4
Fan Höcker ZK 35/250/15.0
Cbuibdaiux
Like new
Motor : 400/690V AC , 15.0kW,B3,IP54, 1400U/min
Capacity : 5800m³/hour
8
Type: HF R 800-13 D DS3
Manufacturer: Hürner Funken
Year of manufacture: 2009
Documentation: no
Inspection: yes
Storage location: customer
Status: used / second hand
volume flow: 48000 m³/h (max.)
pressure: 2572 Pa
Motor: (direct drive)
Voltage: 400 V
frequency: 50 Hz
amperage: A
Power: 55 kW
revolutions: 1280 1/min
Connections:
Diameter: 800 mm (suction side inside)
-: 692 x 692 mm (pressure side inside)
Material: PVC (housing (fan wheel coated))
Dimensions: (total)
Length: ...
15
2 pieces Hermetically sealed centrifugal fans.
Mechanical seal with sealing water connection.
Manufacturer FIMA Maschinenbau
Type: RC4R U 125KBG GR360 MB160
Year of manufacture: 2004
Operating speed: 4398 rpm
Volume flow: 0,35 m³/s (1260m³/h)
Pressure increase: 175 mbar (17500 Pascal)
shaft power: 9,5 kW
maximum casing pressure: 1,5 bar
maximum medium temperature: 80°C
material medium touching parts impeller/ housing stainless steel 1.4462
electric motor: Siemens 11 kW EFF Class 2.
Iaridiez
Volt...
6
Hocker polytechnik gmbh
Type: 030-500-450-15,0-4 Year of construction:2014
2tkqtm
Engine: 15kw
this one I have 4x in stock
5
2 x fans / ventilators
-motor 3,6 KW
-n 2900 l/min
Bzw0ukn70d
Discover more used machines
4
1 piece unused radial blower for low pressure high air capacity (from old stock)
make WVT
three-phase motor 0,25 KW
Buewgruhwu
air flow mechanically adjustable
2
little used
Air capacity 5600 m3/h
P ges.: 5100 Pa
18.5 kW (160 L/B3) three-phase motor
2789 //min Impeller speed
Case position: LG0
KRS SPA 125-3 Belt pulley Motor
V-belt: 3 x SKR SPA LW 2360
Suction side: 280 FEF
Printing side: 300 B
Motor arrangement: RL
Belt pulley Impeller: KRS SPA 132-3
Cgomnixm
8-10 h Operating time
8.10 months Lubrication period
10-20 g grease / relubrication (1100 mPa/s viscosity)
7
Type: HF R 560-13 D DS3
Manufacturer: Hürner Funken
Year of manufacture: 2007
Documentation: yes
Inspection: yes
Storage location: customer
Status: used / second hand
volume flow: 20000 m³/h (max.)
pressure: 2306 Pa
Cbfosgalib
Motor: (direct drive)
Voltage: 400 V
power: 30 kW
Revolutions: 1792 1/min
Connections:
Diameter: 550 mm (suction side inside)
-: 550 x 550 mm (pressure side inside)
Material: PVC (housing (fan wheel coated))
Dimensions: (total)
length: 1500 mm
width: 142...
5
Centrifugal blower from Voith Howden.
Delivery volume: 202000 m³/h
Pressure increase: 4800 Pa
Nmefb
Rotational speed: 960 rpm
Shaft power: 421 KW
electric motor: 550 kW
Total weight: approx. 12000 Kg
Dimensions:
Width 3300 mm x length 6000 mm x height 4000 mm
Housing horizontally divided !!!
Frequency converter is included.
5
1 piece used radial blower for low pressure high air capacity
Jyzi9s0r
motor approx. 0,5 KW
2
Nominal size 450
Make no. 77020
V:15743 m3/h
n: 1573 min-1
n max: 2034 min-1
Nw: 19,60 KW
Greasing interval every 500 h
Pt: 262,85 kp/m2
Pst: 209,75 kp/m2
l: 1.2 kp/m3
Bk0cpchqk7
t: 20 C°
4
Two pieces centrifugal blower
Manufacturer: Kreisel
Type: LRMSDE 900-Z/R 30-L1
Type: 2 opposite suction nozzles
Speed: 1475 rpm
shaft power: 174,5 kW
B7otvygy9v
required motor: 200kW
volume flow: 128.300m³/h
pressure rise: 3280Pa
density of the medium: 0,79 kg/m³
maximum temperature of the medium: 160°C
total weight: 4100 kg
No more electric motor available !!!
4
Offer:
Leister M 63 B 2 side channel compressor Compressor
With function guarantee
Vter8q
Fabr. Leister
Type: M 63 B 2
0,26 KW , 400 Volt (three-phase current)
7
Radial blower
1 piece high pressure blower
Manufacturer: TLT
max. volume flow: 189.360 m³/h
Pressure increase: 11490 Pascal
Speed: 1485 rpm
Power requirement fan: 659 kW
Temperature medium: 40°C
Engine: VEM DKRAB 4516-4U (circulation cooling with air-air cooler)
voltage: 690V
H8lbxov
Output: 755 kW
length/width/ height: 5000mm/4500mm/4500mm
Total weight approx.: 12000Kg
Dismantling and loading is taken over by us.
11
Radial blower from Venti Oelde with intake silencer.
M0mz9mrc
!! Characteristic as picture attached!!
Volume flow: 46308 m3/h
Pressure increase: 4830 Pa / 48.3 mbar
Weight: 2750 kg
Temperature: 30°C
Speed: 1480 rpm
Engine: VEM 415 S4
Power: 110 kW
11
Only 1 piece is still for sale
M3onx
Volume flow 750 m³/min (45000 m³/h) pressure increase 5600 Pa; shaft power 84,6 KW; speed 1500 rpm. with swirl control vibration damper and intake silencer. Various bends and pipes are also available.
The casing and impellers are in excellent condition.
8
centrifugal fan, dust extraction fan, fan, suction, dust blower
-Motor power: 18.5 kW
-Speed: 2940 rpm
-Inlet connection: O 520 mm
-Connector output: 440 x 490 mm
-Impeller: O 500 mm
-Dimensions: 1700/1300/H1080 mm
Cx2to3wk
-Weight: 500kg
5
The industrial suction fan is in working position.
Bt7xlonnk3
7
centrifugal fan, dust extraction fan, fan, suction, dust blower
-Motor power: 37 kW
-Speed: 2940 rpm
-Inlet connection: O 420 mm
-Connection output: 450 x 300 mm
-Dimensions: 1700/1300/H1080 mm
-Weight: 500kg
Rqdmxnqe8
4
Lenght: 2,1 m
Width: 1,8 m
Height: 2,1 m
Weight: 3805 kg
Blower PAM HB950C in very good condition.
Gauge pressure :
- Max. pressure differential 1000 mbar;
- Max. flow rate 93,1 m3/min.
Vacuum:
- Max. pressure differential 500 mbar;
- Max. flow rate 91,65 m3/min;
Byxpqrinqg
- Max. rated motor power 200 kW;
- Pipe connection. 250 DN.
9
centrifugal fan, dust extractor fan, ventilator, exhaust, dust blower, blower, exhaust fan
-Manufacturer: CAT Blower, dust extraction fan exhaust fan type SQR
Hhms3san
-Motor power: 0.75 kW
-Speed: 2800 rpm
-Connection input: Ø 150 mm
-Connector output: 215 x 185 mm
-Impeller: Ø 260 mm
-Dimensions: 820/610/H480 mm
-Weight: 40kg
3
Lenght: 1,8 m
Width: 2 m
Height: 2,1 m
Robuschi Blower in very good condition.
Max pressure data:
- Pressure 700 mbar(g)/ 10 PSI;
- Capacity 4710 m3/h. 2770 CFM;
- Motor 132 kW/ 200 BHP;
- Noise 78 dB.
Chg7i2rky
Max vacuum data:
- Pressure 500 mbar (a)/ 15 IN. Hg.;
- Capacity 4500 m3/h 2648 CFM;
- Motor 110 kW. 150 BHP;
- Noise 78 dB(A).
5
Radial fan, chip extractor, fan, suction, chip fan
-Motor power: 15 kW
-Speed: 1460 rpm
-Volume flow: - m³/h
-Connection input: Ø 350 mm
Rrf8dgs32
-Connection output: 390 x 250 mm
-Dimensions: 1050/1150/H1080 mm
-Weight: 350 kg
5
* General * SKU254S1023 * LocationBarneveld * What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
B7je9enxjo
3
used, great condition
Make ESE
Type ESE 250-185
for chips
Motor 4.0kW
Connection diameter 250 mm
pressing 185 mm / ws
Air performance 3200 m³/h
B9oivm3ksv
steel impeller
vibration damper
Space requirement approx. 800 mm x 700 mm x 800 mm
Weight approx. 80 kg
Storage location 97447 Gerolzhofen, freely loaded, unpacked
Handover in the current condition as seen,
without guarantee and guarantee
3
Diameter 250 mm
Total length 2500 mm
Nadelfilz
Piyxp
5
Complete with ducting
B2vbwzuf
Dimensions approx. 575 diameter fixing plate
Internal ID 500mm
5
used fan
B0z9gujgpr
Year of manufacture: 1992
Condition: according to age
Engine 30,7 kW
V 21246 m³/h
2704 Pa
1660 1/min
Availability: short term
Location: Röllbach
5
Radial fan, chip extractor, fan, suction, chip fan
-Motor power: 22 kW
-Speed: - rpm
-Volume flow: - m³/h
-Connection input: Ø 280 mm
-Connection output: Ø 450 mm
-Dimensions: 1050/900/H920 mm
-Weight: 280 kg
Ecq2i9q9
5
Radial fan, chip extractor, fan, suction, chip fan
-Motor power: 15 kW
-Connection input: Ø 350 mm
-Connection output: Ø 250 mm
Llltf
-Dimensions: 1050/1060/H1240 mm
-Weight: 276 kg
5
Radial fan, chip extractor, fan, suction, chip fan
-Motor power: 45 kW
-Speed: 1470 rpm
-Volume flow: - m³/h
Ih3cr80pu
-Connection input: Ø 700 mm
-Connection output: 410 x 410 mm
-Dimensions: 1700/1130/H1660 mm
-Weight: 890 kg
5
Radial fan, chip extractor, fan, suction, chip fan
-Motor power: 37 kW
-Speed: 1470 rpm
Rlu3vwncz
-Connection input: Ø 600 mm
-Connection output: Ø 600 mm
-Dimensions: 1600/1400/H1800 mm
-Weight: 800 kg
5
Radial fan, chip extractor, fan, suction, chip fan
-Motor power: 18.5 kW
-Speed: 1460 rpm
-Pressure/volume flow unfortunately not visible
-Connection input: Ø 450 mm
-Connection output: Ø 450 mm
-Dimensions: 1400/1400/H2000 mm
Rrgbcslff
-Weight: 590 kg
5
Radial fan, chip extractor, fan, suction, chip fan
-Motor power: 15 kW
-Speed: 1455 rpm
-Pressure/volume flow unfortunately not visible
Rseju9xsx
-Connection input: Ø 400 mm
-Connection output: 400 x 350 mm
-Dimensions: 1350/1120/H1000 mm
-Weight: 370 kg
5
Centrifugal fan, dust extractor fan, fan, extractor, dust fan
-Motor power: 18.5 kW
-Speed: 3000 rpm
-Total pressure: 3300 Pa
-Volume flow: 15000 m³/h
-Connection input: Ø 450 mm
-Connection output: Ø 355 x 450 mm
-Dimensions: 1400/1220/H1100 mm
-Weight: 394 kg
I9b2pjt
5
Centrifugal fan, dust extractor fan, fan, extraction fan, dust fan, painting extractor fan
-for paint wall, paint booth
-Motor Ex protected
-Motor power: 2.5 kW
-Speed: 1450 rpm
-Volume flow: 5000 m³/h
-Pressure: 800 Pa
-Connection input: Ø 500 mm
Sfom2uamx
-Connection output: Ø 450 mm
-Dimensions: 1065/850/H1390 mm
-Weight: 186 kg
5
Radial fan, chip extractor, fan, suction, chip fan
-Motor power: 18.5 kW
-Speed: - rpm
-Volume flow: - m³/h
-Connection input: Ø 310 mm
-Connection output: Ø 400 x 300 mm
Uuxkhabb
-Dimensions: 1600/1100/H1000 mm
-Weight: 230 kg
5
Centrifugal fan, dust extractor fan, fan, extractor, dust fan
-Motor power: 30 kW
-Speed: 1617 rpm
-Total pressing: - Pa
-Volume flow: 23000 m³/h
-Connection input: Ø 700 mm
Uu0jsyjl
-Connection output: Ø 1000 x 550 mm
-Price: per piece
-Number: 2x available
-Dimensions: 1400/1600/H1900 mm
-Weight: 970 kg
5
Centrifugal fan, dust extractor fan, fan, extractor, dust fan
S0xkhtenq
-Motor power: 15 kW
-Speed: 1460 rpm
-Total pressing: - Pa
-Volume flow: - m³/h
-Connection input: Ø 350 mm
-Connection output: Ø 350 mm
-Dimensions: 1200/1500/H1800 mm
-Weight: 560 kg
5
High-pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan
-Motor power: 11 kW
-Density: 1.2 kg/m³
-Volume output: 84 m³/min
-Pressure increase: 3800 Pa
-Connection input: Ø 275 mm
-Connection output: Ø 270 x 130 mm
-Dimensions: 1000/800/H700 mm
S0xei2t33
-Weight: 252 kg
5
Centrifugal fan, dust extractor fan, fan, extraction fan, dust fan, painting extractor fan
-Motor power: 18 kW
Uu7i8qrv
-Speed: 2940 rpm
-Connection input: Ø 370 mm
-Connection output: Ø 370 mm
-Dimensions: 1065/850/H1390 mm
-Weight: 348 kg
-Volume flow and compression unfortunately not visible
5
Radial fan, chip extractor, fan, suction, chip fan
-Motor power: 15 kW
-Speed: 1450 rpm
Uurvaveo
-Volume flow: 7000 m³/h
-Total pressure: 2800 Pa
-Connection input: Ø 400 mm
-Connection output: Ø 400 x 350 mm
-Dimensions: 1200/1000/H1120 mm
-Weight: 450 kg
