bar - Toyoda chip evacuation system with 70 bar pump and cyclone filter - Knoll chip conveyor for cast iron and aluminum, oil skimmer - Probe

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Nwedpez I Iv Rsfx Adxjn Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: used, functionality: unexamined, machine/vehicle number: siehe Beschreibung, Dust extraction system: - 57,000 m³/h - Bag filter type RTFAE550S-JET-SF (without filter bags, the old ones have been disposed of) - Screw conveyor type TRFS400ATEX - Rotary valve type RTZ5050ATEX-S-CR-SEW - Cyclone type RTZA2500-D - Baffle silencer - Compressed air compressors + tank type ALUP Largo 15, 15 kW motor Nwjdpfxey Rziho Adxjn

Condition: ready for operation (used), * Brand: Schauenburg * Model: cyclone * Length: 3100 mm * Diameter: 880 mm Nsdpfx Adoywmptexjwn * On stock: 3 pieces.

Year of construction: 1959, condition: used, functionality: fully functional, machine/vehicle number: 59/4235, We are offering this used Probat UG 22 drum roaster, manufactured in 1959, which was completely overhauled in 2010 and has been in use at our facility since 2011. It is a gas-fired model and includes a destoner, cyclone, cooling sieve, and chimney. This machine was used in our production until recently and initially roasted 2 tons, and later around 10-15 tons of green coffee. It was completely overhauled in 2010, including new electrical components, and has been running reliably ever since. We are selling it because we are closing down the business. Type: UG 22n Serial number: 59/4235 Year of manufacture: 1959 Heating: Gas [natural gas] Voltage: 230/400 V Current: 16 A Frequency: 50 Hz Temperature sensor: retrofitted, WLAN-enabled, for digital recording of the roasting curve [e.g., Artisan] Included in the scope of supply: Destoner Cyclone Nwsdjz I Tyzopfx Adxsn Cooling sieve Chimney Connecting pipes --> Ready for immediate use If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2021, total height: 1,800 mm, total length: 1,200 mm, total width: 1,000 mm, overall weight: 150 kg, hose length: 10,000 mm, space requirement height: 1,800 mm, space requirement length: 1,200 mm, space requirement width: 1,000 mm, transport length: 1,200 mm, transport width: 1,000 mm, transport height: 1,800 mm, tank capacity: 50 l, No. 04521 Cyclone pre-separator ESTA ZA 50 Unused, year of construction 2021, in new condition Filter relief for very large amounts of dust The stationary cyclone pre-separators are installed upstream of the actual filter unit and are used to pre-separate dry and free-flowing dusts. Medium and coarse dust particles are already separated in advance so that only the fine dust still needs to be filtered. This reduces the operating costs of the entire extraction system. Cyclone pre-separators achieve a separation efficiency of more than 90% with an average particle size of at least 150 microns. Top cyclone diameter 282 mm Cyclone height 1458 mm Dust container 50 liters Top connection pipe diameter 50 mm Container connection pipe diameter 82 mm Nwsdpfx Ajx Upqhsdxon Including approx. 10 m suction hose, diameter 50 mm Transport dimensions approx. 1200 x 1000 x 1800 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Year of construction: 2019, operating hours: 5,600 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: DRPL/LP29, Equipment: CE marking, PELLET PRODUCTION LINE – COMERC – CAPACITY 2 T/H Pellet production line with a capacity of 2 t/h, line length 25 m. Raw material: sawdust (spruce, pine, larch). Operating hours: 5600 h. The complete line includes: Sawdust hopper – 80 m³ Screw conveyor from the hopper – length 6 m Sawdust bucket elevator – length 7 m Buffer tank – 1 m³ for the humidification station Humidification and moisture stabilization station Sawdust bucket elevator – length 7 m Granulator buffer tank – 1.5 m³ Screw conveyor to the granulator – length 2 m RMP 520 Munch granulator Acid-resistant bucket elevator – length 8.5 m Gallen Cuntelfloor pellet cooler Pellet sifter Bucket elevator – length 8.5 m Finished pellet storage tank – 3 t Manual bagging machine – 2–3 people, up to 20 t/shift JKF 15 kW fan for aspiration Aspiration system – extraction from the entire line Cyclone – diameter 1 m Control cabinets – complete Control, measurement and actuation equipment, moisture sensors (2 units) Explosion-proof early spark detection and extinguishing system Visual process overview to be implemented along with the control panel Installed power 217 kW We can send more photos and specifications to interested parties via email. The line is in working condition. Disassembly of the line is the responsibility of the seller. Collection and transportation of the machine is the responsibility of the buyer. We also offer assistance with reassembly, commissioning, and service support. On-site inspection is possible. Nedpfez Hw Umex Adxjwn

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Nwodpfx Adez Rnu Texen Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: used, ITW Gema QCS 03 25-310 Complete Automatic Powder Coating Line, Powder coating system, Used machine Manufacturer / System: ITW Gema AG (Switzerland) & Recycolor Kft. Type / Model: GEMA QCS 03 25-310 (Powder coating booth) Nwsdpfx Ads Af I Hdoxsn Year of manufacture: 2008 Serial Number: 5008-03012 (GEMA) / 16/2008 (Recycolor) Condition: Used, good industrial condition Dimensions and capacity: - Current layout footprint: 27 m x 18 m (system components can be reconfigured or modularly installed according to buyer needs) - Maximum workpiece size: 2500 x 800 mm - Conveyor line speed: High-capacity, 2 m/min - Exhaust air volume (booth): 16,000 Nm³/h - Cyclone dust collector extraction capacity: 8000 m³/h - Permissible organic powder concentration: 25 g/Nm³ (certified powder), 10 g/Nm³ (uncertified powder) - Zone 22 Main system components and technical specifications: 1. Surface Pre-treatment Tunnel (Recycolor Kft.): - Continuous multi-zone degreasing, (phosphating), and rinsing system. - Final rinse zone: DI (demineralized) water rinse stage. - Construction: Watertight PP sheet housing with drip zones and partition plates to minimize cross-contamination. - Lower zone tanks equipped with internal filters, circulation pumps, and fitting assemblies. - Dehumidification / Exhaust: Fan extraction with droplet separator. - Control system: Fully automated PLC control. 2. ITW Gema QCS 03 25-310 Powder Coating Booth & Recovery System: - GEMA quick color-change booth with integrated overhead conveyor. - Double-sided automatic powder coating with 4+4 (total 8) spray guns with 2500 mm vertical stroke. - Pre-touch manual spraying area at the inlet for complex geometries. - Mono-cyclone powder recovery system and absolute filter with built-in exhaust fan. - Bottom cone with swing-out sieve unit for automatic or manual powder recycling. 3. Water Drying and Powder Curing Oven (Recycolor Kft.): - Fuel type: Natural gas - Main gas burner: Weishaupt WG30N/1-C/ZM-LN 3/4" W-MF (Max. output: 320 kW, supply pressure: 100 mbar) - Gas-infrared burners: INFRATEC / Honeywell CVI-r1 - VK4115V (24 units x 10 kW/unit = 240 kW total power, max. 50 mbar) - Air recirculation: 2x MA-62/1440 fans (2 x 15,000 m³/h flow rate, 2 x 7.5 kW motor power) - Design: Thermal-bridge-free sandwich panels with internal framework and "A-shape" thermal lock entry/exit to retain internal hot air. - Operating temperature range: Adjustable between 60 – 220 °C.

Condition: good (used), 1 x Weighing and Bagging System Comprising of: - VFFS Bagger, 10 head multihead weigher, bucket elevator, outfeed conveyor, ICE printer, gantry rails on 3 sides. Cyclone 200B spec; Max speed 80 bags per min Bag width 60-200mm Nwedpfx Adjzgc H Dexsn Beg length 50-280mm Power supply 3 phase .375kw Comes with Ice printer *Please note that this machine does not come with steps - only the gantry rails on 3 sides* *UKFM can quote for dismantle of the system and delivery to mainland UK*

Year of construction: 2020, condition: refurbished (used), Dear customers, Nedeftb Ebjpfx Adxswn To ensure a fast and reliable response to your inquiry, we kindly request that you contact us preferably via email. This way, we can directly assign your request to the appropriate contact person, gather all information and documents completely, and process your inquiry as quickly as possible. We look forward to hearing from you and are happy to assist you! For suction diameters from 120 to 700 mm. Please let us know your volumetric flow rate, and we will select the right cyclone for you. Various designs available: - Legs, made of painted square steel profiles - Cell wheel lock and transition piece with inspection flap - Inlet box with check valve - Tangential outlet with/without pressure relief area - Square outlet with/without pressure relief area - Sound insulation Of course, you can also purchase all accessories from us, such as fans, suction pipes, deflector hood, etc. Mode of operation: The contaminated air is introduced tangentially into the cylindrical upper part, causing the air to rotate. The material is forced outwards towards the circumference of the cyclone under the influence of centrifugal force and is discharged through the hole in the bottom. The cleaned air leaves the cyclone through the centrally located outlet pipe at the top. The separation efficiency increases with the feed rate, but so does the pressure loss and, consequently, the energy consumption. Therefore, it is important to find a good compromise. We have developed a range of cyclones that are optimized for filtering large quantities of material. They are therefore very well suited for the wood/paper/recycling/grain and feed industries. Below, you can select the cyclone with the right size based on the air volume and a typical pressure drop in the range of 1000 Pa. Operating pressure +/- 5000 Pa

Condition: used, Year of construction: 1982, center height: 125 mm, grinding length: 650 mm, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Grinding diameter: 250 mm Grinding length: 650 mm Center height: 125 mm Distance between centers: 650 mm Grinding length in plunge grinding: 80 (100) mm Grinding depth in internal grinding: max. approx. 170 mm Grindable bore: max. 90 mm Workpiece weight: max. 80 kg Nsdpfx Ae Aa Ai Ajdxewn Distance between workpiece spindle and tailstock center: 960 mm Spindles Internal grinding spindle speed: 9,500–50,000 rpm Grinding wheel diameter: max. 400 mm Spindle bore: 30 mm Workpiece tailstock can be swivelled: 90° Feed and table movement Workpiece table speed: 50–10,000 mm/min Feed rate: 240 mm/min Cooling Coolant consumption: 36 l/min Drive and power Spindle motor drive power: 6.25 kW Connected power: approx. 10 kW Total power consumption: 8.5 kW Machine data Machine weight: approx. 3.4 t Space required: approx. 3.9 × 2.5 × 1.85 m Control and drive Control: Studer Drive: electric / hydraulic Speed control: stepless EQUIPMENT Tailstock with fine adjustment and hydraulic retraction Workpiece tailstock with increased accuracy Table air lift Hydraulically foldable dressing device Radius dressing device Hydro-cyclone filter Automatic grinding wheel balancing device Automatic dressing cycle with speed compensation Internal grinding device

Condition: excellent (used), Year of construction: 2023, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: WMMB848473934932, 2023 AIRTERM BIO - 500KW BOILER Complete with the following equipment Nwsdpfx Asy Ip Awodxsn 500 KW Bio Boiler 4 bar working pressure 110 degree working temperature Twig 500 Kw Biomass Burner Ultra Modern Control system 4 Meter Endress Fuel Discharge system Multi Cyclone Flue Gas Fan Boiler in perfect working condition and can be viewed at any time. Boiler is been replaced with larger boiler and will become available in September 2026

Condition: excellent (used), Year of construction: 2018, operating hours: 123 h, power: 770 kW (1,046.91 HP), heating capacity: 810 kW (1,101.29 HP), temperature: 110 °C, Equipment: hot water, Mawera Type FFU700RIA, fully automatic wood chip heating system with underfeed stoking. Output: 810 kW. Domestic hot water system, supply temperature max. 110°C. Year of manufacture: 2018. Components: boiler body, combustion chamber and pneumatically cleaned heat exchanger, screw conveyor, automatic ash removal screw, ash separator, multi-cyclone, flue pipes for connection to the chimney, flue gas fan, operating manual, machine manual, control unit, control cabinet. It can be inspected on-site in Germany. Already dismantled; the firebox is to be relined with refractory bricks. Nodpfo Abayusx Adxswn

Condition: used, Manufacturer : Venti Oelde Dust Cyclone, Dust Separator, HLZ-J 1600, used machine Nwjdszwxzrepfx Adxen Manufacturer: HLZ-J 1600 Volume flow: 14,000 Bm³/h Suction side: 400 mm Height: 5853 mm Diameter: 1695 mm Year: 2013

Condition: like new (used), Year of construction: 2021, operating hours: 2,183 h, functionality: fully functional, machine/vehicle number: SR25-055032021, total height: 2,295 mm, total width: 1,510 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 1,000 kg, input voltage: 400 V, year of last overhaul: 2024, control voltage: 400 V, operating temperature: 250 °C, input frequency: 50 Hz, space requirement height: 4,000 mm, space requirement width: 2,000 mm, Equipment: documentation/manual, Professional 25 kg Industrial Coffee Roaster SR25 in Excellent Condition. The machine was used lightly in a specialty coffee roasting facility. It has been regularly maintained and operated only by trained personnel. Total production approx. 1,200 kg/month the first year, used only occasionally thereafter. The equipment is no longer in use due to a change in business focus and is available for immediate delivery. Key Features: - 25 kg batch capacity - Precise temperature control - Consistent roasting quality - Quiet and efficient operation Industrial Specialty Coffee Roaster Coffed SR25 (2021) in like-new condition, only ~2,200 operating hours in total. The machine’s condition is like new, with no technical issues, always operated by trained staff. The business is still operational but has switched to larger machines. Nwjdexvxq Rspfx Adxsn The roaster has been decommissioned and is stored in a container, so on-site testing is not possible. However, a live video demonstration of the machine is available. Technical condition: - ~2,200 total operating hours - Excellent mechanical and cosmetic condition – looks and runs like new - No faults, no repairs, no defects - Regularly cleaned and maintained - Indoor commercial setup Included equipment: - Coffed SR25 roaster (25 kg batch) - Green coffee loader - Destoner system - Cyclone - Coffed afterburner - Control panel - Tools and accessories Full photo and video package available on request Live online demonstration Logistics: Location: Soeborg, Denmark Deinstallation support: Yes Assistance with loading and transport: No

Year of construction: 2017, operating hours: 1,000 h, condition: used, functionality: fully functional, Probat Probatone 5 MK2, manufactured in 2017. Nodpfsz E Rfisx Adxown The machine was ordered from Probat in 2017, installed in 2018, and used in production until the summer of 2024. It comes with an optional drum speed control and a pilot roasting system (for automatic roasting). A temperature probe for measuring exhaust temperature is also included, which works with a USB stick and a third-party plug-in. Both bean and exhaust temperatures can be viewed in software such as Artisan. The machine has been cleaned and serviced according to the Probat maintenance schedule. After being removed from production, the machine was fully cleaned and serviced, including disassembly and cleaning of the cyclone, lubrication of the bearings, and cleaning of the electrode. Important: The machine has less than 1000 production hours, as indicated on the screen counter. After being removed from production, the machine was used for a few test runs in the summer of 2025. It is in full working condition but has a few scratches on the paint, as shown in the pictures. It is possible to test the machine on-site, and assistance can be provided with transport arrangements.

Condition: used, Year of construction: 1994, nominal heat output: 600 kW (815.77 HP), temperature: 95 °C, Equipment: hot water, For sale: Mawera Type FU600RA wood-fired boiler, manufactured in 1994. Accessories included: all fans, flue gas cyclone, exhaust pipes, control system, and feed motor with a short screw conveyor. The fireclay lining has been renovated by a specialist company. The boiler has been dismantled and is available immediately. The boiler can be operated with wood chips and pellets. Nsdpfx Asz Eg Sredxjwn