Used Copper Wire Driwing for sale (3,991)

Condition: used, Year of construction: 1999, max 70 mm Cjdpfx Asw Sygasb Tjhf hydraulic ja

Condition: used, Year of construction: 2000, functionality: fully functional, Equipment: compressor, cooling unit, documentation/manual, fridge, EDM (Electrical Discharge Machine) Brand: Sodick Cjdox A Atispfx Ab Tohf Model: AQ325 Year: 2000

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1951, Straightening machine with 4 straightening lines for wire diameters of 8, 10, 12, and 14 mm. Electromechanical drive of the feed rollers and rotating straightening units. Cutting device with automatic imprinting of the manufacturer's identification. Electronic length measurement with rotary pulse encoder. Parallel drive of the straightening lines is possible for 8–14 mm diameter (up to 3 lines max). Control panel with switching and monitoring functions. Program control via SPS Simatic S5. Bar run-out track with a length of 14 m, equipped with 4 collection troughs for wire diameters of 8, 10, 12, and 14 mm. Wire feed consists of 4 wire decoiling reels, pneumatically braked and controlled, for coil weights up to max. 2,500 kg. Cedow Rvg Topfx Ab Tehf

Condition: good (used), Year of construction: 2008, Cutting hours: 7922 h Fanuc 310 iS-WA CNC Csdpfx Aex Dit Sob Tehf X/Y/Z travels: 370 × 270 × 255 mm Max workpiece size: 700 × 600 × 250 mm Tank dimensions: 770 × 600 mm U axis: ±60 mm V axis: ±60 mmMachine fully overhauled by Fanuc

Year of construction: 2015, operating hours: 3,600 h, condition: ready for operation (used), General Data Machine weight 3400 kg Measurements height 2070 mm Measurements depth 1915 mm Chedpfx Aboxzvuko Tef Main Drive Number of axis 3 This 3-axis SEIBU M50AG wire EDM machine was manufactured in 2015. It supports workpiece dimensions up to 800x650x300 mm and a maximum weight of 800 kg. Features include a rapid traversing speed of 1200 mm/min and a fine increment capability of 0.0001 mm for precise machining. If you are looking to get high-quality EDM capabilities, consider the SEIBU M50AG machine we have for sale. Contact us for more information about this machine. Application Types EDM

Condition: used, Year of construction: 2022, table length 640 mm table width 540 mm 810 x 700 x 215 mm travel x / y / z 400 x 300 x 220 mm V-axis 120 mm U-axis 120 mm workpiece weight max. 500 kg Control M800 D-CUBES wire dia. 0,1 - 0,3 mm weight of the machine ca. ca. 3,1 t dimensions of the machine ca. 2,8 x 2,1 x 2,1 m Mechanical engineering concept: Hybrid design Cjdpfx Asvt Ec Ssb Tohf Machine included: - ODS - Optical Drive System - Tubular direct drives in XYUV axes - Linear scales in XYUV axes - Collision protection XYUVZ axes - Intelligent AT - Automatic wire threading for wire diameters 0.10 - 0.3 mm - Automatic fine hole search function - Easy 3D-Setup workpiece position detection - 5 controlled axes - prepared for additional axes - PFC - Precise Finish Circuit - H-FS - Finishing stage - LLS - Long Life System - 10 kg wire station - 4-sided framing table - hardened - Wire alignment block - Wire chopper - Compressor cooler Mitsubishi Electric M800 D-CUBES control system: - 19” full-touch monitor with gesture control - Hand pilot with configurable LCD display - Job planner incl. job interruption function - 3D CamMagic on board - Import of 3D Parasolid, 2D DXF / DWG - Graphic check: 3D, front and side view and top view - Operating and maintenance data output included - Interfaces: Ethernet TCP-IP, 2 x USB port - Corehole technology Incl. the following special options: - ERGO-Lux light Ergonomic workspace lighting with LED floodlight Two LED lights, 3 x 6 watts each IP67 version for use in the work area Anodized aluminium housing with reflector insert - Training course 5-day basic seminar at a Mitsubishi training center Mitsubishi training center for 1 person if attended within 12 months of commissioning. Travel and accommodation costs are at your expense - all dimensions, weight and performance data without obligation - Used machine without warranty - interim sale reserved -

Condition: excellent (used), Mitsubishi wire EDM machine FA20S, year of manufacture: 2006 With accessories More pictures and data will follow shortly. Csdpfx Abjwt N Uqj Tohf

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm Cedpfxsvc Akls Ab Tehf voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine xH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! i.D. *

Condition: not inspected (used), Year of construction: 1996, functionality: unexamined, machine/vehicle number: 6.0138, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 462 mm, table load: 800 kg, controller model: CHARMILLES ROBOFIL 6020 SI, No minimum price – guaranteed sale to the highest bidder! This machine is being auctioned due to the closure of a business. Bidding commits you to timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Travel Paths Travel X-axis: 630 mm Travel Y-axis: 400 mm Travel Z-axis: 462 mm Travel U-axis: ±50 mm Travel V-axis: ±50 mm Workpiece Max. workpiece dimensions: 1,260 x 685 mm Max. workpiece height (immersed): 200 mm Max. load capacity: 800 kg Max. workpiece height between feedthroughs: 360 mm Measuring resolution: 0.5 µm Chjdpfx Aboxqalls Tof Maximum manual speed: 15 mm/s Wire unwind speed Tension, taper offset Maximum workpiece height for wire threading: 300 mm Work tank dimensions: 1,355 x 760 x 425 mm MACHINE DETAILS Control: CHARMILLES ROBOFIL 6020 SI Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,700 x 2,900 mm Weight: 4,000 kg Electrical Details Operating voltage: 380/400 V Frequency: 50 Hz Rated current: 18 A EQUIPMENT Includes matching workshop drawer cabinet with accessories and documentation

Condition: used, Steel cables, wire ropes, lifting slings made of steel Length: 10 m Diameter: 25 mm Loops right/left Load capacity: 5 t 6 pieces available 21225ä Chedpegzpw Ijfx Ab Tjf

Condition: new, The Neospark T 500 is an advanced Wire Cut EDM machine from the renowned brand KNUTH, known for its precision and efficiency in electrical discharge machining. This high-performance machine is ideal for companies specializing in mold and tool making, providing exceptional cutting capabilities for electrically conductive materials, especially when separating 3-D printed components from their base plates. The Neospark T features a rigid cast-iron frame with precision-machined surfaces, ensuring permanent mechanical precision through its advanced linear guides and preloaded ballscrews on all axes. Operating costs are notably low thanks to its cost-effective design, while the user-oriented IPC-based 4-axis control system enhances process reliability. Moreover, it includes a specialized aluminum cutting function that extends wire life and minimizes the risk of breakage during machining. With features like a central lubrication system, easy setup via handheld controls, and integrated CAD/CAM software, the Neospark T 500 is a robust choice for professionals seeking efficient and reliable Wire Cut EDM solutions. To explore this product further, request a quote today. Chedpowt Du Sefx Ab Tjf

Condition: excellent (used), Year of construction: 2010, operating hours: 16,712 h, Sodick AG 400 L Premium in very good condition year of manufacture 2010-11 x, y, z 400 x 280 x 250 mm u, v 120 x 120 mm max. workpiece height 240 mm internal tank dimensions 866 x 626 mm max. workpiece weight 500 kg max. taper 25 degrees 0.1-0.3 mm wire can be used (0.25 mm installed) chiller Chedjx Aix Ejpfx Ab Tef wire chopper quick-clamping system smart grip automatic wire threading complete documentation many accessories machine is under power for inspection.

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, travel distance X-axis: 160 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 150 mm, overall weight: 2,200 kg, In working condition, removed from production, documentation available. Cjdpoxyyrqefx Ab Tohf

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, *Black Week Special Offer until 28.11.2025* AGIECUT Challenge 2 eCut Year of manufacture: 2005 Travel paths (X/Y/Z): 350 x 250 x 256 mm Travel paths (U/V): +/- 70 mm Maximum taper: 30° at 100 mm Maximum workpiece dimensions (length/width/height): 750 x 550 x 250 mm Maximum workpiece weight (with/without tank): 200/450 kg Best achievable surface finish: 0.2 µm Ra Codsxyxfpjpfx Ab Tehf Available wire diameters: 0.10 - 0.33 mm Includes AGIE universal clamping frame Includes AGIE JOGGER handbox Includes control console with USB port The machine will be cleaned, overhauled, and tested by us upon receipt of order. Commissioning and training can also be offered upon request.

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 3,869 h, fuel type: electric, mast type: triplex, Manufacturer & Model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5389 Category: Used Mast Type: Triplex (3F) Lowered Height: 3830 mm Lifting Height: 9800 mm Capacity: 1200 kg Platform Height: 9000 mm Csdexz Ugljpfx Ab Tshf Order Picking Height: 10600 mm Initial Lift: Yes Cabin Width: 1300 mm Year: 2020 Operating Hours: 3869 Battery Capacity: 48 V / 620 Ah Options: FULL options!! - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - PSA - Blue Spot - Adjustable Forks! - Induction / Wire Guidance

Condition: used, Year of construction: 2019, Wire EDM machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Chedpfx Aboxpfy Sj Tjf Year of manufacture: 2019 Operating hours: approx. 9,500 Controller: M800 D-CUBES Mitsubishi Electric control Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel range U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS – Optical Drive System Tubular direct drives in XY axes Linear scales in XY axes Intelligent AT – Automatic wire threading For wire diameters 0.10 – 0.3 mm Automatic small hole detection 5 controlled axes – prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, workpiece weight (max.): 450 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 256 mm, workpiece height (max.): 250 mm, workpiece width (max.): 750 mm, workpiece length (max.): 550 mm, GF AgieCharmilles Progress VP2 Year of manufacture: 2011 Travel paths: X = 350 mm, Y = 250 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 750 x 550 x 250 mm Maximum workpiece weight: 200 kg (submerged) / 450 kg (dry) Achievable surface finish: Ra: 0.20 µm Maximum cutting speed: 500 mm²/min Glass scales on X and Y axes for increased precision Available wire diameters: 0.15 – 0.33 mm Submerged wire-cut EDM machine with automatic wire threading and automatic re-threading after wire breakage Manual front door (accessible from one side) Including AGIEJOGGER hand-held box for convenient setup AGIE IPG-V generator with power module AGIEVISION 5 control system Dimensions (L x W x H): 1640 x 2040 x 2220 mm Net weight: 2580 kg Our machines are cleaned and fully overhauled after order intake. A test cut with optimal surface finish is performed prior to acceptance. Codpfsxyw Ebjx Ab Tohf You will receive a 6-month warranty on the machine. We are happy to offer on-site commissioning and training.

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,883 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5388 Category: Used Mast: 3F Lowered height: 3830 mm Lifting height: 9800 mm Capacity: 1,200 kg Platform height: 9,000 mm Picking height: 10,600 mm Initial lift: Yes Cabin width: 1,300 mm Year: 2020 Operating hours: 4,883 hrs Battery: 48 V / 620 Ah Csdpexz Ugfsfx Ab Tehf Options: FULL options !! – Triplex mast – FFL – SAFETY doors with TILT FUNCTION !! – PSA – Blue spot – Adjustable forks – Induction / wire guidance

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 2,154 mm, total length: 2,050 mm, total width: 2,234 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 800 mm, overall weight: 2,450 kg, warranty duration: 6 months, GF Machining Solutions CUT P350 Year of manufacture: 2020 AC CUT HMI-2 control system Travel paths (X / Y / Z): 350 x 220 x 220 mm Travel paths (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 200 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 800 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed: 400 mm²/min Best surface finish: Ra 0.08 µm Available wire diameters: 0.15 mm to 0.33 mm Overall system dimensions: 2050 x 2234 x 2154 mm Total system weight: 2450 kg Codpfxjxywz Ao Ab Tohf The machine will be cleaned, completely overhauled, and tested for all functions by us after receipt of order. We are pleased to offer you commissioning of the machine as well as operator training on the control system.

Condition: like new (used), Year of construction: 2020, load capacity: 1,200 kg, lifting height: 9,800 mm, construction height: 3,830 mm, operating hours: 4,672 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 412 s Mast: Z + i - 3F9800 ID: 25114.5387 Csdsxz Uf Uopfx Ab Tohf Category: Used Mast: Triplex (3F) Lowered height: 3830 mm Lifting height: 9800 mm Capacity: 1200 kg Platform height: 9000 mm Picking height: 10600 mm Init.: Yes Cabin width: 1300 mm Year: 2020 Operating hours: 4672 hours Capacity: 48 V / 620 Ah Options: - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - PSA - Blue Spot - Adjustable forks - Induction / Wire Guidance

Condition: like new (used), Year of construction: 2021, operating hours: 1,750 h, load capacity: 1,250 kg, lifting height: 7,000 mm, fuel type: electric, mast type: triplex, construction height: 3,200 mm, Manufacturer + model: JUNGHEINRICH EFX 413 Mast: X + i - 120 - 3F7000 ID:25101.6260 Category: Used Mast: 3F7000 Forks: 1200 mm Lowered height: 3200 mm Lifting height: 7000 mm Capacity: 1250 kg Year: 2021 Hours: 1750 hours Battery: 48 v / 750 ah Chedjxz Ufbjpfx Ab Tof Options: - VNA truck - With complete wire guidance, LIKE NEW

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,442 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast:Z + i - 3F5550 ID:25064.5758 Cat.:UsedMast:3F Lowered height:2360 mm Lifting height:5550 mm Capacity:1000kg Platform height:4750 mm Picking height:6350 mm Init.:Yes Cabin width:1500 mm Year:2018 Hours:2441 hours Capacity:48v / 465ah Options:FULL options !!- Mast Triplex - FFL - DUAL controls!!!! - Adjustable Spoons! Chjdpfexz T T Rsx Ab Tsf - 2 x Blue spot -PSA - High beam lights - Induction / Wire GuidanceLIKE NEW !!!

Condition: like new (used), Year of construction: 2018, load capacity: 1,000 kg, lifting height: 5,550 mm, construction height: 2,360 mm, operating hours: 2,482 h, fuel type: electric, mast type: triplex, Manufacturer + model: JUNGHEINRICH EKS 210 Mast:Z + i - 3F5550 Chedpsxz T T Defx Ab Tef ID:25064.5759 Cat.:Used Mast:3F Lowered height:2360 mm Lifting height:5550 mm Capacity:1000kg Platform height:4750 mm Picking height:6350 mm Init.:Yes Cabin width:1500 mm Year:2018 Hours:2482 hours Capacity:48v / 465ah Options:FULL options !!- Mast Triplex - FFL - DUAL controls!!!! - Adjustable Spoons! - 2 x Blue spot -PSA - High beam lights - Induction / Wire GuidanceLIKE NEW !!!

Condition: like new (used), Year of construction: 2017, load capacity: 1,200 kg, lifting height: 9,300 mm, construction height: 4,650 mm, operating hours: 4,903 h, fuel type: electric, mast type: duplex, Manufacturer + model: JUNGHEINRICH EKS 312 Mast: Z + i - 2W8300 ID: 25023.7516 Cat.: Used Mast: 3 Lowered height: 4650 mm Lifting height: 8300 mm Capacity: 1200 kg Platform height: 7500 mm Picking height: 9100 mm Init: Yes Cabin width: 1200 mm Year: 2017 Hours: 4903 hours Capacity: 48 v / 620 ah Options: - PSA ( Sick ) - Induction / Wire Guidance Codexz T Nxepfx Ab Tshf LIKE new !!!

Condition: like new (used), Year of construction: 2017, load capacity: 1,250 kg, lifting height: 9,300 mm, construction height: 4,650 mm, operating hours: 4,723 h, fuel type: electric, mast type: duplex, Manufacturer + model:JUNGHEINRICH EKS 312 Mast:Z + i - 2W8300 ID:25013.7542 Cat.:Demo Mast:2W Lowered height:4650 mm Lifting height:8300 mm Capacity:1200 kg Cedpfx Aexz T Nrsb Tohf Platform height:7500 mm Picking height:9100 mm Init.:Yes Cabin width:1200 mm Year:2017 Hours:4723 hours Capacity:48 v/ 620 ah - Bj 2015 Options:- PSA ( Sick ) - Induction / Wire GuidanceLIKE new !!!