Used Crankshaft Turning Lathe for sale (9,183)

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Chuck diameter up to 260 mm Workpiece spindle bearing diameter Blsdjwgm Hkspfx Acyep in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Condition: like new (used), For sale is a used MAGMA Lathe FU 200 woodturning lathe with a center height of 200 mm. The machine is in very good condition and has been reconditioned and inspected by our qualified personnel. (Fully operational) - Center height: 200 mm - Distance between centers: approx. 1000 mm - Spindle thread: M33 x 3.5 with MK2 taper - Motor: 1.5 kW (230V) with high-quality frequency inverter The lathe is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Blsdpexpg R Ejfx Acyop Related terms: turning machine, lathe, woodturning lathe, wood turning, Twister, FU 200, turning tools, woodturning, turning, machine Reference: E2DT6

Condition: used, Make: Schiess Control: Conventional Location: Germany Major overhauls: 2009 new electric with new AC main motor, 2022 overhaul of the gearbox. Condition: under power, in good condition Chuck Ø: 9500 mm Swing Ø: 10500 mm Max. Workpiece Weight: 150 T Max. Working Height: 4500 mm Ram Vertical Travel: 2250 mm Chuck Speed: up to 7.35 rpm Bodpfx Acsxpd Emoyelp Machine Weight: aprox. 400 T Left ram is currently dismantled but will be supplied together with the machine.

Condition: used, Year of construction: 2011, bar material dia. 16 mm spindle passage 20 mm turning length 200 mm turning speeds 15000 U/min c-axis 0,001 ° gripping station 16 mm turning length 80 mm turning speeds 15000 U/min positive location each 0,001 ° number of tools 23 total number of milling stations max. 12 control Mitsubishi MELDAS Number of axles 7 St. Number of working hours 25150 h total power requirement 3,7 kW weight of the machine ca. 2,3 t Bodpfxoxnqv Ne Acyelp dimensions of the machine ca. 2 x 1,1 x 1,7m plus FMB swiss type machine Citizen K1&E-VIIP, built 2011, with FMB Minimag 20 Excellent conditions! Loading in week 48/2025

Condition: used, Year of construction: 1998, max. working diameter 20 mm max. working lenght 320 mm bore diameter 10 mm passage of spindle 24 mm Spindle speed 200 - 8.100 min -1 control MITSUBISHI Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. Bljdpfx Asvnwf Iocysp A machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm tip holder insert sleeve cone: 72 metric Bedpfxjqwlmqj Acyolp lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: refurbished (used), Year of construction: 1980, turning height: 4,800 mm, Completely retrofitted Single Column Vertical Turning Lathe Blansko SKSJ 1A, equipped with a single vertical head suitable for both turning and milling operations. Technical specifications: - Face plate diameter: 6,300 mm - Maximum achievable outer diameter (with column at max. extension): 11,200 mm - Maximum workpiece height: 4,800 mm - Maximum turning diameter (column positioned near face plate): 8,000 mm - Maximum turning diameter (column at maximum extension, for internal turning): 16,000 mm - Infinitely variable face plate speed: 0.5 to 20 rpm - Maximum permissible workpiece weight on face plate: 125 tons The machine underwent a comprehensive retrofit in 2024-2025 and is equipped with the following brand-new components: - New electrical cabinet with CE-compliant components (Siemens, Schrack, etc.) - New Siemens 828 CNC, 100 kW main drive motor, 27 Nm feed motors, and ZF reducers (ratio 1:5) - New ballscrews on 2 axes (vertical head and cross rail) - New Heidenhain absolute scales on 2 axes Bedpfx Acsw Hfm Njyjlp - Hydraulic and lubrication systems fitted with CE-compliant components (Rexroth, Brevini, Atos, etc.) - New DROPSA (Italy) or equivalent central lubrication system - Geometric accuracy according to ISO standards – as per new-machine specifications For further information, please contact us.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, CLASSROOM MACHINE For sale is a Drechselmeister Twister FU 200 wood lathe with a distance between centers of 715 mm. The machine is in very good condition. Technical Specifications - Center height: 200 mm - Swing over bed: 395 mm (700 mm with optional outboard turning attachment) - Distance between centers: approx. 715 mm (optionally extendable) - Spindle thread: M33 x 3.5 with ASR (Euro) safety groove* - Spindle and tailstock taper: MK2 - Speed ranges (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (trapezoidal thread), prepared for ER-25 drilling quill - Motor: 2 HP (connection 230 V) - 2-stage emergency stop switch - Weight, stand version: 166 kg The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Shipping by freight: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT Related terms: wood lathe, lathe, turning machine, woodworking lathe, woodturning, turning tools, woodturning, machine Reference: R-A0117 Blsdpswudkijfx Acyop

Condition: reconditioned (used), functionality: fully functional, Equipment: rotational speed infinitely variable, A used Benzinger precision hand lathe. Universal application with a Röhm 4-jaw chuck. The machine is partially overhauled and fully functional. Equipped with a Röhm 4-jaw chuck Bsdpfxswp Ddxj Acyslp 2 hand lever slides with Multifix universal tool holder Kobold motor 0.55 kW, 1400 rpm with stepless speed control. The following work has been carried out: - New spindle axial bearing - New V-belt - Machine bed hand-scraped - New capillary lubrication - Motor overhauled - All dovetail guides ground and hand-scraped - All guides adjusted free of play - New graduated drums and leadscrews - Cross-slide completely overhauled - Cross-slides with Multifix completely overhauled

Year of construction: 1980, condition: excellent (used), Widht: 1000-1676 mm Axis lenght: 1327-2700 mm Diameter of the wheels: 460-1120 mm Axle diameter: 70-200 Bjdpfxjnbfcre Acyelp XAD 112, more information on request

Condition: used, Year of construction: 2000, max. working diameter 20 mm max. working lenght 320 mm passage of spindle 24 mm Spindle speed 200 - 10.000 min -1 control MITSUBISHI Blodpfx Acovnwfzjysp Turning Automatic Lathe - swiss lathe | CITIZEN - M-20 equipped with bar feeder. The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: M20 | M 20

Condition: good (used), Year of construction: 2004, Table diameter: 1220 mm Max. turning diameter: 1500 mm Table speed range: 4.5 to 100 rpm Feed range: 0.127 mm to 6.35 mm per revolution Maximum height under crossrail: 900/1200 mm Slide travel (X-axis): 1000 mm Bledpfxoxg Nmks Acyep Main drive motor: 41 kW Tool changer: 30 positions Accessories: - 8 clamping jaws - 30 tool holders with full enclosure - Oil mist extraction

Condition: used, Year of construction: 2019, bar material dia. 32/38 mm spindle passage 44 mm turning length 320 mm turning speeds 200-8000 U/min Bedpfjuwv Tgsx Acyslp c-axis 0,001 Grad gripping station 32/38 mm turning length 120 mm turning speeds 200-8000 U/min c-axis 0,001 0 number of tools 13 fix number of milling stations 4+5 driven control Mitsubishi Meldas Number of axles 5+2 St. total power requirement 7,5 kW weight of the machine ca. 2850 kg dimensions of the machine ca. 2,5 x 1,4 x 1,75 + Irco m CNC sliding headstock machine Citizen L32-1M8, built 01/2019 with barloader FMB turbo 3-36 equipped with swar- & coolant tank, fire distiguisher. ON/OFF 23.471h Running hours 21.495h GBL function (standard) LFV function: no

Condition: good (used), Year of construction: 2014, USED MACHINE For sale is a Drechselmeister Stratos FU 230 woodturning lathe with a center distance of 680 mm and a 2 HP motor. The machine is in good condition – it is a used machine. Technical data - Center height: 230 mm Bedpfx Aoxnbvgocyjlp - Max. turning diameter: 455 mm (up to 800 mm with optional outboard turning device!) - Center distance: approx. 680 mm (expandable!) - Spindle thread: M33 x 3.5 (hardened) with ASR (Euro) anti-release groove* - Spindle and tailstock: Morse taper MK2 - Speeds (2 belt ranges): 60 – 1,350 rpm and 180 – 3,750 rpm - Quill travel: 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (230 V connection) - Weight: 178 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: woodturning machine, lathe, turning lathe, woodturning lathe, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz Bedpfortd Uwsx Acyolp - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: like new (used), Year of construction: 2019, operating hours: 1,256 h, functionality: fully functional, machine/vehicle number: HTS.XD.26.A1.0133, Machine Name - Dugard Hanwha Machine Model - XD26H S.N A1.0133 Y.OM 2019 Bjdpfowxl Rlox Acyelp Description - Fanuc i Series control Max Turning diameter 26mm 8000 RPM main and sub spindle Upto 20 tools can be used LNS Alpha 312 Barfeed

Condition: used, Year of construction: 2011, bar capacity 18 mm travel -x axis 120 mm travel -z axis 250 mm control TRAUB SYSTEM TX 8i-s --- upper turret --- - - - turret stations 8 --- lower turret --- - - - Blsdpfx Aoxh S H Aecyjp turret stations 7 Swiss type- and fixed head lath | TRAUB - TNL 18 equipped with bar feeder, chip conveyor, fire protection system, high-pressure pump (50 bar) An extensive tool package is in the Scope of delivery includes. The machine is in a well-maintained condition and can be inspected under power at any time. The machine videos from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNL18 | TNL 18 | TNL-18

Condition: excellent (used), Year of modernization: 1991 Table diameter: 3750 mm Manufacturer: CKD Skoda Max. workpiece diameter: 4200 mm Workpiece height: 2500 mm Vertical stroke: 1400 mm Table diameter: 3750 mm Table load capacity: 40,000 kg Excellent condition Blsdpfswza Svox Acyep Side support Weight approx. 100,000 kg

Condition: good (used), Year of construction: 1990, 2 UNITS available CONTROL FANUC 0 Bsdpfx Asd S U Dgecyslp CNC Lathe Technical details: Turning diameter 165 mm Turning length 200 mm Control Fanuc 18 TB X-axis 2x 195 mm Z-axis 265 (B 780) mm Bar passage 50 mm C-axis 0,001° Turning speeds: 50-5.000 U/min Tool turret with 12 work positions 2 x12 Turning speeds : 180-3600 U/ min Accessories: Chip conveyor

Condition: like new (used), Year of construction: 2025, functionality: fully functional, NOW: Clearance sale of lathes (demonstration models, showroom units, and workshop machines). Bljdpfxowyn Dko Acyep We are selling various lathes with low operating hours that were used during our demo days or in one of our woodturning course rooms. You will receive a full warranty. All lathes come equipped with a drive center, live center, and faceplate (or other basic equipment and operating instructions). Detailed information and technical data for each machine type can be found on our website! Shipping available upon request! Available machines: * Drechselmeister Miditec FU 175 SET € 999 incl. VAT (€ 832.50 excl. VAT) * Drechselmeister MIDI 1 bench lathe € 880 incl. VAT (€ 733.33 excl. VAT) * Drechselmeister MIDI 2 PLUS bench lathe € 1,099 incl. VAT (€ 915.83 excl. VAT) * Drechselmeister TWISTER FU-200 lathe € 2,293 incl. VAT (€ 1,910.83 excl. VAT) * Drechselmeister STRATOS FU-230 lathe € 2,633 incl. VAT (€ 2,194.17 excl. VAT) * Drechselmeister STRATOS FU-230 LV lathe € 2,845 incl. VAT (€ 2,370.83 excl. VAT) * Drechselmeister TWISTER XL lathe € 3,398 incl. VAT (€ 2,831.67 excl. VAT) * Drechselmeister STRATOS XL lathe € 4,248 incl. VAT (€ 3,540 excl. VAT) * Teknatool NOVA NEBULA 230 DVR lathe € 2,590 incl. VAT (€ 2,158.33 excl. VAT) * Teknatool NOVA Galaxy DVR lathe € 1,990 incl. VAT (€ 1,658.33 excl. VAT) * RECORD POWER lathe DML 250 € 280 incl. VAT (€ 233.33 excl. VAT) * RECORD POWER lathe CORONET ENVOY € 1,799 incl. VAT (€ 1,499.17 excl. VAT) * RECORD POWER lathe Coronet Herald SET € 1,079 incl. VAT (€ 899.17 excl. VAT) * HAGER lathe STAR 200 MAX SET € 2,890 incl. VAT (€ 2,408.33 excl. VAT) * HAGER lathe HDG 250L € 3,990 incl. VAT (€ 3,325 excl. VAT) * HAGER lathe HDE300 € 4,680 incl. VAT (€ 3,900 excl. VAT) The machines are located in A-5431 Kuchl and can be inspected during our opening hours at any time. Subject to prior sale! Related terms: lathe, turning machine, bench lathe, woodturning lathe, woodturning, turning tools, wood turning, machine Reference: R-A0117

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, VERTICAL FULLY HYDROSTATIC HEAVY TURNING AND MILLING MACHINING CENTER Brand: Made in EU / YOM: 2012, Start-up: Mid 2013 The machine can be inspected by appointment under power. Condition: Ready for operation, fully functional. TECHNICAL SPECIFICATIONS: Travels: * Faceplate diameter: 6.000 mm * Turning diameter max.: 8.000 mm * Table load: 100 tons * Slide horizontal travel (Z-axis): 4.800 mm * RAM vertical travel (Z-axis): 2.500 mm The RAM is equipped with a head and an integrated milling spindle line, which enables turning, boring, grinding and milling. * Turning height max.: 5.000 mm Travel of the cross beam on the columns (W-axis): 4.000 mm * Main spindle torque motor: 150 kW * Second RAM for turning operations with vertical travel: 2.500 mm Bledpfoxa E Dxox Acyjp EQUIPMENT extensive, including: * CNC Control: Siemens 840 SL (Solution Line) * Hydrostatic system * Tool magazine: 24 positions and 2 head positions * CE marking * Documentation complete Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale -

Condition: used, L + Z Lathe WAFUM Type TUD 40 Machine no. No. 35689 Year of construction 1975 Center width 1500 mm Turning diameter over bed Ø 440 mm Center height above bed 220 mm Center height above support Ø 125 mm Spindle bore Ø 56 mm Spindle speed 18 - 1800 rpm 36 steps Chuck flange short taper DIN 55027 size 6 Inner tailstock taper MK 5 Drive power 4 and 6.7 KW - Spindle speed via 2 motor speeds and 18 gear stages - 3-jaw lathe chuck Ø 315 mm BISON with 2 sets of chuck jaws (lathe and drilling jaws) - MULTIFIX size B quick-change steel holder with 2 interchangeable cassettes - Fixed lynette with plain bearing inside Ø 125 mm Bedpfxew Uf Hwj Acyelp - Moving lynette with plain bearing inside Ø 100 mm - Guide rail for turning slim cone with automatic longitudinal feed - 1 piece rotating center point - Hinged chuck guard Space requirement L x W x H 3100 x 1200 x 1450 mm weight 3000 kg good condition

Condition: used, Year of construction: 2011, bar capacity 18 mm travel -x axis 120 mm travel -z axis 250 mm control TRAUB SYSTEM TX 8i-s --- upper turret --- - - - turret stations 8 --- lower turret --- - - - turret stations 7 Swiss type- and fixed head lath | TRAUB - TNL 18 equipped with bar feeder, chip conveyor, fire protection system, high-pressure pump (50 bar) The machine has approx. 28.900 H spindle hours. An extensive tool package is in the Scope of delivery includes. The machine is in a well-maintained condition and can be inspected under power at any time. Bodpfx Asxh S Hpocyslp The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: TNL18 | TNL 18 | TNL-18

Condition: used, Year of construction: 2011, bar material dia. 32 mm spindle passage 38 mm turning length 320 mm turning speeds 8000 U/min c-axis 0,001 ° Grad gripping station 32 Bsdpfx Asw Ed Tfscyjlp turning length 150 mm turning speeds 8000 U/min c-axis 0,001 ° Grad number of tools 4+7+6+10 =27 number of milling stations 4+4 control Mitsubishi M70 Number of axles 5+2x C Achse 7 St. chip conveyor ja/yes LNS total power requirement 7,5/5,5 kW weight of the machine ca. 3300 kg dimensions of the machine ca. 2,5 x 1,2 x 1,82 plus FMB m swiss type machine Citizen A32-VIIPL,built 2011, with Barloader FMB Turbo 3-36, Excellent conditions. Main spinle motor and spindle bearing are new. Attachmment: all comes with. It is the only one in the production.

Condition: good (used), Year of construction: 2003, operating hours: 41,852 h, Workpiece Specifications: Max Swing Diameter: ~2500 mm (98.4 inches) Max Turning Height: ~2000 mm (78.7 inches) Max Workpiece Weight: ~10,000 kg (22,046 lbs) (depending on configuration) Spindle Specifications: Spindle Drive Power: ~50 kW (67 hp) (approximate, depending on model) Spindle Speed Range: ~10-500 rpm (variable, depending on model) Spindle Taper: Typically a large taper suitable for heavy-duty turning. Table Specifications: Table Diameter: ~2500 mm (98.4 inches) Table Load Capacity: ~10,000 kg (22,046 lbs) Axis Travel: X-Axis Travel: ~2000 mm (78.7 inches) Z-Axis Travel: ~2000 mm (78.7 inches) Bsdpfevy Ti Hsx Acyelp Tooling: Tool Holder Type: Typically VDI or similar heavy-duty tool holders. Number of Tools: Depending on the turret configuration, typically 12 or more tools. Accuracy: Positioning Accuracy: ~0.01 mm (0.0004 inches) Repeatability: ~0.005 mm (0.0002 inches) Dimensions and Weight: Machine Weight: ~30,000 kg (66,139 lbs) (approximate) Machine Dimensions: ~5000 x 4000 x 4000 mm (196.9 x 157.5 x 157.5 inches) (approximate) Additional Features: Coolant System: High-pressure coolant system for efficient chip removal and cooling. Automation: Optional automation systems for loading/unloading of workpieces. CNC Control: Advanced CNC control for complex machining tasks.