Wire electrode, aluminum welding wire, aluminum welding wire, aluminum-magnesium alloy welding rod
Qkze7f9rx
-different producers:
-9x Elisental 1.2 mm SG-AlMg5
-1x MTC 1.0 mm AlMg5
-6x ALCAN 1.2 mm S-ALmg 5
-1x Thyssen 1.2 mm AlMg4.5Mn
-Weight: 7 kg/roll
Price: per piece
Welding rectifier, electrode welding device, electrode welding machine
-Electrode welding rectifier type: IDEALARC DC-400
-Welding power: max. 400 A
-Wire feeder type: LN-23P
-Recommended wire sizes: 068 "inches 072" inches 5/64" inches (max. 2.0 mm)
-for: self-protecting flux-cored wire
-with 16 rolls of cored wire manufacturer Lincoln type: NR-203 Ni 1% Ø 2 mm
-Ground cable
-Dimensions: 1350/900/H1250 mm
-Weight: 430 kg
Qlhjj82zf
diameter 1.2 mm
non-copper-plated wire electrode for welding with shielding
gas in all positions
suitable for single-layer or multi-layer welding of
unalloyed and low-alloy steels
shielding gas Ar, CO2 / Ar, CO2, O2 / CO2^
weight 18 kg / roll
Bnscmzdtlt
*price per roll!*
Because of the many questions:
- Yes, machines are in Germany
- yes, there the knives above and below
- there are now only 18 pieces in stock
- suitable for cables 1-45mm diameter
Sujbhg
Stripping machine / peeling machine for cables with a powerful 2.2 kW motor and a net weight of 115 kg.
Shipping by forwarding agency possible throughout Europe
For further information please contact the seller.
Ytcu70
For further information please contact the seller.
Exvo70z7
Surplus stock of welding wires, electrodes and powder
Original packed and sorted
Total gross weight 57160 kg
Total netto weight 53840 kg
Ca 3358 items
Bg8zrzcz79
Nettoprice EUR 550,= per tons netto weight
List available on request
Module converter, electronic module
-Wire type: DSV 5421-10/220
-Module: 220 V/4 KVA/10 A
-with: controller BELIMO SGS
-Dimensions: 275/275/H225 mm
-Weight: 9.7 kg
Bg0wntxmf9
table length 590 mm
table width 590 mm
Benypo8w7c
table load 200 Kg
table turning speeds 0,23 - 2,3 U/min
table height 650 mm
total power requirement 0,55 kW
weight of the machine ca. 600 Kg
Ultrasonic and electrolyte cleaning,
wire cleaning line, wire cleaning plant, wire treatment plant
Manufacturer: Sirio-Wire
Type: M0209
Number of wires / cores: 12 (6+6)
Wire thickness: 1,0 - 5,5 mm; but also stronger wires were run over the line and the achieved cleaning result was very satisfying.
Year of construction: 2006
Vtp7q3
The plant was only in operation for about three years, then the production was moved to another location.
Process: Ultrasonic and electolytic cleaning in a hot bath....
WELDING PROFILES PVC URBAN 310 SR
Manufacturer: URBAN
Equipment Type: WELDING PROFILES PVC
Model 310 SR
Year: 1992
net price
full invoice
Description
Srv07o
WELDING MACHINE FOR PVC PROFILES OF URBAN VERY GOOD CONDITION
CNC plasma and flame cutting machine
Air Liquide Welding (Lincoln Electric)
Oerlikon
Oxytome B40 E RS
Year of construction: 2008
Oxyfuel: 2x MACH-HP propane machine torches (15-150mm)
Plasma: 2x Hypertherm HPR260 with THC
Length complete: 32.000mm
width : 5.895mm
height: 2.400mm
cutting length: 28.000mm
cutting width: 2.500mm
CNC: Burny / AMC 10
Filter system: Kemper
Ink Jet Printer: Hitachi IJ Printer / Model PXR-D
Commissioning on request
Dwsvzq
Module converter, electronic module
Yscxb0
-Wire type: DSV 5421-10/220
-Module: 220 V/4 KVA/10 A
-Dimensions: 275/275/H225 mm
-Weight: 8.1 kg
table diameter 400 mm
table load waagerecht 200 Kg
table load senkrecht 100 Kg
table turning speeds 0,2- 2 U/min
voltage 230 V / 50 Hz
total power requirement 0,55 kW
weight of the machine ca. 65 KG
dimensions of the machine ca. 0,65 x 0,5 x 1,0 m
unused stock machine
manual tilt adjustment
Start-Stop by foot switch
Benyqcbcfe
with CE
Design: at the down part prismatic passges, it can do twin 2 pcs
N7ybd
Size: 5000x1600x370 mm
Price of one 3900 EUR
Complete automatic system for the production of conical buckets, Hobbocks, 10/15/20/25 l
Noyit
Diameter bucket top 285 mm
Diameter bucket bottom 272 mm
Production capacity approx. 50 pieces/min
The plant has been completely overhauled, is in a very good operational condition and is still in production!!!
If necessary, a complete assembly and commissioning can be offered to the buyer!!!
ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs
cost of delivery
cover customer
Startup type
R9uzikcv7
negotiated
Description
Notes
Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of m...
table diameter 450 mm
table load waagerecht 300 Kg
table load senkrecht 150 Kg
table turning speeds 0,2- 2 U/min
voltage 230 V / 50 Hz
Btr9hlva
total power requirement 0,55 kW
weight of the machine ca. 80 KG
dimensions of the machine ca. 0,65 x 0,5 x 1,0 m
unused stock machine
manual tilt adjustment
Start-Stop by foot switch
with CE
weight max. 10 t
workpiece diameter 150 - 2300 mm
Turning speed 70 - 1200 mm/min
roll diameter 300 mm
Wheel width 100/150 mm
total power requirement kW
weight of the machine ca. t
Benypyp3rd
dimensions of the machine ca. 1,8 x 1,5 x 1,0 m
unused vessel turning unit,
with rubberised rolls, manual adjustable roller-spacing,
one device with twin drive with adjustable rotational speed.
Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial no. as per photo, used, normal signs of wear, 100% functional, scope of delivery as per photos
Bokrvelxhz
Capacity Driver 150 tons, Idler 150 tons = 300 tons total
Work piece diameter Minimum 1000 mm - maximum 8000 mm
Tyre width 203 mm
Input 400 / 3 /50
Fitted with Mechanical anti - creep facility
Ufbozsu
Features Rotation speed 75 - 1500 mm per minute
Length Driver 4200 mm, Idler 4000 mm
Width Driver 1550 mm, Idler 1050 mm
Height Driver 1414 mm, Idler 1414 mm
Nett weight approx. 17000kgs
Technical DataPayload: 0/5 KgArm reach: 1.44 mmNumber of Axis: 6Repeatability: 0.05 mmRobot weight: 225 KgMounting: FloorTechnical Data:
• Payload: 5Kg.
• Arm reach: 1440 mm.
• Repeatability:± 0.05 mm.
• Controller: IRC5 M2004
Axis motion speed:
• Axis 1: 110º/s
• Axis 2: 110º/s
• Axis 3: 110º/s
• Axis 4: 280º/s
• Axis 5: 280º/s
• Axis 6: 280º/s
Applications
Stud Welding
Handling of parts
Parts Loading and unloading
...
2013
as good as new (ex-display)
WELDING KD 658
Power supply: 400 V, 3ph, 50-60 Hz
Power output: 8.40 kW
Bsgs8bulgp
Standard welding length: 3,000 mm x 2,585 mm
Min. standard welding length: 420 mm x 420 mm
Welding length with gasket pressing: 520 mm x 570 mm
Max. profile height: 180 mm
Min. profile height: 30 mm
Max. profile width: 120 mm
Air pressure: 6-8 bar
Air consumption: 70 l/min.
Machine height: 1,600 mm
Machine length: 4,600 mm
Machine width: 4,300 mm
Machine weight: 1,900 kg
BUFFER CK 187...
Steel wire sheet cutter
Cutting length 3900 mm
Bjljgfnnw3
Dimensions
Length: 5100 mm
Width: 1700 mm
Height:3100 mm
offer consist of:
- control for stitching wire
T2ak9ifxy
Horizon stitching wire control
function: prevents the stitching wire is used up completely and must be threaded into the stitching head
- compatibel with:
Horizon SPF-200A
Serial No. B11 B7 - 6405
Input 415/3/50hz
Wire brush size 250mm x 50mm
Speeds 1500 / 3000 rpm
Fitted with 2 x work support rests
Length 820mm
Width 430mm
Height 1200mm
Nett weight actual. 140 Kgs.
Egsa8vwiu
Steel wire sheet cutter
Cutting length 3900 mm
Dimensions
Length: 5100 mm
Width: 1700 mm
Height:3100 mm
Br3jurn97r
Agie DWC-01 A Digital Wire Control No. 629604.0 ,used, small traces of use, 100% functional, scope of delivery according to photos
Jvb90e
Amperage 400
Bpz9zj8onz
Input 400/3/50hz
Equipment Ultra wire feed, Mig gun
Length 560mm
Width 400mm
Height 600mm
Nett weight approx. 80 kgs
Equipments:
wire stitcher
good condition without any damage
Bonpkqxy
LINEAR - EDGE WELDING- table size 4000x1500mm- AWI welding machine LORCH V24-DC
Bjbpwwttla
Agie Wire Control DWC-05 M 665.424 , second-hand, slight signs of wear, 100% functional
Fri90wl2
Amperage 400
Input 400/3/50hz
Amperage range 30 - 400
Duty cycle Mig 400A @ 100% MMA 400A @ 80%
Weiding speed 1.5 - 18 m/min
Fitted with 4 roller wire feed, inching.
Equipment Jasic wire feed unit, earth cable, wire gun
Length 595mm
Width 285mm
Height 470mm
Bpz9wud2zq
Nett weight approx. 45 kgs
We offer our Polysoude TIG hot wire welding system for sale.
Ye2ro
It has an AVC control (automatic arc control) and an endlessly rotating welding head! This enables welding without the components having to rotate. It is a standard burner for e.g. sealing surfaces on flanges and 2 welding lances to weld on pipes in the inner diameter or outer diameter. The power source is 600A. The control has a pendulum function. The system is delivered ready for welding with all connecting and connecting cable...