Used Channel for sale (958)

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, shaft straightening system -Pipe straightening system for: steel pipes or shafts, flame straightening with water cooling Dsdpjctmvzofx Ab Tswf -Drainage channel and water pump -2x: Counter-holder prism -Counter bearing: adjustable -Dimensions: 4000/870/H810 mm -Empty weight: 500 kg

Condition: excellent (used), CTS Model: C-40/350 Air-cooled climate test chamber For sale is a professional CTS climate test chamber, model C-40/350. This unit is designed for demanding environmental simulations in industrial applications and is ideal for material testing, electronics, automotive, aerospace, and research. Temperature Testing: - Temperature range: -40°C to +180°C - Temperature deviation: ≤ ±0.3 K over time - Temperature change rate according to IEC 60068-3-5: * Heating: 3.5 K/min * Cooling: 4 K/min - Heat compensation: Dwsdpfox Ekupjx Ab Tef * approx. 3500 W at +20°C * approx. 2000 W at -20°C Climate Testing: - Temperature range: +10°C to +90°C - Humidity range: 10% to 95% relative humidity - Dew point range: +5°C to 78°C - Temperature deviation: ≤ 1.0 K over time - Humidity deviation: ≤ ±3.0% r.h. over time The technical data refer to an ambient temperature of +25°C, rated voltage 400V, without test specimen, without heat compensation, and without additional equipment. Options may affect performance data. Technical Specification: - Refrigeration unit: air-cooled, low-noise, fully hermetic, variable power control by electronic monitoring and control system, environmentally friendly refrigerant R404A - Test chamber: * Floor loading: 150 kg/m² * Shelving grid: stainless steel, support area 620 x 600 mm * Max. load per shelf: 35 kg * Max. total load with maximum shelves: 100 kg Control System: - 32-bit controller - LCD control panel - Digital display of setpoint and actual values - Numeric input for setpoints - Plain-text error messages - RS 232 interface - Ethernet interface - Free switching channels for external test item control Dimensions: - Test chamber volume: 350 liters - Internal dimensions: Height 750 mm × Width 650 mm × Depth 720 mm - External dimensions: Height 1800 mm × Width 850 mm × Depth 1640 mm Operating Data: - Electrical connection: 400V 3/N, 50 Hz - Rated power: 7.1 kW - Rated current: 11.5 A - Protection class: IP 54 - Sound pressure level: (value not specified)

Condition: new, Empty weight: 176.000 kg Dimensions (LxBxH): 1500 x 1500 x 3500 cm Cargo space capacity: 2.200.000 l Thickness of tanker walls: 10 Thickness of end walls: 8 mm Thickness of partition walls: 6 Number of fillers: 2 1. SILO CAPACITY: 3.000 TONNES 2. SILO HEIGHT: 35 000 mm 3. SİLO DIAMETER: Ø 12.400 mm Dodpfx Absx D Dgyj Tswf 4. QUANTITY OF SILO LEGS: 7 5. SILO OUTPUT DIAMETER: Ø 400 mm 7. SILO WEIGHT: 176.000 kg 8. MATERIAL OF SILO LEGS: Ø273 x 20 mm STEEL PIPE 9. SUPPORT OF SILO LEGS: NPL 80 mm 10. SHEET METALS OF SILO LEG: 20-25 mm 11. CONICAL PART SUPPORT MATERIAL: 160 mm STEEL C CHANNEL. 12. CONICAL PART MATERIAL: ST- 37, 10 mm SHEET METAL 13. SILO BODY MATERIAL: ST -37, 10 - 8 - 6 -5mm SHEET METAL 14. TOP COVER MATERIAL OF SILO: ST -37, 5 mm SHEET METAL. 15. INNER MAN HOLE IS INCLUDED. 16. OUTER MAN HOLE IS INCLUDED. 17. SILO ROOF INCLUDES PAREPETS. 18. MAINTENANCE PLATFORM IS INCLUDED. 19. CHARGING PIPE: 4’’ PIPE UP TO SILO LEG. 20. STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS. Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns

Condition: ready for operation (used), Year of construction: 2018, This ECKERT Onyx was manufactured in 2018. It features a robust table size of 2500 × 13000 mm and a cutting table of 2500 × 13500 mm, equipped with two fume exhaust channels. It includes two gas cutting heads capable of handling up to 300 mm thick mild steel and a Kjellberg Smart Focus 300 plasma source. Ideal for large-scale cutting tasks. Contact us for more information about this machine. Application Types Cutting Dwjdex D N A Tepfx Ab Tef

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. Dwodpfx Ashwrhujb Tjf The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned Dwsdpfx Abex Dnb Ue Tjf • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Year of construction: 1996, condition: good (used), Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower Dwedpfx Abjvam Hlo Tof -Manufacturer: Piller, double radial fan. -Type: 2 M 10 1800 -Engine power: 15 kW / 2965 rpm -Volume flow: 0.27 m³/s -Connection input: Ø 160 mm -Connection: Ø 100 mm -Protection class: IP 44 -Dimensions: 900/1150/H1275 mm -Weight: 367 kg

Condition: new, sheet thickness: max. 30 (bei 280 MPa) / max. 22 (bei 360 MPa)total power requirements: 124weight approx.: 54000messurements (LxWxH): 8000 x 2300 x 4700CAPACITYMax. thickness (280 MPa) mm 30 Max. thickness (360 MPa) mm 22 Max. flat plate diameter mm 7000 Min. flanging diameter (ØD) mm 1700 Min. flanging diameter (with additional manual   device) (ØD) mm 1200 Flanging (knuckle) radius (r) mm 120-850 Max. head height (H) mm 1535 Max. torispherical head diameter (ØD) mm 6000 Max. elliptical head diameter (ØD) mm 5500 Total power kW 124 SIZELength mm 8000 Width mm 2300 Height mm 4700 Weight (Approx.) Ton 54    QUOTATION SCOPE OF SUPPLY & PRICING FMB 30x7000 FLANGING MACHINE Special steel and heat treated (one) knuckle roll – R100 mm Special steel and heat treated (one) flanging roll Hydraulic bottom support rollers adjustable in height Manual centralized auto-lubrication Control panel placed on the body Djdpfox Dfmhsx Ab Tewf Hydraulic (air) oil cooler Variable speed of rotation Automatic flanging feature (called CNC/NC by other manufacturers) Lightning for flanging area Telescopic and stainless protection cover sheet for bottom head holder channel Top and bottom head holders driven by hydro-motors Rear lifting cylinder Roll changing device

Condition: new, Empty weight: 18.600 kg Dimensions (LxBxH): 365 x 365 x 2500 cm Cargo space capacity: 220.000 l Thickness of tanker walls: 6 Thickness of end walls: 5 mm Thickness of partition walls: 4 Number of fillers: 2 1. SILO CAPACITY: 300 TONNES 2. SILO HEIGHT: 25.110 mm(With 3 Meters Concrete Frame) 3. SİLO DIAMETER: Ø 3.650 mm 4. QUANTITY OF SILO LEGS: 4 5. SILO OUTPUT DIAMETER: Ø 300 mm 7. SILO WEIGHT: 18.600 kg 8. MATERIAL OF SILO LEGS: Ø219 x 18 mm STEEL PIPE 9. SUPPORT OF SILO LEGS: NPL 80 mm 10. SHEET METALS OF SILO LEG: 20-25 mm 11. CONICAL PART SUPPORT MATERIAL: 100 mm STEEL C CHANNEL. 12. CONICAL PART MATERIAL: ST- 37, 6 mm SHEET METAL(S265) 13. SILO BODY MATERIAL: ST -37, 5-4 mm SHEET METAL 14. TOP COVER MATERIAL OF SILO: ST -37, 4 mm SHEET METAL. 15. INNER MAN HOLE IS NCLUDED.(Optional) 16. OUTER MAN HOLE IS INCLUDED. 17. SILO ROOF INCLUDES PAREPETS. 18. MAINTENANCE PLATFORM IS INCLUDED. 19. CHARGING PIPE: 4’’ PIPE UP TO SILO LEG. 20. PLATFORMS AND SERVICE LADDER FOR PLATFORM GALVANISED PNEUMATIC AND ELECTRICAL CONNECTION PERFORMED Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 125- 140 microns ----- 500 Tonness CAPACITY BOLTED CEMENT SILO TECHNICAL SPECIFICATIONS SILO CAPACITY 500 TONS, 385 m³ (cement density as 1,3 ton/m³) SILO HEIGHT 19.945 mm SILO DIAMETER Ø 6.180 mm QUANTITY OF SILO LEGS 6 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 250 SILO WEIGHT 28.000 kg(Wtih Legs:35000kgs) MATERIAL OF SILO LEGS Ø273 x 12 mm STEEL PIPE SUPPORTS OF SILO LEG NPL 80 mm CORNER IRON SHEET METALS OF SILO LEG 20 mm CONICAL PART SUPPORT MATERIAL 200 mm STEEL C CHANNEL CONICAL PART MATERIAL ST- 37, 8 mm SHEET METAL SILO BODY MATERIAL ST -37, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL ST -37, 6 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG Dsdpfx Abox D Dgtj Tjwf INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS. Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns ----- SILO CAPACITY 1.000 TONS SILO HEIGHT 20840 mm SILO DIAMETER Ø 8250 mm QUANTITY OF SILO LEGS 8 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 191 SILO WEIGHT 72000 kg(With Legs:75 000kgs) MATERIAL OF SILO LEGS Ø273 x 10 mm STEEL PIPE SUPPORTS OF SILO LEG 100 mm C CHANNEL SHEET METALS OF SILO LEG 25-30 mm CONICAL PART SUPPORT MATERIAL 160 mm STEEL C CHANNEL CONICAL PART MATERIAL S235JR, 10 mm SHEET METAL SILO BODY MATERIAL S235JR, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL S235JR, 5 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS.

Condition: ready for operation (used), Year of construction: 2000, This Star SA-12 swiss type turning machine was manufactured in 2000. It features a workpiece conveyor SA12/16, 15° indexing of the main spindle, a 3-spindle cross-boring unit ER11, and a red signal light. Additionally, it includes an FMB minimag 3200 "A" and a Minimag feed channel. Consider the opportunity to buy this Star SA-12 swiss type turning machine. Contact us for more information. Application Types Turning Dsdpox D Dl Aofx Ab Towf

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator Dwjdsv I Akvjpfx Ab Tof - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla high-level dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks Dwsdpfox A U Ncjx Ab Tsf • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test.

Condition: used, mileage: 141,050 km, power: 105 kW (142.76 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, first registration: 01/2020, emission class: euro6, color: silver, number of seats: 2, total length: 5,267 mm, total width: 2,020 mm, total height: 2,365 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle number: 5350X ----Why autonext GmbH? One of the largest commercial vehicle exhibitions in Germany Over 400 vehicles available immediately at all times Largest selection - Best price Over 1,000 satisfied customers per year - Top customer ratings WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent Condition 1 previous owner, German vehicle Full service history exclusively at Mercedes-Benz Rear winter tires as new Dodpsxq D Azofx Ab Tswf Rear summer tires as new Body type: Compact panel van Automatic transmission High-quality "bott" workshop interior LED high performance headlights Active Distance Assist Distronic Blind Spot Assist Lane Keeping Assist Parking package with reversing camera Navigation system with MBUX multimedia system Smartphone integration: Apple CarPlay, Android Auto Driver’s suspension seat with seat heating & lumbar support Summer tires on steel rims Winter tires on steel rims 8 tires (dual sets) Upon request, we can retrofit a towbar for only €599; if possible, also with trailer load increase up to 3.5 tons ---- Special Equipment: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * Park Assistance Package * Parking package with reversing camera * Reversing camera * Electrically folding exterior mirrors * Exterior mirrors with Blind Spot Assist * 3-button remote for central locking * Storage compartment above windscreen * Passenger airbag * Active Distance Assist Distronic * Exterior mirrors electrically adjustable & heated, both sides * 1-pole battery isolator switch * Anti-theft alarm system * Driver assistance system: Active Brake Assist * Driver assistance system: Active Lane Keeping Assist * Driver assistance system: Attention Assist (drowsiness detection) * Heated windscreen * Smartphone holder * Additional main key * Rear doors (opening angle 270 degrees) * Hinged cover for storage compartment * Climate control (Tempmatik) * Instrument cluster with colour display * Head airbag system (windowbag) * Fuel tank: main tank 92L * Dashboard charging package (additional USB ports & 12V socket) * Wiring channel at rear portal * Wiring channel on side wall * Leather steering wheel * Steering column mechanically adjustable * Metallic paint * Navigation system for MBUX Multimedia System * Fog lights with cornering function * Windscreen wipers with rain sensor * LED High Performance headlights * Shoulder/lap airbag (thorax-pelvis sidebag) driver’s side * Seatbelt warning system (passenger side) * Cab seats: heated driver’s seat * Cab seats: driver’s seat with armrest * Cab seats: driver’s seat with lumbar support * Cab seats: Comfort suspension seat, driver’s side * Fleece battery 92 Ah * Heat-insulating glazing (windscreen with upper band filter) * Additional electric (air) heater Standard Equipment: 3rd brake light, Adaptive brake light, Driver’s airbag, Hill Start Assist, Anti-lock braking system (ABS), Traction control system (ASR), Drive type: front wheel drive, Wash fluid level indicator, Outside temperature display, Cab headliner, Automatic driving light activation, Entry handle for sliding door on load compartment partition, Electronic brake force...

Condition: used, Three-phase power meter, current, voltage and power measurement, long-term recording, energy metering 3-phase power measuring device, ammeter, voltmeter, digital multimeter, active power, apparent power, reactive power BEHA Type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis Display: LC multifunction display with backlight Dwodpfx Ajx A Imzsb Tef Refresh rate: approx. 2 sec. Data logger: 512 kB non-volatile memory (max. 21,000 readings, max. 10 measurement series) Sampling rate: 5 s, 30 s, 1 min, 2 min (adjustable) Data transfer: via optically isolated RS232 interface Manual reading memory: max. 99 readings Overvoltage category: CAT III 600 V Power supply: 8 x 1.5 V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included) Voltage measurement: 3 input channels with common reference point "N" Measurement range: 0–600 V rms Display range: 0–999.9 V rms Resolution: 0.1 V Mains frequency: 50 Hz Current measurement: Input range I1, I2, I3: 3–999.9 A Input I4: 3–250 A Display range: 0–999.9 A Resolution: 0.1 A Clamp opening: 40 mm Active power: Option to display the active power of a single input or the total value Display range: 0–999.9 kW Resolution: 0.1 kW Apparent power: calculated from the RMS values of voltage and current Display range: 0–999.9 kVA Resolution: 0.1 kVA Frequency measurement: Range: 45–80 Hz Resolution: 0.1 Hz Accessories: - Carrying case - User manual - 4 current clamps - 4 measuring leads with crocodile clips - RS232 adapter cable - Plug-in power supply 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: kg Device tested, fully functional. The housings of 2 current clamps are damaged and the battery compartment is slightly oxidised, see pictures.

Condition: new, Empty weight: 75.000 kg Dedpfox D Dgasx Ab Tewf Dimensions (LxBxH): 825 x 825 x 2084 cm Cargo space capacity: 740.000 l Aerial platform: Yes Thickness of tanker walls: 8 Thickness of end walls: 6 mm Thickness of partition walls: 5 Number of fillers: 2 SILO CAPACITY 1.000 TONS SILO HEIGHT 20840 mm SILO DIAMETER Ø 8250 mm QUANTITY OF SILO LEGS 8 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 191 SILO WEIGHT 72000 kg(With Legs:75 000kgs) MATERIAL OF SILO LEGS Ø273 x 10 mm STEEL PIPE SUPPORTS OF SILO LEG 100 mm C CHANNEL SHEET METALS OF SILO LEG 25-30 mm CONICAL PART SUPPORT MATERIAL 160 mm STEEL C CHANNEL CONICAL PART MATERIAL S235JR, 10 mm SHEET METAL SILO BODY MATERIAL S235JR, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL S235JR, 5 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS.

Year of construction: 2014, operating hours: 100 h, condition: ready for operation (used), General Data Measurements width 1000 mm Measurements depth 4500 mm Measurements height 1800 mm Machine weight 2200 kg Control Unit Dodsx D H Sfepfx Ab Tswf Brand FANUC Model 31t- Model B Controller Brand FANUC Model 31i B Main Drive Spindle speed range 5000 Number of axis 3 Workpiece Workpiece weight 4.5 kg Additional Equipment Automatic bar loading magazine with adjustable part length and bar diameter Remnant extraction system Guide channel made of polyurethane plastic Displacement system for longitudinal movement This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), mileage: 591,871 km, power: 353 kW (479.95 HP), first registration: 04/2014, fuel type: diesel, color: yellow, axle configuration: 8x4, tire size: 385/65R22.5, fuel: diesel, wheelbase: 6,600 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, Year of construction: 2014, Equipment: ABS, air conditioning, crane, cruise control, differential lock, low noise, soot filter, traction control, = Additional Options and Equipment = Dodpfx Aow I Di Rjb Tewf - Airbags - Alarm system - Leaf suspension - Brake booster - Electric windows - Electronic braking system (EBS) - High beam headlights - Speed limiter - Power steering - Air horn - Fog lights - Particulate filter - Radio/CD player - Radio/cassette player - Reverse camera - Sun visor - Stability control - Pre-heating system - Power take-off (PTO) - Central locking system = Notes = MAN TGS 41.480 | 8X4 | HMF 1643-Z2 | Remote control | Hyva hooklift | 591,871 km | 2014 | Euro 5 | Heavy-duty configuration | Leaf suspension | Manual transmission | Reversing camera | NL truck VIN: WMA39SZZ2EM640763 Road transport services: NL transit plates with insurance + €150 Sea transport services: Transport to port (Antwerp/Rotterdam/Amsterdam) + €300 Transport to port Zeebrugge + €400 More about Geerts Trucks & Trailers: YouTube Channel: Geerts Trucks & Trailers Instagram: Geerts Trucks & Trailers Facebook: Geerts Trucks & Trailers TikTok: Geerts Trucks & Trailers LinkedIn: Geerts Trucks & Trailers Like and subscribe to our LATEST stock = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,419 cc Driveline AdBlue system: Yes Transmission Transmission: 8-speed manual gearbox Axle configuration Brakes: Disc brakes Suspension: Leaf suspension Front axle 1: Tire size: 385/65R22.5; Max axle load: 9,000 kg; Steering; Axle brand: BRIDGESTONE; Left tire tread: 40%; Right tire tread: 40% Front axle 2: Tire size: 385/65R22.5; Max axle load: 9,000 kg; Steering; Axle brand: BRIDGESTONE; Left tire tread: 40%; Right tire tread: 40% Rear axle 1: Tire size: 315/80R22.5; Twin tires; Differential lock; Max axle load: 11,500 kg; Axle brand: AEOLUS; Left inner tire tread: 50%; Left outer: 50%; Right inner: 50%; Right outer: 50%; Reduction: outer planetary axles Rear axle 2: Tire size: 315/80R22.5; Twin tires; Differential lock; Max axle load: 11,500 kg; Axle brand: MICHELIN; Left inner tire tread: 50%; Left outer: 50%; Right inner: 50%; Right outer: 50%; Reduction: outer planetary axles Dimensions Dimensions (L x W): 942 x 255 cm Weights Curb weight: 16,960 kg Payload: 24,040 kg Gross vehicle weight (GVW): 41,000 kg Functional Crane: HMF 1643-Z2, year 2014, mounted behind the cab Condition Technical condition: very good Visual condition: very good Further information Contact Olivier Geerts or Edwin Geerts for more information.

Condition: new, Empty weight: 240.000 kg Cargo space capacity: 3.000.000 l Productivity: 120 tph Dwodpfx Aex D Dfieb Tsf FULL AUTOMATIC TOWER ASPHALT PLANT 1.1 COLD AGGREGATE FFEDING CHASSIS(6*12m3) 6 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 3 2.9 Filler stock silo 25 M3 2 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 2 Set 3.5 Filler Screw Conveyor 2 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 50 Ton capacity boiling oil heating isolation bitumen tank(One for PMB)With Stirrer(Vertical) 3 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 50 Ton capacity boiling oil heating isolation bitumen tank 1 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.000.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET 6 Granulator Feeder(Fiber Feeding with fan drive) 1 SET 7. Col Asphalt Recycling System(5m3 Hopper Feeder,500x22000mm Belt Conveyor,800x4000mm Belt Conveyor with Weighing System) 1 SET 8. Cladding(3 mm Deck Sheet on 50x50 Box Profile Coating) for Aggregate Hopper and Mixer Floor 1 SET 9. Real Time Gas Emission Measuring and Monitoring System(Integrated with PLC and Plant Automation)(Obserable by internet Connection) 1 SET 10. Dust Monitor PCE-PQC 23US Incl. Calibration Certificate 1 SET

Condition: new, power: 450 kW (611.83 HP), fuel type: gas, color: blue, Year of construction: 2021, Year of manufacture: 2021 Empty weight: 215.000 kg Make of engine: Perkins Cargo space capacity: 4.000 l Productivity: 240 tph 1.1 COLD AGGREGATE FFEDING CHASSIS 5 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 1 2.9 Filler stock silo 25 M3 1 Djdjx D Dfcopfx Ab Towf 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 1 Set 3.5 Filler Screw Conveyor 1 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 40 Ton capacity boiling oil heating isolation bitumen tank 4 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 30 Ton capacity boiling oil heating isolation bitumen tank 3 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAl GENERATOR CHASSIS GROUP 5.1 1.500.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET

Condition: new, color: blue, Year of construction: 2022, Empty weight: 300.000 kg Cargo space capacity: 3.000.000 l Warranty: 24 months Productivity: 240 tph 1.1 COLD AGGREGATE FFEDING CHASSIS 5 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 1 2.9 Filler stock silo 25 M3 1 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 1 Set 3.5 Filler Screw Conveyor 1 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 40 Ton capacity boiling oil heating isolation bitumen tank 4 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET Dwjdpfx Aox D Ddxsb Tjf 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 30 Ton capacity boiling oil heating isolation bitumen tank 3 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.500.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET

Condition: new, color: grey, Empty weight: 35.000 kg Dimensions (LxBxH): 360 x 360 x 1250 cm Cargo space capacity: 384.000 l Number of fillers: 2 500 Tonness CAPACITY BOLTED CEMENT SILO TECHNICAL SPECIFICATIONS SILO CAPACITY 500 TONS, 385 m³ (cement density as 1,3 ton/m³) SILO HEIGHT 19.945 mm SILO DIAMETER Ø 6.180 mm QUANTITY OF SILO LEGS 6 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 250 SILO WEIGHT 28.000 kg(Wtih Legs:35000kgs) MATERIAL OF SILO LEGS Ø273 x 12 mm STEEL PIPE SUPPORTS OF SILO LEG NPL 80 mm CORNER IRON SHEET METALS OF SILO LEG 20 mm CONICAL PART SUPPORT MATERIAL 200 mm STEEL C CHANNEL CONICAL PART MATERIAL ST- 37, 8 mm SHEET METAL SILO BODY MATERIAL ST -37, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL ST -37, 6 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS. Dwjdpfx Asx D Dbdsb Tsf Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns

Condition: new, color: grey, Empty weight: 35.000 kg Dimensions (LxBxH): 360 x 360 x 1250 cm Cargo space capacity: 384.000 l Number of fillers: 2 500 Tonness CAPACITY BOLTED CEMENT SILO TECHNICAL SPECIFICATIONS Dedpfex D Dayox Ab Tswf SILO CAPACITY 500 TONS, 385 m³ (cement density as 1,3 ton/m³) SILO HEIGHT 19.945 mm SILO DIAMETER Ø 6.180 mm QUANTITY OF SILO LEGS 6 SILO OUTPUT DIAMETER Ø 300 mm NUMBER OF COMPONENTS 250 SILO WEIGHT 28.000 kg(Wtih Legs:35000kgs) MATERIAL OF SILO LEGS Ø273 x 12 mm STEEL PIPE SUPPORTS OF SILO LEG NPL 80 mm CORNER IRON SHEET METALS OF SILO LEG 20 mm CONICAL PART SUPPORT MATERIAL 200 mm STEEL C CHANNEL CONICAL PART MATERIAL ST- 37, 8 mm SHEET METAL SILO BODY MATERIAL ST -37, 8 - 6 - 5 mm SHEET METAL SILO TOP COVER MATERIAL ST -37, 6 mm SHEET METAL CHARGING PIPE 4" STEEL PIPE UP TO SILO LEG INNER MANHOLE IS PRESENT OUTER MAN HOLE IS PRESENT SILO ROOF INCLUDES HANDRAILS MAINTENANCE PLATFORM IS PRESENT STRUCTURAL ANALYSIS IS MADE FOR THE SILOS AND MANUFACTURING PROCESS DEPENDS ON APPROVED PROJECTS. Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 140 microns

Condition: new, Empty weight: 18.600 kg Dimensions (LxBxH): 365 x 365 x 2500 cm Cargo space capacity: 220.000 l Thickness of tanker walls: 6 Thickness of end walls: 5 mm Thickness of partition walls: 4 Number of fillers: 2 1. SILO CAPACITY: 2000 TONNES 2. SILO HEIGHT: 258110 mm(With 3 Meters Concrete Frame) 3. SİLO DIAMETER: Ø 12 300 mm 4. QUANTITY OF SILO LEGS: 4 5. SILO OUTPUT DIAMETER: Ø 500 mm 7. SILO WEIGHT: 110 600 kg 8. MATERIAL OF SILO LEGS: Ø500 x 18 mm STEEL PIPE Djdpfx Abox D A Sus Tjwf 9. SUPPORT OF SILO LEGS: NPL 80 mm 10. SHEET METALS OF SILO LEG: 20-25 mm 11. CONICAL PART SUPPORT MATERIAL: 100 mm STEEL C CHANNEL. 12. CONICAL PART MATERIAL: ST- 37, 6 mm SHEET METAL(S265) 13. SILO BODY MATERIAL: ST -37, 5-4 mm SHEET METAL 14. TOP COVER MATERIAL OF SILO: ST -37, 4 mm SHEET METAL. 15. INNER MAN HOLE IS NCLUDED.(Optional) 16. OUTER MAN HOLE IS INCLUDED. 17. SILO ROOF INCLUDES PAREPETS. 18. MAINTENANCE PLATFORM IS INCLUDED. 19. CHARGING PIPE: 4’’ PIPE UP TO SILO LEG. 20. PLATFORMS AND SERVICE LADDER FOR PLATFORM GALVANISED PNEUMATIC AND ELECTRICAL CONNECTION PERFORMED Painting : 1 layer of anticorrosive paint, 2 layers of FINAL COAT EPOXY PAINT , total paint thickness : 125- 140 microns

Condition: new, Empty weight: 290.000 kg Cargo space capacity: 3.000.000 l Productivity: 200 tph 1.1 COLD AGGREGATE FFEDING CHASSIS 4 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 0 Dedpex D A Rqofx Ab Tswf 2.9 Filler stock silo 25 M3 1 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 1 Set 3.5 Filler Screw Conveyor 1 Set 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 30 Ton capacity boiling oil heating isolation bitumen tank 3 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 30 Ton capacity boiling oil heating isolation bitumen tank 3 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.500.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET

Condition: used, New: Yes Colour: Blue Field of application: Mining Empty weight: 35.000 kg Dimensions (LxBxH): 1400 x 400 x 250 cm Runnning hours: 16777215 mh Volume of the tank: 30 m^3 Capacity: 350 Productivity: 300 tph (1400 x 14000) Double Washing Screw: (With SKF AUTOMATIC LUBRICATION) Water Consumption : Minimum 100 Ton/Hour – Maximum150 Ton/Hour Capacity 300-350tph Dwodex D A E Ijpfx Ab Tef Screw Dimensions Ø1400 x 14.000 mm Motor :2x45/55 KW Drive System :Chained Drive System Roller : SKF Abbrasive : 6 mm on iron plate 10 mm Rubber Coated Discharge : Ø200 mm Pipe Discharge Channel : 2 PCS 120 mm 150 mm 5mm U Bend Platform : Ladder for Pre Maintenance and Safety Weight 35000kg Paint PPG or Jotun 2 Layer Paint on1 layer Epoxy Lining RPM 25 Degree 15 Dimensions 4400x15500x2600mm Housing Bearing Water Resistance SKF-FAG BEARING 6 PCS