Used Crank for sale (576)

Condition: used, Year of construction: 2010, pressure 600 t distance between columns 3640 mm stroke fix 350 mm no. of strokes 11 - 44 /min dayligth (stroke and adjustment up) 1550 mm column travel -side 2200 mm table surface area 3600 x 2500 mm ram surface 3600 x 2500 mm ram adjustment 400 mm band width 2000 mm material thickness 0,6 - 2,5 mm Bwedpozrppcjfx Albet material cross-cut 1600 x 2,5 mm² coil weight 35,0 t Number of Straightening rolls 13 0 straightening roll diameter 50 mm Blanking Line (press, coil line, blank stacking system) yom 1993 - 2010: new control Siemens S 7 - press Schuler type EBS 4-600 with infinitely variable drive, fly-wheel brake, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, ram interlocking moving tables (2x) without rails for the moving tables - decoiler make Schleicher, type HE - 355 - 2100, yom 1994 with auxiliary drive, snubber roll - coil lifting device - extractor device make Schleicher - shear - straightening machine make Schnutz, type RME 18/50/13-2000 TZ, yom 1994 with infinitely variable drive, 30 intermediate rolls, 117 supporting rolls - coil loop bridge - roll feed make Schleicher, type WV-SYS-A 160-2000, yom 1994 - blank stacker NSM-Magnettechnik stored in dismantled condition - Video before dismantling available

Condition: used, briquette diameter: 50 mm, overall weight: 2,000 kg, Crank-driven briquetting press BL250-50 briquettes with a diameter of 5 cm Bwodpfx Alezt H Swebjt Output: 250 kg/hour.

Condition: used, Rotary table, dividing head, machine rotary table Table diameter: 250 mm Table height: 95 mm Table bore: Ø 25 mm Gear ratio: 90:1 Clamping surface: 375 x 295 mm Hole spacing on clamping surface: approx. 340 mm, Ø 18 mm - Indirect division via handwheel on the worm gear, gear ratio: 90:1 - Worm gear can be swiveled in and out for direct and indirect division - Clamping via 2 clamping levers in any position - 12-fold indexing and a readable degree scale on the rotary table - Crank with perforated disc - 1 perforated disc with 17, 19, 28, 32, 33, 39, 40 holes - 12 mm T-slots in the table top - Table surface slightly countersunk Overall dimensions L x W x H: 500 x 375 x 95 mm Bwjdpfx Aszpbrqjlbet Weight: 40.5 kg Good condition

Condition: good (used), Crank winch, Dunkraft, Karohebebock, steel winch -Manufacturer: VEB, steel winch with ratchet safety crank type 10.10 -Load capacity: 10 t -Lifting height: 330 mm Bwodpfx Aot H Trdolbjt -Dimensions: 300/210/H685 mm -Weight: 35 kg

Condition: good (used), Crank winch, Dunkraft, Karohebebock, steel winch -Loading capacity: 10 t -Safety crank Bsdpeb A I Hnefx Albewt -self-locking gearbox -with profiled head claw -with firm claw -Weight: 50 kg

Year of construction: 1988, condition: used, Crank winch, Dunkraft, diamond jack, steel winch -Manufacturer: Pfaff, steel winch type 0104000 -Load capacity: 1.5 t -Lifting height: 0.35 m -Number: 4x winch available -Price per piece Bwedjhgm D Hepfx Albjt -Dimension: 740/120/140 mm -Weight: 10.3 kg / pc.

Condition: excellent (used), Year of construction: 1959, functionality: fully functional, pressing force: 400 t, stroke length: 450 mm, table width: 2,050 mm, table length: 1,500 mm, Weingarten OK 400.21.45 Press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. Bwsdpfsv E Rm Hjx Albst New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Weingarten OK 400.21.45press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2023. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Rotary table, indexing table, dividing head WMW type D 315 k Serial no.: 10930 Bsdpfx Asxf Uytslbowt Table diameter: 315 mm Table height: 135 mm Gear ratio: 90 : 1 - Crank handle with indexing plate and sector arm - Graduated scale ring for reading at the crank - Readable degree graduation on the rotary table - Swing-out worm for direct indexing - Clamping via clamping lever - 14 mm T-slots in the table plate (one place damaged) - Built-in indexing plate: 23-28-33-42-51-61 Weight: 85 kg

Condition: used, Year of construction: 1950, machine/vehicle number: 26284, functionality: unexamined, power: 1.6 kW (2.18 HP), pressing force: 30 t, overall weight: 1,100 kg, We offer this used Raskin 30TRG crank press, year of construction 1950. Machine has not been used for 30+ years and was sitting in a corner of the workshop under a tarp. Now it must go. Bsdpfx Aloza En Ssbowt Untested and condition unknown, but was working when put aside, and externally looks in working order. Included is the punching tooling visible on the pictures (on the pallet + cardboard box).

Condition: used, Dividing Head Center Height: 100 mm Transmission Ratio: 40:1 Spindle Taper: SK 40 with M16 draw thread Clamping Surface: 240 x 200 mm Grid Pattern on Clamping Surface: 210 x 125 mm, Ø 14 mm - 3-jaw chuck Ø 125 mm with step jaws - Crank handle with indexing plate and sector arms - Crank handle with swing-out indexing plate for direct dividing - 1 indexing plate with hole counts: 15, 18, 21, 29, 37, 43, 51 - 1 indexing plate with hole counts: 16, 19, 23, 31, 39, 47, 53 Bwsdpfxsy E T Dgs Albjt - 1 indexing plate with hole counts: 17, 20, 27, 33, 41, 49, 57 - 24-position index (15° increments), graduated scale on work spindle - Complete dividing head, rotatable and tiltable on the base plate Dimensions (L x W x H): 410 x 370 x 300 mm Net weight: 48 kg Good condition

Year of construction: 1965, condition: used, machine/vehicle number: 4447, working width: 2500 mm metal sheet thickness: 4 mm throat: 70 mm rear stop: 520 mm power: 380 V, 6,3 kW Bwjdpfxeb H Ibuo Albot space needed: 3200 x 2300 x 1270 mm weight: 4600 kg

Year of construction: 1971, condition: ready for operation (used), Large working width: 2000 mm for sheets up to: 3 mm clear distance between columns: 2050 mm throat depth: 250 mm Support table size: 220 x 2200 mm electr. Drive: 380 V, approx. 5 kW Weight: 2.7 tons Bwodpfx Ajhy Tqaelbst

Condition: used, Rotary Table WMW Type D 315 k Rotary table with mechanical drive, crank, and scale Dividing head, indexing table Serial No.: 16508 Bwsdpfsxcbpiex Albot Table diameter: 315 mm Table height: approx. 135 mm Transmission ratio: 90:1 - Crank with index plate and sector arm - Scale ring for reading at the crank - Readable degree graduation on the rotary table - Pivotable worm gear for direct indexing - Clamping via clamping screw - 14 mm T-slots in the table surface - Cardan drive - Built-in index plate: 17-25-30-39-47-57 - Rotary table drive suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E - Dividing head (index plate = 20) suitable for console milling machine WMW HECKERT Type FU 315 E, possibly also for FU 400 E Weight: 145 kg Good condition

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2026, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) Bedpfx Aljxrtarebewt ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: new, 9D715US crankshaft balancing machine is adapted for balancing crankshafts of various designs, including crankshafts of V6, V8, V10 and V12 engines, with balancing weights on the connecting rod pins: - Balancing of crankshafts of any design - Shaft weight up to 300kg - Shaft length up to 1400mm - Drilling module for unbalance correction The machine design allows balancing crankshaft separately, as well as crankshaft complete with flywheel and clutch, which guarantees minimum unbalance during engine operation. Bodpfewk Ittox Albswt MACHINE HIGHLIGHTS • Hard-bearing supports - safe operation with high initial unbalance at low speeds. • Roller cassettes with large diameter spherical rollers and provide the required accuracy for balancing heavy shafts. • Replaceable antifriction prismatic V-blocks allow balancing of crankshafts with low mass or with special bearing journals. • Narrow support stands of the machine allow balancing of crankshafts with complex configuration and with “narrow” bearing journals. The 9D715US machine has a cassette width of 27 mm, which is the best in its class. • For balancing V-shaped crankshafts, the machine can be equipped with counterweights (variable weight) to simulate the weight of connecting rods. • A vertical drilling module mounted on its own guides allows unbalance in the crankshaft counterweights to be corrected directly on the machine. • The frequency converter drive provides smooth acceleration and deceleration of the electric motor and infinitely variable speed control of the rotor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • Measuring balancing system has additional necessary functions for crankshaft balancing: - recalculates the unbalanced mass to the drilling depth, taking into account the drill diameter and the permissible drilling depth. - It recalculates the unbalance on several correction planes, so that unbalance can be corrected in neighboring crankshaft counterweights. SPECIFICATIONS Weight range of balanced rotors 3 - 300 kg Maximum rotor diameter (above the bedding) 1100 mm Diameter of rotor support journals 20 - 140 mm Distance between centres of rotor journals 150 – 1350 mm Support type Rollers / V-blocks Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.4 g.mm/kg Rotor speed range 300 – 1500 rpm Electric motor power 2.2 kW Parameters of the supply network 380V, 3 Ph, 50Hz VTM Group balancing machines will allow you to do your job well and get positive feedback and attract more customers. Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Condition: used, Year of construction: 2019, operating hours: 15,551 h, functionality: fully functional, controller manufacturer: Siemens, controller model: SINUMERIK 840D sl, General Year of manufacture: 2019 Operating hours: 15,551 Control: SINUMERIK 840D sl Maximum workpiece dimensions Workpiece length up to 600 mm Maximum cutting circle mm 200 Stroke over center mm 100 Maximum clamping diameter mm 110 Tip diameter mm 30 – 60 Working area Longitudinal stroke Z-axis mm 705 Longitudinal stroke Z-/W-axis mm 705 / 705 Cross stroke X-axis mm 180 Cross stroke X-/U-axis mm 180 / 180 Bwedpfx Aowgm Hkolbet Steady Z3-axis depends on the chuck Workpiece C21-/C22-axis degrees 360 Tool Outer diameter mm 700 Tool holder Short cone according to DIN 55026: Size: 8 Theoretical diameter of cone mm: 139,735 Tool drum bearing diameter in the front bearing: 160 mm Chuck mount: 180 mm Chuck diameter up to 260 mm Workpiece spindle bearing diameter in the front bearing: 170 mm Guidance system for machining units: Rolling guides with rollers, size 55 Spindle Maximum power at 100% load: 24 kW Spindle speed: 0-2000

Year of construction: 1980, condition: used, The Sledum RG-270 is a high-precision, industrial-grade crankshaft grinding machine developed for the precision grinding of crankshafts in internal combustion engines and the journal surfaces of similar rotating components. The machine is built on a massive cast-iron machine bed, offering high stability and vibration damping. The design enables uniform, high-precision machining of large crankshafts. Bjdpfxozbibls Albewt Key Technical Features: Distance between centers: 2000 mm Maximum swing radius: 270–275 mm Machinable parts: crankshafts, shafts, eccentric rotating components Grinding spindle with high-rigidity bearings Fine-feed cross and longitudinal slide system Machine bed with precision guide rails Adjustable steady rest system for stable support of long workpieces High-power grinding motor for continuous industrial operation Manually controlled feed and positioning system Stable, vibration-damped industrial machine frame Coolant system with preparation/conditioning unit Heavy-duty industrial construction, designed for long service life Accessories and Equipment: Complete headstock and tailstock (counter-spindle) system Grinding spindle unit with grinding wheel mount Adjustable steady rests for long shafts Workpiece clamping system Precision alignment and centering components Grinding wheel mounting flanges Workpiece rotation mechanism Manually controlled operator panel Complete slide system with fine feed Coolant connection points Machine body and industrial machine bed Adjustable workpiece support units

Condition: used, Year of construction: 1981, workpiece length 1500 mm stroke 0 mm swing dia. 500 mm total power requirement 30 kW Bwjdpjt Hwpmsfx Albjt weight of the machine ca. 8 t dimensions of the machine ca. m

Condition: used, Year of construction: 2005, 1 used, very well-maintained crankshaft milling attachment for mounting, e.g., on a lathe for milling crankshafts or other milling operations. Manufacturer: SEMA, Origin: Austria Model: SE 100 Year of Manufacture: 2005 Technical Data: Spindle mounting: ISO 50, Runout / Test mandrel L=300 mm = 0.01 mm Speed range, continuously variable: Currently set to 2,000 rpm Spindle is designed for: Up to 3,000 rpm Drive power: Currently 15 kW The milling spindle is designed for: Up to 25 kW Bearing diameter: 110 mm The 2 bolted adapter plates under the milling spindle are each bolted on. These plates can be used for your lathe, modified, or may need to be newly manufactured. Mounting surface of the milling spindle: L x W: 490 x 250 mm Accessories / Special Features: Milling spindle: • The milling spindle is mounted on the flat support of your lathe • Continuously variable speed adjustment, frequency inverter manufacturer LENZE, designed for up to 30 kW • Right / Left rotation • Lifetime-lubricated spindle bearings • Stable construction with hardened and ground spindle • High precision • 2-fold supported spindle with 5 spindle bearings • Workpiece clamping via a threaded spindle • Mobile carriage with control panel • Emergency stop • Lockable main switch Indexing gear for the main spindle: • A long drive rod is mounted in the spindle bore and connected to the gear • Continuously variable speed adjustment, frequency inverter manufacturer LENZE • Right / Left rotation • Jog operation, fast / slow The pictures show this unit mounted on a universal lathe SARO SPA 10 x 3000 for milling crankshafts. This lathe is not included in the scope of supply! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Bsdoddziyspfx Albjwt D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2006, Milling spindle unit SEMA SE 100, e.g. for the production of crankshafts Spindle mounting: flange Speed with this gearbox: 97 rpm Spindle designed for up to 3000 rpm Drive power, currently: 22 kW The milling spindle is designed for up to 25 kW Bearing diameter: 110 mm Disc cutter SANDVIK Ø 700 x 25 mm Plunge depth of the disc cutter: 235 mm Accessories / Special features: - Disc cutter SANDVIK Ø 700 x 25 mm - Lubricated-for-life spindle bearings - Robust construction with hardened and ground spindle - High precision - 2-fold bearing of the spindle with 5 spindle bearings - WZ clamping via flange Original new price at the time: approx. €34,500.00 net Bwodpfx Aljddzi Ajbjt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Zippel crankshaft cleaning system Zippel Bsdjihfn Ijpfx Albowt Crankshaft cleaning machine L x W x H = 3520 x 520 x 700 mm Further cleaning machines in other sizes - new and used - you will find in our store! International shipping costs on request!

Condition: used, Year of construction: 1999, Lathe with 4 tools only for 3-cylinder crank shaft Bwsdpfx Asw Dufijlbjt *

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. Bsdpfx Aljx I Simjbswt Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, type S2-900 / 190 DKGM In our opinion, the machine is in good used condition and can be inspected under power by appointment. Bodpfex Ik Tkox Albswt There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2013, feed x/z 20/40 m/min rapid traverse (x/z) 18.000 /30.000 mm/min number of tool places 12 Pos. tool taper VDI 50 In our opinion, the machine is in good used condition and can be inspected Bwodpfxox Ik Tds Albet under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!