Used Cyclone for sale (233)

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 210610, The PIONIER POWERvac 55 H is available for rent The POWERvac is an industrial vacuum cleaner suitable for all types of dust, shavings, oil, and water. This H-class version is designed for hazardous fine dusts regardless of MAK value, including carcinogenic and pathogenic dusts, with clean air recirculated back into the work area. Guedpfx Akjzy H R Ts Ujg Suction takes place in three stages: cyclone separation of liquids, coarse dust and shavings; fine dust separation via the PTFE-coated main/pocket filter; and a final safety filter stage for remaining fine dust. The main filter uses pneumatic POWER shock cleaning during operation (no extra compressed air required), and the mechanical centrifugal separator is maintenance-free. - Motor power: 5.5 kW - Airflow: 520 m³/h - Main filter area: 22,600 cm² - Total max filter area (with safety filter): up to 47,600 cm² - Collection container capacity: 100 litres - Suitable for continuous operation

Condition: used, maximum load weight: 24,830 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 01/2007, loading space volume: 51 m³, Equipment: ABS, approx. 51,000 liters Heitling silo trailer for animal feed / 7 chambers / forced steering / aluminum rims ----* Manufacturer: Heitling * First registered: 01/2007 * Total weight: 32,000 kg * Empty weight according to vehicle registration document: 7,170 kg * Payload: 24,830 kg * Volume: 51m³ in 7 chambers (6.3m³/6.3m³/8.6m³/5.8m³/(5.8m³/8.6m³/9.6m³) * Axles: 2 x SAF / 2nd axle forced steering * Tires: 425/65 R 22.5 aluminum rims * Suspension: air suspension with lifting and lowering * EBS * Pressure tank 2 bar * 7 chambers Gjdpfx Aoq I H N Hek Usug * 7 Sliding lid * 7 udders * 6 floor emptying flaps NW200 with external control on the right * Discharge line NW80 to the rear * Solimar loosening * Access with walkway at the rear left * Central lubrication * Control box at the rear * Hose box left and right * LED work lights * LED reversing lights * Rotating beacon at the rear * Tool box on the left * Cyclone * Full load supports * Single fender German vehicle!! German papers!!

Condition: good (used), Year of construction: 2002, operating hours: 123 h, functionality: unexamined, heating capacity: 350 kW (475.87 HP), Mawera Type FU350RIA, fully automatic wood-fired boiler, bottom-feed firing, output: 350 kW. Hot water system, maximum flow temperature 95°C. Year of manufacture: 2002. Parts: boiler body: combustion chamber and heat exchanger, automatic feed screw, multi-cyclone, flue gas fan with piping to the chimney, operating instructions, Logic control system. Already disassembled. Viewing: possible by appointment in Budapest. Gjdpfx Aswa Ax Ask Usug

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 2,528 h, Compressor Kaeser M 56, year of construction 2003, 2528 operating hours, cyclone separator, with additional cooler for air, volume flow 5.6 m³, 4 cylinder Deutz, Ser.No.TP1229014603 Gusdpsun Rldefx Ak Ueg

Condition: ready for operation (used), * Brand: Sotres * Model: dewatering screen with cyclone * Dim. screen surface: 4300 x 1200 mm * with: two pieces vibration motor of each 4 kW Gujdpsywm S Iofx Ak Ujg * Dim. cyclone: length 3800 mm , Diameter 1000 mm. * incl.: Warman pump, type 10/8 with 75 kW e-motor. * Incl.: steel construction.

Condition: excellent (used), Year of construction: 2022, CNC turning center Doosan Puma 700 M II Control system: Siemens Sinumeric 828 Year of manufacture: 2022 Internal machine number: 39 Turning length: 1,600 mm Turning diameter: 900 mm X-axis travel: 470 mm Z-axis travel: 1,650 mm Spindle speed: 3 – 1,500 rpm Tool turret: 12 positions (all powered) Tool holder: BMT 85P Equipment: Self-centering steady rest Chip conveyor Touch probe 3-jaw chuck Programmable tailstock Extraction system Guedpoyk Tdisfx Ak Ueg Coolant pump 20 bar with cyclone filter Oil mist extraction

Condition: used, functionality: fully functional, machine/vehicle number: W09507250AOK51648, first registration: 06/2010, fuel type: diesel, color: orange, driver cabin: day cab, number of seats: 2, Year of construction: 2010, operating hours: 4,890 h, Equipment: car registration, Vehicle • Model: BOKI HY 1251 Municipal Vehicle • Manufacturer’s No.: W09507250AOK51648 • Engine: IVECO Type F1C • Without tipper body Chassis & Drive • Extended wheelbase from 2,000 mm to 2,300 mm • All-wheel drive • Increased top speed to 50 km/h (instead of 40 km/h) • Performance Package III • Hydraulic Package II • Tires: 225/75 R16 • Increased permissible total weight to 5,000 kg Cab • Air-suspended Grammer comfort seat for the driver • Protective cover for driver and passenger seat • Sun visor for passenger • Interior mirror • Ventilation flap (550 × 260 mm) • Cyclone separator Guedpfozf Eawox Ak Ueg Other Equipment • Towing hook for maneuvering at walking speed • BOKI swivel container system, Type 130T (1,300 mm wide) • Hydraulic swiveling • Two different chain lengths for various containers Included NEW demountable tipper body • Capacity approx. 1.3 m³ • Open, symmetrical design for Multicar system • Completely welded • Floor: 4 mm • Side walls: 3 mm • Height: 770 mm Optionally available: Transport pallet ASK MC PALETTE 1800 • Dimensions: 1,800 × 1,100 mm • Manufactured according to DIN 30735 • With DGUV inspection sticker • Completely welded • Floor 4 mm with reinforcements • Primed and 2-coat painted in desired RAL color • Price: €1,950 plus VAT Subject to changes, typographical errors, errors and prior sale. All information is provided without warranty. The sale is made excluding any guarantee or warranty.

Condition: excellent (used), functionality: fully functional, power: 242 kW (329.03 HP), gearing type: automatic, fuel type: diesel, color: yellow, operation weight: 24,200 kg, tire condition: 80 %, shovel volume: 4.2 m³, Year of construction: 2023, operating hours: 2,783 h, Equipment: UVV, additional headlights, air conditioning, all wheel drive, cabin, low noise, Hyundai HL970A Year of manufacture: 2023 Operating hours: approx. 2783 Cyclone air pre-filter Air compressor for cabin Standard brake accumulator Gjdpfx Aey U I Edok Uoug Safety boom system Remote-controlled door 4 LED cabin lights Voltage converter 24V -> 12V LED rotating beacon LED working lights Combination LED light Simple brake pedal Central lubrication system Bekamax Standard lifting mechanism With emergency steering Vibration damping 5-speed transmission (torque) Quick coupler ISO SW (Volvo attachment) Radial tires Triangle TB5 Transmission underrun protection Control block (MCV) with 3 sections Air-suspended, heated seat Hydraulic oil - VG46 Accelerator pedal with ECO switch Without Bmair filter system Standard paint finish Rear window roller blind Wheel chock Axle cooling – front & rear Hydraulic differential Rear axle without differential lock Universal bucket 4.2 m³, bottom-mounted cutting edge

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost Guodpsy A Ewtsfx Ak Ueg — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. If interested, please contact us – we look forward to helping you find the right solution.

Condition: used, Complete pellet production line with a maximum capacity of up to 5 tons per hour (limited by dryer capacity). Pellet Presses (3 units): CPM 7122 CPM 7922-2 CPM 7930-4 (only ~200 working hours) Hammer Mills (3 units): Maier hammer mill for wet material Maier hammer mill for dry material Kamas hammer mill (for burner material production) Cooling System: CPM pellet cooler Additional Information: Electrical and control systems are fully integrated into container units Production line has been in operation for approximately 2 years Belt conveyor, reception hopper 4 kW Dryer: distributor reception hopper 2,2 kW Conveyor belt, reception hopper 2,2 kW Worm conveyor for drum dryer 2,2 kW Drum dryer 7,5 kW Main cyclone 90 kW Sluice head cyclone 7,5 kW Fan cyclone 18,5 kW 1 Sluice cyclone 1 2,2 kW Sluice cyclone 2 0,55 kW Sluice cyclone 3 0,55 kW Worm conveyor for cyclones 1-3 3 kW Hammer mill – Maier 160 kW Hammar mill for dust burner – Kamas 110 kW Hammar mill for woodchips – Maier 132 kW Worm screw for elevator 4 kW Elevator for buffer pocket 7,5 kW Buffer pocket high/low 8/4,5 kW Scraper conveyor for the presses 2,2 kW Worm screw for dust mill 2,2 kW Press 1 CPM: Model: 7122 Main engine 160 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Grease lubrication 0,18 kW Press 2 CPM: Model: 7922-2 Main engine 250 kW 200 kW Cascade mixer 7,5 kW Feeding screw, frequency converted 2,2 kW Oil lubrication 1,5 kW Feeding screw 4 kW Press 3 CPM: Model: 7930-4 Gujdpjyvz Afefx Ak Usg Work only 200 hours Main engine 250 kW Cascade mixer 7,5 kW Feeding screw 2,2 kW Oil lubrication 1,5 kW Oil cooler 2,2 kW Grease lubrication 0,18 kW Conveyor for warm pellets 2,2 kW Belt conveyor to the refrigerator 2,2 kW Pellet refrigerator, outflow 1,5 kW Fan for the pellet refrigerator 11 kW Fan for the suction 5,5 kW Elevator 2,2 kW Belt conveyor 1,5 kW Belt conveyor 4 kW Combustion air fan 45 kW Conveyor fan 22 kW Conveyor fan 11 kW Silo filter 0,04 kW Filter fan 4 kW Screw for dust silo 2,2 kW Driving motor for dust silo 1,1 kW Oil pump 1,5 kW Dosing screw 0,75 kW Sluice feeder 0,37 kW

Condition: excellent (used), Dust extractor unit to run with preduster. Almost as new. Gusdpfx Akjumm Npo Usg

Year of construction: 2009, condition: ready for operation (used), Max. solids throughput: 5m³/h, suspension flow: 20-30m³/h, drive power: 45-75kW, speed range: 500-1800/min, delivery pressure: less than 3.5bar, batch volume: 300-15,000l. Equipment: solids feed via rotary valve, downstream solids disperser, acceleration chamber, cyclone with laminar flow section, conical compaction zone with housing cooling, solids feed tunnel with safety slide valve, mains-powered pump, batch tank with agitator, rotor as liquid ring pump, suspension outlet at the largest diameter. Suitable for resin dispersions, architectural paints, industrial coatings, filler pastes, pigment dispersions, automotive coatings, UV coatings, fire protection coatings, marine paints, gelcoats, gravure inks, newspaper rotary printing inks, heatset inks, coldset inks, sheetfed offset inks, flexographic inks, screen printing inks, inkjet inks, extenders, food and beverages, pharmaceutical and cosmetic products, pastes made from pyrogenic silica, aluminium oxide pastes, plastisols, foam-free aqueous suspensions, casting resins. The machine has been used very little, with control cabinet, powder container, pressure load cells and operating manual. An on-site inspection is possible. Gjdpfx Akezh Nhqj Ujug

Condition: used, mileage: 829,404 km, power: 340 kW (462.27 HP), first registration: 06/2016, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 11/2026, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, compressor, electronic stability program (ESP), navigation system, parking heater, soot filter, FT XF 460 SC ICE WHITE Automatic temperature control and air conditioning Cab interior trim color: Earth White work lights Front mirror Basic immobilizer Upper bunk for luggage storage Tail lights with bulbs Stabilink rear axle suspension Halogen headlights Rear: 13.00 t, air suspension, SR1344 Traction control (ASR) Drive rear axle with disc brakes Front underrun protection Catwalk step on the left AdBlue tank 90 liters on left fender Passenger seat: Basic Fuel tank left side Front axle 1, 8000 kg, load index 156 Rear axle 1, 13000 kg, load index 149 Door trim made of fabric Soft-touch steering wheel, black Electronic Stability Control (VSC) Fog lights Electric windows Pollen filter Brake system EBS-3 Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS interface Driver Performance Assistant Storage compartment for trailer connections Central locking 24V sockets 2x7 pins + EBS, cabling 2x7 pins w/o EBS External sun visor, smoke gray, translucent Truck navigation radio, 6 speakers Air-suspended cab Rear axle 1: 315/80R22.5 Reversing warning system Digital tachograph, VDO Engine MX-13, 340 kW/462 HP. Cab badge: 460 Aluminum fuel tank 620 l, height 620 mm ZF intarder Alcoa Dura-Bright aluminum wheels 32 mm Auxiliary power supply 12V/20A, 24V/2x15A+2x40A Batteries in rear overhang, no spare wheel holder 12-speed AS Tronic 12AS2330 DD, 15.86-1.00 Guedpfsyz Hd Esx Ak Usg Front axle 1: 385/65R22.5 Eberspächer auxiliary air heater with timer Emission standard Euro 6 Top air intake with cyclone filter Space Cab - cab AS Tronic transmission, 12 speeds Wheelbase 3.80 m / rear overhang 0.99 m Front: 8.00 t, parabolic, standard, 165N, one ride height M8870 Ice white Coolbox or refrigerator Extra-long catwalk with step Xtra Comfort mattress lower bunk PTO NAS/10bc-40/17/27 DAF Night Lock Truck phone Cab interior design, Argenta Driver's seat: Super Air Analog bodybuilder signals and warnings Rear axle ratio 2.79 Axle load monitoring Aluminum air tanks Adaptive cruise control with FCW and AEBS Signal horns, 2 sets Armrest driver's seat Lower bunk with 65-liter drawer Antennas: AM/FM, 2x GSM, GPS. Extra: CB Lane departure warning system ADR certificate CB radio speaker 2 beacon lights on lamp bar 2 flashing beacon lights 2 work lights behind driver cab, on top Schoch chrome lamp bracket 4 Hella blue-light H1s for Schoch lamp bracket Bycool compressor rooftop parking cooler 24V NATO socket on chassis / batteries in rear Compressed air gun in cab CB radio 40 channel Cold power socket for coffee machine Tipper hydraulics incl. separate tank 200l (factory only) Compressor

Condition: used, Year of construction: 2017, Old Lodige KM 1200 D continuous mixer with ploughshares (year 1977) transformed into a mixer-dryer (year 2017) by the previous user. Modification made : New enclosure / mixing chamber in stainless steel 316. Change of motor transmission: belt -> geared motor Main material: 316 stainless steel Year: 2017 Type of drying: hot air blowing Without electrical cabinet Gsdex R An Espfx Ak Ujug With piping 1 – Ploughshare mixer 1200 L Motor manufacturer: SEW Power : 18,5 KW Material: 316 stainless steel + 2 manual butterfly valves + 2 manual Orbinox knife gate valves Porthole interior view Safety box suppression (brand : Vigilex) No manufacturer’s plate 2 – Fan n°1 Manufacturer: Kiekens Model : 8 KTEN 355 Year: 2017 Volume: 1204 m3 / H Power : 15 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 3 - Fan n°2 Manufacturer: Kiekens Model : 8 KTEN 280 Year: 2017 Volume: 1204 m3 / H Power : 4 KW Temperature : 80°C Atex : yes Ex II 3D/G td nA 4 – Heat exchanger Manufacturer : Bronswerk heat transfer B.V Year: 1996 Exchange surface: 67 m2 x 2 Max pressure : 20 bar Max. temperature: 215°C Fluid : water or steam Volume : 17 L x 2 Temperature sensor connection 5 – Dust collection cyclone Year: 2017 With DMN Westinghouse rotary valve (type : butterfly) On frame 6 – Platform with stairs and mixer support Manufacturer: IJSSEL technology

Condition: good (used), Year of construction: 2018, functionality: fully functional, Gema Gsdpfx Aoy Al T Iek Uoug Year of manufacture: 2018 Equipped with 6 automatic guns, 2 manual spray guns Max. pass-through dimensions: L x H x W, 3m x 2m x 1.1m Magic Compact BA04 Color change system Magic Compact BA4 OptiCenter OC2 Powder coating device OptiMatic AS06-8P Lifting equipment ZA7-23 Mono-cyclone 24,000 [Nm3/h] from Therma Afterfilter exhaust air volume 24,000 [Nm3/h] STS fire suppression system Caldan Overhead conveyor system Power & Free by Caldan Year of manufacture: 2018 Approx. 120 linear meters, with 12 product carrier trolleys, each 3 meters Custom built by Protaurus Gas-heated curing oven by Protaurus Year of manufacture: 2018 Weishaupt burner type WG40N/1-A, 500 kW output Complete with control system and accessories Without insulation material, oven casing needs to be overhauled Complete system by Gema and Caldan professionally packed Professional reassembly by Gema and Caldan prepared Layout attached Transportation costs, reassembly, and commissioning to be borne by the buyer

Condition: used, incl. cyclone, frame, blower (Image 1 without Heger dust collection silo) 1/7 Frame 1,520 x 1,470 x 2,450 mm Guodpsy Atr Esfx Ak Ujg 2/7 Pipe package 3/7 Frame 1,500 x 1,500 x 2,800 mm 4/7 Frame 2,600 x 1,520 x 2,400 mm 5/7 Cyclone 6/7 Pipe package 7/7 Blower Additional images available

Condition: used, Year of construction: 2006, Wood chip heating system Fröling Lambdamat FUR 1000, output 1000 kW, year of manufacture 2006, moving grate firing system (for poor fuel quality), hot water system with a maximum protection temperature of 110°C, including pneumatic cleaning system, including hydraulic feed system with backfire protection and hydraulic unit, including multi-cyclone separator with flue gas fan, including flue gas pipes, including control system, including fuel transport system, including sliding floor, system is functional, system must be dismantled by the buyer. Godpfxevyrwpe Ak Ueug

Year of construction: 1986, condition: ready for operation (used), screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 Gedpfxjzht H Rj Ak Uoug • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: used, mileage: 289,276 km, power: 390 kW (530.25 HP), first registration: 09/2022, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 10/2026, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, FT XF 530 SC PXP Desert Yellow Headlight beam pattern for right-hand traffic Electrical trailer connection 24V/15-pole, cable: 15-pole + EBS Front mirror Left-hand drive OBD, Euro VI Step E Auxiliary heater with waste heat recovery and timer Scale speedometer display in km/h Automated gearbox with manual override – full version Basic immobilizer Kingpin diameter 2 inches Rear lights with incandescent bulbs Stabilink rear axle suspension Halogen headlights Max. permissible gross vehicle weight of tractor 50,000 kg, class 3 Traction control system (TCS) EAS unit on the right-hand side Driven rear axle with disc brakes Rear fender Splash guard Front underrun protection Convex main mirror Pneumatic connection for trailer, swivel coupling Walkway with step, standard Exhaust pipe, horizontal, low Body connector on the front of the cab Cold foam mattress for lower bunk Walkway step on the left Work light, LED Automated gearbox, TraXon, 12 gears Interior trim color: Dark Sand DAF Connect Co-driver seat: Basic Fuel tank, left Adaptive Cruise Control with FCW and AEBS-3 Front axle 1, 8,000 kg, load capacity index 156 Type approval for complete vehicles (WVTA) Rear axle 1, 13,000 kg, load capacity index 149 Standard maintenance interval Luxury speaker system with 6 speakers Cab, interior trim Delta black Door panel: loosely woven fabric Pleasant-to-grip steering wheel, color black Electronic Stability Control (VSC) Armrest, driver's seat Preparation for toll system Fog lights Lane change warning system Power windows Pollen filter Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS connector Driver Performance Assistant Storage compartment for trailer connections H3296 Desert Yellow Central locking Sealing, lower part, cab structure and fender on driver's side Antennas: DAB-ready, radio, 2x mobile phone, GNSS extra: CB Sun visor, external, green, translucent Cab air-suspended Driven rear axle(s): 315/80 R22.5 MX-13 engine, 390 kW/530 hp, cab emblem: 530 Rear warning system 12-speed TraXon gearbox 12TX2620 DD, 16.69-1.00 Aluminum fuel tank 430 l, height 620 mm ZF Intarder Godpfozahcxex Ak Ueug Aluminum wheels, Alcoa Dura-Bright Auxiliary power supply: Standard + 2x 40 A Digital tachograph, VDO 1C Vertical battery box, left, no spare wheel holder Auxiliary engine, rear, 13 hp, continuous, pump drive KA saddle plate dimension 470 mm Preparation for compressed air system Front axle(s): 385/65R22.5 Emission standard Euro 6 Air intake, top with cyclone filter Space Cab - cab Rear axle ratio 2.69 First gearbox auxiliary drive NH/4c-R-32/25 Curtains with partition curtain Headlight design and bumper: cab color Cool box or refrigerator Dust protection shield Rear: 13.00 t, air suspension, SR1347 Speed limiter setting 90 km/h Automatic cab climate control ECO mode AdBlue® tank 75 l, left chassis side Wheelbase 3.60 m / rear overhang 0.75 m Truck phone Chassis preparation with hydraulic front axle from PXP Front: 8.00 t, parabolic, 187N ECAS remote control with extended functions Preparation for navigation system Driver's seat: Luxury Air Analog body signals and warnings Axle load monitoring Battery energy monitoring Aluminum compressed air tank Safety net on lower bunk CAN J1939 functions in the body connector Lower bunk with drawer, 65 liters PAUL PXP (GER) for CF or XF Loading camera, FHS roof Wind deflectors, side windows 2 rotating beacons on lamp bar from Truckline 24V socket on chassis (NATO socket)

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Cyclone Diameter: 1295 mm (51 in) Guedpfszunvaex Ak Usg Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel - Vibrator - Rotary valve discharge

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Technological line of the Polish brand BRODPOL for sawing medium-sized logs with a length from 1,800 to 3,000 mm and a diameter from 120 to 480 mm Year of production: 2023 Technical condition: very good The line consists of the following machines and devices: 1. Log magazine/feed conveyor with inclined discharge, type PKS 2200/2912 Year of production: 2023 2. Driven prism-shaped accelerating table, length 5,000 mm, equipped with a pneumatic log discharge mechanism Year of production: 2023 3. Driven prism-shaped accelerating table, length 4,000 mm, equipped with a log turning mechanism Year of production: 2023 4. Chain-fed circular saw unit TT5/700/480 G Year of production: 2023 Gujdpjziqnuefx Ak Uog 5. Receiving roller table with separating plates, “bag” type, length 7,000 mm Year of production: 2023 6. Centring table SC 8000, equipped with a mechanism for stopping one cant Year of production: 2023 7. Double-spindle multi-rip saw WP 220 Year of production: 2023 8. Central belt conveyor, length 38,000 mm, belt width 500 m Year of production: 2023 Additionally, the line includes a waste receiving system with an MDR metal detector and a MADREW RK 650x200 chipper from 2021, as well as a dust extraction installation with a JKF cyclone dedicated to this line. Assembly and start-up of the line are available for an additional fee

Condition: good (used), Year of construction: 2017, functionality: fully functional, overall weight: 8,500 kg, fuel: diesel, feed length X-axis: 6,000 mm, cutting length (max.): 1,100 mm, Equipment: front-end loader, trailer coupling, Pinosa CPE 1200 Semi Automatic Firewood Processing Machine Machine Type: Firewood Processing Machine Year: 2017 Condition: Very Good, has had very little use. Powered By: 3 Phase, Diesel Generator or PTO. Includes FG Wilson P110 110kVA Diesel Generator Feeding Deck Extraction Conveyor with Sieve and Cyclone for Sawdust Machine Description This is a mobile, self-contained wood cutting and splitting machine. It allows you to saw and split sizes of wood from 50 to 480mm diameter, while being movable. The machine can thus be transported on a truck, then installed on demand autonomously using 4 jacks. It is therefore suitable for both the service provision market and for on-site production. Finally, note that it only requires a single operator to produce up to 16T of firewood per hour . Technical Specifications Blade Diameter: 1200mm Max Length of Tree Trunk: 6000mm Min Length of Tree Truck: 800mm Max Diameter of Tree Trunk: 480mm Min Diameter of Tree Trunk: 50mm Max Cut Off Length: 1100mm Min Cut Off Length: 200mm Splitting Possibilities: 2-4-6-8-10-12-14-16 Splitting Cylinder Power: 35T Max Hourly Throughput: 16T/H Power Connection Options: Electric Motor/Electric Generator/PTO Motor Power: 37kW Machine Weight: 8500kg Gedovbdyxopfx Ak Ueug Notes: *Specifications are given in good faith but not guaranteed*

Condition: used, mileage: 507,000 km, power: 350 kW (475.87 HP), first registration: 07/2016, fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, Arocs 3348/6x4 / Roll-off tipper GERGEN Godjt T H D Topfx Ak Uoug Chassis cover, front axle load 8.0 t, trailer brake 2-line, audio navigation system Bluetooth comfort, step with handrail on the roof, exhaust pipe downwards on the right, right-hand exterior mirror with maneuvering position, battery 220 Ah, batteries arranged one above the other, air horn, electrical pre-wiring in the cab 24V / 100 A, cab: steel-sprung, comfort, suspension: rear springs 2x15.0 t, suspension: front springs 8.0 t, 3 leaves, parking brake additionally on the front axle, vehicle without rear underrun protection, hazardous goods version ADR Type FL, transmission 12-speed - Type: G 330-12, info display 12.7 cm with video function, interior filter for construction site vehicles, cooler box / refrigerator, air intake behind the cab, air filter: cyclone air filter, engine brake reinforced, auxiliary drive MB 124-10c, configurable special module, retarder, rotating beacon left/right, reversing warning device acoustic (warning signal outside), disc brakes front axle, drum brakes rear axle, rear crossmember reinforced, protective plate under the main tank, seats in the cab: driver's seat, sprung comfort seat, sun visor outside, sun protection roller side window, driver's door, voltage converter 24V / 12V 10 A, stabilizer on 2nd rear axle, reinforced, steel rims 11.75x22.5 (on the front axle), steel rims 9.00x22.5, stowage flap outside left, 12V socket in the passenger footwell, 24V socket in the passenger footwell additionally, stone guard, CB radio preparation, preparation for reversing camera Emission standard EURO 6, ABS switchable, axle configuration: 6x4, trailer socket 24V / 15-pin, Arocs, exterior mirrors electrically adjustable and heated, differential lock rear axle, compressed air connection in the cab, compressed air tank steel, cab: width 2.30 m, cab: cab entry movable, cab: tilting mechanism hydraulic, cab: M ClassicSpace, cab floor with engine tunnel 170 mm, suspension: leaf / leaf, power windows, windshield tinted, generator 100 A, urea tank (AdBlue): 60 liters, lifting roof manual (steel), rear axle bevel gear 300, interior filter: pollen filter, body / superstructure: tipper, fuel tank: 290 liters aluminum, left, steering pump unregulated, air compressor 2-cylinder, air dryer heated, engine 12.8 liters - 350 kW R6 Diesel (OM 471), engine compartment encapsulation, wheelbase 3300 mm, curb mirrors, waste heat recovery, rear window, disc brakes with full protection, seat cover / upholstery: fabric, seats in the cab: passenger functional seat, stabilizer front axle, socket cab 24V, tachograph / EC control unit, preparation toll collection, front axle straight, water pump regulated, permissible total weight 33.00 t, oil cooler transmission. Unladen weight: 14795 KG.

Condition: new, Year of construction: 2026, Cyclone Dust Separator with Waste Container and Vacuum Hose Included The cyclone dust separator with waste container and vacuum hose is a practical solution designed for efficient dust extraction in woodworking workshops and industrial environments. The separator allows two machines to be connected simultaneously, improving the efficiency and convenience of the dust collection system. The dust separation process is based on centrifugal force. Extracted dust particles are separated from the airflow and collected in containers located beneath the cyclone. The separator efficiency reaches 90–95%, significantly reducing the amount of dust reaching the filtration system. Device description Metal separator housing, Metal waste collection container, Mobile base, Ergonomic handle, Viewing window for checking the container fill level, Quick-release clamps for easy bag installation. The cyclone must be connected to a fan or dust extraction system. Operating principle In the cyclone separator, contaminated air enters the cylindrical chamber and begins to rotate. Due to centrifugal force, heavier particles suspended in the airflow are pushed toward the outer walls of the chamber. As they lose speed and kinetic energy through contact with the cyclone walls, they fall downward under the influence of gravity and collect in the container. The lightest sawdust particles are then captured by the filter cartridge and directed into the collection bag, while cleaned air exits through the sides of the filter. Technical specifications Parameter Specification Tank capacity 118 L Guedpfx Aevu Uugjk Ujg Bag dimensions Ø500 x 850 mm Inlet diameter 125 mm Inlet adapter diameters 1 x Ø125 / 2 x Ø100 mm Outlet diameter 125 mm Outlet adapter diameter Ø125 mm / Ø100 mm Weight (net/gross) 24 / 26.5 kg Overall dimensions 785 x 508 x 1545 mm Note: The fan, dust extractor, and Ø100 mm hose are not included in the set.

Condition: used, mileage: 310,178 km, power: 355 kW (482.67 HP), first registration: 07/2022, fuel type: diesel, axle configuration: 2 axles, next inspection (TÜV): 07/2026, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, electronic stability program (ESP), parking heater, soot filter, FT XF 530 SC PXP Desert Yellow Headlight beam pattern for right-hand traffic Electrical connection for trailer, 24V/15-pole. Cable: 15-pole + EBS Front mirror Left-hand drive OBD, Euro VI Stage E Auxiliary heater with waste heat recovery and timer Speedometer display in km/h Automatic transmission with manual override – full version Basic immobilizer Rear lights with incandescent bulbs Stabilink rear axle suspension Halogen headlights Emission class Euro 6 Gusdpfezahc Eex Ak Uog Max. total vehicle weight (GVW) drive axle 50000 kg, Class 3 Traction control system (TCS) Space Cab – cab EAS unit on the right side Driven rear axle with disc brakes Rear fender Splash guard Front underrun protection Convex main mirror Pneumatic connection for trailer, fifth wheel coupling Running board with step, standard Exhaust pipe horizontal, low Body plug at the front of the cab Cold foam mattress for lower bunk Running board step on the left Work lights, LED Automated transmission, TraXon, 12 gears Color of interior trim: Dark Sand Standard mounting plate DAF Connect Co-driver's seat: Basic Fuel tank left Adaptive cruise control with FCW and AEBS-3 Front axle 1, 8,000 kg, load capacity index 156 Type approval for complete vehicles (WVTA) Rear axle 1, 13,000 kg, load capacity index 149 Standard maintenance interval Luxury speaker system with 6 speakers Cab, interior trim Delta black Door trim: loosely woven fabric Smooth steering wheel, color black Electronic stability control (VSC) Driver's seat armrest Preparation for toll system Fog lights Lane change warning system Window lifts: electric Pollen filter Mechanical differential lock Brake performance monitoring LED daytime running lights Universal FMS connection Driver Performance Assistant Storage compartment for trailer connections H3296 Desert Yellow Central locking Sealing, lower part, F-cab structure and fender in driver's cab Antennas: DAB-prepared, 2x mobile, GNSS extra: CB External sun visor, green, translucent Cab air-suspended Driven rear axle(s): 315/80 R22.5 MX-13 engine, 390 kW/530 hp, cab emblem: 530 Rear view warning system 12-speed TraXon transmission 12TX2620 DD, 16.69-1.00 Aluminum fuel tank 430 l, height 620 mm ZF Intarder Air intake, black handle, in cab Aluminum wheels Alcoa Dura-Bright Auxiliary power supply: standard + 2x 40 A Digital tachograph, VDO 1C Vertical battery box left, no spare wheel holder Auxiliary engine rear, 13 hours, continuous, pump drive KA saddle specification 470 mm Preparation for compressed air system Front axle(s): 385/65R22.5 Air intake on top with cyclone filter Rear axle ratio 2.69 First transmission auxiliary drive NH/4c-R-32/25 Curtains with partition curtain Headlight and bumper: cab color Cool box or refrigerator Dust protection shield Rear: 13.00 t, air suspension, SR1347 Speed limiter: 90 km/h Automatic cab climate control ECO performance AdBlue® tank 75 l, left chassis side Wheelbase 3.60 m / rear overhang 0.75 m Truck phone Chassis preparation with hydraulic front axle from PXP Front: 8.00 t, parabolic, 187N ECAS remote control with extended functions Navigation preparation Driver's seat: Luxury Air Analog body signals and warnings Axle load monitoring Battery energy monitoring Preparation for aftermarket switches Compressed air tank made of aluminum Protective net on lower bunk CAN J1939 functions in the body plug Lower bunk with drawer, 65 liters PAUL PXP (GER) for CF or XF Loading camera FHS roof Wind deflectors side windows 2 all-round lights